Indian Institute Of Science -IISc has published Tender For Supply And Installation Of Office Furniture At Idr Building In Iisc Bangalore. Submission Date for this Tender is 16-05-2023. Office Furniture Tenders in bangalore Karnataka. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 19-Apr-2023 | ELIGIBILITY CRITERIA | Technical Bid | 09-05-2023 |
| 2 | 28-Apr-2023 | Corrigendum - 2 | Other | 09-05-2023 |
| 3 | 08-May-2023 | Date Corrigendum | Date | 16-05-2023 |
| 4 | 08-May-2023 | Corrigendum - 3 | Technical Bid | 16-05-2023 |
| Sl. No. | Item Description |
| 1 | Pouf Seating Providing450mm diameter and 400mm high PoufSeating made out of metal frame structure ,wooden finish with high density foamof Chenile /leatheretteupholsterywith matching thread , Overlooking removable for washing or correction of approved color and Make as approved by the Engineer-in -charge.Avoid sharp edges nailor screw pointing out of the surface. Refer Tender document for reference image. |
| 2 | High chair Providing 400 mm dia high stool chair ergonomicaly designed made out ofrounded metal structure withpowdercoated finish, backrest welded with approved colour finish and seating made out of high density foamwith approved colour chenilleupholstery and rubber bushes. Avoiding sharp edges nail or screw pointing out of the surface. Refer Tender document for reference image. Size : 400mm dia with 750mm height. |
| 3 | Executive Chair: Providing Ergonomically assessed rotating chair with adjustable head support attached to ergonomically formed, flexible plastic backrest frame supportingregulative mesh material made of 100% Polyester with tilting mechanism. The Lumbar support cushion to provide additional support at the back,T armrest with armrest pads made of soft polyurethane with adjustable height.Ergonomically moulded polyster upholstery covering breathable polyurethane (PU) moulded foam of thickness: 5cm of seatingsupported by metal legs with SS finish attached with five armedtwin castors and height adjustable lever as indicated in image , Color and Make as per the approval of Engineer-in -charge. Refer Tender document for reference image. |
| 4 | Visitor"s Chair: Providing Ergonomically assessed rotating chair withergonomically formed, flexible plastic backrest frame supportingregulative mesh material made of 100% Polyester with tilting mechanism. The Lumbar support cushion to provide additional support at the back, PlasticT armrestwith adjustable height, ergonomically moulded polyster upholstery covering breathable polyurethane (PU) moulded foam of thickness: 5cm seating supported by metal legs with ss finish attached with five armedtwin castors and height adjustable lever as indicated in image , Color and Make as per the approval of Engineer-in -charge. Refer Tender document for reference image. |
| 5 | Classroom Chair: Providingfactorymade classroom chairs with powder coated pipe MS metal frame ,seat and backrest with cusion made up of high density foam with one arm attached with 12 mm thk. foldable writing pad made up ofprepolished wood attached to powder coatedmetal arm, chair supported by four powdwer coated metal legs with rubber bushes.Colour and Make as approved by the Engineer-in -charge. Refer Tender document for reference image. OR Classroom Desk and Chair system: Chair: Providingfactorymade classroom chairs with powder coated pipe MS metal frame with attached arms, seat and backrest made up of high density foam supported by four powdercoated metal legs with rubber bushes. Desk: Providing and fixing 25mm thk. machine pressed prelaminated particle board table topwith 2mm thk PVC edge lipping with powder coated metallegs secured with rubber bushes. Front portion of table secured with metal modesty panel.Each unit shall comprise of a table and chair. Refer Tender document for reference image. |
| 6 | Seminar hall chair Providing and fixing heavy duty fully upholsteredseminar hall chairs 520mm centre to centre supported with powder coated metal frames, individualy moulded seat with back cusionsmade up of polyurethane foam covered with approved upholstery . Foldable writing pad made up of 25mm thk machine pressed prelaminated particle board secured with 2mm thick PVC lipping attached to powder coatedmetal armrest with metal fastner.The chair rest on the ground on two side panel frames made out of upholstered 6mm partical board , the side panel board is grouted to the floor byanchor bolt system. (The item specifies 11no of chairs in one row and the quantity mentioned is number of rows.) Refer Tender document for reference image. |
| 7 | Sofa Providing 1400mm X 600mm two seater sofa with medium back rest and arm rest made out ofwooden/metal frame structure with high density foam padding Chenile/ leatherette upholstery supported by crome plated metal legs with rubber bushes of approved color and Make. Size :1400x600 mm Refer Tender document for reference image. |
| 8 | Canteen Chair: Providing factorymade medium back chairswith aback inner / outer shell made out up of recyclable polypropylene along withhandrest attached with the SS legs with snap type of fittings, end of the legs secured with rubber protector,colour and Make as approved by the Engineer-in -charge. Colour shall not fade at least for 10 years, it shall not get brittle as year passes. Refer Tender document for reference image. |
| 9 | Coffee table: Providing and fixing factorymade 800mm dia coffee table made out of 25mm machine pressed prelaminated particle board table topwith moisture proof carcass secured with 2mm thick PVC lippingsupported bySS legs rounded at edges rubber bushes of approved color and make. avoiding sharp edges nail or screw pointing out of the surface. Table size:800 dia with 450mm height |
| 10 | Centre Table: Providing and fixingfactorymade 1100mm dia machine pressed prelaminated particle board table top with moisture proof carcass with 2mm thick PVC edge lipping supported by powder coated metal legs , rubber bushes and equired accessories. Color Make as approved by Engineer-in -charge. Refer Tender document for reference image. Size of table: Dia 1100mm , Height 750mm |
| 11 | Colaboration area Table type 1 : Providing and fixing factorymade linear table of600mm wideand 25mm thickpre laminated machine pressed particle boardwith 2mm thick PVC edge lipping supported bypowdercoated metal legs with side modesty panel and intermediate supports of approved color and Make. Size :5400 mmm X 600mm |
| 12 | Colaboration area Table type 2: Providing and fixing factorymade linear table of600mm wideand 25mm thickpre laminated machine pressed particle boardwith 2mm thick PVC edge lipping supported bypowdercoated metal legs with side modesty panel and intermediate supports of approved color and Make. Size: 6400mm X 600mm |
| 13 | Colaboration area Table type 3 : Providing and fixing factorymade linear table of600mm wideand 25mm thickpre laminated machine pressed particle boardwith 2mm thick PVC edge bindingsupported bypowdercoated metal legs with side modesty panel and intermediate supports of approved color and Make. Size:12500mm X 575mm |
| 14 | Colaboration area Table type 4 : Providing and fixing factorymade linear table of600mm wideand 25mm thickpre laminated machine pressed particle boardwith 2mm thick PVC edge bindingsupported bypowdercoated metal legs with side modesty panel and intermediate supports of approved color and Make. Size:12125mm X600 mm |
| 15 | Meeting Hall Table: Type-1 Providing and fixingaesthetically appealing factory made modular tableof25mm thk. machine pressedPre laminated commercial plywood top with provision to fix 10 Module Power & data Socket Pop up boxes -10 nos at regular intervals on table top , with 2mm thick edge binding supported by powder coated metal legs with modesty panel at the center to accommodate cable and wiring system, provision for the vertical and horizontal wire management with all metal surfaces being finished with powder coating of approved colour.Colour, designand Make shall be as approved by the Engineer-in -charge. Size(2100 mm x8000 mm)-Conference room-40 Pax |
| 16 | Meeting Hall Table: Type-2 Providing and fixingaesthetically appealing factory made modular tableof25mm thk. machine pressedPre laminated commercial plywood top with provision to fix 4 Module Power&data Socket Pop up boxes -4 nos at regular intervals on table top s, with 2mm thick edge binding supported by powder coated metal legs with modesty panel at the center to accommodate cable and wiring system, provision for the vertical and horizontal wire management with all metal surfaces being finished with powder coating of approved colour.Colour, designand Make shall be as approved by the Engineer-in -charge. Meeting room table(1200x5250 mm)-Meeting Room -20 Pax |
| 17 | Meeting Hall Table:Type-3 Providing and fixingaesthetically appealing factory made modular tableof25mm thk. machine pressedPre laminated commercial plywood top with provision to fix 3Module Power&data Socket Pop up boxes -3nos at regular intervals on table top ,with 2mm thick edge binding supported by powder coated metal legs with modesty panel at the center to accommodate cable and wiring system, provision for the vertical and horizontal wire management with all metal surfaces being finished with powder coating of approved colour.Colour, designand Make shall be as approved by the Engineer-in -charge. Meeting room table(2000x3000 mm)-Meeting Room -20 Pax |
| 18 | Meeting Hall Table: Type-4 Providing and fixingaesthetically appealing factory made modular tableof25mm thk. machine pressedPre laminated commercial plywood top with provision to fix 4Module Power&data Socket Pop up boxes -4 nos at regular intervals on table top , with 2mm thick edge binding supported by powder coated metal legs with modesty panel at the center to accommodate cable and wiring system, provision for the vertical and horizontal wire management with all metal surfaces being finished with powder coating of approved colour.Colour, designand Make shall be as approved by the Engineer-in -charge. Meeting room table(1000x6000 mm)-Meeting Room -20 Pax |
| 19 | Meeting Hall Table: Type-5 Providing and fixingaesthetically appealing factory made modular tableof25mm thk. machine pressedPre laminated commercial plywood top with provision to fix 3Module Power&data Socket Pop up boxes -3 nos at regular intervals on table top , with 2mm thick edge binding supported by powder coated metal legs with modesty panel at the center to accommodate cable and wiring system, provision for the vertical and horizontal wire management with all metal surfaces being finished with powder coating of approved colour.Colour, designand Make shall be as approved by the Engineer-in -charge. Meeting room table(1000x3750 mm)-Meeting Room -10 Pax |
| 20 | Canteen Table: Providing 1000mm dia factory make 25mm thk. prelaminated machine pressed heat & moisture resistance tableside full rounded top with 2mm thk PVC edge lipping with SSlegs and required accessories complementing the canteen chair ,colour and Make as approved by the Engineer-in -charge. Refer Tender document for reference image. Size: 1000mm dia X 750mm height |
| 21 | Teacher"s Desk: Providing factory made desk with25mm thk. machine pressed prelaminated particle board table topwith 2mm thick pvc edge lipping with powder coated metal legs secured withrubber bushes and modestry panel onall the sides. Storage unit with lockable two drawers supported by requiredaccessories. Size: 2000mmX 600mm Refer Tender document for reference image. Reference Drawing No :TCE.11858A-AC-1014-IW-10228 |
| 22 | Reception Table Providing and fixingaesthetically appealing factorymadereception table made up of25mm thick machine pressed prelaminated commercial plywoodwith two level desk one at 1050mm level and 750 level respectively with provision of two seperatevertical and horizontal cable manager , cable cubby and provision of opening forswitch board at table top secured with2mm thick PVC edge binding. Side storage units Storage unitof 15mm thick machine pressed partition board with shutter, soft close consealed hinges and drawers with locking system, SS handles, drawer channels. Table shall be supported by prelaminated frames with modesty panel of the same material along the sides. Colour, design and Make as approved by the Engineer-in -charge. Size: 3100mmX 1800mm x1050/750mm (height) Refer Tender document for reference image. Reference Drawing No :TCE.11858A-AC-1014-IW-10229 |
| 23 | Teapoy Providing centre table with table top of 8 mm thk.toughnedglass with champhered edge( bevelled edge) fitted to the frames with necessary arrangement. The base shall be made up ofprelaminatedcommercial plywood frame connected with 4 Nos ofvertical members tied to each other with horizontal members at bottom secured with rubber bushes and horizontal surface at the bottom to keep the newspaper. Color and Make as approved by the Engineer-in -charge. Size:900mm X450mm Refer Tender document for reference image. |
| 24 | L Shaped Desk: Providing and fixing factory madeL shape modular desking system of size 2100 X 1750 X 600mm &750 (ht)mm - 25mm thk. Pre laminatedmachine pressed Commercial plywood table top with 2mm thick PVCedge lipping with powder coated metal legs supported by MS cross beam.Metal modesty panels along the aisles and open ends, vertical wire management, flip cover with back box with provision of fixing power and data sockets on table top with all metal surfaces being finished with powder coating of approved colour. Storage unit of 15mm thick machine pressed prelaminated commercial plywood with 2mm thick PVC edge lipping ,with2 drawers along with locking system anddrawer channels, recessed handles and supporting accessories (top one small and bottom one big )all the accessories and locking system with rubber protectors as shown in drawing. Bidder to note that table support shall not be rested on storage and shall be independent. Color and Make as per the approval of Engineer-in -charge. Reference Drawing Number TCE.11858A-AC-1014-IW-10210 |
| 25 | Modular Desk Type 1 A: Providing and fixingmodular Linear desking system of each unit of size2000X1600X600 &750 (ht)mm Table Top - 25 mm thick machine pressed Pre Laminatedparticle board with 2mm thick PVC edge lipping on all exposed sides, Support - powder coated leg with Supporting MS cross Beam. It shall have vertical and horizontal wire management system with openings for sockets to access the power and data sockets connection for easy access. There shall be separator for data and voice cabling and raceway and 50mm grommet matching the table top colour. Table front and side separator partition shall be made up of400 mm high made up of 12mm thick corkmounted over 12mm thick comm.plyon either sides & finshed with fabric of approved colour. If Softboard is mounted only on one side then the other side shall be finished with prelaminated particle board. Table which is close to aisle and not having low height storage will have end modesty panel. Table which are partitionfacing willhave modesty panel. All Non sharing workstation will have front modesty panel with all metal surfaces being finished with powder coating of approved colour. Bidder to note that table support shall not be rested on storage and shall be independent. Storage unit of 15mm thick machine pressed partition board with 2 drawers along with locking system anddrawer channels, recessed handles and supporting accessories (top one small and bottom one big )with rubber protectors. Colour and Make as approved by the Engineer-in -charge. Size of cluster : 3925mm X3200mm Reference Drawing Number :TCE.11858A-AC-1014-IW-10211 |
| 26 | Modular Desk Type 2: Providing and fixingmodular Linear desking system with each unit ofsize2000X1600X600 &750 (ht)mm Table Top - 25 mm thick machine pressed Pre Laminatedparticle board with 2mm thick PVC edge lipping on all exposed sides, Support - powder coated leg with Supporting MS cross Beam. It shall have vertical and horizontal wire management system with openings for sockets to access the power and data sockets connection for easy access. There shall be separator for data and voice cabling and raceway and 50mm grommet matching the table top colour. Table front and side separator partition shall below height privacy screen of8mm thick sandwiched toughened glass of height 400 mm on main spine with 3 nos brackets, metal modesty panels along the aisles and open ends with all metal surfaces being finished with powder coating of approved colour. Storage unit with 15mm thk.machine pressed pre laminated particle board with 2 drawers along with locking system anddrawer channels, recessed handles and supporting accessories (top one small and bottom one big )with rubber protectors as shown in drawing. Bidder to note that table support shall not be rested on storage and shall be independent. Colour and Make as approved by the Engineer-in -charge. Size of cluster : 3925mm X1600mm Reference drawing number :TCE.11858A-AC-1014-IW-10212 |
| 27 | Modular Desk Type 2 A: Providing and fixingmodular Linear desking system with each unit of size2000X1600X600 &750 (ht)mm Table Top - 25 mm thick machine pressed Pre Laminatedparticle board with 2mm thick PVC edge lipping on all exposed sides, Support - powder coated leg with Supporting MS cross Beam. It shall have vertical and horizontal wire management system with openings for sockets to access the power and data sockets connection for easy access. There shall be separator for data and voice cabling and racewayand 50mm grommet matching the table top colour. Table front and side separator partition shall be made up of400 mm high made up of 12mm thick corkmounted over 12mm thick comm.plyon either sides & finshed with fabric of approved colour. If Softboard is mounted only on one side then the other side shall be finished with prelaminated particle board. Table which is close to aisle and not having low height storage will have end modesty panel. Table which are partitionfacing willhave modesty panel. All Non sharing workstation will have front modesty panel with all metal surfaces being finished with powder coating of approved colour. Bidder to note that table support shall not be rested on storage and shall be independent. Storage unit of 15mm thick machine pressed partition board with 2 drawers along with locking system anddrawer channels, recessed handles and supporting accessories (top one small and bottom one big )with rubber protectors. Colour and Make as approved by the Engineer-in -charge. Size of cluster : 3925mm X1600mm Reference Drawing Number :TCE.11858A-AC-1014-IW-10213 |
| 28 | Modular Desk Type 3: Providing and fixingmodular Linear desking system of each unit ofsize2000X1600X600 &750 (ht)mm Table Top - 25 mm thick machine pressed Pre Laminatedparticle board with 2mm thick PVC edge lipping on all exposed sides, Support - powder coated leg with Supporting MS cross Beam. It shall have vertical and horizontal wire management system with openings for sockets to access the power and data sockets connection for easy access. There shall be separator for data and voice cabling and raceway and 50mm grommet matching the table top colour. Table front and side separator partition shall below height privacy screen of8mm thick sandwiched toughened glass of height 400 mm on main spine with 3 nos brackets, metal modesty panels along the aisles and open ends with all metal surfaces being finished with powder coating of approved colour. Storage unit with 15mm thk.machine pressed pre laminated particle board with 2 drawers along with locking system anddrawer channels, recessed handles and supporting accessories (top one small and bottom one big )with rubber protectors as shown in drawing. Bidder to note that table support shall not be rested on storage and shall be independent. Colour and Make as approved by the Engineer-in -charge. Size of cluster : 2000mm X1600mm Reference Drawing Number : TCE.11858A-AC-1014-IW-10214 |
| 29 | Modular Desk Type 3 A: Providing and fixingmodular Linear desking system with each unit of size2000X1600X600 &750 (ht)mm Table Top - 25 mm thick machine pressed Pre Laminatedparticle board with 2mm thick PVC edge lipping on all exposed sides, Support - powder coated leg with Supporting MS cross Beam. It shall have vertical and horizontal wire management system with openings for sockets to access the power and data connection for easy access. There shall be separator for data and voice cabling and raceway and 50mm grommet matching the table top colour. Table front and side separator partition shall be made up of400 mm high made up of 12mm thick cork mounted over 12mm thick comm.plyon either sides & finished with fabric of approved colour. If Softboard is mounted only on one side then the other side shall be finished with prelaminated particle board. Table which is close to aisle and not having low height storage will have end modesty panel. Table which are partitionfacing willhave modesty panel. All Non sharing workstation will have front modesty panel with all metal surfaces being finished with powder coating of approved colour. Bidder to note that table support shall not be rested on storage and shall be independent. Storage unit of 15mm thick machine pressed partition board with 2 drawers along with locking system anddrawer channels, recessed handles and supporting accessories (top one small and bottom one big )with rubber protectors. Colour and Make as approved by the Engineer-in -charge. Size of cluster : 2000mm X1600mm Reference Drawing Number :TCE.11858A-AC-1014-IW-10215 |
| 30 | Modular Desk Type 4A: Providing and fixingmodular Linear desking systemof mentioned size (1835x675+1325x675)&750 mm high Table Top - 25 mm thick machine pressed Pre Laminatedparticle board with 2mm thick PVC edge lipping on all exposed sides, Support - powder coated leg with Supporting MS cross Beam. It shall have vertical and horizontal wire management system with openings for sockets to access the power and data sockets connection for easy access. There shall be separator for data and voice cabling and raceway and 50mm grommet matching the table top colour. Table front and side separator partition shall be made up of400 mm high made up of 12mm thick corkmounted over 12mm thick comm.plyon either sides & finshed with fabric of approved colour .If Softboard is mounted only on one side then the other side shall be finished with prelaminated particle board. Table which is close to aisle and not having low height storage will have end modesty panel. Table which are partitionfacing willhave modesty panel. All Non sharing workstation will have front modesty panel with all metal surfaces being finished with powder coating of approved colour. Bidder to note that table support shall not be rested on storage and shall be independent. Storage unit of 15mm thick machine pressed partition board with 2 drawers along with locking system anddrawer channels, recessed handles and supporting accessories (top one small and bottom one big )with rubber protectors. Colour and Make as approved by the Engineer-in -charge. Size of cluster : (1835x675+1325x675)&750 mm Reference Drawing Number :TCE.11858A-AC-1014-IW-10216 |
| 31 | Modular Desk Type 5: Providing and fixingmodular Linear desking system with each unit of size2000X1600X600 &750 (ht) Table Top - 25 mm thick machine pressed Pre Laminatedparticle board with 2mm thick PVC edge lipping on all exposed sides, Support - powder coated leg with Supporting MS cross Beam. It shall have vertical and horizontal wire management system with openings for sockets to access the power and data sockets connection for easy access. There shall be separator for data and voice cabling and raceway and 50mm grommet matching the table top colour. Table front and side separator partition shall below height privacy screen of8mm thick sandwiched toughened glass of height 400 mm on main spine with 3 nos brackets, metal modesty panels along the aisles and open ends with all metal surfaces being finished with powder coating of approved colour. Storage unit with 15mm thk.machine pressed pre laminated particle board with 2 drawers along with locking system anddrawer channels, recessed handles and supporting accessories (top one small and bottom one big )with rubber protectors as shown in drawing. Bidder to note that table support shall not be rested on storage and shall be independent. Colour and Make as approved by the Engineer-in -charge. Size of cluster : 3110x2000mm Reference Drawing Number : TCE.11858A-AC-1014-IW-10217 |
| 32 | Modular Desk Type 6: Providing and fixing modular Linear desking system of each unit of size2000X1600X600 &750 (ht)mm Table Top - 25 mm thick machine pressed Pre Laminatedparticle board with 2mm thick PVC edge lipping on all exposed sides, Support - powder coated leg with Supporting MS cross Beam. It shall have vertical and horizontal wire management system with openings for sockets to access the power and data sockets connection for easy access. There shall be separator for data and voice cabling and raceway and 50mm grommet matching the table top colour. Table front and side separator partition shall below height privacy screen of8mm thick sandwiched toughened glass of height 400 mm on main spine with 3 nos brackets, metal modesty panels along the aisles and open ends with all metal surfaces being finished with powder coating of approved colour. Storage unit with 15mm thk.machine pressed pre laminated particle board with 2 drawers along with locking system anddrawer channels, recessed handles and supporting accessories (top one small and bottom one big )with rubber protectors as shown in drawing. Bidder to note that table support shall not be rested on storage and shall be independent. Colour and Make as approved by the Engineer-in -charge. Size of cluster : 3125mm X3925mm Reference Drawing Number : TCE.11858A-AC-1014-IW-10218 |
| 33 | Modular Desk Type 7: Providing and fixing modular Linear desking system of each unit of size2000X1600X600 &750 (ht)mm Table Top - 25 mm thick machine pressed Pre Laminatedparticle board with 2mm thick PVC edge lipping on all exposed sides, Support - powder coated leg with Supporting MS cross Beam. It shall have vertical and horizontal wire management system with openings for sockets to access the power and data sockets connection for easy access. There shall be separator for data and voice cabling and raceway and 50mm grommet matching the table top colour. Table front and side separator partition shall below height privacy screen of8mm thick sandwiched toughened glass of height 400 mm on main spine with 3 nos brackets, metal modesty panels along the aisles and open ends with all metal surfaces being finished with powder coating of approved colour. Storage unit with 15mm thk.machine pressed pre laminated particle board with 2 drawers along with locking system anddrawer channels, recessed handles and supporting accessories (top one small and bottom one big )with rubber protectors as shown in drawing. Bidder to note that table support shall not be rested on storage and shall be independent. Colour and Make as approved by the Engineer-in -charge. Size of cluster :3125mm X4000mm Reference Drawing Number : TCE.11858A-AC-1014-IW-10219 |
| 34 | Modular Desk Type 8: Providing and fixing modular Linear desking system ofsize2525X1925X600 &750 (ht)mm Table Top - 25 mm thick machine pressed Pre Laminatedparticle board with 2mm thick PVC edge lipping on all exposed sides, Support - powder coated leg with Supporting MS cross Beam. It shall have vertical and horizontal wire management system with openings for sockets to access the power and data connection for easy access. There shall be separator for data and voice cabling and raceway and 50mm grommet matching the table top colour. Table front and side separator partition shall below height privacy screen of8mm thick sandwiched toughened glass of height 400 mm on main spine with 3 nos brackets, metal modesty panels along the aisles and open ends with all metal surfaces being finished with powder coating of approved colour. Storage unit with 15mm thk.machine pressed pre laminated particle board with 2 drawers along with locking system anddrawer channels, recessed handles and supporting accessories (top one small and bottom one big )with rubber protectors as shown in drawing. Bidder to note that table support shall not be rested on storage and shall be independent. Colour and Make as approved by the Engineer-in -charge. Size of cluster :2525mmX1925mm Reference Drawing Number : TCE.11858A-AC-1014-IW-10220 |
| 35 | Modular Desk Type 9: Providing and fixingmodular Linear desking system of size1195X1600X600 &750 (ht)mm Table Top - 25 mm thick machine pressed Pre Laminatedparticle board with 2mm thick PVC edge lipping on all exposed sides, Support - powder coated leg with Supporting MS cross Beam. It shall have vertical and horizontal wire management system with openings for sockets to access the power and data sockets connection for easy access. There shall be separator for data and voice cabling and raceway and 50mm grommet matching the table top colour. Table front and side separator partition shall below height privacy screen of8mm thick sandwiched toughened glass of height 400 mm on main spine with 3 nos brackets, metal modesty panels along the aisles and open ends with all metal surfaces being finished with powder coating of approved colour. Storage unit with 15mm thk.machine pressed pre laminated particle board with 2 drawers along with locking system anddrawer channels, recessed handles and supporting accessories (top one small and bottom one big )with rubber protectors as shown in drawing. Bidder to note that table support shall not be rested on storage and shall be independent. Colour and Make as approved by the Engineer-in -charge. Size of cluster :1195mmX1600 mm Reference Drawing Number : TCE.11858A-AC-1014-IW-10221 |
| 36 | Linear Table Type 1 Providing and fixing factorymade 25mm thick machine pressed prelaminated particle boardtable top with vertical and horizontal wire management system and 50mm grommet matching the table top colour with openings for sockets to access the power and data sockets connection for easy accesss, secured with 2mm thick PVC edge binding supported by powdercoated metal support systemwith modesty panel at the sides and footrest as per required angle, Color and Make as per the approval of the Engineer-in -charge. Size : 1500mm X600mmX 750mm Reference Drawing Number : TCE.11858A-AC-1014-IW-10222 |
| 37 | Linear Table Type 2 Providing and fixing factorymade 25mm thick machine pressed prelaminated particle board table top with vertical and horizontal wire management system and 50mm grommet matching the table top colour with openings for sockets to access the power and data sockets connection for easy accesss,secured with 2mm thick PVC edge binding supported by powdercoated metal support systemwith modesty panel at the sides and footrest as per required angle, Color and Make as per the approval of the Engineer-in -charge. Size : 1800mm X 600mmX 750mm + 600mmx300mmx750mm Reference Drawing Number: TCE.11858A-AC-1014-IW-10223 |
| 38 | Linear Table Type 3 Providing and fixing factorymade 25mm thick machine pressed prelaminated particle boardtable top with with vertical and horizontal wire management systemand 50mm grommet matching the table top colour with openings for sockets to access the power and data sockets connection for easy accesss,secured with 2mm thick PVC edge binding supported by powdercoated metal support systemwith modesty panel at the sides and footrest as per required angle, Color and Make as per the approval of the Engineer-in -charge. Size : 1700mm X 600mmX 750mm Reference Drawing Number : TCE.11858A-AC-1014-IW-10224 |
| 39 | Linear Workstation- Type 4 Providing and fixing factory workstation each of sizeof 900mmX 650 mmX 750mm made25mm thk. Pre laminated machine pressed particle board table top secured by 2mm thick PVCedge lippingwithwith vertical and horizontal wire management system and 50mm grommet matching the table top colour with openings for sockets to access the power and data sockets connection for easy accesss and8mm thick sandwiched toughened glass at the centre of two workstations fixed with two brackets at the table top supported by powder coated metal units with footrest of required angle and modesty panel between two workstations and the workstation on theaisle side. Color Make as approved by Engineer-in -charge. Size of cluster : 900mm x1300mm X750mm Reference Drawing Number : TCE.11858A-AC-1014-IW-10225 |
| 40 | Linear Workstation- Type 5 Providing and fixing factory workstation each of sizeof 900mmX 650 mmX 750mm made25mm thk. Pre laminated machine pressed particle boardtable top secured by 2mm thick PVCedge lippingwithwith vertical and horizontal wire management system and 50mm grommet matching the table top colour with openings for sockets to access the power and data sockets connection for easy accesss and8mm thick sandwiched toughened glass at front fixed with two brackets at the table top supported by powder coated metal units with footrest of required angle and modesty panel at side which is facing the aisle. Color Make as approved by Engineer-in -charge. Size : 900mm X 650mmX 750mm Reference Drawing Number : TCE.11858A-AC-1014-IW-10226 |
| 41 | Linear Workstation- Type 5A Providing and fixing factory workstation each of sizeof 900mmX 650 mmX 750mm made25mm thk.Pre laminated machine pressed particle board table top secured by 2mm thick PVC edge lippingwith vertical and horizontal wire management system and 50mm grommet matching the table top colour with openings for sockets to access the power and data sockets connection for easy access, supported by powder coated metal units with footrest of required angle and modesty panel at side which is facing the aisle. Color Make as approved by Engineer-in -charge. Size : 900mm X 650mmX 750mm Reference Drawing Number : TCE.11858A-AC-1014-IW-10226 |
| 42 | Linear workstation -Type 6 Providing and fixing factory made each unit measuring1200mm X 600mmX750mm, 25mm thk. machine pressed Pre laminated particle board table top secured by 2mm thick PVCedge lipping with vertical and horizontal wire management system and 50mm grommet matching the table top colour with openings for sockets to access the power and data sockets connection for easy accesss withlow height privacy screen of 8mm thick sandwiched toughened glassof height 400 mm on main spine with 3 nos bracketssupported by powder coated metal units with footrest of required angle and modesty panel at side and centre. Color Make as approved by Engineer-in -charge. Cluster Size: (1200x1200x750mm) Reference Drawing Number : TCE.11858A-AC-1014-IW-10227 |
| 43 | Tall Storage Cabinet: Providing and fixing factorymadestorage cabinet of 25mm thickprelaminated machine pressed particle boardssecured with 2mm thick PVC edge lippingwith four numbers ofhorizontalunitswith 8mm thickglass shutters with magnetic catches and glass door SS Hinge Overlay at the top portionand Fourprelaminatedshutters for the storage (750mm height) at the bottom with locking facility,SS handles, Soft-Close Concealed Hinges and supporting accessories , executed as per the drawings provided. Color Make as approved by Engineer-in -charge. Refer Tender document for reference image. Storage Unit size L-1500mm-,D-450mm, H-2100 mm) Reference Drawing Number TCE.11858A-AC-1014-IW-10232 |
| 44 | Filing cabinet : Providing and fixing factorymade machine pressed prelaminated particle board storage cabinetand middle support made upof 25mm thick machine pressed prelaminated particle board and 18mm thk four number ofshutterswith locking facility,SS handles, Soft-Close Concealed Hinges and supporting accessories .450mm high intermediate shelves all in 18mm thickness particle board . Color Make as approved by Engineer-in -charge. Refer Tender document for reference image. Storage Unit size W-2950mm,D-450mm, H- 2100mm) Reference Drawing Number :TCE.11858A-AC-1014-IW-10233 |
| 45 | Low height Storage cabinet Providing and fixing factory made storage unit with 25mm thk. machine pressedpre laminated particle board top with 2mm thick PVClipping with two units each consist of onehorizontal divisions with two shuttersandrecessed handles , Soft-Close concealed Hinges, wire manager and supporting accessories.The entire unit is supported by four castors which will help the unit for easy movement. executed as per the drawings provided.Color Make as approved by Engineer-in -charge. Refer Tender document for reference image. Size: 1500mm X 450mm X800 mm Reference Drawing Number TCE.11858A-AC-1014-IW-10230 |
| 46 | TV unit-In Conference room 40 Pax Providing and fixing factory made TV unit with 25mm thk. machine pressed pre laminated commercial plywood topwith 2mm thick PVClipping with four units with four shutters bifurcated by a vertical seperator .Each consist of twohorizontal divisions each accessoried by recessed handles, Soft-Close concealed hinges, wire manager,supporting accessories and castors for easy movement.Color, Make and design as approved by Engineer-in -charge. Refer Tender document for reference image. Size: 2700mm X 450mm X800 mm Reference Drawing No: TCE.11858A-AC-1014-IW-10231 |
| 47 | Over HeadBook Shelf:Type-1 Providing and fixing factory made over head book shelf with 25mm thk. machine pressedpre laminated particle board structure withonehorizontal division of intermediate shelves with 18mm thk particle board with laminate at sides.andequal vertical divisions supported by vertical units with 8mm thickglass shutters with magnetic catches and glass door SS Hinge with satin finish Overlay at the top portionsecured withlocking facility,executed as per the drawings provided. Color Make as approved by Engineer-in -charge. Size: 1800mm X 450mm X600 mm Reference Drawing Number :TCE.11858A-AC-1014-IW-10237(SHEET 1 OF 2) |
| 48 | Over HeadBook Shelf:Type-2 Providing and fixing factory made over head book shelf with 25mm thk. machine pressedpre laminated particle board structure withonehorizontal division of intermediate shelves with 18mm thk particle board with laminate at sides.andequal vertical divisions supported by vertical units with 8mm thickglass shutters with magnetic catches and glass door SS Hinge with satin finish Overlay at the top portionsecured withlocking facility,executed as per the drawings provided. Color Make as approved by Engineer-in -charge. Size: 7250mm X 450mm X600 mm Reference Drawing Number : TCE.11858A-AC-1014-IW-10237(SHEET 2 OF 2) |
| 49 | Over HeadBook Shelf:Type-3 Providing and fixing factory made over head book shelf with 25mm thk. machine pressedpre laminated particle board structure withonehorizontal division of intermediate shelves with 18mm thk particle board with laminate at sides.andequal vertical divisions supported by vertical units with 8mm thickglass shutters with magnetic catches and glass door SS Hinge with satin finish Overlay at the top portionsecured withlocking facility,executed as per the drawings provided. Color Make as approved by Engineer-in -charge. Size: 2200mmX 450mm X600mm+ 725mmX450mm X600mm Reference Drawing Number : TCE.11858A-AC-1014-IW-10237(SHEET 2 OF 2) |
| 50 | Over HeadBook Shelf:Type-4 Providing and fixing factory made over head book shelf with 25mm thk. machine pressedpre laminated particle board structure withonehorizontal division andequal vertical divisions supported by vertical units with 8mm thickglass shutters with magnetic catches and glass door SS Hinge Overlay at the top portionsecured withlocking facility,executed as per the drawings provided. Color Make as approved by Engineer-in -charge. Size: 5700 X 450mm X600 mm Reference Drawing Number : TCE.11858A-AC-1014-IW-10237 (SHEET 1 OF 2) |
| 51 | Over HeadBook Shelf:Type-5 Providing and fixing factory made over head book shelf with 25mm thk. machine pressedpre laminated particle board structure withonehorizontal division andequal vertical divisions supported by vertical units with 8mm thickglass shutters with magnetic catches and glass door SS Hinge Overlay at the top portionsecured withlocking facility,executed as per the drawings provided. Color Make as approved by Engineer-in -charge. Size: 6300X 450mm X600 mm Reference Drawing Number : TCE.11858A-AC-1014-IW-10237 (SHEET 1 OF 2) |
| 52 | Book Storage:Type-1 Providing and fixing factorymade machine pressed prelaminated particle board book shelfwith 10shutters with 4 verticalsof 25mm thick machine pressed prelaminated particle board. Shutters with 8 mm thk toughned glass attached to the prelaminated particle board frame withlocking facility,SS handles, Soft-Close Concealed Hinges and supporting accessories , 6 equal horizontal divisions of 18mm thickness particle board . Color Make as approved by Engineer-in -charge. Size : 3000mmX 600mmX 2100mm Reference Drawing Number : TCE.11858A-AC-1014-IW-10238( SHEET 1 OF2 ) |
| 53 | Book Storage:Type-2 Providing and fixing factorymade machine pressed prelaminated particle board book shelfwith 10shutters with 4 verticalsof 25mm thick machine pressed prelaminated particle board. Shutters with 8 mm thk toughned glass attached to the prelaminated particle board frame withlocking facility,SS handles, Soft-Close Concealed Hinges and supporting accessories , 6 equal horizontal divisions of 18mm thickness particle board . Color Make as approved by Engineer-in -charge Size : 2700mmX 600mmX 2100mm Reference Drawing Number : TCE.11858A-AC-1014-IW-10238( SHEET 2 OF2) |
| 54 | Over Head Unit 1-Canteen area Providing and fixingfactory made over head unit withprelaminated machine pressed heat & moisture resistance base made up of 25mm thick prelaminated board at top and sides , 14mm thick with single sidelaminated at back with intermidiate support and shutters of 15mm thick secured with PVC edge bindingsupportedwithrecessed door ,soft close consealed hinges and supporting accessories indicated as per drawings .colour and Make as approved by the Engineer-in -charge. Full Unit size: 7635mmX350mmX750mm Reference Drawing No : TCE.11858A-AC-1014-IW-10234 |
| 55 | Over Head Unit2 Providing and fixingfactory made over head unit withprelaminated machine pressed heat & moisture resistance base made up of 25mm thick prelaminated board at top and sides , 14mm thick with single sidelaminated at back with intermidiate support and shutters of 15mm thick secured with PVC edge bindingsupportedwithrecessed door ,soft close consealed hinges and supporting accessories indicated as per drawings .colour and Make as approved by the Engineer-in -charge. Size : 4950mm X 350mmX 600mm Reference drawing number : TCE.11858A-AC-1014-IW-10234 |
| 56 | Base Unit Type 1 (Canteen Area) Providing and fixingbase unit below granite counter top with25 thk moisture resistant prelaminated ply on the underside with moisture proof carcases at two levels at 1050 mm and 800 mm respectively ,18 mm moisture resistant prelaminated ply on the front side and shorter side 18mm thk prelaminated ply of vertical support between the storage and 18mm thick machine presssed prelaminated ply of horizontal shutter with 2mm thk. PVC edge lipping supported withrecessed door ,soft close consealed hinges and supporting accessories indicated as per drawings . Number of shutters and horizontal partitions shall be as per the drawings provided by the Engineer-in -charge. Full Unit size: 6670mmX600mmX1050mm Note: Granite top is executed in the civil package. Reference Drawing No :TCE.11858A-AC-1014-IW-10235 |
| 57 | Base Unit Type 2 Providing and fixingbase unit below granite counter top with25 thk moisture resistant prelaminated ply on the underside with moisture proof carcases, 11mm moisture resistant prelaminated ply on the rear side (Ply on one side), 18 mm moisture resistant prelaminated ply on the front side and shorter side(Ply on both sides)18mm thk prelaminated ply of vertical support between the storage and 18mm thick machine presssed prelaminated ply of horizontal shutter with 2mm thk. PVC edge lipping supported withrecessed door ,soft close consealed hinges and supporting accessories indicated as per drawings . Number of shutters and horizontal partitions shall be as per the drawings provided by the Engineer-in -charge. Full Unit size: (7640x600 +1370x600)x 750mm Note: Granite top is executed in the civil package. Reference Drawing No : TCE.11858A-AC-1014-IW-10235 |
| 58 | Base Unit type 3 Providing and fixingbase unit below granite counter top with25 thk moisture resistant prelaminated ply on the underside with moisture proof carcases, 11mm moisture resistant prelaminated ply on the rear side (Ply on one side), 18 mm moisture resistant prelaminated ply on the front side and shorter side(Ply on both sides)18mm thk prelaminated ply of vertical support between the storage and 18mm thick machine presssed prelaminated ply of horizontal shutter with 2mm thk. PVC edge lipping supported withrecessed door ,soft close consealed hinges and supporting accessories indicated as per drawings . Number of shutters and horizontal partitions shall be as per the drawings provided by the Engineer-in -charge. Full Unit size: 3350mmx600mmx 750mm Note: Granite top isexecuted in the civil package. Reference Drawing Number : TCE.11858A-AC-1014-IW-10236 |
| 59 | Lockers: Providing lockers of size 1500mm X 2000mmX450mm , each unit with 500mmX 500mmX450mm mild cold rolled steel, free from imperfections withpowder coat finish. each locker shall have an individual door and frame, an individual top, bottom, back and shelves with common intermediate uprights separating units with seperate doors ventilated by louvers on the face of each door with handle, locking system, number plate, master key and supporting hingees . Refer Tender document for reference image. Reference Drawing Number : TCE.11858A-AC-1014-IW-10239 |
| 60 | Soft Board / Pin Board Providing and fixing factory finished soft boards with wooden edge lipping. The 12mm thick soft board shall be fixed on 12mm thick exterior grade MDF backed cork sheet. The soft board is finally finished in fabric with 3mm thick foam backing and fixed, the soft board shall be held with proprietary gripper as per the manufactures specification adhering to the design intent drawings . Size:900mm X 1200mm. |
| 61 | Writing board -Type 1 6 mm thick wall mountedtoughnedglass with the highest resistance to ink stains, pen marks, scratches and dents backpainted with white paint and magnetic backing frameless design fixed with SS satin finished stand off fixing/direct fixing hardwarewith removable pen tray mounted with ss acceessories. Refer Tender document for reference image. Size: 1500mm X 900mm |
| 62 | Writing board Type 2 6 mm thick wall mountedtougehned glass with the highest resistance to ink stains, pen marks, scratches and dents backpainted with white paint and magnetic backing frameless design fixed with SS satin finished stand off fixing/direct fixing hardwarewith removable pen tray mounted with ss acceessories. Refer Tender document for reference image. Size: 2000mm X 900mm |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
