|
| 1 | Clearing Grass and Removal of Rubbish up to a distance of 50 meters outside the periphery of the area as per technical clause 201 of MORT&H specifications |
| 2 | Excavation in Soil (any type) using Hydraulic Excavator CK 90 with hydraulic excavator of 0.9 cum bucket capacity including cutting, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, including all lifts and combined lead upto 30m. |
| 3 | Providing and laying Filter material underneath pitching in slopes complete as per drawing and Technical specification Includes Mazdoor required for trimming of slope to proper profile and preparation of bed. |
| 4 | Providing and laying Pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and Technical specifications |
| 5 | Cement concrete 1:2:4 with stone balast and shingle mixing by mechanical means using concrete mixer volumetric type |
| 6 | Grouting stone filling or pitching:- With mortar. |
| 7 | Providing and erecting a \"W\" metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete as per clause 810 |
| 8 | Paintng two or more coats with synthetic enamel paints in all shades on old wood work or metallic or plastered or concrete surface to give an even shade including rubbing down old paint. |
| 9 | Reinforced cement concrete M-25 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth |
| 10 | Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete |
| 11 | Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering) |
| 12 | Providing, laying and fixing in position perforated PVC 150 mm dia pipes of length 450 mm with ribs with Geotextile 200 gsm at inner face for drainage, conforming to IS:12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per drawing and satisfaction of Engineer-in-charge. |
