Tender For Repair/ Maint Leakage/ Seepage, Fencing, Flooring, Wall Cracks, Roof Treatment, Kitchen Hardware, Cupboards, Painting And Certain Works In E/M Installations
Tender Value
Ref. Documents
Estimated cost
Bid Submission
15 May 2023
0 days left
EMD
1.73 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
sulur → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Repair/ Maint Leakage/ Seepage, Fencing, Flooring, Wall Cracks, Roof Treatment, Kitchen Hardware, Cupboards, Painting And Certain Works In E/M Installations
BOQ
| Sl. No. | Item Description |
| 1 | SCHEDULE A BOQ |
| 2 | Dismantling fencing wire mesh, barbed wire etc any type and any size complete all as specified and as directed.Note: The unit rate quotedis deemed to be included for Removing of accumulated earth of any width and depth upto 15 cm cleaning/cutting the grass/ trimming down shurbs/ branches/ small trees with hand operated petrol/kerosene driven grass cutting machine and removing the grass waste around 3 m from fencing postin outside MD land |
| 3 | Excavating in post holes (or similar holes) in any type of soil, each not exc 0.5 cum, getting out in hard dense soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cmincluding demolition of existing damaged foundation of fencing posts complete all as specified and as directed. |
| 4 | M&L M S angle iron Posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc. flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc and similar work conforming to Fe-290 Gde E-165 including dismantling posts or struts (wood, steel or RCC) any section, complete all as specified and as directed. |
| 5 | M&L Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other to be fitted with washers and one hexagonal or square nuts, n exc 5cm long diameter of neck 5 to 10mm including taking down existing one complete all as specified and as directed. |
| 6 | M&L PCC 1:4:8, type D-2,using 40mm graded stone aggregate as in foundation filling and mass concrete etc complete all as specified and as directed. |
| 7 | M&L Plain Cement concrete 1:3:6,type C-1, (using 20mm graded crushed stone aggregate) as in foundation of fencing post, filling and mass concrete etc complete all as specified and as directed. |
| 8 | M&L Straining and fixing only chain link fencing includingline wires, any mesh, size and type to any type of standards, rails, straining bolts etc including provision 10mm dia MS bars as line wire welded to fencing posts and MS flat iron for fixing fencing wire mesh complete all as specified and as directed.Note : Supply only 10mm dia round bars and chainlink mesh will be measured and paid separately measured and paid. However, labour aspect for fixing is deemed to be included in this item |
| 9 | Supply only Chain link mesh, made of galvanised wire and shallconfirm to IS 2712.2003 and having zinc coating of type heavy as laid down in IS 4826 complete all as specified and as directed. |
| 10 | Supply only 10mm dia round bars, cut to length ,hooking ends as in wooven/ straining bar (stiches through chain link fencing between post) complete all as specified and as directed. |
| 11 | M&L Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins, etc complete all as specified and as directed (Note:- each line of wire to be measured). |
| 12 | M&L PCC 1:3:6, type C-1(using 20 mm graded stone aggregate) as in precast cement concrete solid building blocks or slabs 10cm thick (with plain or interlocking joint as directed) setting in cement mortar (1:4), in walls including demolition of existing damaged walls complete all as specified and as directed. |
| 13 | M&L Preparation of new steel surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed. |
| 14 | M&L Preparation of new steel surfaces under 10 cm width or girth and applying two coats of synthetic enamel paint over a coat ofof red oxide primer complete all as specified and as directed. |
| 15 | Note for item No 13 & 14 :-(a) All synthetic enamel paint,shall be of 1st quality manufactured by the standard firms of make as specified. |
| 16 | (b) The contractor shall inform the GE, within three weeks of the acceptance of the tender, the brand/names of the manufacturers of paint proposed to be used in the works and submit samples thereof and obtain prior written approval of GE before their use in works. |
| 17 | (c) The contractor shall when so required by the GE, produce certificate from the manufacturer or their representative to establish that the brands of paints purchased by the contractor from them, satisfy the requirements of the relevant Indian Standards. Tint of paint will be approved by the GE. |
| 18 | (d)Paints shall be obtained directly from approved manufacturer or from their authorized agents only of respective brands mentioned below and brought to site in sealed containers. The paint so procured shall be of first quality of any approved make as per list of makes specified. i. Berger Paints (Luxol), ii. Jenson & Nicholson (Brolac), iii. Shalimar Paints(Superlac), iv. Goodlass Nerolac (Nerolac), v. Asian Paints(Apcolite) |
| 19 | (e)Unless otherwise specified the tints of paint shall be as approved by the GE |
| 20 | (f) The contractor shall submit samples of the paints proposed for the work along with results of tests conducted in approved laboratory as directed by the Engineer-in-Charge for approval. |
| 21 | (g) The surface shall be thoroughly cleaned and dusted. All dirt scales oil and grease shall be thoroughly removed before painting is started. The prepared surface shall be inspected and approved by the GE before painting is commenced. The weather shall not be foggy/rainy, dusty or windy. The suitability of the weather will be determined by the Engineer-in-Charge. |
| 22 | (h) No hair marks from the brushor clogging of paint buddles shall be left on the work. Surface shall ordinarily not be painted until it has dried up completely. Trial patches of paint shall be laid at intervals to check if drying is satisfactory. |
| 23 | Demolition of brick work masonry, built in cement mortar including all quoins, pillars etc., complete all as specified and as directed. |
| 24 | M&L Brickwork with fly ash’ bricks using with old size bricks, straight or curved on plan exc 6m mean radius built in cm 1:4 , complete all as specified and as directed |
| 25 | Description all as per item No 24 here in above but except bricks. Note:Serviceable bricks obtained from Sl item No 23 be reused. |
| 26 | M&L Rendering 15 mm thick in two layers onbrick or concrete surfaces,first coat 10mm thick in cement mortar1:6 and 2nd coat 5mm thick in cement mortar1:6 mixed with water proofing compound as per manufacturer instructions finished even and smooth without using extra cement complete all as specified and directed. |
| 27 | Supply only water proofing compound |
| 28 | M&L applying two coats of cement based paint over a coat of alkali resistant primer on newly plastered surfaces of walls including preparation of new surfaces complete all as specified and as directed. |
| 29 | Note for item here in above:-(i)Before applying cement based paint ,the surface shall be thouroughly wetted to control surface suction. The surface shall be moist but not dripping wet when the paint applied .Surfaces which readily absorb moisture shall be wetted in one operation not more than one hour before painting.Surfaces which absorb moisture slowly shall be wetted in at least two operations not less than 30 minutes apart. |
| 30 | (ii)To maintain a uniform mixture and to prevent segregation ,the paint shall be stirred frequently in the bucket. |
| 31 | (iii)Painting surfaces shall be cured as soon as paint has hardened so as not to be damaged by the spray about 12 hours after the applications. |
| 32 | (iv)Cost of scaffolding required deemed to be included in the quoted rate of item and nothing extra shall be admissible on this account. |
| 33 | (v) Work will be carried out through authorised applicator/ agency of approved manufacturer by GE and colourshall be asapproved by Engr in charge . |
| 34 | M&L Rendering 15 mm thickin cement mortar 1:4 on fair face of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 35 | M&L 100 mm thick Plain cement concrete1:4:8type D-2(using 40 mm gradedstone aggregate ) as in sub base , fillng and mass concrete or as in receiving tiles/ surface channels and drains etc including demolition complete all as specified and directed. |
| 36 | M&L Chequered cement concrete tiles 30cmx30cmx25mm thick machine pressed set jointed and pointed in neat cement slurry as in floors and cut and polished using grey cement andpigments over screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement mortar (1:4) includingdemolishing the existing tile complete all as specified anddirectedNote : The manufacturer\"s test certificate andindividual test certificate for tilesmust be submitted for approval by the concerned authority prior to installation/fixing. |
| 37 | M&L Checking of floor, plinth, plaster etc requiring masonry work and carrying out minor repairs such as edges, patches etc, including petty repairs material like sand, cement & aggregate to make it functional complete all as specified and as directed by Engineer-in-Charge. The rates for plastering / plinth include for: (a) Preparing the surfaces.(b) Thickness of plaster/plinth key in joints, etc. (c) Anises, chamfers of any width, internal rounded angles upto 80mm in width or girth external rounded angles upto 80mm in width or girth.(d) All materials, labour and equipment & supply of integral waterproofing compound, (e) Scoring surface of plastering for key, where the surface is not required to be finished fair.(f) Plastering in patches (in repairs), exc 3 sq.m each patch, for preparing old walls to receive plastering\". Nothing extra shall be admissible for matching with existing work etc. (g) Any individual patch (other than nail hole, plug hole, etc.) are included for provided existing surface finish . |
| 38 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth for foundation, cesspits, manholes, pier holes, etc. and getting out in hard/dense soil complete all as specified and as directed. |
| 39 | Removal of excavated material to a distance exceeding 1.50 Km andnot exceeding 5.00 Km and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed. |
| 40 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and as directed |
| 41 | M&L Taking down cement plaster on brick or stone walls, or concrete or ceilings etc., including raking out joints, hacking for key, scrubbing down with water, etc., including removal of rubbish off the premises, removal and depositing serviceable materials where directed and leaving the work clear of any plastering and material and labour for Rendering 15 mm thick in two layers onbrick or stone or concrete surfaces,first coat 10mm thick in cement mortar1:4 and 2nd coat 5mm thick in cement mortar1:4 mixed with water proofing compound as per manufacturer instructionsfinished even and smooth without using extra cement completeall as specified and directed. |
| 42 | Note for Item No 41 :- (a) Supply only water proofing compound shall be measured and paid seperately. |
| 43 | M&L Preparation of new plastered surfaces wall/ ceiling and applying two coat of white washing on ceiling/ walls surfaces complete all as specified and directed. |
| 44 | M&L Preparation of new plastered surfaces wallapplying two coat of OBD over a coat of alkali resistant priming paint complete all as specified and directed. |
| 45 | M&L Machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size, polished confirming to IS-15658 of 80mm thickness M-40 grade, laid over and including M sand cushion of 50mm thick and packing the sides with PCC 1:3:6 type C1 (using 20mm graded stone aggregates)complete incl dismantling of existing tiles all as specified and directed. Note : The Unit rate quoted is included for Demolition of paver tiles of any description or thickness in floors,aprons etc laid bedded and pointed in any mortar and removing of debris outside of MD land |
| 46 | M&L Hardcoreofgaugenotexceeding 63mmofbroken stonesorboulders,deposited,spreadandlevelledin layersnotexceeding 15cmthick,wateredand rammed to a true surface including removal of existing completeall as specified and directed. |
| 47 | M&L Pre painted Coloured corrugated Galvalume roofing system sheet 0.50 mm thick having Zinc aluminum alloy coating AZ150 shall be as per IS:277/ASTM 1379 150 gsm/ sqm double ribbed trapezoidal profile steel sheetany colour having tensile strength of 550 Mpa as in Roof covering /cladding to wall fixed with self tapping screws including dismantling of existing one all complete all asdirected. |
| 48 | M&L Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mmthick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws including dismantling of existing one all as directed. |
| 49 | Note for pre-painted coloured Galvalume roofing :- |
| 50 | (i) The manufacturer\"s test certificate andindividual test certificate for the chemical and mechanical properties of sheet must be submitted for approval by the concerned authority prior to installation. |
| 51 | (ii) The contractor shall ensure that no leakages take place from the roof. The roofing shall be Coloured Galvalume roofing system (olive green colour or as approved by GE) with feed material manufactured from 0.50 mm Totalcoated thickness (TCT), minimum 550 MPa yield strength and shall conform to the physical specifications of IS: 2062 of 2011, coated with hot dip metallic Aluminium / Zinc alloy coating AZ150 as 150 gm/sq.mt total on both sides complete all as specified and as directed. |
| 52 | (iii) The painting shall be coloured baked enamel polyesterwith silicon coatingoffilm thickness 25 microns nominal on the exposed face/exterior side and on the reverse side ( interior face) shall be white with 15 microns film thickness, over a coat of 5 micron nominalthickness Primer. |
| 53 | (iv) The contractor shall produce purchase vouchers for each lot and independent test for verification of Engineer-in-Charge. |
| 54 | S&F Mild Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 gradeSt.-240) including dismantling existing one complete all as specified and as directed. |
| 55 | S&F Mild Steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted , bolted or welded attachment.(Fe 410 -W (Gde- E-250) quality -A complete including dismantling existing oneall as specified and as directed. |
| 56 | S&F MS flat iron wind ties for roof including securing bolts including all necessary drilling, bolting or riveting, etc. , and similar work conforming to Fe-290 Gde E-165 complete all including dismantling existing one as specified and as directed. |
| 57 | M&L in repairs Granite work(of any type) 18 to 20mm thick(table rubbed and polished including round edge) in steps, jambs, pillars, window cills, cooking platforms, wash basin platformand like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with granite shade over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed by Engineer-in-Charge. |
| 58 | S&F Collapsible steel gates, top hung consisting of channel pickets, pivoted flat bars, top andbottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, including taking down existing one complete all as specified and as directed. |
| 59 | M&L 100mm thick, plain cement concrete (1:3:6), type C-2 (using 40 mm graded mechanically crushed stone aggregates),as in plinth protection/path/hardstanding including making joints @ 3.00 metre intervals and at each corner, the joint shall be filled with mastic filling (to full depth) comprising of one part heated hot blown bitumen 85/25 & two parts heated sand (by volume), surface finished even and smooth without using extra cement including demolition of existing damaged cement concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thickness and rubbish material shall be disposed to out side MD land complete all as specified and as directed. |
| 60 | M&L Water proofing treatment of existing roofs as per details given below after complete removal of existing water proofing treatment and expose of top surface of RCC slab of any thickness, any type by stripping out old tar felt over roofs, parapets, chimney stacks etc laid horizontally or vertically including taking out layer of cement plaster etc and cleaning the surface with water and using wire brush including removing debris to outside the MOD land complete all as specified and as directed :- |
| 61 | (a) Surface should be free from any loose paint, dust or grease.Remove all existing bitumen coatings completely by using intense wire brushing, high speed water jet & vacuum cleaner for thorough cleaning of the surface to avoid ‘Peeling off’ problems. |
| 62 | (b) All cracks at corner joints, channels and parapets should be properly treated.For filling cracks upto 3mm crack seal material of M/s Asian paints or equivalent inM/s Dr Fixit or M/s Pidilite or M/s Sika chemical to be used. Bigger cracks, damagedportions & hollow areas must be repaired with polymer modified cement mortar. |
| 63 | (c) Apply a coat of self priming smart care damp proof ultra (Code 5698) ofM/s Asian paints or equivalent in M/s Dr Fixit or M/s Pidilite or M/s Sika chemical with 33% dilution with water using brush/roller on newly plastered surface after curing as per IS-456 and allow to dry for 4 to 6 hours (dilution & forced coverage requirement strictly as per manufacturer’s instructions). |
| 64 | (d) After the primed surface has dried, apply first coat of water proofing smart care damp proof ultra (Code 5698) of M/s Asian paints or equivalent in M/s Dr Fixit or M/s Pidilite or M/s Sika chemicalusing brush/roller on the same primed surface & allow to dry for 4 to 6 hours. |
| 65 | (e) Prepare for apply 2nd coat of water proofing smart care damp proof ultra (Code 5698) of M/s Asian paints or equivalent in M/s Dr Fixit or M/s Pidilite or M/s Sika chemicalusing brush/roller on the same surface.The temp to be maintained 25 to 35° C through out the all above application work. |
| 66 | (f) In case of severe dampness an additional coat of damp proof materials to be applied. |
| 67 | Note for item No 60 to 66 :- (i) The work shall be carried out through authorized and qualified applicators of the following manufacturers only. MOU to be submitted before commencement of work. Make : M/s Asian paints or equivalent in M/s Dr Fixit or M/s Pidilite or M/s Sika chemical |
| 68 | (ii) A performance guarantee certificate for 10 years shall be submitted by the contractor to the GE on completion of work as specified. |
| 69 | (iii) The unit quoted rate is deemed to include taking down of water pipeline, tanks, wires (etc) found on roof and refix at the original position after complete treatment of roof. |
| 70 | (iv)The unit quoted rate shall be inclusive of material, all labours, tools and plants including scaffolding required for working upto approx 7.5 mtr height from natural ground level. |
| 71 | (v)The unit rate quoted for item is deemed to include for Removing of accumulated earth of any width and depth upto 15 cm cleaning/cutting the grass with hand operated petrol/kerosene driven grass cutting machine and removing the grass waste around 3 m from plinth protectionto outside MD land. |
| 72 | (vi)Adoption of necessary safety arrangement like safety belts, ropes, helmets, netting etc. which are required for safety of working labour at height exceeding 3 to 25 mtr height shall be mandatary and deemed to be included in the unit rate quoted. |
| 73 | M&Lproviding PCC 1:2:4 type B1 using 20mm graded stone aggregates as in roofor in any position tobring upto the slopeof average thickness of 50 mm including Dismantling existing cement concrete/ roof tiles and removing debris to outside MOD land completeall as specified and directed. |
| 74 | Dismantling existing cement concrete on roof and removal to a distance exc 1.5 KM but not not exc 5 KM and deposited as directed. |
| 75 | M&L Plain cement concrete type B-1, 1:2:4 (20mm graded stone aggregate) as in roof kerbs, benching rounded or chamfered onedge all as specified complete all as directed. |
| 76 | M & L Aluminium powder coated ofthree track sliding window outer frame top & sides (section no-20831) of size 92.0x31.75x1.5mm weighing 1.06 Kg/m, frame bottom (Section No 20832) of size 92.0x31.75x1.5mm weighing 1.248Kg/m , shutter to plain vertical (Section No 21093) of size 39x18x1.5mm weighing 0.634 Kg/m, shutter interlock vertical frame (section 21094) of size 39x18x1.55 weighing 0.734 Kg/m, shutter bottom horizontal frame (Section No 20551) size 40x20x1.5mm weighing 0.484 Kg/m, with powder coating of min thickness 50 micron , sliding type with out sash bars, 4mm thickness colour glass, rubber packing, snap beading screws with stainless steel wire mesh, including taken existing window with chowkats of any size, completet all as specified |
| 77 | M&L Preparation of plastered or un plastered old surfaces of walls, Chajja, balcony, facia etc. by brooming down or steel wire brushing scrapping down, smoke shoots moulds, mass efforescent salt, treating oil and greasy spots etc and applying one coat of cement based paint complete all as specified and directed. |
| 78 | Note for item No 77:-(i)Before applying cement based paint ,the surface shall be thouroughly wetted to control surface suction. The surface shall be moist but not dripping wet when the paint applied .Surfaces which readily absorb moisture shall be wetted in one operation not more than one hour before painting.Surfaces which absorb moisture slowly shall be wetted in at least two operations not less than 30 minutes apart. |
| 79 | (ii)To maintain a uniform mixture and to prevent segregation ,the paint shall be stirred frequently in the bucket. |
| 80 | (iii)Painting surfaces shall be cured as soon as paint has hardened so as not be to damaged by the spray about 12 hours after the applications. |
| 81 | (iv)Cost of scaffolding required deemed to be included in the quoted rate of item and nothing extra shall be admissible on this account. |
| 82 | (v) Work will be carried out through authorised applicator/ agency of approved manufacturer by GE and colourshall be asapproved by Engr in charge . |
| 83 | (vi) Application of cement base paint shall be done through mechanical means. |
| 84 | M & L preparation of old decoratedplastered or unplastered surfaceof wall, chajja, balcony, facia etc., brooming down or steel wire brushing down smoke soot, moulds mass, efflorescent, trading, oil, greasy spots and applyingone coat of whitewashcomplete all as specified and directed. |
| 85 | M & L preparation of old plastered or unplastered surfaceof ceiling brooming down or steel wire brushing down smoke soot, moulds mass, efflorescent , trading, oil, greasy spotsand applyingone coat of white wash complete all as specified and directed. |
| 86 | M & L preparation of old plastered surfaces of wall by using pressure washer, removal all dirt and dust and applying one coat of exterior emulsion weather proof paintcomplete all as specified and as directed. |
| 87 | M&L Preparation of old decoratedplastered or unplastered surfaceof wall, brooming down or steel wire brushing down smoke soot, moulds mass, efflorescent , treading, oil, greasy spots and applying one coat oil bound distemper complete all as specified and as directed. |
| 88 | M&L Preparation of old painted wooden surface of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint using mechanical means complete all as specified and directed. |
| 89 | M&L Preparation of old painted steel surface of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint using mechanical means complete all as specified and directed. |
| 90 | Note for item No 88 & 89 :-(a) All synthetic enamel paint shall be of 1st quality manufactured by the standard firms of make as specified. |
| 91 | (b) The contractor shall inform the GE, within three weeks of the acceptance of the tender, the brand/names of the manufacturers of paint proposed to be used in the works and submit samples thereof and obtain prior written approval of GE before their use in works. |
| 92 | (c) The contractor shall when so required by the GE, produce certificate from the manufacturer or their representative to establish that the brands of paints purchased by the contractor from them, satisfy the requirements of the relevant Indian Standards. Tint of paint, will be approved by the GE. |
| 93 | (d)Paints shall be obtained direct from approved manufacturer or from their authorized agents only of respective brands mentioned below and brought to site in sealed containers. The paint so procured shall be of first quality of any approved make as per list of makes specified. i. Berger Paints (Luxol), ii. Jenson & Nicholson (Brolac), iii. Shalimar Paints(Superlac), iv. Goodlass Nerolac (Nerolac), v. Asian Paints(Apcolite) |
| 94 | (e )Unless otherwise specified the tints of paint shall be as approved by the GE |
| 95 | (f) The contractor shall submit samples of the paints proposed for the work along with results of tests conducted in approved laboratory as directed by the Engineer-in-Charge for approval. |
| 96 | (g) The surface shall be thoroughly cleaned and dusted. All dirt scales oil and grease shall be thoroughly removed before painting is started. The prepared surface shall be inspected and approved by the GE before painting is commenced. The weather shall not be foggy/rainy, dusty or windy. The suitability of the weather will be determined by the Engineer-in-Charge. |
| 97 | (h) No hair marks from the brushor clogging of paint buddles shall be left on the work. Surface shall ordinarily not be painted until it has dried up completely. Trial patches of paint shall be laid at intervals to check if drying is satisfactory. |
| 98 | Removing plant/Uprooting of vegetation growth including roots on wall/roof/parapet/Shaft portion , near pipes etc and applying acid treatment afterremoving roots for preventing regrowth and making good disturbed surfaces/area in superficial area exc 150sq.cm but n.exc 400 sq.cm and averaging depth not exceeding 10 cm by using PCC 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) or 10mm thick plastering in cement mortar 1:3 as required and finishing the surfaces to match with the existing surface complete all as specified and directed. |
| 99 | Note for item No 98 :- (a) Rate quoted by the tenderer shall be deemed to inclusive of double steel scaffolding. |
| 100 | (b)Contractor shall provided safety gears to his workers at his own cost and safety precaution to avoid accidents. |
| 101 | M&L Hacking out old broken glass (any thickness, size, quality or description) from wooden frames/steel frames glazed with putty or fixed with beads and material and labour for4mm thick plain sheet glass ordinary quality and glazed with oil putty or fixed with fillets 2nd class hard wood of sectional area not exc 3 Sqcm and glass not exc 0.5 sqm in each pane complete all as specified and directed. |
| 102 | M&L Hacking out old broken glass (any thickness, size, quality or description) from wooden frames/steel frames glazed with putty or fixed with beads and material and labour for4mm thick plain sheet glass ordinary quality and glazed with oil putty or fixed with fillets 2nd class hard wood of sectional area not exc 3 Sqcm and glass exc 0.5 sqm in each pane complete all as specified and directed. |
| 103 | M&L Vitrified Ceramic tiles 10 mm thick, lightshade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over andincluding screed bed or bedding layer, 15 mm thick in Cement Mortar 1:6complete including dismantling of existing tile and disposal off to outside MD land all as specified and as directed. |
| 104 | M&L Vitrified Ceramic tiles 10 mm thick, lightshade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in vertcal surfaces such as skirting/ dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over andincluding screed bed or bedding layer ,15 mm thick in Cement Mortar 1:6complete including dismantling of existing tile and disposal of to outside MD land all as specified and as directed. |
| 105 | Note for item No 103 & 104:- (i) Vitrified tiles are classified under group B1a of the international Standard for ceramic tiles ISO: 13006. Tiles shall be hard, dense, impervious and frost resistant. Water absorption of tiles shall be less than 0.5% and flexural strength (Modulus of Rupture) shall be more than 35 N/Sqmm. (ii) The manufacturer\"s test certificate andindividual test certificateof Tilesmust be submitted for approval by the concerned authority prior to installation. |
| 106 | S&F 25mm outer dia of pipes3-layer PP-R (P o l y p r o p y l e n e random copolymer) concealed pipe SDR 7.4 (PN16) UV stabilized andantimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain &brass threaded p o l y p r o p y l e n e random fittingsfixed complete to walls, ceilings or infloors etc.including taking down existing pipe all as specified and directed. |
| 107 | S&F 20 mm outer dia of pipes3-layer PP-R (P o l y p r o p y l e n e random copolymer) concealed pipe SDR 7.4 (PN16) UV stabilized andantimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain &brass threaded p o l y p r o p y l e n e random fittingsfixed complete to walls, ceilings or infloors etc. including taking down existing pipe all as specified and directed. |
| 108 | Note for item No 106 & 107 :-(a)The unit rate shall be include for taking down existingpipe and connections and all fittings as directed. |
| 109 | (b) The unit rate quoted shall deemed to include the cost of short lengths, with all pipe fittings such as bends, tees, short pieces connectors, elbows, reducers, unions, sockets etc and fixing accssories such as pipe hooks, screws clamps etc |
| 110 | (c ) Wall thickness of pipes shall be all as per IS : 15801 |
| 111 | S&F 20mm outer dia of pipes PPR gate valves (brass insert) as per requirement of sites incl taking down existing one complete all as specified and directed. |
| 112 | S&F 25mm outer dia of pipes PPR gate valves (brass insert) as per requirement of sites incl taking down existing one complete all as specified and directed. |
| 113 | M&L in repairs Machine cut kota stone slab flooring 20-25mm thick over cement 25mm screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including screed bed or bedding layer, 15 mm thick in Cement Mortar 1:4 including Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc complete all as specified and as directed. |
| 114 | M & L Renewingcement concrete tilesin patches, area n exc 5 sq.m. Including removing and cleaning old tiles, preparing beds and laying or setting, jointing and pointing new or old tilescomplete all as directed.Note : The rate included for cutting out broken tiles, removing and cleaning loose tiles, preparing bed removing rubbish, roming and replacing old with new tiles to match, complete with all cuttings etc, that may be required. New tiles requiredis deemed to be included all as directed. The unit rate is also including necessary bedding in cement mortar (1:4) 15 mm thick complete all as specified and directed. |
| 115 | M&L Taking down steel tubing 25 mm bore and connections including cleaning and refixing of old GI tubing 15mm bore including connections in new or old position (wall, ceiling & floor complete all as specified and as directed. . Note :- The unit rate quoted is inclusive for necessary fittings required for re-connection. |
| 116 | S&F Mild steel work in framed work such as grills and similar work including framed guard bars, barred iron doors, ladders, framed balusters etc., including of fixing of sheet steel or other covering to doors etc., to be prepared for hanging /sliding with or including either hooks or hinges or steel hanging door fittings etc., confirming to Fe 410-0 or Fe 310-0 work complete including Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified and directed. |
| 117 | Taking down chowkhat or frame(wooden/steel) not exceeding1.5 Sqm each with shutter (with out taking off shutters from the frame) all as specified and as directed. |
| 118 | Taking down chowkhat or frame(wooden/steel) exceeding 1.50 Sqm not exceeding4.0 Sqm each with shutter (with out taking off shutters from the frame) all as specified and as directed. |
| 119 | Taking down shutters of any description exc 1.0 Sq.m andn.exc 2.0 Sq.m each complete all as specified and directed. |
| 120 | Resecuringwithout taking down chowkhats or frames but with shutters (without taking off shutters from the frames) not exc 1.5 sqm each complete all as specified and directed. |
| 121 | Resecuringwithout taking down chowkhats or frames but with shutters (without taking off shutters from the frames)exc 1.5 sqm but n exc 4 sqm each complete all as specified and directed. |
| 122 | S&F MS work (flat iron) 25mm x 3mm thick, in small articles such as hold fast and similar small articles conforming to Fe 290 Gde E-165 including taking down existing one complete all as directed. |
| 123 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube complete all as specified . |
| 124 | S&F Factory made Solid PVC Door Shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails.MS frame shall be covered with heat moulded plain colour PVC\"C\"channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail.Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitablePVCsheetbeadingand jointed together with solvent cement complete all as specified. |
| 125 | M&L Second class hard wood plain, solid, straight Chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at jointscomplete all as specified and directed. |
| 126 | Supply and fixing 200 mm long aluminum anodized barrel tower bolt extruded section complete all as specified and as directed. |
| 127 | Supply and fixing in repairs 200 mm long aluminum anodized barrel tower bolt extruded section complete all as specified and as directed. |
| 128 | Supply and fixing 100 mm long aluminum anodized barrel tower bolt extruded section complete all as specified and as directed. |
| 129 | Supply and fixing in repairs 100 mm long aluminum anodized barrel tower bolt extruded section complete all as specified and as directed. |
| 130 | S&F Floor door stopper of aluminium alloy body and tongue anodized with hard drawn steel spring fixed in floor overall 140mm complete all as specified and as directed. |
| 131 | S&F Floor door stopper of aluminium alloy body and tongue anodized with hard drawn steel spring fixed in floor overall 140mm complete including taking down existing oneall as specified and as directed. |
| 132 | S&F 200mm extruded aluminum alloy handles, fabricatedtype, anodisedcomplete all as specified and as directed. |
| 133 | S&F 200mm extruded aluminum alloy handles, fabricatedtype, anodised including taking down existing one complete all as specified and as directed. |
| 134 | Supply and Fixing 30 mm thick factory made flush shutter solid core construction with block board core and plywood face panels, comercial type on both faces complete all as specified and directed. |
| 135 | S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4mm complete including taking down existing one all as specified and directed. |
| 136 | S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4mm complete all as specified and directed. |
| 137 | Supply and fixing 100mm long Butt hinges medium weight cold rolledstainless steel, and fixed complete all as specified and as directed. |
| 138 | Supply and fixing 100mm long Butt hinges medium weight cold rolledstainless steel, fixed in repair to wooden frame/welded to metal frame complete all as specified and directed. |
| 139 | S&F Butt hinges 75 mm long medium weight cold rolled stainless steel complete all as specified and as directed. |
| 140 | Supply and fixing in repairs butt hinges 75 mm long medium weight cold rolled stainless steel complete all as specified and as directed. |
| 141 | S&F Factory made 30mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a);all as specified and directed. |
| 142 | M & L Preparation of new wooden surface of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed |
| 143 | Note for item No 142 :-(a) All synthetic enamel paint, shall be of 1st quality manufactured by the standard firms of make as specified. |
| 144 | (b) The contractor shall inform the GE, within three weeks of the acceptance of the tender, the brand/names of the manufacturers of paint proposed to be used in the works and submit samples thereof and obtain prior written approval of GE before their use in works. |
| 145 | (c) The contractor shall when so required by the GE, produce certificate from the manufacturer or their representative to establish that the brands of paints purchased by the contractor from them, satisfy the requirements of the relevant Indian Standards. Tint of paint, will be approved by the GE. |
| 146 | (d)Paints shall be obtained direct from approved manufacturer or from their authorized agents only of respective brands mentioned below and brought to site in sealed containers. The paint so procured shall be of first quality of any approved make as per list of makes specified. i. Berger Paints (Luxol), ii. Jenson & Nicholson (Brolac), iii. Shalimar Paints(Superlac), iv. Goodlass Nerolac (Nerolac), v. Asian Paints(Apcolite) |
| 147 | (e )Unless otherwise specified the tints of paint shall be as approved by the GE |
| 148 | (f) The contractor shall submit samples of the paints proposed for the work along with results of tests conducted in approved laboratory as directed by the Engineer-in-Charge for approval. |
| 149 | (g) The surface shall be thoroughly cleaned and dusted. All dirt scales oil and grease shall be thoroughly removed before painting is started. The prepared surface shall be inspected and approved by the GE before painting is commenced. The weather shall not be foggy/rainy, dusty or windy. The suitability of the weather will be determined by the Engineer-in-Charge. |
| 150 | (h) No hair marks from the brushor clogging of paint buddles shall be left on the work. Surface shall ordinarily not be painted until it has dried up completely. Trial patches of paint shall be laid at intervals to check if drying is satisfactory. |
| 151 | S & F Aluminum handles cast type anodised 150 mm long complete all as specified and as directed. |
| 152 | Supply and fixing in repairs aluminum handles cast type anodised 150 mm long complete all as specified and as directed. |
| 153 | S&F300mm, ordinary Mild steel rat tail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 154 | S&F in repairs 300mm, ordinary Mild steel rat tail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 155 | S&F 250mm long Aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast- aluminum alloy and fixed complete all as specified and as directed. |
| 156 | Supply and Fixing in repairs 250mm Aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast- aluminum alloy and fixed complete all as specified and as directed. |
| 157 | Taking down of aluminum/Glass doors carefully and re-fixing in same opening including necessary repairing/cleaning/greasing etc and make the same fully functional all as specified and directed. |
| 158 | Taking down the existing locking system, contains any number of levers replacing the strucked/damaged levers, applying oil to all parts and making functional properly and refixed in position complete all as specifed and as directed |
| 159 | S&F 25mm dia mild steel powder coated drapery rod out to length required without joint in between and fixed at openings including taking existing one complete as directedby Engr-in-charge. |
| 160 | S&F Mild steel powder coatedbrackets for holding the drapery rod and fixed to wall with MS screw including taking down existing one complete as directedby Engr-in-charge. |
| 161 | Supply and Fixing in repairs Mild steel powder coated fancy type brackets fixed at both the end of drapery rod of same colour and type of drapery rod as directed. |
| 162 | M&L in repairsDoom grating 125mm dia with waste hole of PTMT(minimum weight 40gms) Including taking down existing one complete all as specified and as directed by Engneer-in-Charge. |
| 163 | M&L Taking down & re fixing high or low level flushing cistren 10 ltrs capacity & connections to pipes & fixing of chain & pull or lever after cleaning inside of all dirt, scale formation, replacement of rubber washers, stopping of leakage etc complete all as specified and as directed |
| 164 | M&L PVC connection 15 mm size with PTMT nuts of length 450 mmincluding taking existing one complete as directedby Engr-in-charge. |
| 165 | M&L WHB, vitereous china (flate back or angle back type) ofsize 550x400mm including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe Complete including taken down existing one all as specified . |
| 166 | M&L 32 mm low density polyethylene (LDPE) pipes of pressure rating 6kgf/sqcm for WHB Including taken down existing one complete all as specified and as directed by Engineer-in-Charge |
| 167 | M&L Bib Cock with wall flange screwed down screwed for iron pipe 15mm bore CAT Part No QT F2006151, HT F3001151 of CERA orequivalent to Parryware/Hindware including taking existing one complete as directedby Engr-in-charge. |
| 168 | M&L Angular stop cock, valves high pressure screwed both ends iron pipe or for unioins 15mm dia, CAT Part No QT F2006202, HT F3001202 of CERA or equivalent to Hindware/Parryware including taking down existing one complete as directedby Engr-in-charge. |
| 169 | M&L Pillar taps 15mm bore CP with capstan head screwed down high pressure screwed for iron pipe Cat Part No QT F2006101, HT F3001101 of CERA orequivalent to /Parryware/Hindware including taking down existing one complete as directedby Engr-in-charge. |
| 170 | M&L in repairs Chromium plated wall mixer with provision for over head shower with 115mm long bend pipe on upper side connecting legs and wall flanges complete all as specified and directed. Make:- QT F2006401, HT F3001401 of CERA orequivalent in Parryware /Hindware / ESS-ESS all as specified and as directed. |
| 171 | S&F in repair CP Soap dish CAT Part No- F5003106 of CERAor equivalent make of Parriware /Hindware all as specified and as directed. |
| 172 | S&Fin repair Towel rail 24\" long for wash basinMake: (Make : CAT Part No- F5007103 of CERA series or equivalent make of hindware / parriware all as specified and as directed. |
| 173 | S&F Plastic water closet seat for EWC with flat bottom and cover and mild steel chromium plated or alluminised hinging device fixing Including taking down existing one complete all as specified and as directed by Engineer-in-Charge. |
| 174 | S&F CP 2 way bib cock with wall flange fancy type screwed down screwedfor iron pipe in repairs 15mm bore CAT Part No-QT F2006163, HT 3001163 of CERAor equivalent in Parryware ,or as per list of makes Including taking down existing one complete all as specified and as directed by Engineer-in-Charge |
| 175 | S&F CP Hand shower (Health Faucet) with 1M Flexible Tube with 8mm bore wall Hook with N.R.V (Back Flow Preventor)F8030108AB of CERA equivalent in ESSCO/ Kohler as per list of makesIncluding taking down existing one complete all as specified and as directed by Engineer-in-Charge |
| 176 | M&L Vitreous Ware wash down water closet (Pedestal), white (EWC) Plastic seat of same colour of WC, closed pattern with flat bottom, and cover and Mild steel chromium plated hinging device including taking down the existing fitting completeall as specified and directed. |
| 177 | S&F PVC Dual flush ceramic colour, low level, 10 litres capacity, star white with inlet float ball valve, PVC flush pipeand handle, making proper fixing and hanging arrangementsIncluding taking down existing one complete all as specified and as directed by Engineer-in-Charge Cat Part No 21029 ofhindware or equivalent |
| 178 | S&F Wall mounted Shower Arms 190mm long flat shapefor wall mounted shower with flange including taking down complete all as specified and directed (Make :CAT Part No-SHA-483of Jaguar or equivalent make of parriware /hindware.. |
| 179 | S&F in repairs Overhead Shower ø120mm Round Shape Single Flow (ABS Body Chrome Plated with Gray Face Plate) with Rubit Cleaning System complete all as specified and as directed.(Make :CAT Part No- OSH-1709 of Jaguar or equivalent make of parriware /hindware.. |
| 180 | S&F in repairs Vitreous china squatting pan \"Orissa\" Pattern size 580x440mm white with integral foot rests (excluding flushing cistern and flush pipe )ncluding connection to trap,and to flushing pipe, anti-syphonage pipe,etc. complete including making good to floor including provision of lime concrete bedding all as specified and as directed. |
| 181 | S&F PVC (SWR) P trap 110 mm bore Including taking down existing one complete all as specified and as directed by Engineer-in-Charge |
| 182 | S&F PVC (SWR) S trap 110mm bore Including taking down existing one complete all as specified and as directed by Engineer-in-Charge |
| 183 | M&L 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ringjoints fixed to wallincuding taking down existingcomplete all as specified and as directed. |
| 184 | S&F PVC (SWR) 75mm borejunction single (single T) equal or unequal provided with access doorincluding taking down existing one complete all as specified and as directed by Engineer-in-Charge |
| 185 | S&F PVC (SWR) branch piece single (single Y)75mm bore equal or unequal provided with access doorincluding taking down existing one complete all as specified and as directed by Engineer-in-Charge |
| 186 | S&F PVC bends 75mm boreincluding taking down existing one complete all as specified and as directed by Engineer-in-Charge |
| 187 | S&F PVC (SWR) 75mm bore junction vent cowlincluding taking down existing one complete all as specified and as directed by Engineer-in-Charge |
| 188 | M&L 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ringjoints fixed to wallincuding taking down existingcomplete all as specified and as directed. |
| 189 | M&L PVC bends 110mm boreincluding taking down existing one complete all as specified and as directed. |
| 190 | M&L PVC (SWR) 110mm junction (single T) equal or unequal provided with access door including taking down existing one complete all as specified and as directed. |
| 191 | M&L PVC (SWR) 110mm junction vent cowl all as specifedincluding taking down existing one complete all as specified and as directed. |
| 192 | M&L in repairs Stack clamps made out of 50 mm x 5 mm flat iron and 75 mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or rooffor 75 mm bore complete all as specified and directed. |
| 193 | M&L in repairs Stack clamps made out of 50 mm x 5 mm flat iron and 110 mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or rooffor 110 mm bore complete all as specified and directed. |
| 194 | S&F 600 x 450 mm bevelled edge mirror fixed with 04 Nos Stainless steel studsincluding taking down existing onecomplete all as specified and as directed. |
| 195 | M&L Glazed ceramic coloured tiles 450 x 300 mm x 7/8 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match with tiles on vertical surface such as dadoincluding 10mm thick 1:3 backingcoat including taking down existing tile and removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 196 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises andJoint free Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile of sizeexc 0.09 Sqm but n exc 0.18 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incuding screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement mortar (1:4) complete all as directed. |
| 197 | Note for item No 196 & 197 :- The manufacturer\"s test certificate of Tilesmust be submitted for approval by the concerned authority prior to installation. |
| 198 | Treatment of the sunken floor slab comprises of the following specification and all as specified. Make :-Dr Fixit/ M/s Sika india Pvt Ltd/ STP Ltd/ M/s Fosroc Chemicals |
| 199 | (a) Demolition of cement concrete filling of any description in sunken portion in toilet and removing debris outside MD land. |
| 200 | (b) Cleaning the sunken/ lowered portion of RCC slab surfaces (including vertical total depth plus skirting height) of floors by wire brush, chisel out any mortar sticking to the surface and brooming completely. 40mm thick avg PCC 1:2:4 type B-0 using 12.5mm graded aggregate as in padding conc to achieve proper sploe including cutting holes in bricks or RCC wall for spout |
| 201 | (c) Rendering of uneven surfaces with 10mm thick CM 1:4 mixed with integral water proofing compound @ 3% by wt of cement consumed. Fill it with water and check dampness and seepage. Where dampness/ seepage is noticed, nozzles shall be fixed and grouting carried out.(Quoted rate shall be deemed to be inclusive for WPC ) |
| 202 | (d)All junctions points of side wall where CI/ GI pipes are passing through shall be sealed with epoxy putty. |
| 203 | (e)After drying putty, wash the slab and sides of sunken portion with water and make it clear and clean. |
| 204 | (f) M&L for applying two coats of polymer modified cementious water proof coating as per manufactures instruction to bottom and vertical sides up to finished floor level+100mm height. The thickness of two layer shall be 1mm. When the second layer is still sticky, coarse sand spray shall be carried for the vertical and bottom surface of the sunken portion all as specified and directed |
| 205 | (g)Plaster the bottom and sides up to bottom of the skirting with minimum 20mm thick CM 1:4 mixed with integral water proofing compound 3% by wt of cement consumed as per manufacturers specification including rounding of corners and junctions sloping towards spout.(Quoted rate shall be deemed to be inclusive for WPC ) |
| 206 | (h)PCC 100 mm thick 1:5:10 type E2, using 40mm graded stone aggregate complete all as specified |
| 207 | (j) PCC 40 mm thick 1:2:4 type B-0 using 12.5 mm graded stone aggregatecomplete all as specified |
| 208 | Note for item No 199 to 207 :- Test the water proofed area (ponding test) by filling water for at least 72 hours and tested for leakage, seepage and to the entire satisfaction of GE. Test shall be done in presence of reps of Engineer-in-Charge and record for each sunken slab shall be maintained. The treatment shall be carried out by authorised applicators of chemicals. Cost of testing is include in the rates quoted above. |
| 209 | Repair of leakage/seepage from the Nahani trap/ floor trap of kitchen/ bathroom/ washbasin of the upper Qtr, in any position at any height, complete including change of floor trap, PVC horinzontal pipe embeded in floor in bathroom or kitchen making good to the damage portion of flooring, laying and matching of tiles in the existing flooring, complete all as specified and directed by Engineer-in-Charge. |
| 210 | Repair of leakage/seepage from the wall/ door bend /door tee/\"Y\" junction/ \"T\" Junction of soil pipe / waste pipe/ vent pipe of kitchen/ bathroom/WC of the upper Qtr or at the ground floor Qtr including change of any damage soil waste pipes or fittings of any shape, specification and size, making good to the damage portion of wall with brick work in cement mortar 1:6 or cement concrete 1:2:4 and plastering to wall in CM 1:4 and matching to existing wall complete to avoid the leakage/ seepage at the site of work as directed and specifie by the Engineer -in- charge |
| 211 | Note for item No 209 & 210 :- (a)Find out main cause of leakage and take necessary steps to resolve / rectify.(b)Replace existing tiles in case leakage through NT/FT.(c)The rate also include provision of new NT/FT.(d)The unit rate is also deemed to be included for reqd bonding chemicals to arrest the leakage/seepage as direct by the manufacturer specification. Make : M/s Sika Chemical, M/s Pidilite, M/s Dr Fixit |
| 212 | M&L Glass shelf assembly including taking existing one complete as directedby Engr-in-charge.(Make :CAT Part No-ACN-1173 continentalof Jaguar series or equivalent make of Parriware /Hindware all as specified and as directed. |
| 213 | M&L Towel Ring round including taking existing one complete as directedby Engr-in-charge.Make: (Make : CAT Part No-ACN-1121BN of Jaguar series or equivalent make of hindware / parriware all as specified and as directed. |
| 214 | S&F PVC body cabinet mirror of size 500 X 400 MM of approved design and pattern Including taking down existing one complete all as specified and as directed by Engineer-in-Charge . (Make: Cat Part No 556 of Prayag or its equivelent in ESSCO/ Kohler as approved by GE |
| 215 | M & L Complete removal of existing treatment of any type/description such as distempering work, internal emulsion etc from internal surfaces of walls & ceiling with mechanical means/ grinder,then applying wall care putty on internal surfaces of walls/ceilings as required for desired smoothness and levelling of surfaces by using ready made wall care putty including sand papering and after filling the putty apply two coats ofplastic emulsion over a coat of primer complete all specificed and as directed. |
| 216 | M&L Preparation of old decorated surfaces of wallsby using pressure washer, remove existing colour/treatment and dirt, dust etc ,applying one coat of wall care putty and then apply two coat ofoil bound distemper of required shade over one complete all as specified and as directed by Engineer - in -Charge. |
| 217 | M&L Preparation of old decoratedplastered or unplastered surfaceof wall, brooming down or steel wire brushing down smoke soot, moulds, mass, efflorescent , treading, oil, greasy spots including removal of existing colour/treatment, dirt, dust etc and applying two coats oil bound distemper complete all as specified and as directed. |
| 218 | Supply and fixing in repairs factory made UPVC white colour Three track three panelssliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead /double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of UPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to UPVC profile), appropriate dimension of UPVC extruded glazing beads and UPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For UPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 219 | Supply and fixing in repairs factory made UPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles dulyreinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to UPVC profile), UPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc.Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid separately).Note: For UPVC frame, sash and mullion extruded profiles minus 5% tolerance inimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 220 | M&L Preparation of new plastered surfaces wall/ ceiling and applying two coat of white wasing on ceiling/ walls surfaces complete all as specified and directed. |
| 221 | M&L Preparation of new plastered surfaces wallapplying two coat of OBD over a coat of alkali resistant priming paint complete all as specified and directed. |
| 222 | S & F Powder coatedaluminium frame for doors, windows, ventilators with one or more rebates including joining cleat etc.including taking down existing one complete all as specified and directed. Note: Minimum thickness of powder coating 50 micron. |
| 223 | S & F Powder coated aluminium door shutters,aluminium section weighing 0.55kg/m including necessary joining cleats,glazing clips, rubber neoprene packing, handles 2 Nos in each doors, hinges anodised aluminium snap beading screws etcincluding taking down existing one completeall as specified and directed.Note:-Glazing and particle board work shall be measured and paid seperately. |
| 224 | S & F 9mm thick prelaminated particle board, interior grade, prelaminated both sides with decorative choice lamination fixedwith screws to aluminium frame including taking down existing one complete all as specified and as directed. |
| 225 | S & F Coloured tinted float glass and glazing, 5.5 mm thick with oil putty in squares not exceeding 0.5 Sq.m in each pane, with glazing clips and oil putty,including taking down existing one complete all as specified and directed. |
| 226 | S & F Mortice lock brass 4 levers vertical type of size 100mm fixed asincluding taking down existing one all as specified and directed. |
| 227 | S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel covert governing pivot made of brass, other parts made of mild steel heavy duty including taking down existing wire cloth all as specified and directed. |
| 228 | S&F Aluminium extrudedsection body door closer hydraulically regulated,designation No.3, universal type, suitable for door shutters of 851 to1000 mm in width and of weight between 61 to 80 kg and fixed including taking existing one complete as directedby Engr-in-charge. |
| 229 | M & L Cutting holes in stone wall exc half brick and n.exc one brick in cement mortar for inserting hold fasts/lugs and making good dismantled portion in cement mortar 1:3 or 1:2:4 type B-1 concrete as required complete all as specified and as directed. |
| 230 | Taking down shutters of any description n.exc 1.0 sqm each, and refixing in same opening complete all as specified and directed. |
| 231 | Taking down shutters of any description exc 1.0 sqm but not exc 2.0 sqm each, and refixing in same opening complete all as specified and directed. |
| 232 | M&L PVC (SWR) floor trap 75mm dia of outlet pipe, plain with grating including jointing with solvent cement including taking down existing damaged one complete all as specified and as directed. |
| 233 | S&F 32 mm Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed including taking down existing one complete all as manufactures and all as specified and directed by Engineer- In - charge |
| 234 | S&F 18/19mm thick Prelaminated particle board, interior Grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber frame work complete including taken down existing one complete all as specified and as directed by Engineer-in-Charge |
| 235 | S&F Brass 4 levercupboards locks grade I size 65 mm complete all as specified and as directed by Engineer-in-Charge |
| 236 | S&F Brass 4 levercupboards locks grade I size 65 mm complete including taken down existing one complete all as specified and as directed by Engineer-in-Charge |
| 237 | S&F Stainless steel cutlery basket of size 530 x 505 x 100 mm Including taking down the existing one complete Make : Butterfly or equivalent make as per list of makes in PS) |
| 238 | S&F Stainless steel handles of size 150 mm of approved pattern and make suitable for Base/Wall unit of modular kitchen Including taking down the existing one complete (Make : Spykar or equivalent make as per list of makes in PS) |
| 239 | S&F Stainless steel spring hinges of size of approved pattern and make suitable for base/wall unit of modular kitchen Including taking down the existing one complete (Make : BIR SS or equivalent make as per list of makes in PS) |
| 240 | S&F Stainless steel plain basket of size 530 x 505 x 100mm Including taking down the existing one complete. Make : Butterfly or equivalent make as per list of makes in PS |
| 241 | S&F Stainless steel bottle basket of size 200x 508x 431mm B35e. Make : Butterfly or equivalent make as per list of makes in PS |
| 242 | S&F Stainless steel thali basket of size 600x 500x 100mm Including taking down the existing one complete Make : Butterfly or equivalent make as per list of makes in PS) |
| 243 | S&F Magnetic catches with 8mm dia steel ball and brass body and striking plate including letting in repairs complete all as specified and directed. |
| 244 | S&F Stainless steel telescopic slider of 500 mm of approved pattern and make suitable fordrawer in base unit of modular kitchen including taking down the existing one complete all as specified and directed. |
| 245 | S&F Brass continuous(Piano)hinge 30mm width of flap, bright finish of electrolyte complete all as specified and as directed by Engneer-in-Charge |
| 246 | S&F Brass continuous(Piano)hinge 30mm width of flap, bright finish of electrolyte Including taking down existing one complete all as specified and as directed by Engneer-in-Charge |
| 247 | S & F 4mm thick plain sheet glass Extra over sheet glass, ordinary quality, if sheet glass is ground or obscured or frosted, on one sideand glazed with oil putty or fixed with fillets 2nd class hard wood/steel/aluminium of sectional area glass not exc 0.5 sqm each pane complete all as specified and directed. |
| 248 | Taking down hood covers ofrolling shutters loose brackets plates or guide for proper greasing of helical spring, shafts and guide channel for proper functioning of rolling shutter of the following size and refixing covers in position after repairs complete :- |
| 249 | Shutter of size upto 10 Sqm area |
| 250 | All as per item No 248 but Shutter of size exc 10 Sqm but n.exc 15 Sqm |
| 251 | All as per item No 248 but Shutter with gear box assembly of size exc 3 Sqm by n.exc 15 Sqm |
| 252 | Taking down rolling shutter any type including top covers for carrying out repairs/replacement of worn out parts such as brackets guide shafting pulleys, gear wheels gear boxes and straightning partition side parts press button rails, tightening end clips, cleaning and greasing the parts to in good condition and refixing of the following sizes :- Note :- (i) Spare parts if any, required for replacement shall be measured and paid separately under supply only items herein after. (ii)The rate quoted shall be deemed to inclusive for fixing of spare parts replaced. |
| 253 | Shutter area n.exc 10 Sqm |
| 254 | All as per item No 252 but Shutter area exc 10 Sqm but n.exc 15 Sqm |
| 255 | All as per item No 252 but Shutter area exc 15 Sqm |
| 256 | Supply only Heavy duty spring upto 35 cm long |
| 257 | Supply only Heavy duty spring 35 to 45 CM long |
| 258 | Supply only Gear box set |
| 259 | Supply only Gear wheel (steel/CI) |
| 260 | Supply only Gear arm |
| 261 | Supply only Shaft wheel with bearing |
| 262 | Supply only Gear box handle |
| 263 | Supply only Press bottom rail |
| 264 | Supply only Side guide ( 12 guage) |
| 265 | Supply only 25 mm dia & 150 mm long shaft with 25 mm inner dia bearing (2 Nos) for steel sliding door |
| 266 | Supply only End clips |
| 267 | Supply only Safety lever lock MS |
| 268 | Supply only Partition patties 75 mm wide (mild steel strip) |
| 269 | Supply only Heavy shafting pipe mild steel of 40 mm dia |
| 270 | Supply only Heavy shafting pipe mild steel of 50 mm dia |
| 271 | Supply only Top Cover (18 gauge) |
AI Tender Summary
Tender Timeline
Apr 17, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedMay 15, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMay 16, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender