municipality has published Tender For Commissioning Of Bore Well At New Park Back Side Of Jail In Ward No.4. Submission Date for this Tender is 02-05-2023. Bore Well Tenders in barbil Odisha. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Labour for drilling a perfectly bore hole to specified diameter for a specified depth below G.Lin alluvial soil strata by mud rotary Rig drilling as required to suit the site condition as per the direction of Engineer in charge including use of own rigs with its accesories , tools and plant and consumables etc for lowering of finished bore suitable for loweringof 200mm dia GI/PVCpipes for housing ,fitted with socket and with or withoutwell screen as per the necessityfor soft medium hard and boulder formation ( GI/PVC casing pipe if required by the contrctorto prevent collapse of over burden portion )including lowering and with drawing of casing pipe after drilling 200mm to 450mm dia in over burden portion.A- Drilling 200mm to 450mm dia Bore-From 00mtr to 100th Mtr |
2 | Supplying all labour and T&P for logging the bore through departmental logging team (till logging team arrives at the site the contractor is to keep the bore intact by circulating mud through mud circulating system ) and when logging team arrives at site the contractor will withdraw the boring pipes and cutter etc and keep the bore suitable for logging operation and supply of required labour to carry out logging operation as per direction of Engineer in charge.Logging operation |
3 | Labour for lowering the following the following size of PVC casing pipe with or without slotted pipes as per the necessity from ground level up to 300mtr depth and fitted and fixedup in perfectly vertical position including cutting and threading of blank pipes and slotted pipes and supplying and fixing of all jointing materials extra sockets and T&P etc complete and keeping the top casing pipe threaded including sludgging the tube wellto prevent entry of foreign materials.a)Lowering of 200mm dia PVC pipe- From 0 mtr to 200th Mtr |
4 | Cleaning and developing the productionwell with their own air compressor continuously worked till clear & adequate discharge is obtained from the tube well including supply and use of necessary equpments and labour as per the direction of the Engineer in charge.For 200mm dia Production Tube well - |
5 | Supplying all labour , T & Pand materials for packing the bore with washed gravel ( size p-6) around the pipes in good quality including cost of gravel etc all complete as per direction of Engineer in charge.( All through the bore around the pipe and Strainer).For 200mm dia Production Tube well - II/4x ( 0.45m2 -0.20m2) x 117.00m |
6 | Supplying all materials labour T & P and grouting with cement slurry for Sanitary Sealing around the GI/PVC casing pipe up to 3.00mtrs below ground level including cost of cement all complete as per the direction of Engineer in charge.a-For 200mm dia Production Tube well - |
7 | COST OF MATERIALS-200mm dia Sch-80 PVC casing pipe - |
8 | 200mm dia PVC bell Plug. |
9 | 200mm dia PVC Well Cover. |
10 | 200mm dia PVC short Piece (1.00mtr) |
11 | KSB make Submersible Pump set -2.0 HP single Phase , to give Discharge Range 2800 lit/hr - 1100 lit/hr at Head Range: 55 mtr - 136mtr, Model : CORA 2C/25 XUMA LX (S) 100 |
12 | Bhartia Culter Hammer (BCH) make DOL Control Panel 2.0 HP, Single phase, having contactor, over load relay, ammeter Indicating lamp & Auto on starting arrangement with powder coated box with locking arrangement suitable for above pumpset |
13 | Magnum make 40 mm OD, PN6/PE80 HDPE pipe |
14 | KSB/BCH make 2.5 sq.mm, 3 Core submersible flat cable |
15 | 6mm thickness PVC coated SS rope |
16 | 1 1/4" S.S. Nipple with nut bolt |
17 | 8" Borewell cover & 1 1/4" Clamp |
18 | U Clamp for PVC coated SS rope |
19 | 1 1/4" G.I. Bende with socket |
20 | Erection, Testing, Commissioning of the above pumpset and To & Fro of Mechanic Charge |
21 | supplying , laying, fixing with clamps to walls, ceiling & floor U-PVC pipes and bendsconfirming 15mm nominal dia Schedule 80 including testing and plugging at open end, as per direction of engineer.(Make - Oriplast/ Hariplast) |
22 | supplying , laying, fixing with clamps to walls, ceiling & floor U-PVC pipes and bendsconfirming 25mm nominal dia Schedule 40 including testing and plugging at open end, as per direction of engineer.(Make - Oriplast/ Hariplast) |
23 | supplying , laying, fixing with clamps to walls, ceiling & floor U-PVC pipes and bendsconfirming 40mm nominal dia Schedule 40 including testing and plugging at open end, as per direction of engineer.(Make - Oriplast/ Hariplast) |
24 | Supplying and fixing 15mm dia brass screw down CI Bib cock including cost of all materials, labour etc. |
25 | Supplying and fixing 25mm dia PVC full way gate valve, including cost of all materials, labour etc. |
26 | Supply, fitting fixing of display board grouted in cement concrete at site. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail