Indira Gandhi Shahari Rojgar Garanti Yajana Main Colour Supply And Interloking Bricks Supply Work In Nagarpalika Weir For The Year 2023-24-Color And Bricks Supply In Nagarpalika Weir , Providing, Laying, Spreading And Compacting Of Granular Sub-Base By Providing Close Graded Material, Mixing In A Mechanical Mix Plant At Omc, Carriage Of Mixed Material To Work Site, Spreading In Uniform Layers With Motor Grader On Prepared Surface And Compacting With Vibratory Power Roller To Achieve The Desired Density, Complete As Per Mort&H Specification Clause - 401 Including All Material, Labour, Machinery, Lighting, Guarding And Maintenance Of Diversion.Grading - Iii Material , Providing And Laying Lean Cement Concrete 1:4:8 In Sub- Base Over A Prepared Sub-Grade With Coarse And Fine Aggregate Conforming To Is: 383, The Size Of Coarse Aggregate Not Exceeding 25 Mm, Aggregate Cement Ratio Not To Exceed 15:1, Aggregate Gradation After Blending To Be As Per Table 600-1, Cement Content Not To Be Less Than 150 Kg / Cum, Optimum Moisture Content To Be Determined During Trial Length Construction, Concrete Strength Not To Be Less Than 10 Mpa At 7 Days, Mixed In A Batching Plant, Transported To Site, Laid With A Paver With Electronic Sensor, Compacting With 8-10 Tonnes Vibratory Roller, Finishing And Curing Complete As Per Clause 601, 112 Of Mort&H Specification Including All Material, Labour, Machinery, Lighting, Guarding And Maintenance Of Diversion. , Providing And Fixing Of Precast Concrete Interlocking Tiles Of Desired Shape Of M 30 Grade Manufactured From Fully Computerized Automatic Stationery Hydraulic Vibrio Pressed Machine And Fully Computerized Automatic Batching Plant Of Class A1 / A2 As Per Bs 6717:2001. The Cc Interlocking Paving Blocks Be Laid On Average 50Mm. Thick Bed Of Coarse Sand And The Joint Is To Be Filled With Fine Sand. Laying Procedure On Compacted Sub-Base As Defined. Complete Job Is To Be Executed As Per The Instruction Of Engineer In Charge. The Rates To Be Inclusive Of All Lead & Lifts Etc. Complete As Per Specifications. Tensile Splitting Strength, Abrasion And Braking Load Etc. As Per Bs 6717:2001, Grey Cement. 80Mm Thick , Flooring With Cobble Stone Of Approx. Size 125X125x75 Mm ( Thick ) Laid On 25 Mm Average Thick Cement Mortar 1:3 ( 1 Cement : 3 Coarse Sand ) And Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Stone, Laid In Approved Pattern Complete In All Respect As Per Direction Of Engineer-In-Charge. , Painting Two Coats On Specified Surface With Synthetic Enamel Paint Of Approved Brand And Shade, After Thorough Cleaning And Necessary Filling To Give Even Shade As Per Clause 803 Of Mort&H Specification Including All Material, Labour.On New Plastered Concrete Surface , Painting Two Coats On Specified Surface With Synthetic Enamel Paint Of Approved Brand And Shade, After Thorough Cleaning And Necessary Filling To Give Even Shade As Per Clause 803 Of Mort&H Specification Including All Material, Labour.On New Plastered On Steel Surface , Painting Single Coat On Specified Surface With Synthetic Enamel Paint Of Approved Brand And Shade, After Thorough Cleaning And Necessary Filling To Give Even Shade Including All Material, Labour.On Wood / Steel Surface , Rubbing / Removal Of Lime Plaster On Stone Works By Abrasive Method Up To 1” Thick Layer , Distempering With Dry Distemper Of Approved Brand And Manufacture ( Two Or More Coats ) And Of Required Shade On New Work, Over And Including Priming Coat Of Whiting To Give An Even Shade. , Distempering With Oil Bound Washable Distemper Of Approved Brand And Manufacture To Give An Even Shade New Work ( Two Or More Coats ) Over And Including Priming Coat With Cement Primer , Applying One Coat Of Cement Primer Of Approved Brand And Manufacture On Wall Surface Cement Primer , Finishing Walls With Water Proofing Cement Paint Of Required Shade New Work ( Two Or More Coats Applied @ 3.84 Kg / 10 Sqm ) .
