Tender For Special Repair To Road From Cariyappa Dwar Towars Hq Grc Under Ge Kamptee, kamptee-Maharashtra

Special Repair To Road From Cariyappa Dwar Towars Hq Grc Under Ge Kamptee. 1 Repairs To Pot Holes Any Depth, Not Exceeding 1 Sqm Each Including Sweeping Free From Dust With Mechanical Equipment And Mud Or Water, Scoring Sunken Surfaces In Roads, Paths Etc By Using Pressure Air , Cutting Around Edges To Atleast 25Mm In Depth, Making Good By Applying Tack Coat At 5 Kg Per 10 Sqm, Putting In Premixed Bituminous Macadam, Well Rammed And Sealed With Binder 9.8 Kg Per 10 Sqm Blinded With 0.09 Cum Of Stone Chippings 6.3Mm Size And Again Well Rammed ( Including Supply Of Premixed Bituminous Macadam, Binder And Chippings ) , Depth Of Pot Holes Exc 30Mm Complete All As Specified And As Directed. 2 Material & Labour For Preparation Of Unsurfaced Water Bound Macadam Surfaces By Brushing With Wire Brushes For Removing Caked Mud, Sweeping With Brooms And Finally Fanning The Cleaned Surface With Gunny Bagsto Remove Loose Dirt Etc. Complete And Applying Evenly A Priming / Tack Coat With Bituminous Primer Using Paving Bitumen @ 5 Kg Per 10 Sqm Using Paving Bitumen Grade Vg-30 On Blacktop Surface Usingmechanical Sprayer Complete All As Specified And As Directed. 3 Material & Labour For Premixed Asphaltic Semi Dense Concrete 30 Mm Consolidated Thickness By Using 5.5% Binder Content ( Minimum ) By Weight Of Total Mix And 2 % Cement Filler, Rolled And Compacted To Required Camber And Gradient Using 8 To 10 Tonne Power Roller Complete All As Specified And As Directed. Note: The Work Shall Be Executed By Using Hot Mix Plant And Mechanical Paver. 4 Material And Labour For Premixed Bituminous Macadam ( Consolidated Thickness 75Mm Or Less ) Using With 4% Binder Content ( Paving Bitumen Any Penetration Of Grade Vg-30 ) By Weight Of Total Mix And 1.5 % Cement Filler, Mixed In Hot Mixed Plant And Laid By Using Mechanical Paver And Rolled And Compacted To Required Gradient And Camber Using 8 To 12 Tonne Power Roller Complete All As Specified And As Directed. 5 Material & Labour For Preparation Of Road Surface And Applying Thermoplastic Reflective Paint In Marking Of Minimum 2.5 Mm Thick Single Coat As In Center Line And Edge Line Road Marking Of 150 / 100 Mm Width Using Hot Mark Thermolastic Modern Propelled Road Marking Machine As Directed Including All Ingredients Such As Binder, Glass Beads Titanium Dioxide Calcium Carbonate Inter Fillers Thermoplastic Requirement For Glass Beads Shall Be The Table No. 800.4 Of Morth Specification Including Spraying Of Glass Beads Etc., All As Per ManufactureS InstructionS And As Directedby Engineer-In-Charge. 6 Surface Dressing Not Exceeding 15Cm Deep And Averaging Upto 100Mmgetting Out In Soft / Loose Soil For Road Side Berms To Required Gradient, Complete All As Specified And As Directed. 7 Removal Of Excavated Soil Not Exceeding 50M And Depositing Where Directed At A Level Not Exceeding 1.5 M Above The Starting Point, Complete All As Specifiedand Directed. 8 Demolition Of Cement Concrete In Ground Floor And Pavings Not Exceeding 15 Cm Thick ( Below Or Above Ground Level ) , Complete All As Specified And As Directed. 9 Material & Labour For Crushed Stone Dust Filling Under Floorings / Pavment Spread And Levelled In Layers N.Exc 1.5 M Above The Starting Point , Complete All As Specified And Directed. 10 Material & Labour For Machine Pressed Pre-Cast Concrete Interlocking Tiles ( Paver Block ) Any Shape, Colour And Size Confirming To Is-15658-2006 Of 60 Mm Thick By Using M-35 Grade Concrete With Grey Cement And Pigment, Complete All As Specified And As Directed 11 Material And Labour For Chequered Cement Concrete Tiles30 Cm X 30 Cm X 25Mm Thick Set, Laid Over And Including 20Mm Thick Screed Bed Or Bedding Layer In Cm 1:6 Jointed And Pointed In Neat Cement Slurry With Grey Cement And No Pigment In Floors, Complete All As Specified And As Directed. 12 Material And Labour For Hardcore Of Broken Stone Or Boulders Of Gauge N Exc 63Mm, Deposited, Spread And Levelled In Layers N. Exc 15Cm Thick, Watered And Rammed To A True Surface, Complete All As Specifiedand As Directed 13 Material And Labour For 100 Mm Thick Cement Concrete 1:4:8 Type D-2 ( Using 40Mm Graded Stone Aggregates ) As In Sub Base To Floors Finished Rough To Received Top Layers, Complete All As Specified And As Directed 14 Material And Labour For Cement Concrete 1 : 2 : 4 Type B-1 ( Using 20 Mm Graded Stone Aggregate ) , As In Floor, Concrete Surface Finished Even And Smooth Without Using Extra Cement, Complete All As Specified And As Directed. 15 Material And Labour Precast Stone Kerb Of Rubber Moulded Coloured Glossy Finished Precast Cement Concrete ( 1:2:4 ) Type , B-1 ( Using 20 Mm Graded Stone Aggregate ) Block Of Size 30 Cm Wide & 15 Cm Thick Finished At Top Bull Nosed Shape And Finished Surface Even And Smooth Using Coloured Pigment And Jointed In Cm 1:6 Struck Finished, Complete All As Specified And As Directed. 16 Material And Labour For Preparation Of New Or Previously Untreated Surfaces Of Any Description Over 10 Cm Girth Or Width, Not Otherwise Described And Applying Two Coats Of Luminous Paint Over A Coat Of Primer ( Zebra Pattern ) On Concrete Surfaces, Complete All As Specified And As Directed.Make: All As Specified In Particular Specification. 17 Material & Labour For Spreading In Road Berms 100Mm Spread Thickness For Light Wearing Surface With Moorum / Red Bajri, Spread, Rolled, Consolidated To Gradient And Camber Required , Complete All As Specified And Directed. 18 Supply And Fix 1000 Mm Diaconvex Mirror Made Of Pc Material Providedofsize 50 Mm Dia, Ms Pipe 2Mm Thickness , Two Post Duly Powder Coated For Road Turning, Intersections, Curves, T- Junctions, Parking Lots Etc. And Also Held Ideal For Surviliance , It Should Have Clear Definite Mirror Image Having 130 Degree Of Viewing Angle. It Is Unbreakable And Stronger Than Glass, Complete All As Specified And Directed.Note: The Following Are Demmed To Be Included In The Rate Quoted:I ) Pcc Bed Block In Cc 1:2:4 Type B-1 For Embedding Ms Pipeof Size 50X30x25 Cm.Ii ) Necessary Earth Work In Any Type Of Soil Iii ) Applying Two Coats Of Aliminium Paint Over A Coat Of Primer On Ms Pipe / Other Clamps Etc Make:- Dark Eye / 3M / Greens And Greenlite. 19 Supply And Fixing Solar Road Delinator 6 LedS Of Colour Red / Yellow Housed In Plastic Body, Led;S Solar Cells, Battery And Light Sensor Well Protected Inside, Polycarbonate Sheet , Device Protected With Powder Coated Wire Mesh, Cage System Mounted Over 47Mm Dia Steel Tube Powder Coated Length 600Mm Having Sheet Footfor Firm Grip To Ground, Delinator To Have Additional Reflective Bands, System Workable For 2-3 Days ( Nidhts ) After Full Charge For 8-10 Hours Complete All As Specified And As Directed. Makes: Cat Part No. Gpl-13-01 Of Greenlite Pvt Ltd. Or Equivalent In Dark Eye / 3M / Greensnote: Delinators With Extra Height Can Also Be Made Of Height 750Mm, 900Mm Or 1000Mm 20 Supply And Fix Solar Road Stud Having 3 Leds Of Colours Unbreakable Poly Carbonate Shell & Clear Facings Designated For Maintenance Free Operation 100 % Water Proof Design Confirms To Ip67, Dimension 125 X 125 X 25 Mm With Dual Shank Of 65 Mm High Efficiency Mono- Crystalline Solar Panel 3 V / 120 Ma, One Ni Mh Lsd Rechargeable Battery ( 1.2 V / 800 Ma ) High Temperature, Six Super Bright Leds With 14, 000 Mcd, View Distance Upto 1000M, Flash Rate 2 Hz Or According To Customers Requirements, Bearable Weight 20 Tons, Colour: Red, Amber, Blue, Green And White, Working Time 30 To 40 Hours Successively After The Battery Is Fully Charged. The Electronic Circuit Is Encapsulated With The Battery In The Body Of Solar Stud, A Non-Invasive Switch ( Optional ) To Avoid Battery Drainage During Storage And Transportation, Charging Time: Five To Six Hours / Day, Working Temperature: 40?C - 75?C, Lifetime: Three To Five Years, Easy Installation, No Maintenance, Brightness Sensitive Auto-Switch Automatically Turns On At Night And Turns Off At Dawn, High Visibility LesS Help Ensure Easy And Safe Night Driving, Ideal For Highways, Parking Lots, Roads And Similar Isolated Or Stand-Alone Traffice Applications, Complete As Per Morth / Irc Specifications And Manufacturers Instruction, Complete All As Specified And Directed.Model No. Da 113 Of Make Dark Eyeor Equivalent In3m / Greens / Greenlite Pvt Ltd. 21 Supply And Fixing Plastic Speed Bump Withhighly Durable Black And Yellow , Height 70Mm, Weight 2160 Grms , Material Pe With 7 Years Warranty Complete All As Per Morth / Irc Specification And ManufacturerS Instructions Complete All As Specified And As Directed.Model No. Da-1006 , Design Pattern No. 206431 Of Make Dark Eyeor Equivalent In3m / Greens / Greenlite Pvt Ltd. 22 Supply And Fixing Retro Reflective Boards In Shape Of Rectangle Of Size 1.0M X 1.40 M Made Out Of 2 Mm Thick Stainless Steel Both Side Bounded / Pested With High Prismatic ( Iv ) Sheet As Manufacturedwith Desired Letters / Logos / Designed As Directed. The Board Shall Be Supplied With And Including Stainless Steel Frame Made Out Of 25 Mm Dia Pipe In Frame Around Duly Welded With And Including Stainless Steel Sheet And Stainless Steel Posts Of 38 Mm Dia And Full Length Of 2.20 M One Side And 2.8 M Other Side Complete All As Specified And Directed.Note: Rate For Fixing Of Boards With Pcc 1:2:4 Type B-2 Filling Of Size 45 X 45 X 60 Cm To Be Incl In Unit Rate.Makes: Manufacture Of Sheet Avery Dennison Or 3M 23 Supply And Fixing Aluminium Road Studs , Two Way Reflective, Dimensions 110X128x30 Mm Aluminium Alloy Body, Reflective Panel Amber / Red Or White Weight 530 Complete Aluminium Coated Of Approved Quality Complete All As Specified And As Directed.Model No.Da-971 Of Make Dark Eyeor Equivalent In3m / Greens / Greenlite Pvt Ltd.

Sr No	CorrigendumDate	Corrignedum	CorrigendumType	NewSubmissionDate
1	04-May-2023	Corrigendum_01	BOQ	15-05-2023
2	15-May-2023	Bid Auto Extn Corrigendum	Bid Auto Extn Corrigendum	22-05-2023

INR 1000 /-

INR 107500.0 /-

Refer document

Name of Work: SPECIAL REPAIRS TO ROAD FROM CARIYAPPA DWAR TOWARDS HQ GRC UNDER GE KAMPTEE

Sl. No.	Item Description
1	Repairs to pot holes any depth, not exceeding 1 sqm each including sweeping free from dust with mechanical equipment and mud or water, scoring sunken surfaces in roads, paths etc by using pressure air ,cutting around edges to atleast 25mm in depth, making good by applying tack coat at 5 Kg per 10 Sqm, putting in premixed bituminous macadam, well rammed and sealed with binder 9.8 Kg per 10 Sqm blinded with 0.09 Cum of stone chippings 6.3mm size and again well rammed (including supply of premixed bituminous macadam, binder and chippings), depth of pot holes exc 30mm complete all as specified and as directed.
2	Material & Labour for preparation of unsurfaced water bound macadam surfaces by brushing with wire brushes for removing caked mud, sweeping with brooms and finally fanning the cleaned surface with gunny bagsto remove loose dirt etc. complete and applying evenly a priming/tack coat with bituminous primer using paving bitumen @ 5 kg per 10 Sqm using paving bitumen grade VG-30 on blacktop surface usingmechanical sprayer complete all as specified and as directed.
3	Material & Labour for premixed asphaltic semi dense concrete 30 mm consolidated thickness by using 5.5% binder content (minimum) by weight of total mix and 2 % cement filler, rolled and compacted to required camber and gradient using 8 to 10 tonne power roller complete all as specified and as directed. Note: The work shall be executed by using hot mix plant and mechanical paver.
4	Material and labour for premixed bituminous macadam (consolidated thickness 75mm or less) using with 4% binder content (paving bitumen any penetration of Grade VG-30) by weight of total mix and 1.5 % cement filler, mixed in hot mixed plant and laid by using mechanical paver and rolled and compacted to required gradient and camber using 8 to 12 tonne power roller complete all as specified and as directed.
5	Material & Labour for preparation of road surface and applying thermoplastic reflective paint in marking of minimum 2.5 mm thick single coat as in center line and edge line road marking of 150/100 mm width using "HOT MARK" thermolastic modern propelled road marking machine as directed including all ingredients such as binder, glass beads Titanium dioxide calcium carbonate inter fillers thermoplastic requirement for glass beads shall be the table No. 800.4 of MORTH specification including spraying of glass beads etc., all as per manufacture"s instruction"s and as directedby Engineer-in-Charge.
6	Surface dressing not exceeding 15cm deep and averaging upto 100mmgetting out in soft/loose soil for road side berms to required gradient, complete all as specified and as directed.
7	Removal of excavated soil not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point, complete all as specifiedand directed.
8	Demolition of cement concrete in ground floor and pavings not exceeding 15 cm thick (below or above ground level), complete all as specified and as directed.
9	Material & Labour for crushed stone dust filling under floorings/pavment spread and levelled in layers n.exc 1.5 m above the starting point , complete all as specified and directed.
10	Material & Labour for machine pressed pre-cast concrete interlocking tiles (paver block) any shape, colour and size confirming to IS-15658-2006 of 60 mm thick by using M-35 grade concrete with grey cement and pigment, complete all as specified and as directed
11	Material and labour for chequered cement concrete tiles30 cm x 30 cm x 25mm thick set, laid over and including 20mm thick screed bed or bedding layer in CM 1:6 jointed and pointed in neat cement slurry with grey cement and no pigment in floors, complete all as specified and as directed.
12	Material and labour for hardcore of broken stone or boulders of gauge n exc 63mm, deposited, spread and levelled in layers n. exc 15cm thick, watered and rammed to a true surface, complete all as specifiedand as directed
13	Material and labour for 100 mm thick cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregates) as in sub base to floors finished rough to received top layers, complete all as specified and as directed
14	Material and labour for cement concrete 1 : 2 : 4 Type B-1 (using 20 mm graded stone aggregate), as in floor, concrete surface finished even and smooth without using extra cement, complete all as specified and as directed.
15	Material and labour precast stone kerb of rubber moulded coloured glossy finished precast cement concrete (1:2:4) type ,B-1 (using 20 mm graded stone aggregate) block of size 30 cm wide & 15 cm thick finished at top bull nosed shape and finished surface even and smooth using coloured pigment and jointed in CM 1:6 struck finished, complete all as specified and as directed.
16	Material and labour for preparation of new or previously untreated surfaces of any description over 10 cm girth or width, not otherwise described and applying two coats of luminous paint over a coat of primer (zebra pattern) on concrete surfaces, complete all as specified and as directed. Make: All as specified in particular specification.
17	Material & Labour for spreading in road berms 100mm spread thickness for light wearing surface with moorum/Red Bajri,spread, rolled, consolidated to gradient and camber required , complete all as specified and directed.
18	Supply and fix 1000 mm diaconvex mirror made of PC material providedofsize 50 mm dia,MS pipe 2mm thickness , two post duly powder coated for road turning, intersections, curves, T- junctions, parking lots etc. and also held ideal for surviliance , it should have clear definite mirror image having 130 degree of viewing angle. It is unbreakable and stronger than glass, complete all as specified and directed. Note: The following are demmed to be included in the rate quoted: i)PCC bed block in CC 1:2:4 type B-1 for embedding MS pipe of size 50x30x25 cm. ii) Necessary earth work in any type of soil iii) Applying two coats of aliminium paint over a coat of primer on MS pipe/other clamps etc Make:- DARK EYE/ 3M/ GREENS and GREENLITE.
19	Supply and fixing solar road delinator 6 LED"s of colour red/yellow housed in plastic body, LED;s solar cells, battery and light sensor well protected inside, polycarbonate sheet , device protected with powder coated wire mesh, cage system mounted over 47mm dia steel tube powder coated length 600mm having sheet footfor firm grip to ground,delinator to have additional reflective bands, system workable for 2-3 days (nidhts) after full charge for 8-10 hours complete all as specified and as directed. Makes: CAT PART No. GPL-13-01 of GREENLITE PVT Ltd. or equivalent in DARK EYE/ 3M / GREENS Note: Delinators with extra height can also be made of height 750mm, 900mm or 1000mm
20	Supply and fix solar road stud having 3 LEDs of colours unbreakable poly carbonate shell & clear facings designated for maintenance free operation 100 % water proof design confirms to IP67, Dimension 125 x 125 x 25 mm with dual shank of 65 mm High efficiency mono- crystalline solar panel 3 V/ 120 mA, One Ni Mh LSD rechargeable battery (1.2 V / 800 mA) high temperature, Six super bright LEDs with 14,000 mcd, view distance upto 1000m, Flash rate 2 Hz or according to customers requirements, bearable weight 20 Tons, Colour: Red, Amber, Blue, Green and white, Working time 30 to 40 hours successively after the battery is fully charged. The electronic circuit is encapsulated with the battery in the body of solar stud, a non-invasive switch (optional) to avoid battery drainage during storage and transportation, Charging time: five to six hours/day, Working temperature: 40?C - 75?C, Lifetime: Three to five years, Easy installation, no maintenance, brightness sensitive auto-switch automatically turns on at night and turns off at dawn, high visibility LES"s help ensure easy and safe night driving, ideal for highways, parking lots, roads and similar isolated or stand-alone traffice applications,complete as per MORTH/ IRC specifications and manufacturers instruction, complete all as specified and directed. Model No. DA 113 of make DARK EYEor equivalent in3M / GREENS / GREENLITE PVT Ltd.
21	Supply and fixing plastic speed bump withhighly durable black and yellow , height 70mm, weight 2160 grms ,material PE with 7 years warranty complete all as per MORTH /IRC specification and manufacturer"s instructions complete all as specified and as directed. Model No. DA-1006 , design pattern No. 206431 of make DARK EYEor equivalent in3M / GREENS / GREENLITE PVT Ltd.
22	Supply and fixing retro reflective boards in shape of rectangle of size 1.0m X 1.40 m made out of 2 mm thick stainless steel both side bounded/ pested with high prismatic (iv) sheet as manufacturedwith desired letters/ logos/ designed as directed. the board shall be supplied with and including stainless steel frame made out of 25 mm dia pipe in frame around duly welded with and including stainless steel sheet and stainless steel posts of 38 mm dia and full length of 2.20 m one side and 2.8 m other side complete all as specified and directed. Note: Rate for fixing of boards with PCC 1:2:4 type B-2 filling of size 45 X 45 X 60 cm to be incl in unit rate. Makes: manufacture of sheet Avery Dennison or 3M
23	Supply and fixing aluminium road studs , two way reflective, dimensions 110x128x30 mm aluminium alloy body, reflective panel amber/ Red or white weight 530 complete aluminium coated of approved quality complete all as specified and as directed. Model No.DA-971 of make DARK EYEor equivalent in3M / GREENS / GREENLITE PVT Ltd.