Tender For Civil Works For Shifting Of Dock Levelers And Sealing Warehouse Side Windows At Pta Terminal, Ppmc
Tender Value
Ref. Documents
Estimated cost
Bid Submission
01 May 2023
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Panipat → Haryana
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Civil Works For Shifting Of Dock Levelers And Sealing Warehouse Side Windows At Pta Terminal, Ppmc
BOQ
| Sl. No. | Item Description |
| 1 | Detailed BOQ |
| 2 | Demolishing R.C.C. work manually/ by mechanical meansincluding stacking of steel bars and disposal ofunserviceable material within 50 metres lead as perdirection of Engineer-in-charge. |
| 3 | Dismantling steel work in built up sections in angles,tees, flats and channels including all gusset plates, bolts,nuts, cutting rivets, welding etc. including dismemberingand stacking within 50 metres lead. |
| 4 | Supplying and stacking at site:Over burnt (Jhama) brick aggregate 90 mm to 45 mm. |
| 5 | Supplying and stacking at site:Fine sand (zone IV) |
| 6 | Providing and laying cement concrete in retaining walls,return walls, walls (any thickness) including attachedpilasters, columns, piers, abutments, pillars, posts, struts,buttresses, string or lacing courses, parapets, coping, bedblocks, anchor blocks, plain window sills, fillets, sunkenfloor etc., up to floor five level, excluding the cost ofcentring, shuttering and finishing:1:1½:3 (1 cement:1½ coarse sand (Zone-III) derived fromnatural sources : 3 graded stone aggregate 20 mmnominal size derived from natural sources). |
| 7 | Centring and shuttering including strutting, propping etc.and removal of form work for:Retaining walls, return walls, walls (any thickness)including attached pilasters, buttresses, plinth and stringcourses fillets, kerbs and steps etc. |
| 8 | Structural steel work riveted, bolted or welded in builtup sections, trusses and framed work, including cutting,hoisting, fixing in position and applying a priming coat ofapproved steel primer all complete. |
| 9 | Painting with synthetic enamel paint of approved brandand manufacture to give an even shade - Two or morecoats on new work. |
| 10 | Providing and laying in position machine batched andmachine mixed design mix M-25 grade cement concretefor reinforced cement concrete work, using coarseaggregate as well as fine aggregate derived from naturalsources and cement content as per approved design mix,including pumping of concrete to site of laying butexcluding the cost of centering, shuttering, finishing andreinforcement, including admixtures in recommendedproportions as per IS: 9103 to accelerate, retard setting ofconcrete, improve workability without impairing strengthand durability as per direction of Engineer-in-charge:(Note :- Cement content considered in this item is @ 330kg/cum. Excess/less cement used as per design mix ispayable/recoverable separately).All works above plinth level up to floor V level. |
| 11 | Steel reinforcement for R.C.C. work includingstraightening, cutting, bending, placing in position andbinding all complete above plinth level:Thermo-Mechanically Treated bars of grade Fe-500D ormore. |
| 12 | Disposal of building rubbish / malba / similarunserviceable, dismantled or waste materials bymechanical means including loading, transporting,unloading to approved municipal dumping ground or asapproved by Engineer-in-charge, beyond 50 m initial lead,for all loads including all lifts involved. |
| 13 | Extra for cutting reinforcement bars manually/ bymechanical means in R.C.C. or R.B. work (Payment shallbe made on the cross sectional area of R.C.C. or R.B.work) as per direction of Engineer-in-charge. |
| 14 | Mechanical shiftting of dock leveler including cutting of fastners, dismembering from angle supports from dock leveler pit and installation into new loading bay with fastners, sealant etc as per requirement for complete installtion (charges for civil works except \" transportation & cutting and new fastners, sealant as per requirement\" shall be paid extra ) |
| 15 | Dismantling aluminium/ Gypsum partitions, doors,windows, fixed glazing and false ceiling includingdisposal of unserviceable surplus material and stacking ofserviceable material with in 50 meters lead as directed byEngineer-in-charge. |
| 16 | Providing and fixing aluminium work for doors, windows,ventilators and partitions with extruded built up standardtubular sections/ appropriate Z sections and other sectionsof approved make conforming to IS: 733 and IS: 1285,fixing with dash fasteners of required dia and size,including necessary filling up the gaps at junctions, i.e. attop, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth,rust free, straight, mitred and jointed mechanicallywherever required including cleat angle, Aluminium snapbeading for glazing / paneling, C.P. brass / stainless steelscrews, all complete as per architectural drawings and thedirections of Engineer-in-charge. (Glazing, paneling anddash fasteners to be paid for separately) :For fixed portion - Powder coated aluminium (minimumthickness of powder coating 50 micron). |
| 17 | Providing and fixing glazing in aluminium door, window,ventilator shutters and partitions etc. with EPDM rubber /neoprene gasket etc. complete as per the architecturaldrawings and the directions of engineer-in-charge. (Cost ofaluminium snap beading shall be paid in basic item):With float glass panes of 8 mm thickness. |
| 18 | Dash fastener / Chemical fastener |
AI Tender Summary
Tender Timeline
Apr 17, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedMay 01, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMay 02, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender