Hpcl Biofuels Limited has published Tender For Open Tender Enquiry For Carrying Out Fabrication And Erection Works On Rate Contract Basis At Hbl Plant Lauriya.. Submission Date for this Tender is 03-05-2023. Measuring and Layout Tools Tenders in lauriya Bihar. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | FABRICATION OF MS PIPE LINES & FITTINGS |
2 | Fabrication of pipe lines (16"NB & above dia), Gutter, ducting & tanks etc. upto 8mm thickness. |
3 | Fabrication of pipe lines (16"NB & above dia), Gutter, ducting & tanks etc. 10mm thickness. |
4 | Fabrication of pipe lines (16"NB & above dia), Gutters, ducting & tanks etc.above 12mm thickness. |
5 | Fabrication of bend & Reducer below 14" (from pipe) |
6 | Fabrication of bend & Reducer above 14" (from pipe) |
7 | Fabrication of Tee, offset, Nipple, Blind, flange below 14" (from pipe) |
8 | Fabrication of Tee, offset, Nipple, Blind, flange above 14"(from pipe) |
9 | ERECTION & WELDING OF MS PIPE LINES & FITTINGS (2/3 rates will be applicable for dismantling, removing & shifting) |
10 | Erection and weldingof readymade MS Pipeline of sizes 1" to 16" NB including beveling the edges |
11 | Erection and welding of readymade MS Pipeline of sizes above 16" NB including beveling the edges. |
12 | Erection and welding of readymade MS Tee, Bend, Reducer, off-set, nipple, blind, etc. below 14". |
13 | Erection and welding of readymade MS Tee, Bend, Reducer, off-set, nipple, blind, falnge, etc. above 14" |
14 | Erection and welding of readymade MS flange upto 10" dia. |
15 | Erection and welding of readymade MS flangeabove 10" dia. |
16 | ERECTION & FITTING OF VALVES, NRVs & BELLOWS (2/3 rates will be applicable for dismantling, removing & shifting) |
17 | Erection and Fitting of valves, NRV & expantion below upto 10". Job includes placing suitable gaskets and fixing with Nut/bolts, washers etc. |
18 | Erection and Fitting of valves, NRV & expansation 12" to 20". Job includes placing suitable gaskets and fixing with Nut/bolts, washers etc. |
19 | Erection and Fitting of valves, NRV & expansation above 20". Job includes placingsuitable gaskets and fixing with Nut/bolts, washers etc. |
20 | FABRICATION & ERECTION OF SS PIPE LINES (2/3 rates will be applicable for dismantling, removing & shifting) |
21 | Erection and welding ofreadymade SS pipeline 1"to 14" |
22 | Fabrication of SS Tee, bend, Reducer, offset, nipple blind, flange etc. upto 14" |
23 | Erection and welding of SS Tee, bend, Reducer, offset, nipple, blind, flange etc. upto 14" |
24 | Fabrication of SS Pipe, Gutters, etc. |
25 | FABRICATION & ERECTION OF MS STRUCTURE/ RAILING/ EQUIPMENTS ETC. (2/3 rates will be applicable for dismantling, removing & shifting) |
26 | Fabrication of staging/structure, platform, support etc made out of angles, channels, beams, Plates, chequred plates, flats, pipes of any section. |
27 | Fabrication of beams/girder out of MS plates |
28 | Erection of staging/structure, platform, support & chequred plate etc made out of angles, channels, beams, Plates, chequred plates, flats, pipes of any section. |
29 | Fabrication & Erection of 2 tier railing out ofPipe size upto 1.5" NB |
30 | Fabrication of cone out of MS plates |
31 | Erection of cone out of MS plates |
32 | Fabrication of MS coil in tanks/Mixtures (From pipe) |
33 | Erection of MS coil in tanks/Mixtures (From pipe) |
34 | Fabrication & welding of MS ring over pipes of 150 mm width x 10mm thk, strengthening the same with 75mm x 6mm angle ring over the same. |
35 | Fabrication of Base frame for motor & gear |
36 | Erection & alignment of pump, motor & gear box |
37 | Erection of Equipments, tanks etc |
38 | DISMANTLING OF STAGING STRUCTURE |
39 | Dismantling of MS equipments, support, stool, staging structure, truss, purlin, columns, Pipe lines of above 16" etc. material |
40 | Dismantling of MS pipes below 16" |
41 | ERECTION OF EN-8, SQUARE BAR |
42 | Erection of EN-8 Bar |
43 | DISMANTLING OF EN-8, SQUARE BAR |
44 | Dismantlingof EN-8, Square Bar |
45 | TUBE FITTING |
46 | Removing, fitting and expanding, hydraullic testing tubes for juice heater & evaporator size - 45mm OD X 2.5mtr length |
47 | Removing, fitting and expanding, hydraullic testing tubes for juice heater & evaporator size - 45mm OD X 4.5mtr length |
48 | Fitting, expanding, hydraullic testing tubes for Pans. |
49 | Dismantling & Erection of EN-45 runner flat of carriers/conveyors |
50 | Dismantling, repairing & erection of SS screen of diffuser |
51 | MATERIAL UNLOADING/STACKING |
52 | Unloading of material like MS plates/Structures/Equipments from truck and stacking at Store or any other designated place as advised by HBL |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail