Military Engineer Services-MES has published Tender For Repairs Replacement To Road Side Benches Foot Path Road Side Boards And Other Misc Works Under Age Br Ii Of Ge Nw Vasco. Submission Date for this Tender is 09-05-2023. RCC Bench Tenders in vasco Goa. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) including chequered tiles etc complete all as specified and as directed. |
| 2 | Demolition of brick/ blockor laterite stone masonry in cement mortar incl coping etc.complete all as specified and as directed. |
| 3 | Dismantling iron or mild steel work of any description not otherwise provided for complete all as specified and as directed. |
| 4 | Dismantling Plain or corrugated steel sheeting,any gauge, thickness, includingNainital or similar pattern roof coverings complete all as specified and as directed. |
| 5 | M & L for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensilestrength of 550 Mpa as in roof covering/cladding towall, fixed with self tapping screws complete all as specified and as directed. |
| 6 | S&F Pre- painted galvatume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 7 | M&L for PCC (1:2:4) type B1 using 20mm graded aggregate, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and as directed. |
| 8 | M & Lfor Pre - cast cement concrete block masonry with solid blocks of Grade C-1( using 20mm graded stone aggregate) exc. 10 cm in width as in wall built in cement mortar 1:6 complete all as specified and as directed. |
| 9 | Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc.complete all as specified and as directed. |
| 10 | M&L forrendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:6 to be finished even and smooth (without using extra cement) complete all as specified and as directed. |
| 11 | M&L preparing new plastered surfaces of wall and applying three coats of white wash to match with existing surface complete all as specified and as directed. |
| 12 | M&L PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in fdn, filling and mass concretecomplete all as specified and as directed. |
| 13 | S&F of MSplates (plain or chequered) channels, square cut or notched with revited, bottle or welded attachement etc complete (Fe 410-W(Gde E-250) quality A) complete all as specified and as directed. |
| 14 | M&L for PCC (1:3:6) type C1 using 20mm graded aggregate as in hard standing 100mm thick with necessary form work etc complete all as specified and as directed. |
| 15 | M&L for PCC (1:2:4) type B1 using 20mm graded aggregate as finishing coat 25mm thickfinished even and smooth without using extra cement etc complete all as specified and as directed. |
| 16 | Forming construction joints 30mm deep x 10mm wide filled with sealing compound of grade "B" complete all as specified and as directed. |
| 17 | Forming contraction (Dummy) joints 50mm deep x 10mm wide filled with sealing compound of grade "B" complete all as specified and as directed. |
| 18 | Finishing surface of concrete by brooming while concrete is green complete all as specified and as directed. |
| 19 | M&L for laying rubber moulded machine pressed precast concrete interlockingpaver blocks 60mm thick, of any shape, colour and size confirming to IS 15658-2006 with gray cement and pigment, M-35 Grade complete all as specified and as directed. |
| 20 | M&L laying sand for cushion bed includingspreading levelling in layers n.exc 25 cm thick,watering and consolidations for Paver blocks complete all as specified and as directed. |
| 21 | Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and as directed. |
| 22 | M&L 75mm thick cement concrete 1:3:6 type C1 using 20mm graded stone aggregate, as in plinth protection or in similar work finished even and smooth without using extra cement complete all as specified and as directed. |
| 23 | M&L coloured chequered concrete tiles 22- 25mm thick set and jointed in coloured cement as in floors/pavingswith gray cement and no pigment complete all as specified and as directed. |
| 24 | Screed bed or bedding layer of cement mortar 1:6, 15mm thick for laying floor tiles complete all as specified and as directed. |
| 25 | Dismantling floor, hearth or wall tiling incl cement mortar bedding ( but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 26 | S&F mild steel CRS TMTbars 6mm to 8mm dia, cut to length, bend to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc complete complete all as specified and as directed. |
| 27 | M&L forprecast cement concrete (1:2:4) type B1, using (20mm graded stone aggregate) as in cover slab for manholes, etc set in CM (1:6) including necessary use and waste of formwork complete all as specified and directed. |
| 28 | Excavating in post holes (or similar holes) each n.exc 0.5 cum, getting out returning filling in and ramming earth or broken rubble mixing with earth around, in layers n.exc 25 cm, watering and removing surplus soil to a distance n.exc 50m and making good surface in soft/disintegrated rock complete all as specified and as directed. |
| 29 | M&L Preparing new steel surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over one coat of Red oxide, zinc chrome primer complete all as specified and as directed. |
| 30 | M&L for preparation of old painted surfaces of wall and applying one coat of synthetic enemal paint over plastered surfaces as in Kerb or similar complete all as specified and as directed. |
| 31 | M&L for preparation of old painted surfaces and applying one coat of indigo floor coat emulsion paint (platinum series) of any other equivalent make as approved by GE complete all as specified and as directed. |
| 32 | M& L for painting Steel old surface of any description, over 10cm in width or girth, not otherwise described (two coat of synthetic enamal paint including preparation of surface) complete all as specified and as directed. |
| 33 | S&F FRP Bench of heavy dutyout door type3 seater ASIN : B07S1WFKLW of following description : Cas iron leg support Weighing 17 Kg per leg painted with paint of any colour 8 x 5 Ft long 4mm thick FRP slat strong enough to hold weight up to 350 kg distributed accross length nuts and bolts and plastic caps for FRP slats will be supply along the product comes in knock down condition for easy for transportation and assembly will be provided by firm/ manufacturerecomplete all as specified and as directed. |
| 34 | S & F forACP boardrefflective type (Both / single side letter writing work) Information / Sign Board and fixed in SS frame including necessray arrangement with Recto Reflective redium selfadhesivesheet of any color over ACP board on one or both side including writing letter efflorecent(Refflective Type) Comma , Arrowmarkor any other Symbol with approved color on ACP sheet board of any size with suitable width Refflective typecomplete all as specified and as directed. |
| 35 | S&F for SS frame work grade SST 304 for fixing ACP board as per manufacturer"s instruction complete all as specified and as directed. |
| 36 | M&L for Plain Cement Concrete Type C2 1:3:6 (using 40 mm gradedstone aggregate) in foundations, filling and mass concrete complete all as specified and as directed. |
| 37 | S & F Mild steel rolled sections as in framing for cladding, verticle member ,glazing and the like fixed with angle cleats and connecting plates, etc. complete all as specified and as directed |
| 38 | S & F in repair Polycarbonate Convex Mirrors have high mirror thickness & reflectivity of size 80cm x 80cm Ideal for usage at Blind Spots providing viewing angle of 130 degrees with FRP brim and back holding plates complete all as specified and as directed. |
| 39 | M&L Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running railsand guides for sliding doors; fixed with angle cleats or otherconnecting plates of Fe-290 (Gde E-165) complete all as specified and as directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
