|
| 1 | S & F Solid PVC Wall Lining consisting of 5mm thick wood grainprinted PVC sheet used instead of plaincolour sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications complete all as specified and as directed. |
| 2 | 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification complete all as specified and as directed. |
| 3 | Demolition of cement concrete (unreinforced) in ground floors and paving n. exc. 15 cm thickness (below or above ground level) complete all as specified and as directed. |
| 4 | M&L for Vitrified ceramic light shade tiles, 10 mm thick (square/ rectangular) polished ,area of each tile not exc. 0.36 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer of cement mortar 1:6complete all as specified and as directed. |
| 5 | M&L for 25mm thick Cement concrete 1:2:4 type B-O(using 12.5mm graded aggregate) as in flooring, finished surfaces even and smooth without using extra cement complete all as specified and as directed. |
| 6 | Dismantling boarding, any description, fixed in any position with nails complete all as specified and as directed. |
| 7 | Taking down complete removal of existing treatment, washing, rubbing down and stopping of distempred and painted surfaces on walls complete all as specified and as directed. |
| 8 | M&L for taking down cement plaster, any description, including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and as directed. |
| 9 | M&L for rendering 15mm thick in cement mortar 1:6 onsurfaces other than fair face of brick work of walls, finished even & smooth without using extra cement complete all as specified and as directed. |
| 10 | M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over 2mm thickplaster of paris putty over plastered surface to prepare surface even and smooth complete all as specified and as directed. |
| 11 | M & L for preparing old plastered surfaces and applying two coat of oil bound distemper on wall over 1mm thick birla white putty and making surface smooth having no sign of brush marks complete all as specified and as directed. |
| 12 | M&L for preparing old plastered surfaces of ceilings and applying two coat of white wash complete all as specified and as directed. |
| 13 | S&F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and as directed. |
| 14 | S&F5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and as directed. |
| 15 | S&F GI Powder coated GI Snap Grid Frame Work of size 605x605mm as in False Ceiling with supported hanging of Mild Steel Rod of\"J\" Bolt, complete all as specified and as directed. |
| 16 | S & F in repairs4 mm thick designer Fibre cement board ( E-board) Tile of size 595x595 mm of approved texture, blossom, fixture and primerfinished complete , complete all as specified and as directed. |
| 17 | M&L for Glazed ceramic colored tiles in vertical surface 450x350x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to matchoverand including 10mm screed bed of mortar of cement plaster (1:4) complete all as specified and as directed |
| 18 | Surface excavation in soft /loose soil not exceeding 30 cm deep and averaging 15 cm deep and getting out complete all as specified. |
| 19 | Excavation in trenches in soft/loose soil not exceeding1.5 metre wide and not exceeding 1.5 metre deep and getting out complete all as specified. |
| 20 | Excavation in trenches in soft/loose soilexceeding1.5 metre wide and exceeding 1.5 metre deep but not exceeding 3.0 metre and getting out complete all as specified. |
| 21 | Returning filling or Filling under floor, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm complete all as specified. |
| 22 | Removal of surplus soil to a distance not exc 50 metre and depositing where directed at a level not exc 1.5 metre above the startingpoint complete all as specified. |
| 23 | M&L for Hardcore of broken bricks of gauge n. exc 63mm, deposited spread and leveled in layers n exc 15 cm thick watered and rammed to a true surface complete all as specified.. |
| 24 | M&L for Plain cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in foundation filling as mass concrete or in sub base of floors complete all as specified. |
| 25 | M&L for treating bottom and sides of excavation at the rate of 5 litres of emulsion per sqm of surface area complete all as specified. |
| 26 | M&L for treating back fill in contact with foundation at the rate of 7.5 litres of emulsion per sqm of surface area complete all as specified. |
| 27 | M&L for treating top surface of filled earth at the rate of 5 litres of emulsion per sqm of surface area complete all as specified. |
| 28 | M&L for treating top surface of filled earth under plinth, ramp etc at the rate of 5 litres of emulsion per sqm of surface area complete all as specified. |
| 29 | M&L for treating soil along with external perimeter of building at the rate of 2.25 litres of emulsion per Rm of surface area complete all as specified. |
| 30 | M&L for Brick work in cement mortar 1:6 using sub class ‘B’ old size bricks, straight or curved on plan exceeding 6 metre mean radius complete all as specified. |
| 31 | M&L for Brick work in cement mortar 1:6 using Fly ash brick old size , straight or curved on plan exceeding 6 metre mean radius complete all as specified. |
| 32 | M&L for form work to sides of concrete foundation, base of columns upto plinth level, pedestals, plinth beams etc and similar works vertical or to batter with smooth surfaces complete all as specified. |
| 33 | M&L for form work to sides of concrete columns , piers and similar works vertical with fair surfaces complete all as specified. |
| 34 | M&L for form work to sides and soffits of concrete beams, cantilever and similar works with fair surfaces complete all as specified. |
| 35 | M&L for form work to soffits and sides of concrete slab, chajjas, roof projection etc and similar workswith fair surfaces complete all as specified. |
| 36 | M&L for Reinforced Cement concrete M-25(design Mix), type A-1 using 20mm graded stone aggregate as in footing of columns, raft, pedestals, plinth beams and the like complete all as specified. |
| 37 | M&L for Reinforced Cement concrete M-25 (design Mix), type A-1 using 20mm graded stone aggregate as in columns, piers and the like complete all as specified. |
| 38 | M&L for Reinforced Cement concrete M-25 (design Mix), type A-1 using 20mm graded stone aggregate as in beams, cantilevers, piece lintels and the like complete all as specified. |
| 39 | M&L for Reinforced Cement concrete M-25 (design Mix), type A-1 using 20mm graded stone aggregate as in chajja, facia and the like complete all as specified. |
| 40 | M&L for Reinforced Cement concrete M-25 (design Mix), type A-1 using 20mm graded stone aggregate as in slab and the like complete all as specified. |
| 41 | M&L for Mild steel 10mm dia and over TMT bars as in reinforcement cut to length bent to shape required including cranking, hooking at ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified. |
| 42 | M&L for Mild steel 8mm diaTMT bars as in reinforcement cut to length bent to shape required including cranking, hooking at ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified. |
| 43 | M&L for Mild steel 8mm diaTMT bars as in reinforcement cut to length bent to shape required including cranking, hooking at ends and binding with mild steel wire (annealed) not less than 0.9mm dia as in stirrups complete all as specified. |
| 44 | M&L for 75mm thick Plain cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as insub base of floors complete all as specified. |
| 45 | M&L for Glazed ceramic coloured (colour & shade as approved) tiles non skid of size 600x600x8mm thick as in floor set and jointed in neat cement slurry over and including 15mm thick screed in cement mortar (1:6) over 20mm thick PCC 1:2:4 type B-0 and pointed in white cement with pigment to match the colour of tiles complete all as specified. |
| 46 | M&L for Kota stone slabs, 20-25mm thick, machine cut as in steps (top & sides) of single length each, set and jointed in cement slurry over & including screed bed of 20 mm thick in cement mortar (1:6) and pointed in cement mixed with pigment to match the shade of slab including rubbing, cutting and polishing (mirror type) complete all as specified. |
| 47 | M&L for Glazed ceramic tiles, coloured (light colour as approved), of size 450x300x8mm thick on vertical surfaces such as in skirting/dado etc set and jointed in cement slurry over 10mm thick rendering in cement mortar (1:3) and pointed in white cement with pigment to match the colour of tiles complete all as specified. |
| 48 | M&L for Chequered cement concrete coloured tiles 25cmx25cmx25mm thick set with neat cement and pointed in grey cement mixed with pigment to match the shade of tiles over & including 15 mm thick screed in cement mortar (1:6) and 25mm thick PCC (1:2:4) type-B-0complete all as specified. |
| 49 | M&L for Cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in plinth course, coping, kerbs, tank platform and similar works, surfaces finished even and smooth without using extra cement complete all as specified. |
| 50 | M&L for Rendering/plastering, 15mm thick in cement mortar (1:4) on any face of brick walls or concrete surfaces, using WPC @ 2% by wt of cement, surfaces finished even and smooth without using extra cement complete all as specified. (WPC measured separately). |
| 51 | M&L for 12mm thick rendering in cement mortar (1:6) on any face of brick walls or concrete surfaces, finished even and smooth without using extra cement complete all as specified. |
| 52 | M&L for Rendering/plastering, 5mm thick in cement mortar (1:3) on concrete surfaces as in ceiling or in any position, surfaces finished even and smooth without using extra cement complete all as specified. |
| 53 | Supply only integral water proofing compound complete all as specified. |
| 54 | M&L for 3 mm thick APP modified prefabricated in five layers & weight not less than 3.6 Kg/Sqmwater proof memberance reinforced with non wooven polyster mat without aluminium paint over top surfaceof roofwith 10 cm longitudinal & horizontal overlapping and joints finally thermo fused with LPG flames laid over and including 1.20Kg/sqm industrial bitumen, bitumen primer at the rate of 0.30 Ltr/Sqm, 2 coats of heat resistance paint and 10mm thick plaster in CM (1:3) a tack coat of industrial coat of primer as per manufacturer instructions of APP modified membrance sheet complete all as specified as directed. |
| 55 | M&L for PCC 1:3:6 type C1 (20mm graded stone aggraded) as in plinth protection, 75 mm thick finishing cement concrete surface even and smooth ithout using extra cement including joints filling with 1:1 bitumen & sand mix complete all as specified as directed. |
| 56 | M&L for providing building number plate as per STD including numbering of building No given by MES at both ends complete all as specified as directed. |
| 57 | M&L for preparing new plastered surfaces of walls and applying two coats of oil emulsion distemper over a coat of primer and 1-2mm thick wall care putty complete all as specified. |
| 58 | M&L for preparing new plastered surfaces of walls and applying two coats of cement base paintover a coat of white wash complete all as specified. |
| 59 | M&L for preparing new plastered surfaces and applying three coats of white wash as in ceiling complete all as specified. |
| 60 | S&F pre-painted MS fan hook box complete all as specified. |
| 61 | S&F 35mm thick, 2nd class hard wood (Hollock), plain framed, panelled shutters, any number of panels, panels shall be of 12mm thick BWR glade veneered particle board medium density, wood particle board with commercial face veneers, size of members as specified in clause 8.20(a) of MES Schedule Part-I section-8 complete all as specified. |
| 62 | S&F 35 mm thick, 2nd class hard wood (Hollock), glazed and skeleton shutters open rebated and prepared to receive glass/ gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut and mitered beads for securing glass etcfor doors, size of members as specified in clause 8.24 (a) of MES Schedule Part-I Section-8, complete all as specified. |
| 63 | S&F Solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, supply and fixing in the frame at site as shown on page 176 of MES schedule Part-II (2020) complete all as specified. |
| 64 | S&F Solid PVC door frame of size 50 mm x 47 mm made of 5 mm plain colour PVC sheet reinforced with mild steel square tube complete all as specified in clause 8B.3.1 and shown on page 176 of MES Schedule Part-II (2020). |
| 65 | S&F Pressed steel frames made of 1.25mm thick MS sheet of profile 105x60mm for door and window frames with one rebate including lock strike plate, shock absorber, 20mm dia 60mm long MS conduit for housing of a drop bolt, treating of internal surfaces of chowkhats with coal tar or black paint including hinges, hold fasts/lugs etc and filling with PCC 1:3:6 type C-0 complete all as specified. |
| 66 | All as per item No 65 here-in-before but size 125x60mm with double rebate. |
| 67 | S&F 250mm long aluminium anodised , sliding door bolts, with haps stable (bolt type) and fixing clip of sheet cast or extruded sction and fixing bolts and sliding bolts not less than 16mm dia of shoot / bolt of extrudedsection or cast aluminium alloy complete all as specified as directed. |
| 68 | S&F 150mm long aluminium anodised barrel tower bolt extruded sectionand fixed complete all as specified as directed. |
| 69 | S&F 150mm size extrueded aluminium alloy handles, fabricated type , anodised complete all as specified as directed. |
| 70 | S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring including vulcanised rubber piece fixed in floor over all length of cover plate 150mm complete all as specified as directed. |
| 71 | S&F mild steel 300 mm size ordinary rat tail rod pattern spring for door including roller & roller plate complete all as specified as directed. |
| 72 | M&L for Preparation of new wooden or wood based surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified. |
| 73 | S&F mild steel box type window or ventilator with top or side hunge shutters, double leaf and double shutter (glazed and wire gauge shutters including 10mm square MS guard bars) with 100mmx45mm size box type frame fixed with hold fasts in PCC 1:2:4 complete including MS handles, tower bolts, peg stay, shutter spring lock to each shutter complete all as specified and as directed. |
| 74 | S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified as directed. |
| 75 | S&F sheet glass 4 mm thick ordinary quality n. exc 50 sqm and glazing with oil putty or wooden beads complete all as specified as directed. |
| 76 | Preparation of new steel surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over primed steel surfaces complete all as specified. |
| 77 | M&L for 500 litres capacity rotational moulded, triple layer polythene water storage tanks (cylindrical vertical with closed top) hoisting and fixed in positionon roofs including fittings, 20mm brass float valve, 20mm dia wash out pipe and over flow pipe projected 0.30mtr from edge of slab, complete all as specified. |
| 78 | S&F Wash hand basin, flat back 550x400mm vitreous china (white) including PTMT waste fittings, 32mm bore size, waste pipe, PVC, 32mm bore, PTMT bottle trap, angle iron/cast iron brackets of required size, PVC connection and soap dish complete all as specified. |
| 79 | S&F 600x450 mm beveled edge looking mirror of selected quality glass and backing with 6mm thick AC building board and fixed to wall with PVC rawl plugs with chromium plated brass screws and cup washers complete all as specified. |
| 80 | S&F white vitreous China wash down water closet pan (pedestal pattern) with PVC seat cover, and trap(including fixing bolts, 10 ltr PVC flushing cistern, PVC connection and flush pipe and connection to drain or outgoing pipe, paper holder, CP health faucet, flushing pipe, anti syphonage pipe, etc.complete all as specified. |
| 81 | S&F tubular towel rail 20mm dia type brass chrormium plated 600mm long between flanges complete all as specified and as directed |
| 82 | S&F chromium plated shower roses 125 mm size with or without swivel joints of standard size including fixing to 15mm steel pipe or union complete all as specified. |
| 83 | S&FPVC (SWR) floor trap plain with gratinghaving dia meter of out let 75mm including jointing with solvent cement to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified. |
| 84 | S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors/on walls/vent pipe 75mm bore complete all as specified. |
| 85 | S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors/on walls 110mm bore complete all as specified. |
| 86 | S&F PVC (SWR) heel rest bends any radius 110mm bore complete all as specified. |
| 87 | S&F PVC (SWR) bends any radius 75mm bore complete all as specified. |
| 88 | S&F PVC (SWR) junction single, (single T) equal or unequal 75 mm bore with oval excess door complete all as specified. |
| 89 | S&FPVC (SWR) junction single, (single T) equal or unequal 110mm borewith oval excess door complete all as specified. |
| 90 | S&F PVC (SWR) cowl 75mm bore complete all as specified. |
| 91 | S&FPVC (SWR) 150x150mm size gulley trapwith grating having dia meter of out let 110mm including jointing with solvent cement to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified. |
| 92 | S&F PVC (SWR) reducer 75 to 110mm bore complete all as specified. |
| 93 | M&L for Cement concrete (1:3:6) type C2 using 40mm graded crushed stone aggregate as in bed of PVC 110mm/NP-2 pipe 150mm bore including packing under and haunching against the sides of pipes after laying and testing complete all as specified. |
| 94 | M&L for 150mm bore (internal dia) NP-2 laid in trenches on concrete bed to required slope jointed and tested complete all as specified (Earth work & concrete bed measured separately). |
| 95 | M&L for Cutting into existing Manhole for removing existing Branch Drain Pipes, Making Good to Brick Wall and Rendering, cutting out Branch Channel and making good in Cement Concrete 1:2:4 (20mm Graded Stone Aggregate) and reforming Benching for 150mm internal dia Drain Pipe in Foul Condition, complete all as specified and as directed. |
| 96 | M&L for Pre-Cast Factory made RCC 1:1.1/2:3 (20mm Graded crushed stone aggregate) as in cover slab of manholes, septic tanks or similar articles with plain faces and set in Cement Mortar 1:4, including form work & renfoced with 8mm dia TMT steel 100mmc/c both way, complete all as specified and as directed. |
| 97 | M&L for neat cement finish to fresh concrete or plastered surfacescomplete all as specified. |
| 98 | M&L for Galvanised iron steel water tubing, 15mm bore, medium grade with all ISI markedfittings and fixed to walls and ceilings or laid in floors complete all as specified. |
| 99 | M&L for Galvanised iron steel water tubing, 20mm bore, medium grade with all ISI markedfittings and fixed to walls and ceilings or laid in floors complete all as specified. |
| 100 | S&F brass CP wall mixer for mixing hot and cold water screwed down for iron pipe and fixed for 15mm bore pipe completeall as specified and as directed by Engineer-in-Charge. |
| 101 | S&F Stop cock/Angular stop cock of CP brass, long thread 15mm bore complete all as specified and directed by Engineer-in-Charge. |
| 102 | S&F Bib tap of CP brass fency type, 15mm bore, with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified. |
| 103 | S&F brass CP centre hole basin mixer for mixing hot and cold water screwed down for iron pipe and fixed for 15mm bore pipe completeall as specified and as directed by Engineer-in-Charge. |
| 104 | S&F 20 mm bore gun metal globe or gate valve with iron wheel heads screwed both ends for iron pipecompleteall as specified and as directed by Engineer-in-Charge. |
| 105 | Taking down carefully old copper/alluminium point, wiring (light, fan, socket or power) complete, including fitting such as switches, ceiling roses, pendants, regulator socket tube light fitting of any type, Bulk head fittingetc segregation serviceable fitting/fixture and keep them safe custody for reuse and removing materials from the site and making good disturbed surface of walls&floors etc as per existing specification complete all as specified as directed. |
| 106 | Taking down old unserviceable sub main wiring any size/core/type of copper/alluminium conductor.including making good the disturbed surfaces and removing materials from the site of work complete all as specified as directed. |
| 107 | Taking down ofexisting old unserviceable distribution board including MCB/MCCBcomplete all as specified and as directed. |
| 108 | M & L for concealed point wiring complete with PVC insulated and unsheathed flame retardant ( FR ) cable of 1.5 sqmm (nominal area) with multistranded copper conductor single core 1100 volts grade in and including rigid PVC conduit not less than 20 mm dia,with MS terminal boxes for modular boxes (not less than 1.6mm thick) and painted with one coat of red oxide primer all around and two coats of black bituminous paint from out side and two coat of aluminum paint from in side including earth dollywithsutable Size of modular plate and modular frame for any nos of moduleof approved make and colour including 1.5 sqmm multistranded copper conductor cable of green colour as continuous earth wire with lugs and accesseries complete all as specified anddirected for the followings :- |
| 109 | (a) One light/fan point controlled by one switch |
| 110 | (b)One 3 pin socket outlet 5 amps on the same board with other switches. |
| 111 | (c) One 3 pin socket outlet, 5amps, independent board with other switches. |
| 112 | All as per item No 108 here in before but using 2.5 sqmm single core multi stranded copper conductor PVC insulated and unsheathed, flame retardant low smoke ( FRLS ) cable for 1 5 Amp socket outleton independent board including 2.5 sqmm multi stranded copper conductor cable of green colour as continuous earth wire with lugs etc as required complete all as specified andas directed. |
| 113 | M&L forsub main wiring with PVC insulated, fire retardant (FR), unsheathed two single core cable 1100 volts grade with stranded copper conductor of size 4 sqmm (Nominal area) drawn into existing / newconduit of any size and type/ casing-caping with and including one run of2.5 sqmm multistranded copper conductorsingle core PVC insulated, unsheathed cable of green coouras continuous earth wire including lugs etcconnected and tested complete all as specified and as directed.Note: (i)Conduit andaccessories shall be deemed to be excluded in the quotedrateand it is separately measuredby contractor. |
| 114 | All as per item No 110 here in before but 4x4.0 sq. mm + 2x2.5 sq. mm earth wire complete all as specified and as directed. |
| 115 | All as per item No 110 here in before but 2x2.50 sq. mm + 1x1.5 sq. mm earth wire complete all as specified and as directed. |
| 116 | M&L for Regid non-metallicPVCconduit25 mm(external dia) ISI marked (on surface) incl of all accessories and all fittings such as Tees,bends, elbows, reducers, bell mouth, tube ends and fixing accossories such as couplers,lock nuts, saddles, pipe hook etccomplete all as specified andas directed |
| 117 | All as per item No 113 here in before but 20mm dia complete all as specified and as directed. |
| 118 | S&F modularswitch 1 Way6 Amp , combined 2 module complete all as specified and as directed. |
| 119 | S&F Modular socket 6A - 2/3 pin combined 2 module complete all as specified and asdirected. |
| 120 | S&F Modular socket 2 in 1, , 3 pin, 6/16Ampcombined 2 module complete all as specified and asdirected. |
| 121 | S&F modularswitch 1 Way16Amp ,combined 2 modulecomplete all as specified and as directed. |
| 122 | S&F modular electronic Fan step regulator, 120W - 2 module complete all as specified and as directed. |
| 123 | S&Fmodular metal Box & modular white cover plate with frame 3 modulecomplete all as specified and asdirected. |
| 124 | S&Fmodular metal Box & modular white cover plate with frame 6 modulecomplete all as specified and asdirected. |
| 125 | S&Fmodular metal Box & modular white cover plate with frame 8 modulecomplete all as specified and asdirected. |
| 126 | Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed. |
| 127 | S&F sheet metal enclosure double door suitable for distribution boards when MCBs to be used having 200Amp rated bus bar 12ways singlepole and neutral 240 V complete all as specified and as directed. |
| 128 | Supply and fixing 415V 10KA \"B\" curve miniature circuit breaker (MCB) of 4 poles and current carrying capacity 32A in the DB complete all as specified and as directed. |
| 129 | Supply and fixing 240V, 10 KA \"B\" curve miniaturecircuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and as directed. |
| 130 | S & Fmodular AC box with mini MCBa two pin and earth plug and socket complete with one single pole MCB 20A and 240V complete all as specified and as directed. |
| 131 | S&F telephonemodular socket with box complete all as specified and as directed. |
| 132 | S&Ftube light fitting 1X20 w,LED Batten wall mountedwith alumunium housingand integrated electronic driver . Make havells cat part no LUMLINEPLUSBS20WLED865SPCSSor equivalentmake ofphillips,Surya,Bajaj. |
| 133 | S&F tube light fitting mirror type1X10 w, LED Batten wall mountedwith alumunium housingand integrated electronic driver . Make havells cat part no LUMLINEPLUSBS10WLED865SPCSSor equuivalentmake ofphillips,Surya,Bajaj. |
| 134 | S&F round shape 6 watt 220 volts AC recessed typr with high efficiency PMMA diffuser soft glare free light complete with driver, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified. |
| 135 | S&F sheet metal enclosures for DB-08 way, SPN, 200 Amps Bus bar 240 VoltsSingle door complete all as specified as directed. |
| 136 | S&F MCB SP 240 volt, 5 to 32 Amps, C series, 10 KA complete all as specified as directed. |
| 137 | S&F MCB SPN 240 volt, 40 Amps, C series, 10 KAcomplete all as specified as directed. |
| 138 | Supply & fix exhaust fans heavy duty 300 mm dia 1400 RPM, 50 Hz 230 volt for domestic use,dynamically balance blade , epoxy powder coated confirm to IS 2312-1967 with ISI marking IP-55 with class B insulation motor including suitable size louver and all fixing accessories such as fastners nut bolts and electric connection with 3 core cablecomplete all as specified and directed. Make -Havells/crompton/ bajaj. |
| 139 | Supply & fixfans ceiling complete with electronic type regulator and accessories 230 V,1200 mm sweep. BEE 5 star rated complete all as specified and directed. Make- Havells/halonix/usha/Orient |
| 140 | Supply & fixing electric water heater, storage type steel body with copper inner tank and heating element of 2000 watt capacity, 25 litre, BEE 5 star rated complete with all accessories such as safety valve, thermostate, NRV, connection pipes etc complete all as specified and directed. |
| 141 | Supply & fixing electric operated desert cooler with ISI marked fan and made of mild steel 1.16mm thick, electric driven single phase copper wound fan motor and water pump motor having normal air flow capacity of 5000 cum per hour in steel body including PVC connection, float valve 15mm PTMT, and electric connection with copper 3 core wire of size 1.50 sqmm appx length of 3.0 mtrcomplete all as specified and directed. |
| 142 | M&L for earthing complete withGI plate electrodes 600x600x6.3mm thick buried directly in ground earth pit not less than 2.25m deep below normal ground level with top edge of earth plate not less than 1.5m below ground level connected to G Iwire 4 mm as earthing lead fixed by means of nut bolt washer of brass as shown in electrical plate No.3 of SSR Pt-I 2009 including necessary excavation and earth work in any strata, GI pipe 20mm dia light grade for watering , and 15 mm light grade as protrection to earth wire upto 7.5 mtr ,charcoal & salt etc and PCC chamber in PCC 1:3:6 type C1 covered with 40mm thick RCC 1:2:4 type B1 using 20mm graded stone aggregate reinforced with 8mm dia MS bar @ 75mm C/C both ways cover, funnel & wire mesh including making of test point all as specified testing on complete. |
| 143 | S&F XLPE insulated, armoured heavy duty electric cables with aluminium conductor, 11000 volts grade, cross sectional area 16 sqmm 2 Core complete all as specified and directed by Engineer-in-Charge. |
| 144 | M&L for sand cushioning in trenches for protection of LT under ground cable including punning and consolidation complete as sepecifiedand directed by Engr-in-Charge. |
| 145 | Supply and laying well burnt sub class ‘B’ bricks, locally available in trenches for protection of underground cable complete as sepecifiedand directed by Engr-in-Charge. |
| 146 | M&L GI pipe 50 mm dia light grade pipe, as cable protection pipe including fixing clamps with nut & bolts and painting complete all as specified and directed by Engineer-in-Charge. |
| 147 | M&L for complete for drilling hole underhard standing /road in different location as per site requirement (between 03 mtr to 12mtr maximum) for laying ofpipe for protection of cable etc by means of bookle and without disturbing the top surfaceand making good the disturbed surface if any complete all as specified and directed by Engineer-in-Charge. |
| 148 | Supply, installation and testing of Tripod maintenance free Chemical earthing (3 set earthing inter connected to 1 set with copper earth plate size 90cm x 60 cm x 5mm each connected with common copper earth strip 50mm x 6mm brazed to all three down copper strip and connected to test point complete duly filled with highly conductive and anti corrosive compound fill upto height 1700mm anti corrosive component consist of require quantity having chemical composition Bentonite 40%, copper sulphate 10%, Gypsom 5%, Graphite 10%, Alum 5%, Zinc shalphate 10%, Aluminium sulphate 10% duly surrounded by soil friendly backfill compound non soluble in water including connection with copper earth strip 50mm x 6mm, making PCC pit of size 30cm x 30cm x 30cm inner size in mix 1:2:4 type B-1, 40mm thick cover reinforced with 6mm dia MS bar 4 Nos in both way with lifting hook made of 8mm dia bar and testing on completion to achieve value not more than 0.50 ohm complete all as specified as directed. \"Note :- Copper strip of size 50x 6mm upto 7.5 mtr distance incusive in quoted rates\". |
| 149 | S&F Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or burried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc as required 50mm x 6mm size copper strip complete all as specified and as directed. |
