Council Of Scientific And Industrial Research-CSIR has published Tender For Minor Civil Works Including Aluminium Partition, False Ceiling, Providing Frp Grating Duct Covers And Frve Ducting To The Fume At Ccfp, Nwtc, Belur, Bengaluru. Submission Date for this Tender is 26-04-2023. Duct Supply Tenders in belur Karnataka. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | WOOD AND P. V. C. WORK |
| 2 | Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. |
| 3 | STEEL WORK |
| 4 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 5 | FINISHING |
| 6 | 12 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) |
| 7 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :Water thinnable cement primer |
| 8 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two or more coats on new work |
| 9 | Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.Two coats |
| 10 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete |
| 11 | DISMANTLING AND DEMOLISHING |
| 12 | Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead. |
| 13 | ALUMINIUM WORK |
| 14 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fastenersto be paid for separately) :For fixed portion:Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) |
| 15 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fastenersto be paid for separately) :For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately):Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) |
| 16 | Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer- in-charge:Pre-laminated particle board with decorative lamination on both sides |
| 17 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) |
| 18 | Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. |
| 19 | Providing and fixing aluminium round shape handle of outer dia 100 mm with SS screws etc. complete as per direction of Engineer-in- charge:Polyester powder coated minimum thickness 50 micron aluminium |
| 20 | MARKET RATES |
| 21 | Providing and fixing FRP Moulded Grating as per the following specification :Rib thickness (5-7mm) color Grey/Yellow Resin UV Resistance,Mesh size 38x38mm Grating Thickness 38mm, Top Surface non glited,open area 65% Load carrying capacity :UDL 500Kg/Sqm at support span of 1000mm required Approx Span: 500-1000mm(maximum : Panel size of 400mm (width )x1000mm (Length) all Completed as per the Direction of Engineer In Charge. |
| 22 | Providing and Fixing FRVE Ducting ( upto lenghth 15 mt) upto dia 200mm of factory made PP with 3mm FRVE lining to Connect with the existing blower (Including Flanges,Bends,Gasket,GI Hardware & MS Support) with PPFRP butterfly manula damper (2 Nos) made of PP+FRP with PP shaft and PP spot extractor(2 Nos)( 3 joints ceiling mounted- Approx. length 2000mm)with PVC imported flexible for spot extractror connection with suitable clamps. all Complete as per the direction of Engineer In Charge ( as per Fig.) |
| 23 | Providing sliding track along with heavy duty sliding roller 4wheels(2No"s),Pivots for sliding door.upto a length of 2.0 metre. |
| 24 | Removing & Re-fixing aluminium/ Gypsum partitions, doors, windows, fixed glazingincluding cutting of the bottom aluminium partitions and Doors as directed by Engineer-in-charge. |
| 25 | Providing and fixing tiled false Ceiling of Acoustical suspended ceiling system with fine fissured tiles having board edges of M/s Armastrong or equivalent with following specifications(a) The tiles shall have humidity resistance of 99% RH,NRC 0.55, light Reflectance>80%, Thermal conductivity k=0.052-0.057 w/moc, color white, fire performance class O/class 1(Bs-476) with life time warranteeagainst sag in module size of 600mmx600mmx16mm laid on 24xll-Hot Dipped galvanised steel suspension system having rotary stitching on the main runner, 1200mm and 600mm cross tees.in true horizontal level suspended on inter locking metal grid of hot dipped galvanised steel sections ( galvanized @ 170 gsm/sqm.) consisting of main "T" runner with suitably spaced at joints to get required length and of size 24x38mm made from 0.30mm thick (minimum) sheet spaced at 1200mm center to center and cross "T" of size 24x25mm made of 0.30mm thick (minimum) sheet, 1200mm long spaced between main "T" at 600mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600mm and size 24x25mm made of0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600mm panel to form grids of 600x600mm and wall angle of 21x21x0.3mm and laying false ceiling tiles of approved texture in the grid including, wherever, required, cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats fixed to ceiling with6 mm dia and 50mm long dash fasteners, 4mm GI adjustable rods with galvanised level clips spaced at 1200 mm center to center along main T, bottom exposed width of 24mm of all T-sections shall be pre-painted with polyester paint, all complete at all heights as per specifications drawings and as directed by Engineer-in-Charge. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
