|
| 1 | PART-A (CIVIL WORK) :Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. |
| 2 | Providing and laying of plain cement concrete 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) Including mixing laying, curing, consolidation excluding side shuttering etc., complete, supply of all materials, labours, tools & plants and all other charges etc., complete. |
| 3 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 4 | Foundation & Plinth |
| 5 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels,bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 6 | Supplying , cutting , bending , binding , placing in position Fe 500 grade steel reinforcement ofHYSDtor steel/TMT bars of make SAIL/VIZAG Steel/RINL/TATA-TISCON/ JINDAL for R.C.C work at all heights as per drawing and as directed including supply of binding wire of approved first quality & thickness, cost of all materials, labour, tools and plants and all other charges etc. complete for all works. |
| 7 | Filling available excavated earth (excluding rock) in trenches, plinth, sides offoundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m |
| 8 | Centering and shuttering including strutting, propping etc. and removal of form Work.Lintels, beams, plinth beams, girders, bressumers,cantilevers Weather shade, Chajjas, corbels etc., including edges |
| 9 | Providing and Fixing factory made UPVC door frame, made of PVC exturded sections, of size 65 mm x 55 mm with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame to be mitred cut and jointed with plastic brackets and stainless steel screws, reinforcing hinge side vertical of the frames with PVC profile of Size 28 mm x 30 mm having wall thickness 2 mm (±0.2 mm), including providing & fixing 3 nos of 125 mm long stainless steel hinges to the frame, fixing the frame with jamb with required number & size of anchor dash fastners, all complete as per manufacturer\"s specification and direction of Engineer-in-charge. |
| 10 | Door Frame |
| 11 | Providing and fixing 37 mm thick factory made PVC door shutter, styles and rails made of PVC hollow section of size 100 mm x 37 mm with wall thickness 2 mm (± 0.2 mm), with inbuilt bead on one side, styles and rails mitered cut and joint at the corners by means of 2 nos of plastic brackets of size 75 mm x 220 mm at each corner and stainless steel screws, reinforcing the hinge side of style by inserting PVC profile of size 28 mm x 30 mm, with wall thickness 2 mm ( ± 0.2 mm). Lockrail of size 100 mm x 37 mm, wall thickness 2 mm (+ 0.2 mm) will be fixed to the vertical styles. Providing with PVC snapfit beads and panel of size 100 mm x 20 mm, and inserting 2 nos tie bar of 6 mm dia and fastening with nuts and washers complete, all as per manufacturer\"s specification and direction of Engineer-in-charge. |
| 12 | Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Casement window single panel with S.S. friction hinges (300 x 19 x 1.9 mm), made of (small series) frame 47 x 50 mm & sash 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glass pane glazing bead of appropriate dimension. (Area of window upto 0.75 sqm.) |
| 13 | Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. (Only weight of grill to be measured for payment). |
| 14 | Plastering the exposed surface of concrete faces and brick wall masonry at all heights with cement mortar 1:3 (1 cement 3 fine riversand/M-sand of approved first quality) to the required thickness of 15 mm thick in one layer including scafolding, curing, making rough the smooth surface, supply of all materials, labour, tools and plants,and all other charges etc. complete. |
| 15 | Outside Plastering in CM 1: 3 |
| 16 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. |
| 17 | Providing & fixing on roof pressed clay tile (Mangalore tile) of 20 mm nominal thickness and of approved size and as per approved pattern on steel frame work complete (steel frame work to be paid separately). |
| 18 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Tubular Truss for roofing with 1\" Flat as locking beading as per tiles manufacturers spacing 30cm (C/C) approx. Rafter and Purlin @ 60 cm (2\") spacing. Hot finished welded type tubes |
| 19 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade,Two or more coats on new work |
| 20 | Providing and fixing water supply line in CPVCpipes including all G.I fittings like Elbow,Tee etc., fixing in walls, ceiling with necessary G.I Clamps, Screws and laying of pipes in trenches of dia varying from 20 mm to 40 mm dia as and directed. Supply of all materials,labours,tools and plants etc., Complete. |
| 21 | 25 mm dia CPVC pipe |
| 22 | 32mm dia CPVC Pipe |
| 23 | 50 mm nominal dia CPVC Pipes for Inlet and Outlet OHT |
| 24 | Providing and laying factory made chamfered edge 60mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. |
| 25 | Providing and fixing stainless steel ( Grade 316) railing made of Hollow Stainless steel hand rails fabricated out of 316 grade stainless steel flats and tubes, |
| 26 | Providing and fixing water supply fittings( JAGUAR/CERA)with all necessary fixtures and specials of approved first quality brand/manufacturer,colour(ISI make) as per the following items including all materials, labours, tools & plants and all other charges etc complete. |
| 27 | P/F CP Brass 15 mm dia tap ( Long body) |
| 28 | P/F CP Brass 15 mm dia bib cockTap |
| 29 | P/F CP Brass 15 mm dia Stopcock |
| 30 | P/F.C.P brass 15 mm dia Pillar cock:- |
| 31 | P/F.C.P brass 15 mm dia Angle cock:- |
| 32 | P/F PVC 15mm dia Flexible connection pipe for wash basin |
| 33 | P/F 20mm dia CPVC Ball valve |
| 34 | P/F 25 mm dia CPVC Ball valve |
| 35 | P/F 32 mm dia CPVC Ball valve |
| 36 | Providing & fixing in position Phenol bonded Bamboowood wall cladding at all height with planks of sizes 10mm thick, minimum 1800mm length andminimum 100 mm wide, in approved colour, texture and finish, having Performance Appraisal Certificate (PAC) issued by Building Materials & Technology Promotion Council (BMTPC), with necesasary profiled edges fixed with 40mm SS screws 5 nos in each tile to frame work made of second class teak wood of size 20x15 mm in centre of each tile and bottom and top of work height, 40x15mm placed at ends of each tile. The cladding shall be laid over backlayment of 1.00 mm thick expanded polyethylene foam of density 40kg/cum in two layers, first layer on wall surface before fixing wooden frame and second layer on frame under cladding. The bamboowood planks shall have minimum density of 1000 Kg/cum & minimum Hardness 1000 Kgf. with Eco friendly UV coating, all complete as per direction of the Engineer in-charge. |
| 37 | Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer\"s specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks) |
| 38 | Providing and fixing 15 cm wide, 45 cm overall semi-circular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete,0.80 mm thick with zinc coating not less than 275 gm/m². |
| 39 | Providing and fixing thermal insulation with Resin Bonded Fibre glass wool conforming to IS: 8183 having density 24 kg/m3, 50 mm thick, wrapped in 200G Virgin Polythene Bags fixed to wall with screw, rawel plug & washers and held in position by criss crossing GI wire etc. complete as per directions of Engineer-in-Charge. |
| 40 | Providing and laying 120 mm thick compacted bed of dry brick aggregate of 40 mm thick nominal size including spreading, well ramming, consolidating and grouting with jamuna sand, including finishing smooth etc. complete as per direction of Engineer in- charge. |
| 41 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. |
| 42 | Providing of Dining table is rectangular in shape. The dining table Size of (1350 X 840 X 730 MM) and Chair Size of (400 X 570 X 870 MM) set is made of good quality plastic which makes it durable and strong. The table is light in weight and is sufficiently spacious to properly hold a large number of plates and dishes. With a neatly polished surface, it definitely gives your decor a classy touch, suitable for your family meals or even when you have guests over. |
| 43 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board,610x510 mm bowl depth 200 mm |
| 44 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 45 | Supplying and stacking of good earth at site including royalty and carriage upto 5 k m lead complete (earth measured in stacks will be reduced by 20% for payment). Mixing earth and sludge or manure. in the required proportion specified or directed by the Officer-in-charge Spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer-in-charge (cost of vermy composite , dump manure and/ or good earth to be paid separately).including fine dressing of ground |
| 46 | Supplying vermi compost at site including cost of materials,labours and tranportation etc., Complete. Mixed with cow manure. |
| 47 | Digging of pits in ordinary soil to depth of 30 × 30 x 45cm and filling the red earth mixed with vermi compost etc., complete.including cost of supply of all labours, materials, tools & plants,diesel and all other charges etc. completc. |
| 48 | Providing and planting border plants like Mini Ixora / Mini Tecoma / Mini Neerium / Ruslilia / Asparagus / Mini Acalypha etc., including forming trenches and filing with mixed earth and vermi compost etc., complete |
| 49 | Providing and planting Aracaria / Furcuria / Cycas etc., Supply of all materials, labours,tools and plants, transportation etc., Complete. |
| 50 | Providing lawn with korean grass as per layout plan and as directed. including application of fertilizer and pesticides before planting. Supply of all materials, labours, tools and plants transportation etc., Complete. |
| 51 | Providing and planting flowering shrubs like Ixora / Hibiscus / Neerium / Nandiavattai / Tecina and tree saplings like Cardia / cassia / baubinia etc including making pit and back filling red earth with vermi composit, Supply of all materials, labours,tools and plants,transportation etc., Complete. |
| 52 | Supplying potted plants in pots Supply of all materials, labours, tools and plants, transportation etc., Complete |
| 53 | Providing and planting cycad (sago palm)including excavation of pit, planting, backfilling earth mixed with vermi composit Supply of all materials, labours, tools and plants,transportation etc., Complete |
| 54 | Supplying good quality hose pipe of length 30mtrs. (one roll) of approved quality Supply of all materials, and transportation etc., Complete |
| 55 | Maintenance of lawn and plants from the date of planting which includes watering, weeding application of fertilizers, pesticide, nematicides, fungicides at periodic intervals and replacement of casualties etc complete. ( supply water separate) |
| 56 | Supply and fixing of Natural stone Ornament seater |
| 57 | Supplying and fixing of Children Park Play Equipment as given in photo attached, Size: 7feet of single piece equiment paint in multi colour steel equipment,.The cost inclusive of all material, labour, transportationetc complete. |
| 58 | Supplying and fixing of Iron Kids Play Coach Swings, as given in photo attached . The cost inclusive of all material, labour, transportationetc complete. |
| 59 | Suplying and fixing of Stepper for kids size of 10 x 2.7 x 8.5 ft., paint in multi colour steel equipment, as given in photo attached . The cost inclusive of all material, labour, transportationetc complete. |
| 60 | Supplying and fixing Metal Royal Play Equipment Children Swing Set , made from suyoperior quality of raw materialas per manufacturer specification and as given in photo attached . The cost inclusive of all material, labour, transportationetc complete. |
| 61 | Supply and fixing ofkids play equipment from its ground level connected with four nos. of equipment 1no. FRP slide should have length 2.4m X 0.5m. Shall be made by FRP 5mm thickness. Platform should be made by n16g thickness in steel frame and covered by FRP non skid sheet seat is 5mmthickness in FRP, and as given in photo attached in all layers of P.U paint in multi colour steel equipment. The cost inclusive of all material, labour, transportationetc complete. |
| 62 | Supply and fixing of Multicolour 4 seater FRP Four seated sea saw, size:5ft X 8Ft X 1.5Ft manufactured using heavy plastic material to provide a robust and stable platform. The height of the seesaw station can be adjusted, and as given in photo attached .. The cost inclusive of all material, labour, transportationetc complete. |
| 63 | Supply and fixing of Delux Merry go Round playpro Green and brown kids play equipments size:Approx 5 feet dia 4 Seater manufacturer and supplier of premium quality of Playground Delux Merry Go Round and other playground equipment as given in photo attached .The cost inclusive of all material, labour, transportationetc complete. |
| 64 | PART-B (ELETRICAL WORK):Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. |
| 65 | 6Module (200mm * 75mm) |
| 66 | 12 Module (200mmX150mm) |
| 67 | Supplying and fixing following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. |
| 68 | 5/6A switch |
| 69 | 15/16A switch |
| 70 | 3 pin 5/6A socket outlet |
| 71 | 6 pin 15/16 A socket outlet |
| 72 | Supplying and fixing 3 pin, 5A ceiling rose on the existing junction box/ wooden block including connections etc. as required. |
| 73 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. |
| 74 | Supplying and fixing modular blanking plate on the existing modular plate & Switch boxexcluding modular plate as required |
| 75 | Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required. |
| 76 | Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required. |
| 77 | Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. |
| 78 | Up to 450mm Sweep |
| 79 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required. |
| 80 | 25 mm |
| 81 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. |
| 82 | 2 x 1.5 sq. mm |
| 83 | 3 x 2.5 sq. mm |
| 84 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted\ including earthing etc. as required. (But without MCB/RCCB/Isolator) |
| 85 | 6 way, Double door |
| 86 | 12 way, Double door |
| 87 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 88 | Single pole 10A |
| 89 | Single pole 16A |
| 90 | Supplying and fixing following rating, double pole, 240 V, isolator in the commissioning etc. as required. existing MCB DB complete with connections, testing and Commissioning etc. as required. |
| 91 | 40 A |
| 92 | Supplying and fixing following rating, double pole, (single phase and neutral), 240V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 93 | 40 A |
| 94 | Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. |
| 95 | Laying of one number PVC insulated and PVC sheathed /XLPE power cable of 1.1 KV grade of following size direct in groung including excavation, sand cushioning, ptrotective covering and refilling the trench etc., as required. |
| 96 | Up to 35 Sqmm |
| 97 | Supply of 18watts LED False ceiiling fittings (Gem Product id No: 5116877-97501688828) |
| 98 | Supply of 30watts LED flood light (Gem Product id No: 5116877-40163780419) |
| 99 | Supply of Ceiling Fan, Electro-phoretic lacquered/ Electroplated surface for anti-rusting, High speed fan with wider tip blade for effective air circulation with Sweep 1200mm and Hight performance even at low voltage. (Gem Product id No: 5116877-15664471967) |
| 100 | Supply of 200mm Exhaust Fan (Gem Product id No: 5116877-20849308386) |
| 101 | Supply of 25 watts LED street Light fitting (Gem Product id No: 5116877-93033136733) |
| 102 | Supply of 4core X 10sqmm Copper armoured PVC insulated/PVC sheathed XLPEpower cable from Powerhouse to Main DB (Gem Product id No: 5116877-71326010447) |
| 103 | Supply of 2core X 6sqmm Copper armoured PVC insulated/PVC sheathed XLPEpower cable form Main DB to Cafeteria (Gem Product id No: 5116877-90757234112) |
| 104 | Supply of 2core X 2.5sqmm Copper armoured PVC insulated/PVC sheathed XLPEpower cable as required. (60Mtrs for Ticket counter,150 mtr for 2Nos Street Lights) (Gem Product id No: 5116877-47895332362) |
| 105 | Supply of 8 SWG Bare Copper wire for earthing |
| 106 | Labour charge for laying 8 SWG wire from Earth bit to Distribution box through pvc pipe with clamp. |
| 107 | Supply and Installation 2.5\" Dia Class \"C\" GI pipe (as per drawing) alongwith applying 1 coat primer and 2 coat aluminium paint (each 20 feet) (2Nos. X 10 feet) |
| 108 | Supply and Installation of 1\" threaded \"C\" Class pipe of length alongwith applying 1 coat primer and 2 coat aluminium paint. (2Nos. X 3 feet) |
| 109 | Supply and Installation of 2.5\" to 1\" GI reducer alongwith applying 1 coat primer and 2 coat aluminium paint. |
| 110 | Supply and Installation of 8mm thick MS Plate of size 300x300mm (approx. 10Kg each) for Base plate of Street light Poles including gas cutting charges in required size (2Nos x 10Kg = 20Kg) |
| 111 | Supply and fixing of SMC Pole mounted Junction Box (200X140X95mm) with 6 amps Single pole MCB, side hinged door, IP55 with necessary clamps/ Strip, SS screws/Nut and blot, etc., |
| 112 | Fabrication of Street light Poles by Cutting, theading, bending and welding with MS base plate, making holesof 2.5” GI pipe (as per drawing) |
| 113 | CI cable routing marker with leg for showing where the cables laid. |
| 114 | Civil Masonary work for making 2’ x 2’ x 2’pit, erection of pole, and concrete in the ratio of 1:3:4 and 1.5’ x 1.5’ x 1.5’ height brick work and complete plastering for inclusive of material and Labour for Street Light. |
| 115 | Electrician (Labour) Charges for wiring of street lights and fitting luminaries, etc., 2Nos for street Lights including wiring materials |
| 116 | Design, fabrication, Supply, Installation, testing and commissioningof wall mounted type LT Distribution panel, Fabriated out of 16SWG CRCA Sheet not less than 2mm thick, powder coated, dust/vermin proof, compartmentalized with hinged doors comprissing of the following provisions. with incomer andoutgoing with followingsingle front, fixed type Outdoor type, Power Control Panel and Epoxy based powder coating of Colour Siemens Gray. (As per the Line diagram),63A, 4Pole, Islolator - 1 No. With 3 Nos. 63Amps 3Phase, Phase selector switch,Digital 63 Amps 3 phase Energy meter ,Digital VAF(Multifuction) Meter along with necessary CT & PT OUT-GOING FEEDERS:Single Pole 10AMCB - 2 Nos. Per phase (Total 6Nos), Single Pole 20A MCB - 1 Nos. Per phase (Total 3 Nos) |
| 117 | Miscellaneous items for the purchase of SS screws, Bolts, Nuts & Washers, drill bits, cable ties, 25mm PVC bends, tees, 1,2,3,4 way junction boxes, Cutting plates, 12 mm Fan hooks, Fan rod for extension, wire strippers, steel spring, pvc junctions boxes, SS Clamp, Cable Gland, Copper Lugs, PVC Channel, PVC Hose, PVC Pipe for required path way/Road crossing etc., |
