Tender For Special Repair To Parwanoo Kasauli Dharampur Subathu Solan (Mdr-06) Road In Km. 0/00 To 57/320. (Sh:-Providing And Laying Renewal Coat By Providing 30Mm Thick Bituminous Concrete, Thermoplastic Edge Line In Km. 0/00 To 4/00). Under Nhai Deposit, Kasauli-Himachal Pradesh
TDR : 37295907
Tender Notice
BOQ
Expired
Kasauli
Himachal Pradesh
Tender For Special Repair To Parwanoo Kasauli Dharampur Subathu Solan (Mdr-06) Road In Km. 0/00 To 57/320. (Sh:-Providing And Laying Renewal Coat By Providing 30Mm Thick Bituminous Concrete, Thermoplastic Edge Line In Km. 0/00 To 4/00). Under Nhai Deposit
Name of Work: Special repair to Parwanoo Kasauli Dharampur Subathu Solan (MDR-06) road in Km. 0/00 to 57/320. (SH:-Providing and laying renewal coat by providing 30mm thick Bituminous Concrete, thermoplastic edge line in Km. 0/00 to 4/00). Under NHAI Deposit
Sl. No.
Item Description
1
Providing and laying bituminous macadam (BM) 50 (fifty) milimeter with hot mix plant using crushed aggregates ofgrading as per Table 500.4 ( five zero zero point four) premixed with bituminous binder, transported to site upto all leadlaid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolledto achieve the desired compaction as per Technical Specification Clause 504. (five hundred four) including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all incidental charges.
2
Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.275 kg (zero point two seven fivekilogramme)per sqm on the prepared dry and hungry bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503 (five zero three) and as per direction of Engineer in charge including carriage of all labour, equipments and materials to various locations through all modes of transportation in all lead & lifts and all incidental charges.
3
Providing and laying 30mm thick Bituminous Concrete with 100-120 (One Hundred to One hundred Twenty) TPH batch type hot mix plant producing an average output of 75 (Seventy Five) tonnes per Hour using crushed aggregates of specified aggregates of specified grading, premixed with bituminous binder (VG-10) @ 5.5 (Five point five) per cent of mix and filler, transporting the hot mix to work site, layingwith hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, viberatory and tendem rollers to achieve the desired compaction as per MORT&H specification clause No. 509 complete in all respects and as per direction of Engineer in charge including carriage of all labour, equipments and materials to various locations through all modes of transportation in all lead & lifts and all incidental charges.
4
Providing and laying of hot applied thermoplastic compound 2.5 mm (two point five milimeters) thick and 0.10 (point one zero) meter wide strip in Center line / Edge line including reflectorising glass beads @ 250 gms ( two fifty grammes) per square meter area, thickness of 2.5 mm (two point five milimeters) is exclusive of surface applied glass beads as per IRC:35 (thirty five) in accordance with Ministory of Road Transport Specification (Latest revision) and IRC Code. The finished surface to be level, uniform and free from streaks and holesincluding carriageofall labour, equipments and materials to various locationthrough all modes oftransportation in all leadslifts and all incidental charges
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
