Amrut-Amrut 2.0 Piravom Muncipality-Providing New Submersible Pumpset At Kakkad Wtp Pumping To Kompanamala Glsr And Allied Works-Pipeline Work
Tender Value
5.83 Lakhs
Estimated cost
Bid Submission
27 Apr 2023
0 days left
EMD
14578
Bank guarantee accepted
Document Fee
1290
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
piravom → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Amrut-Amrut 2.0 Piravom Muncipality-Providing New Submersible Pumpset At Kakkad Wtp Pumping To Kompanamala Glsr And Allied Works-Pipeline Work
BOQ
| Sl. No. | Item Description |
| 1 | Providing new 20 HPsubmersible pumpset at kakkad WTP Pumping to Kompanamala GLSRand allied works |
| 2 | OD152673/2022-2023:Supply, erection, and commissioning of open well submersible pump set with the following specification 1. Pump -Supply, erection, testing, and commissioning of KWA prequalified reputed make submersible pump sets with Bronze impeller, SS shaft, and CI pump casing with suitable types base plate with coupling, coupling guard foundation bolts&nuts etc. complete including providing suitable concrete foundation including the cost of cement sand metal etc. complete. Discharge -16 lpsTotal head - 80 M Length pumping main -5000 M Size of pumping main - 150mm DI K9, 2. Motor Supply , erection, testing and commissioning of KWA prequalified reputed make horizontal solid shaft foot mounted TEFC squirrel cage induction motor suitable for the above pump working 3 phase 50 Hz Ac supply, working voltage 415. Th motor shall confirm to EEF1/IS 325 . Flexible/solid coupling shall be used for coupling of pumps and motors. 3. Starter Supply , erection ,testing and commissioning of suitable rating Fully automatic star delta starter with air break contact .Starter suitable for the above motor with over voltage and under voltage protection , single phase preventer, over load under curent dry run protection, phase unbalancing with motor protection realy as per IE rules and code of practice etc. complete. 4. Panel board (Suitable for operating two pump sets but one pump set at a time) Supply , erection,testing and commissioning of cubical type wall mounted MS fabricated dust and vermin proof common control panel board consisting of 1 No. 160A suitable capacity motor protection MCCB as incomer and providing suitable size Aluminium bus bar to interconnect the above MCCBs and fitted with 3 Nos of indicator lamps,1 No.volt meter with selector switch ,1 No.Ammeter with selector switch for measuring current in each phase etc.complete and provided with a common earth bus for the entire panel and inter connect with the MCCBs as per IE rules and code of practice.The panel shall be fitted on a common base frame on the suitable foundation. 5. Cabling Supply, laying testing and commissioning of suitable size XLPE copper cables for the above pump set from panel board to the starter and from starter to motor considering energy conservation. 6. Earthing Supply of all materials and providing suitable earthing by using suitable size pipe /plate earthing GI/copper strip buried in the ground and giving double earthing to the motor, starter, panel board etc. as per IE standards.7. Capacitor Supply, erection testing and commissioning of heavy duty APP capacitor for the motor to get a power above 0.95. Capacitor connected to external contact,The capacitor shall confirm to IS 28348. 8.Valves supply of suitable size best quality heavy duty ISI marked CI double flanged sluice and non return valve with suitable pressure rating . Fitting of valves shall included proper RCC support especially for non return valves . In case of positive suction 9. Suction and delivery pipe connection Supply and fittings of suitable size best quality GI/MS pipe of shell thickeness not less than 8 mm for a total of 10 M. suitable for the above pump set and suitable size foot valve and connecting the suction pipe and valve with suitable flanges, nut &bolt IR sheet etc.complete and connecting the delivery side of the pump with the valves and suitable specials to connect with the pumping main. |
| 3 | OD152674/2022-2023:Supply and drawing 10 Sq.mm 3 core 1100 V grade FRLS PVC insulated stranded copper conductor cables conforming to IS 694 part I 1990 in the existing surface / recess conduit as required including giving necessary connections of the following sizes, including cost of cable , pvc conduit and all labour charges. |
| 4 | OD152675/2022-2023:Pump -Supply, erection,testing and commissioning of KWA prequalified reputed make cerifugal pumpsets with Bronze impeller , SS shaft and CI pump casing with suitable types base plate withcoupling,coupling guard bolts&nuts etc. . complete,Discharge 19 lps total head - 14 M . 2.Motor Supply , erection, testing and commissioning of KWA prequalified reputed make horizontal solidshaft foot mounted induction motor suitable for the above pump working 3 phase 50 Hz Ac supply,working voltage 415 duty condition S1. The motor shall confirm to EEF1/IS 325 including providingsuitable foundation.. 3. Starter - Supply , erection ,testing and commissioning of suitable rating starter.Starter suitable for the above motor with over voltage and under voltage protection , single phasepreventer, over load, relay as per IE rules and code of practice etc. complete. .4. Cabling - Supply, layingtesting and commissioning of suitable size copper cables for the above pump set from panel board tostarter and from starter to motor considering energy conservation.5. Earthing - Supply of all materials andproviding suitable earthing by using suitable size pipe /plate earthing GI/copper strip buried in ground andgiving double earthing to motor, starter , panel board etc. as per IE standards.6. Capacitor - Supply,erection testing and commissioning of ultra heavy duty APP capacitor for the motor to get a power above0.95. The capacitor shall confirm to IS 28348. 7.Valves -supply of suitable size best quality heavy duty ISImarked CI double flanged sluice and non retutn valve with suitable presure rating ad foot valve . Fitting ofvalves shall included proper RCC support especially for non return valves 8. Supply and fixing pressuregauge with control valve. 9.Suction and delivery pipe connection Supply and fittings of suitable size bestquality GI/MS pipe of shell thickeness not less than 8 mm for a total of 10 M. suitable for the above pumpset and suitable size foot valve and connecting the suction pipe and valve with suitable flanges, nut &boltIR sheet etc.complete and connecting the delivery side of the pump with the valves and suitable specialsto connect with the pumping main |
AI Tender Summary
Tender Timeline
Apr 19, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedApr 27, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedApr 29, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender