Tender For Repair Maint Of Roof Leakage And Seepage Of Rcc Chajja Slab Flooring Joinery Plumbing Sanitary Fittings And Other Br Works In Hpp Dunn Marg Mall Rd Offrs Md Accn In The Area Of Age Brii Under Ge Mis Mhow
Tender Value
25 Lakhs
Estimated cost
Bid Submission
11 May 2023
0 days left
EMD
50000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Indore → Madhya Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Repair Maint Of Roof Leakage And Seepage Of Rcc Chajja Slab Flooring Joinery Plumbing Sanitary Fittings And Other Br Works In Hpp Dunn Marg Mall Rd Offrs Md Accn In The Area Of Age Brii Under Ge Mis Mhow
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 20-Apr-2023 | OTHER CORRIGENDUM | Other | 04-May-2023 |
| 2 | 04-May-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 11-May-2023 |
BOQ
| Sl. No. | Item Description |
| 1 | Taking down old roof treatment of any description , any type including removal of old Tar felt, screed, bed etc from roof surface and adjoining parapets and removing thedebris material to a distance exceeding 1500m out side defence land |
| 2 | M&L for brushing neat cement slurry at3 Kg of cement per Sqm for bonding of old concrete surface to new concrete / plaster surfaces all as directed . |
| 3 | M&Lfor Cutting out cracks to 6 mm wide\"V\" section in existing roofs or terrace , cleaning out, wetting, grouting withcement and sand slurry 1:3 mixed with and including chemical compound SUPER LATEX of DR. FIXIT of PIDILITE INDUSTRIES LTD or SBR LATEX of STP LTDas per Manufacturers instructions all as specified and directed complete. |
| 4 | M&Lfor plain cement concrete1:2:4 type B0using 12.5 mm graded crushed stone aggregatemixed with integral waterproofing chemical PIDIPROOF LW of DR FIXIT of PIDILTE INDUSTRIES LTD orSTP No. 1 (LIQUID) of STP LTD @ 200 mlper 50 Kg per cement, as in padding on roof surface for correcting / making proper slope on roof, and finishing the surfaces fair and even without using extra cement complete all as specified. Note:- Liquid WPC shall be measured and paid separately under relevant item. |
| 5 | M&L for10 mm thick rendering in cement mortar 1:3mixed with integral water proofing chemical compound PIDIPROOF LW of DR FIXIT of PIDILITEINDUSTRIES LTD or STP No 1 (liquid) of STP Ltd @ 200 mlper 50 Kg cement as per Manufacturers instructions over concrete surface and finishing the surface fair and even without using extra cement complete all as specified. Note:- Liquid WPC shall be measured and paid separately under relevant item. |
| 6 | Supply only liquid water proofing compound. |
| 7 | M&L for Water proofing treatment on \"Non approachable / non accessible roof\" surface (Horizontal & Vertical surfaces) in following sequence through authorized applicator of the Manufacturer all as specified and directed complete. |
| 8 | (a) cleaning of new rendered surfaces properly and drying the surfaces. |
| 9 | (b)Applying a coat of oxidised bitumen based solvent primer @ 0.30 Kg / Sqm |
| 10 | (c) Laying 3 mm thick APP modified water proofing membrane with 100 mm over laps sealed and bounded to the surfaces by \"torchon\" method. |
| 11 | (d) Applying two coats of bitiminous aluminium paint @ 200 gm/sqm(minimum) in each coat . |
| 12 | Taking down chowkhats or frames with shutter (with out taking off shutters from the frame) area n. exc 1.5 sqm each complete all as specified |
| 13 | Taking down chowkhats or frames with shutter (with out taking off shutters from the frame) area exc 1.5 but n.exc 4.0 sqm each complete all as specified |
| 14 | Taking down shutters of any description n.exc 1 sqmeach and removing from site complete all as specified |
| 15 | Taking down shuters of any description exc 1 sqm but n.exc 2 sqm each complete all as specified |
| 16 | S&F secondclass hard wood as in plain, solid straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified |
| 17 | S&F Mild steel angle or flat iron, small articles such as hold fast , brackets, straps, cleats, etc for door/window chowkats fe 410 W (gde E 250) qualityA including applying two coats of red oxide primer complete all as specified |
| 18 | M&L for PCC 1:3:6 type C1 using 20mm graded aggregate as in bed blocks of hold fast, etc complete all as specified |
| 19 | M&L for preparing surface of wood and wood based materials,steel and iron work,new or old (ie)back of chowkats area exc 0.1 sqm but n.exc 0.50 sqm and treated with two coats of tar or coal tarblack paint. |
| 20 | S&F for 35mm thick 2nd class hard wood plain, framed pannelled shutters (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board wiyh commercial veneering on both faces. The size of rail and stile as per (IS : 1003 part-I , kiln seasoned and chemically pressure treated complete all as specified |
| 21 | S&F 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified |
| 22 | S&F second class Hard wood35 mm thick glazed and skeleton(doors)shutters, open rebated and prepared to receive glass gauge etc, (with sash bars) edges of framing plain, chafered or rounded , fitted with cut and mitred beads for securing glass etc, size of members of shutter as specified in SSR Part I, Section 8, clause 8.24 (a) Supplied and fitted to chowkats complete all as specified |
| 23 | S&F 30mm thick factory made, second class hard wood,glazed and skeleton window/ventilator shutters, open repeated and prepared to receive glass,gauze etc(with sash bars) edges of framing plain, chamfered or rounded ,fitted with cut and mitered beads for securing glass etc, size of member of shutter as per specified in SSR part-I section 8,clause 8.24 (b) and for window and fixed with chowkats, chemically pressure treated complete all as specified |
| 24 | S&Ffactory made solid PVC door frame of size 50mm x 47mm made out of plain 5mm plain colour PVC sheet reinforced with ms square tube, with wooden grain printed PVC sheet used inserted of plain colour PVC sheet & edges will be painted to match with printed sheet complete all as specified and as directed |
| 25 | S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of ms tubes for top & bottom rails.MS frame shall be covered with heat moulded plain colour PVC \"C\" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colourPVC sheet for top rail, lock rail & bottom rail. Panelling of plain colourPVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified and as directed. |
| 26 | S&F in repairssteel window with side hung shutter including projecting type hinges with steel handle, peg stay complete with glazing bars dovetailed or welded complete all as specified |
| 27 | S&F in repairsPowder coated aluminium sliding glazedwindows with three track shutter sliding (two shutters glazed and one shutterwire mesh) shall be two part as upper partshall be three movable shutterand lower part consist ofthree shutter (one openable in centre and both side fixed type shutter with frosted glass) with following specification and making good the adjacent side of jambs of windows by plastering in CM1: 3 finished even and smooth complete etc . including shifting of existing cooler stand asrequired at sitecomplete all as specified and as directed by Engineer -in-charge.(i)Windows frame of cross section 101mm x 44mm x 1.5mm thick. (Min)(ii)Three way track for sliding shutters of cross section91.8mm x 31.75mm x1.1mm thick.(Min)(iii)Sliding shutter frame of cross section40 x 18 x 1mm thick.(Min)(iv)4 mm thickglass superior quality.(Min)(v) IDPE Rubber guasket for fixing of glass.(vi)Locking cleats per shutter -01 Nos.(Min)(vii)Sliding rollers per shutter - 02 Nos.(Min)(viii) Stainless steelwire cloth 0.30mm nominal dia of wire and average width of aperture 1.40mm for shutters 01 Nos.(Ix)fixing screw for frame with wall per windows- 08 Nos. |
| 28 | S&F in repairs powder coated aluminium ventilator cross section conforming to IS 63.5x38.10x1.5mm consisting of two partitions upper portion shall have louvers with 3mm thick pin headed glass and aluminium wire cloth 0.30mm nominal dia of wire and average width of aperture 1.56 mm fixed with aluminium beads and securing on outer face of frame and lower portion of ventilation shall be fixed with 3mm thick pin headed glass with IDPE rubber gasket including aluminium beads, including preparation of jambs all around in CM 1:3 finished even and smooth complete all as specified |
| 29 | M&L for preparation of new steel surfaceof any description, over 10 cm in width or girthand applying two coats of synthetic enamel paint over a coat of red oxide primer |
| 30 | M&L for preparation of new wood and wood based surfaces of any description not other wise described over 10cm inwidth or girth and applying two coats of synthetic enamel paint over a coat of pink primer. |
| 31 | S&Fgalvanised mild steel wire cloth of0.56mm dia wire and average width of aperture 1.18mm & fixed with tacks or galvanised I wire staplescomplete all as specified |
| 32 | S&F in repair galvanized mild steelwire clothes 0.56 nominal dia of wire and average width of aperture 1.18mm fixed with beading complete all as specified |
| 33 | M&Lsheet glass ordinary quality 3mm thick and glazing with oil putty in squares. not exc 0.5 Sqm eachcomplete all as specified |
| 34 | S&F figured glass pin head type3.0 mm thick ordinary quality and glazing with oil putty, in squares n. exc 0.5 sqm in each pan complete all as specified |
| 35 | Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames or stone, concrete or brick surrounds, glazed with putty of fixed with beads including Supply and fix sheet glass plain ordinary quality 3.00 mm thick and glazing with oil putty/Bead not exc. 0.50 sqm in each pane complete all as specified |
| 36 | S&F 100 mm Butt hinges medium weight cold rolled mild steel and fixed |
| 37 | S&F 75mm Butt hinges medium weight cold rolled mild steel and fixed |
| 38 | S&FAluminium anodised barrel tower bolts of extruded section, 150mm long . |
| 39 | S&FAluminium anodised barrel tower bolts of extruded section, 100mm long . |
| 40 | S&F Extruded aluminium alloy handles fabricated type anodised 150mm size |
| 41 | S&F Extruded aluminium alloy handles fabricated type anodised 100 mm size . |
| 42 | Dismantling timber framedfillets, rails, post, rafters purlins under 40 Sqcm in section complete all as specified . |
| 43 | S&F plain fillets , square rectangular or triangular in section ,clean sawnsecuredwith nails or breads of secondclass hard wood exceeding 6 sqcm but not exceeding 13 sqcm complete all as specified |
| 44 | S&F plain fillets , square rectangular or triangular in section ,clean sawnsecuredwith nails or breads of secondclass hard wood exceeding 13 sqcm but not exceeding 25 sqcm complete all as specified |
| 45 | S&F in repair Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on both faces; fixed with screws to timber frame work complete all as specified . |
| 46 | S&F in repairs Block boards, grade 1 quality, exterior grade, decorative type with decorative face veneer on both facesfor 18/19mm fixed with screws to timber frame work complete all as specified |
| 47 | S&F Hasp & staple of 100mm size safety type of aluminium anodised including bolt to hinges plate and fixed with screws |
| 48 | S&F in repair 25 mm dia mild steelPVC coateddrapperycurtain rod withbrass /nickel chrome polish bracket for each curtain complete all as specified |
| 49 | M&L Taking down cement plaster on brick or stone walls, etc. with raking out joints, hacking for key, scrubbing down with water, etc complete all as specified |
| 50 | M&L for rendering 15mm thick incement mortar 1:4 onbrick or concrete surface finished even and smooth without using extra cement complete all as specified |
| 51 | M&L for rendering 10 mm thick in cement mortar1:6on wall / concrete surface finished even and smooth without using extra cementcomplete all as specified |
| 52 | M&L for rendering 15 mm thick in cement mortar1:4on wall/ concrete surfaces finished even and smooth without using extra cement WPC compound complete all as specifiedNote: WPC shall be measured and paid separetly under relevant item. |
| 53 | M&L for preparation of new plasteredsurface of wall and applying two coats of oil emulsion distemper over a coat of primer over a coat of JK/Birla wall care putty 2mm thick complete all as specified |
| 54 | M&L for preparation of newplasteredsurfaces of walls and applying two coats of cement based paint over a coat of primer completeall as specified |
| 55 | Demolition of cement concrete in ground floor and paving not exceeding 15cm thick ( below or above ground level ) complete including removal of debries out side MD land all asspecified . |
| 56 | M&Lfor plain cement concrete 1:2:4 type B1 using20 mm graded stone aggregate as in coping, surface channel, bearing course, manhole/ drain channeland other similar worksincluding necessary formwork complete all as specified |
| 57 | M&L for40mm thick PCC 1:2:4type B1 using 20 mm graded crushed stone aggregateas in flooring,finished even and smooth with out using extra cement complete all as specified . |
| 58 | M&L for75 mm thick plain cement concrete 1:4:8 type D2 using 40mmgraded stone aggregate as in foundation, sub base of floor, etccomplete all as specified . |
| 59 | M & L for 75mm thick cement concrete 1:3:6 type C2, with using 40mm graded stone aggregateas in floor/ plinth protection finish the surface even and smooth without using extra cement including filling the expansion joints with bitumen filler / filler boards and necessary form work etc complete all as specified |
| 60 | Dismantling of floor, hearth , or wall tiling including cement mortar bedding ( but not backing ) removing serviceable tiles to store yardand rubbish off the primeses complete all as specified. |
| 61 | M&L for non skidceramic colouredtiles 7-8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in colouredcement to match with colour of tile over and including 15mm thick screed bed or bedding layer in CM 1: 6 complete all as specified |
| 62 | All as per item No 57 above but as in skirting/ dado etc with and including 10mm thik backing coat in cement mortar 1:4 an wall complete all as specified |
| 63 | M&L for glazed ceramic coloured tiles of size 450x350x7 mm thick as on vertical surfaces such as wall, dado ,skirting etc set and jointed in neat cement slurry and pointed with coloured cement to match over 10 mm thickbacking coat on fair faces of brick work in CM (1:4) complete all as specified |
| 64 | M&L forrubber moulded chequered cement concrete tile with grey cementand pigment of size 40cm x 40cm x 25mm thick ,set , jointed and pointed in neat cement slurry in floor over and including 15mm thick screed bed in CM 1:6complete all as specified |
| 65 | M&L for Cleaning and removing all dirts and scales from service water tanksand from mouth of circulating pipes etc capacity of tank exceeding 250 litres but not exceeding 500 litrescomplete all as specified |
| 66 | All as per item no 61 above but exceeding 500 litres but not exceeding 1000 litres capacity complete all as specified |
| 67 | S&F in repairs of 500 litres capacity Rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) double layered hoisted and fixed in position complete all as specified in SSR Part-I |
| 68 | S&F in repairs of 1000 litres capacity Rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) double layered hoisted and fixed in position complete all as specified in SSR Part-I |
| 69 | Taking up ordown 15 mm dia old serviceable / unserviceable steel tubing any grade and connections cleaning for re-fixing or removal to store complete all as specified |
| 70 | All as per item no 65 above but for 20mm bore |
| 71 | S&F steel tubing medium grade ,galvanized with all fitting such as bend ,elbow, socket,tees,and fixed complete to wall or in ceiling or in floors including cutting threading and making forged bends on pipes MS hooks etc ,for 15mm bore pipes complete all as specified |
| 72 | All as per item no67 above but for 20mm bore |
| 73 | S&F in repairs 15 mm dia bib taps cast copper alloy, screwed down high pressurechromium plated screwed for iron pipe and fixedcomplete all as specified. |
| 74 | S&F in repairs 15 mm dia bib cock two way with flange, cast copper alloy, fancy type, chromium plated screwed down for iron pipe and fixed in repairs complete all as specified |
| 75 | S&F in repairstop valves fancy type chromium plated with long shanks fixed with 15 mm dia bore pipes complete all as specified. |
| 76 | S&F in repair pillar taps (swan neck type) cast copper alloy with capstan head, screwed down ,high pressure with long screwed shanks and fly nuts fixed in 15 mm bore pipes complete all as specified. |
| 77 | S&Fin repair fancy type chromium plated 15mm boretwo way angle valve cast copper alloy with crutch or butterfly handle, screwed for iron pipe or brass ferrule etc complete all as specified |
| 78 | S&F in repair CP wall mixer for mixing hot & cold water screwed down for ironpipe 15mm borecomplete all as specified |
| 79 | S&F in repairsconcealedstop valve fancy type chromium plated with long shankand cup fixed with 15 mm dia bore pipecomplete all as specified |
| 80 | S&F in repair 125 mm size chromium plated showerrosewith siwel joint suitable for 15 mm bore GI pipes |
| 81 | S&F in repair CP toilet paper holder complete all as specified |
| 82 | S&F in repair vitreous china wash down water closet pedestalpattern white excluding flushing cistern and flush pipes complete all as specified and as directed . |
| 83 | S&F in repairs PVCvalve less,syphonic action type flushing cistern,low level ,10 litres capacity ,white with inlet ball valve,float and handle including bracketsand connection to pipe and fixing of chainand pull or lever if any complete all as specified |
| 84 | S&F in repair health faucet with flexible pipe of one metre length including wall hook forEWC complete |
| 85 | M&L fixed in repairswash basins, vitreous China white flat back size 580x450mm size, including cutting for and pinning in ends with andincluding MS adjustable brackets or erecting standcomplete all as specified |
| 86 | S&F in repairs PVC (SWR) floor trap plain or multi with stainless steel grating includingjoining to waste pipe with solvent cement joint dia of outlet 75mm bore complete all as specified |
| 87 | S&F in repairs CP grating 100mm dia including fixing with white cement |
| 88 | S&F in repair 600x450mm bevelled edge mirror of selected quality glass mounted on PVC framed and fixed to wooden plug with CP screw and CP washer ccomplete all as specified. |
| 89 | S&F in repairs Stainless steel sink with drainage board , 1.00mm thick for kitchen, with plug, washers and wastes couplin ,waste pipe etcincluding bedding in cement mortar on to dwarf wallor including fixingcantilever brackets and connecting union to pipe, overall size 915mm x 460mm with bowl size 410mmx 330mmx 160mm fixed complete all as specified |
| 90 | S&F in repairs PVC connection15mm size with PTMT nuts of length 450 mm long |
| 91 | S&F in repairs PVC waste pipe for wash basin/ sink pipe 32/40mm bore 65cm to 90cm long |
| 92 | Dismantling PVCpipes jointed in cement mortar 110 / 75 mm bore including fittingsall as specified |
| 93 | S&F110mm bore of PVC (SWR) pipes single socketed in any length with rubber ring joints laid on wall / floor complete all as specified |
| 94 | S&F 75mm bore of PVC (SWR) pipes single socketed in any length with rubber ring joints laid on wall / floor complete all as specified |
| 95 | S&FPVC ( SWR) bends any radius bore of 110 mm |
| 96 | S&F PVC ( SWR) bends any radius bore of 75 mm |
| 97 | S&F 110mmPVC ( SWR) junction single (single T/Y)equal or unequalof all as specified |
| 98 | S&F 75mmPVC ( SWR) junction single (single T/Y)equal or unequalofall as specified |
| 99 | M&L for cutting chases not exc 10cm in girthin brick wall for concealed water tubing or concealed conduit wiring, etc. pinning in andmaking good to facings where required and pointing in cement mortar 1:3 complete all as specified and directed. |
| 100 | M&L for complete removal of existing treatment on wall (anynumberof layers) by scrapping with steelscrapper or any other meansand applying two coat of oil emulsion distemperovera coat of primer including onecoat 1mm to 2mmthickJK / BIRLA white wall care puttycomplete all as specified |
| 101 | Demolition of reinforced cement concrte of any description and in any position including cutting and removingreinforcement and removal of debries out side MD land all asspecified . |
| 102 | M&L for precast reinforced cement concrete 1:2:4 type B1using 20mm graded stone aggregateas in kitchen shelves , manhole cover, set in cement mortar 1:6 includinguse and waste of formwork all complete all as specified .Note: Reinforcement shall be measured and paid separately under relevant item. |
| 103 | M&L TMTbar 10 mm dia and over, cut to length, bent to shape required ,including cranking ,bending spirally for hooping for columns,hooking end and binding with and including mild steel wire and annealednot less than 0.9 mm dia or securing with clips complete all as specified and directed. |
| 104 | S&Fin repairs stainless steel hinges for modular kitchen shuttersall as specified |
| 105 | S&F in repairs powder coated aluminium door seals 120 cm in length and 3 cm in width includingrubber gasket fixed at bottom of door all as specified and as directed. |
AI Tender Summary
Tender Timeline
May 04, 2023
11:30 IST
Tender Published
Tender notice published.
Completed
May 04, 2023
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
May 11, 2023
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
CompletedMay 11, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMay 13, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender