Tender For Repair/Replacement Of Internal Wiring At East Side Lehl Marg Under Ge(S) Binnaguri
Tender Value
44 Lakhs
Estimated cost
Bid Submission
08 May 2023
0 days left
EMD
88000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
binnaguri → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Repair / Replacement Of Internal Wiring At East Side Lehl Marg Under Ge ( S ) Binnaguri
BOQ
| Sl. No. | Item Description |
| 1 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc for taking credit ( credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and as directed. |
| 2 | M&L for point wiring complete with 1.5 Sqmm multistranded copper conductor single core PVC insulated unsheathed FR-LS cable 1100 volts grade (ISI marked) with proper colour coding drawn through and including non-metallic rigid PVC medium grade conduit not less that 20mm dia and conduit accessories (ISI marked) concealed in wall/fixed to roof, ceiling etc including provision of 1.5 Sqmm PVC insulated multistranded unsheathed copper conductor cable FR-LS (ISI marked) as earth continuity conductor connected to common earth dolly, fabricated sundn terminal box made out of GI sheet steel not less than 1.22 mm thick for boxes upto a size of 200 x 300mm and above this size not less than 1.63 mm thick duly painted with aluminum inside and anticorrosive paint outside, concealed in walls, with 3mm thick bakelite/plastic laminated sheet top cover fixed with cadmium plated iron screws for housing switches, socket outlets, fan regulators etc duly earthed including cutting chases of existing wall for conduits and sinking for boxes and making good to the disturbed surface of wall/floor and matching with existing specifications.Connections of cable with MCBs or bus bar shall be done through proper size copper/brass thimbles. Where concealing of conduit is not feasible ie on surface of roof etc, conduit shall be fixed on surface with necessary saddles at no extra cost all as specified and as directed for the following :-(a) One light point controlled by one way switch 5/6 amps. |
| 3 | (b) One ceiling fan/Exhaut fan point controlled by one way switch 5/6 amps. |
| 4 | (c)One socket out let 5/6 amps point on the same board |
| 5 | (d)One socket out let 5/6 amps point on the independent board |
| 6 | (e)One bell/buzzer point controlled by one bell push button |
| 7 | (f) One light point controlled by two two way switch 5/6 amps. |
| 8 | All as per item No 2 above but wiring with 2.5 sq mm single core copper conductor for one socket out let 15/16 amps point on the independent board complete all as specified and directed. |
| 9 | M&L point wiring with FRLSH PVC insulated unsheathed multistranded copper conductor,conforming to IS-694 of size 1.50 sqmm nominal cross sectional area single core drawn in and including 20/25mm size \"medium grade\" PVC doubled lock Casing-Capping and fittings, including, pressed steel concealed terminal switch boxes not less than 1.2mm thick of reqd size factory made duly painted inside and outside with two coats of black bituminous paint over one coat red oxide primer, 3mm thick plastic laminatedsheet top cover (ISI Marked) fitted with chromium plated brass screws & washers complete including 1.50 sqmm nominal cross sectional area PVC insulated unsheathed multistranded copper conductor green as earth wire connected to earth dolly with all accessories complete all as specified and directed.(a) One light point controlled by one way switch 5/6 amps. |
| 10 | (b) One ceiling fan/Exhaut fan point controlled by one way switch 5/6 amps. |
| 11 | (c)One Socket out let 5/6 amps point on the independent board |
| 12 | (d)One socket out let 5/6 amps point on the same board |
| 13 | (e)One bell/buzzer point controlled by one bell push button |
| 14 | (f)One light point controlled by two 2 way switches |
| 15 | All as per item No 9 above but wiring with 2.5 sq mm single core copper conductor for one socket out let 15/16 amps point on the independent board complete all as specified and directed. |
| 16 | S&F switch piano flush type 5/6 amps single pole one way complete all as specified and directed. |
| 17 | S&F ofswitch piano type 2 way 5/6 Amp, 230 Volt, flush button single pole one way complete all as specified and directed by Engineer -in-Charge. |
| 18 | S&F socket 2 in 1, 5 Pin, 5/6 amps, white ivory finish flash type complete all as specified and directed. |
| 19 | S&F of socket outlet 2 in 1, 5 Pin, 5/15 amp,multipurpose 230 volt flash type complete all as specified and directed by Engr-in-Charge. |
| 20 | S&F in repair Switch socket combination 2 in 1,5A, multipin,flushtype |
| 21 | S&F in repair Switch socket combination 3 pin 16A,multi pin, flushtype |
| 22 | S&F switch piano flush type 15/16 amps single pole one way complete all as specified and directed. |
| 23 | S&Fbell/buzzer push 5/6 amps flush type white/ivory finish complete all as specified and directed. |
| 24 | S&F of call bell ding dong typeAC Single pole 220/240 Volts, surface type complete all as specified and directed. |
| 25 | S&FCeiling rose, surface type with back plate, three terminal /PVC/ polycarbonate, isolated body complete all as specified and directed. |
| 26 | S & F inlamp holder, isolated body, with back plate suitable for batten/anglefittings complete all as specified and directed. |
| 27 | S & F deluxe fan electronic regulator 230 volts AC 50 Hzs rotary step white/ivory finish complete all as specified and directed. |
| 28 | S & F in repair deluxe fan electronic regulator 230 volts AC 50 Hzs rotary step white/ivory finish complete all as specified and directed. |
| 29 | S&F Modular switch 1 way 6A,1 module single pole complete all as specified and directed. |
| 30 | S&F modular socket 2 /3 Pin combined 2 module, 6 amps, complete all as specified and directed. |
| 31 | S&F modular socket 2 /3 Pin combined 2 module, 6/16 amps, complete all as specified and directed. |
| 32 | S&F Modular switch 1 way 16A,1 module single pole complete all as specified and directed. |
| 33 | S & Fmodular fan step regulator 120 W, 2 module complete all as specified and directed. |
| 34 | S&Fmodular bell push 6 amps 1 module complete all as specified and directed. |
| 35 | S&F Modular switch 2 way 16A,1 module single pole complete all as specified and directed. |
| 36 | S&F Modular white cover plate with frame 1 module complete all as specified and directed. |
| 37 | S&F Modular white cover plate with frame 3 module complete all as specified and directed. |
| 38 | S&F Modular white cover plate with frame 6 module complete all as specified and directed. |
| 39 | S&F Modular white cover plate with frame 8 module complete all as specified and directed. |
| 40 | S&F Modular white cover plate with frame 12 module complete all as specified and directed. |
| 41 | S&F, IP 20, class I, LED tube light fittings 20W (or nearest next higher wattage) (4feet), wall/ surface mounted, integrated type with aluminium housing and decorative and caps with integrated high efficiency electronic driver and surge suppressor of 2KV or more, luminaire efficiency > 95 lumens/watt, power factor > 0.90, operating range - 140 to 270 V, 50 Hz fixed with 02 Nos of PVC round/ square blocks, screws etc complete with all accessories internally prewired and connecting up with and including necessary taking down the old unserviceable fitting complete all as specified. (Make: SYSKA ,Havells, Crompton, phillips or equivalent.) |
| 42 | S&F in repairIP 20, class I, LED tube light fittings 20W (or nearest next higher wattage) (4feet), wall/ surface mounted, integrated type with aluminium housing and decorative and caps with integrated high efficiency electronic driver and surge suppressor of 2KV or more, luminaire efficiency > 95 lumens/watt, power factor > 0.90, operating range - 140 to 270 V, 50 Hz g up with and including necessary taking down the old unserviceable fitting complete all as specified. (Make: SYSKA ,Havells, Crompton, phillips or equivalent.) |
| 43 | S & F in repair LED street light fittings 25 Watt ,230 VAC outdoor type with high pressure die cast aluminium housing, heat resistant, toughned glass cover with IP66 protection complete all as spedified and as directed.(Make: SYSKA ,Havells, crompton, Phillips or equivalent) |
| 44 | S&F inIP 20, Class I, LED light fitting10 W, (or nearest next higher wattage) wall /Surface mounted with aluminium housing 2 feet long, integrated type, with high efficiency PMMA diffuser,integrated high efficiency electronic driver & surge suppressor of 2 KV or more, luminaire efficacy > 95 lumens/Watt, power factor >/ 0.90, operating range – 140 to 270 V, 50 Hzfixed with 02 Nos of PVC round/ square blocks, screws etc complete with all accessories internally prewiredand including connecting up with and including twin core twisted flexible copper conductor cable of suitable size including necessary taking down the old unserviceable fitting complete all as specified.(Make: SYSKA ,Havells, crompton, Phillips or equivalent) |
| 45 | S&F in repair Decorative luminiare suitable for wall lightfixture including LED lamp 1x10/15 watt ( B-22 base) ,made of unbrakeable Polycarbonate with Acrylic decorative diffuser, IP-65 protection, and provision of PVC insulated sheathed round flexible wire with multi stranded copper conductor of size 2.50 Sq mm two core complete all as specified and directed(Make: SYSKA ,Havells, Crompton, Phillips or equivalent) |
| 46 | S&F in repair 1x 10 Watt LED Bulkhead light fittings complete with aluminium Alloy grey powder coated housing, Heat resistant prismatic Glass cover with EPDM rubber linning,constant current electronc driver all accessories including provision of three core PVC cable of copper conductor of size 23/.0076 and making connection complete all as specified and directed. (Make: SYSKA ,Havells, crompton, Phillips or equivalent) |
| 47 | S&F Sheet metal enclosure for 8 way Distribution Boards (DB’s), double door, single pole & neutral with 200 amps rated bus bar, IP-20 protection suitable for fixing MCB\"S/lsolators completeincluding taking down the old one complete all as specified and directed by Engr-in-Charge. |
| 48 | S&F Sheet metal enclosure for 4 way Distribution Boards (DB’s), IP-43 doubledoor, Tripple pole & neutral with 200 amps rated bus bar, IP-20 protection, including four pole MCCB 63 Amps with blanking plates complete all as specified and directed. |
| 49 | S&F RCCB/ELCB 4 pole 40 Amp/ 100 mA, 415 Volts all as specified & directed by engr in charge. Make Havells/Equivalent |
| 50 | S&F MCB, Single pole & neutral 6 to32 amps, 240 volts, ‘C’ curve, 10 KAall completeincluding taking down the old one complete all as specified and directed by Engr-in-Charge. |
| 51 | S&F MCB, Single pole, 6 to32 amps, 240 volts, ‘C’ curve, 10 KAall completeincluding taking down the old one complete all as specified and directed by Engr-in-Charge. |
| 52 | Supply and fixing MCCB 100 amps 4 pole adjustable thermal & fixed magmetic setting four pole 415 volt 50 Hz with breaking capacity 10 KAincluding taking down the old one complete all as specified and directed by Engr-in-Charge. |
| 53 | Taking down carefully by unscrewing from boards/ outlet boxes, fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, brackets, ceiling fittings, bulk head fittings, tube light fittings and regulators, etc. all as pecified and as directed |
| 54 | M &L for Earthing complete with GI earth plate electrode 600x600x6mm thick buried directly in ground (Earth pit not less than 2.25M deep below normal ground level) with top edge of the plate not less than 1.5m below normal GL. Connected to galvanized earth lead wire 4mm dia by means of nut, bolt, check nut and washersincluding necessary excavation and earth work in soft/loose soil, GI protection pipe light grade 15mm bore for protecting the GI wire mesh funnel alternate layer of charcoal dust, and saltPCC pit 1:3:6 type C1 using 20mm graded stone aggregate and 50mm thick RCC 1:2:4 type BO using 20mm graded stone aggregate cover re-inforced with 8 mm dia MS TMT bars 80mm C/C both ways complete all as specified and shown in Electrical plate No.3 SSR part-1 and connected to the earth point and testing complete including taking out the old one complete all as specified and directed by Engr-in-Charge. |
| 55 | M & L Sub main wiringconcealed type with two run single core cable PVC insulated cable with4.0Sqmm (Nominal area) multi stranded copper conductor FRLS cable 1100 volts gde incl earth continuity conductor using PVC insulatedcable of stranded copper conductor of size 4.0 Sqmm connected to common earth dolly anddrawing into rigidPVC conduitsof 25 mm dia medium gradesize,making good the disturbed surfacescomplete including taking down old submain wiring.(NOTE : Two run of submain wiring cable alongwith one run of earth wire shall be measured as one length. . |
| 56 | M & L Sub main wiring casing caping type with two run single core cable PVC insulated cable with6.0Sqmm (Nominal area) multi stranded copper conductor FRLS cable 1100 volts gde incl earth continuity conductor using PVC insulatedcable of stranded copper conductor of size 6.0 Sqmm connected to common earth dolly anddrawing into rigidPVC casing capingof size 32 mm medium gradesize,making good the disturbed surfacescomplete including taking down old submain wiring.(NOTE : Two run of submain wiring cable alongwith one run of earth wire shall be measured as one length. . |
| 57 | M&L for street light bracket made out of GI pipe light grade 32 MM dia 1.2 mtr length bent to shape and reduced to required size at top upto 1.2 mtr length by cutting, welding and well finishing including MS clamp of flat iron of size 25 x 5 mm suitable length 2 Nos complete with drilling hole, fixing with runts bolts and washers including painted with two coats aluminium paint over a coat of red oxide primer. |
| 58 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm4 core all fixing and connecting accessories such as cable lugs, cable glands, nut, bolts, complete all as specified and as directed. |
| 59 | Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for foundation of poles/stays/cables etc and getting out in any type of soil. |
| 60 | Returning, filling in, including, spreading, levelling, watering and well ramming in layers n.exc 25cm. |
| 61 | Removing excavated material n.exc 50m and depositing were directed at a level n.exc. 1.5m above the starting level. |
| 62 | M&L for sand cushioning in cable trenches over & under the cable, with river washed coarse sand, as per standard practice with proper compaction complete all as specified and directed by Engr-in-Charge. (Punned thickness 18 cm shall be considered for payment as per para 19.75 of SSR Part-I) |
| 63 | Supply and laying for brick protection for protection of cable over sand cushioning cables inside the trench by using common brunt clay building bricks sub-class “B” old size brick and flat and width wise along the axis of the trenchcomplete all as specified and directed by Engr-in-Charge. |
| 64 | Supply and fixing 40 mm dia GI tubing medium grade ISI marked laid in trenches / laid under floor for protection of cable including all fittings such as elbow, bends, etc and short length complete all as specified and directed. |
| 65 | Supply and fix in repair suspended architectural 20W LED lumimiare provides soft-light and glare free symmetrical illumination (with continous mounting and cap) including provision of three core PVC cable of copper conductor of size 23/.0076 and making connection complete all as specified and directed. (Make : Havells, Syska, Crompton or equivalent) |
| 66 | Taking down ceiling fan/exhaust fan sealing cable end, dismantling blades and removing fan and blades to store complete all as specified by Engr in charge |
| 67 | M & L for painting of ceillingfan of any make/model and size complete with one coat of 1st grade quality of synthetic whiteenamelled paint by spraying including preparation of old paianted surface to remove all dust, oil mark etc and filling cavaties with filler materials, before painting, complete writing the MES numbers on ceiling fan with flack synthetic enamel paint of 1st grade quality by stenciling with uniform size of letters/of figures n.exc 20 mm in height letters/figures to be written in each fan complete all asspedified and directed. |
| 68 | M & L for rewindingof coils of ceiling fans of sweep 1200/1400 mm of any make by usingsuper enamelled copperwire as per existing gauge and approved quality including heatvarnishing drying up overhauling and testing complete all as specifiedand as directed. |
| 69 | All as per item ser No 68.00 here-in -above but of exhaust fan of sweep 300mm to 380mm |
| 70 | Supply only parts /components of ceiling fan as per existingmake and size complete all as specifed and as directed(Note: Partsand components suppliedunder this item shall be fixed under itemNo 68 here in before).(a)Gun metal bush metal bush of any size. |
| 71 | (b )Ball bearing . Make : NBC/ABC/SKF |
| 72 | (c) Paper condenser 2.5 MFD (Make: USHA/SHARITTA/KEITRON/UNIVERSAL |
| 73 | (d) Connector bakelite two terminal each end |
| 74 | (e) Rubber bush with MS bolt and nut |
| 75 | (f) PVC canopy for ceiling fan of Make: USHA/GEC/POLAR/HIMADRI/CROMPTON/KASSELS as applicable. |
| 76 | Supply only parts /components of exhaust fan as per existingmake and size complete all as specifed and as directed(Note: Partsand components suppliedunder this item shall be fixed under itemNo 69 here in before).(a) Gun metal bush bearing |
| 77 | (b) Ball bearing (Make: NBC/SKF/ARC/ANT) |
| 78 | (\"c) Paper condenser 4 MFD (Make: USHA/SHARITTA/KEITRON/UNIVERSAL |
| 79 | (d) Set of exhaust fan blades with screws (Set of three blades)(Make: GEC/UNIVERSAL) |
| 80 | M & Lin replacementfor down rod of 30 cmheightfabricatedout of MS pipe12mm dia heavy duty duly paintedwith whitepaint suitable to ceilingfan of any description , make , brand and model after taking down old existing unserviceable down rod complete all asdirected at site. |
| 81 | M & Lin replacementfor MS louvers with nuts, bolts and washers suitableto exhaust fan 300/450 mm sweep of any description make and model after taking down old existingunserviceable PVC MS louvers complete all as directed. |
| 82 | M&L in replacement for suitable frames of 300/450 mm sweep exhaust fan of any description make and model after taking down old existing unserviceable frames complete all as directed. |
| 83 | M & Linreplacementfor standard MS clamps with rubber shoe withbolts suitable to exhaust fan of any description, make and model after taking down old existing unserviceable clamps complete all asdirected. |
| 84 | Supply fix in repairs blade set (set of three blades) 1200/1400 mm sweep as per existing make and size all as specified and directed. |
| 85 | Hanging only ceiling fan and connecting up including provision of flexible cable from ceiling rose or connector to fan complete all as specified and directed |
| 86 | Taking out Sheet metal enclosure of 12/8/6/4/2 way Distribution Boards from its original position and refixing after the B/R work /or any directions by engr-in-charge at the same place complete all as specified and as directed.Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender, from total amount of Schedule \"A\"/BOQ |
AI Tender Summary
Tender Timeline
Apr 17, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedMay 08, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMay 10, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender