Public Health Engineering Department-PHED has published Tender For Construction Of Sump Cum Pump House Atstage I And Ii For W.S. Scheme Sangri Muqam Under Jjm. Submission Date for this Tender is 26-04-2023. Sump Tenders in sopore Jammu And Kashmir. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mannual means over areas (exceeding 30cm and upto 1.5m in depth and width as well as 10 Sqm in Plan) including disposal of excavated earth upto 1m cutting edge, disposed earth to be levelled and neatly dressed in all kinds of soil. |
| 2 | Earth work in excavation by mechanical means over areas (exceeding 30cm and up[to 1.5mtr in depth, 1.5mtr in width as well as 10 sqm on plan) including disposal of excavated earth upto 50m from cutting edge disposal earth to be levelled and neatly dressed .All kinds of soil |
| 3 | Extra for earthwork in excavation beyond 1.5m |
| 4 | Providing and laying of dry Stone soling in horizontal on level. |
| 5 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering.1:4:8 (1 cement : 4 coarse sand : 8 graded stone agg. 40 mm nominal size Crushed |
| 6 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 7 | Reinforced cement concrete work in walls (any thickness) including attached pilasters,buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts andstruts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement.1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 8 | Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-incharge. All works uptoplinth level . |
| 9 | Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-incharge. All works aboveplinth level . |
| 10 | Centering and shuttering including strutting, propping etc. and removal of form for: Foundations |
| 11 | Centering and shuttering including strutting, propping etc. and removal of form for: walls (any thickness) including attached pilasters buttresses, plinth and string course fillets, kerbs and steps etc. |
| 12 | Centring and shuttering including strutting, propping etc, and removal of form work for Suspended floors, roofs, landings, balconies and access plat forms. |
| 13 | Centering and shuttering including strutting, propping etc. and removal of form for: Lintel , beams & cantilevers etc |
| 14 | Centering and shuttering including strutting, propping etc. and removal of form for: Spiral Stair, landings |
| 15 | Extra for shuttering in circular work for Foundations, footings, bases for columns |
| 16 | Extra for shuttering in circular work for Walls |
| 17 | Extra for shuttering in circular work for lintels, beams & cantilevers |
| 18 | Extra for shuttering in circular work for Spiral stair, landing |
| 19 | Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm) |
| 20 | Applying priming coat:With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 21 | Distempering with oil bond washable distemper of approved brand and manufacture to give an even shade. New worl one or more coats |
| 22 | Providing hoisting and fixing trusses/purlins /rafters/posts/ post-plates or like components including cost of screws etc. complete First class Budloo/Fir wood |
| 23 | Providing corrugated G.S sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.50mm thick with zinc coating not less than 275gm/m2 |
| 24 | Reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete (T.M.T bars) |
| 25 | Providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer’s specification. (1 kg of water proofing material in 50 kg of cement) |
| 26 | Brick work in FPS bricksof class designation 75 in foundation and plinth in cement mortor 1:4 mix |
| 27 | Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level |
| 28 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge, Using First class kail wood 35mm Thick. |
| 29 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately) 2nd Class Kail Wood |
| 30 | Providing and fixing panelling or panelling and glazing in panelled or paneled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40mm thick. for Door |
| 31 | Providing and fixing panelling or panelling and glazing in panelled or paneled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40mm thick. for Glass panes 4mm thick for exterior window shutters |
| 32 | c)Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia wire and 1.4 mm wide aperture with matching wood beading |
| 33 | Extra For Plastering on circular work one coat. |
| 34 | Applying priming coat with ready mixed red oxide zinc chromate primer of approved brandand manufacture on steel galvanised iron/ steel work |
| 35 | Painting with synthetic enamel paint of approved brandand manufacture on steel galvanised iron/ steel work |
| 36 | Supplying and fixing rolling shutters of approved make, made of required size M.S laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete including the cost of providing and fixing necessary 27.50cm long wire springs manufacture from high tensile steel wire of adequate strength confirming to IS 4454 part 1 and M.S top cover of required thickness for rolling shutters. 80x1.25mm M.S laths with 1.25mm thick top cover |
| 37 | Providing and fixing ball bearing for rolling shutters |
| 38 | Providing and fixing aluminium handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc complete 125 mm |
| 39 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m |
| 40 | Carriage of material by mechanical transport from source to actual site of work for: Cement & Steel Avg lead 5 Km |
| 41 | Carriage of material by mechanical transport from source to actual site of work for: Sandfor average lead of 20Km |
| 42 | Carriage of material by mechanical transport from source to actual site of work for: 40mm aggegrate for average lead of 20 Km |
| 43 | Carriage of material by mechanical transport from source to actual site of work for:Stone Soling for 12 Km |
| 44 | Carriage of material by mechanical transport from source to actual site of work for: Bricks for average 80 Km |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
