Tender For Construction Of Solar Power Based Water Supply Scheme With Water Storage Tank Having Capacity 5000 Liters In New Borewell In Archary Traning Center Kumardungi
Tender Value
8.59 Lakhs
Estimated cost
Bid Submission
19 Apr 2023
0 days left
EMD
18000
Bank guarantee accepted
Document Fee
1250
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
kumardungi → Jharkhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Solar Power Based Water Supply Scheme With Water Storage Tank Having Capacity 5000 Liters In New Borewell In Archary Traning Center Kumardungi
BOQ
| Sl. No. | Item Description |
| 1 | Provision & installation of solar powered submersible auto run & stop DC pump motor (900 wp) of stainless steel suitable for minimum 125mm x 115mm bore well operting head 60 mtr discharge rate 2000 LPH with lowering up to 60 mtrs.32mm dia UPVC schedule 80 column pipe & 2.5 sq mm x 3 core flat submersible cable of IS 694;1190 including monal / poly crystaline PVC array (900 wp) mounted on steel structure for storage water tank in suitable arrangements to operate hand pump manually in the same bore when there is no solar powerincluding 5 years warranty against defects in materials and workmanship with locking arrangements with switch board. the system should be eco-friendly |
| 2 | Supplying labour tools for dismantaling of headwater tank & extraction of old pipe & cylinder and fitting fixing the same with lowering the same pipe after changing of new brass cylinder and after making modification for duel pump system as per direction of E/I. (old cylinder will be deposited in department store). |
| 3 | Supplying and fixing of 32mm brass cylinder |
| 4 | Yield test of existing bore by lowering of 1 H.P submersible pump with all accessories and running the pump for 3 hours with the help of generator set and then calculating the discharge of the bore by 90 degree V notch including the cost of transportation , fuel charge and wages of operator all complete job including testing ;of water quaility of source. |
| 5 | Providing and placing on terravce(at allfloor levels ) polyethlene water storage tank of approved brand and manufacture with cover and suitable locking arrangement and making necessary holes for inlet and overflow pipe but without fitting and the base support for tank. |
| 6 | Earth work in excavation (as per is 3114/1965 for laying of different type and sizes of pipe so as to given one meter average cover over the socket of pipe with disposal of excavated earth within initial lead as per specification and direction of Engineer in charge.Soil `B` |
| 7 | Supplying and fitting fixing structural square tube of 6mm thickness 75x75mm for column,60x60mm and 40x40mm size for bracing.75x75mm size50x50mm40x40mm |
| 8 | 6mm thick plate |
| 9 | Labour for fabricating, erecting hoisting and fixing in position structural steel work in R.S joist, channel, angle tee,flat,plate, laticemember ,pipe, built up compond section in column, girder, staircass or truss including cost of gussset plates, holding down bolts, anchr plates and depth, bolting welding with applying a primer coat of red lead paint all complete as per approved drawing, building specfication and direction of Engineer-in-charge. |
| 10 | Providing R.C.C.M-150 in nominal mix of (1:2:4) in foundation with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening, shuttering mixing cement concreting in mixer and placing in position vibrating striking curing, taxes and royalty all complete as per building specification and direction of E/I. |
| 11 | Providing 12mm cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I. 5.7.3 |
| 12 | Providing 1.5mm cement punning including curing, carriage of water with all leads and lift as per building specification and direction of E/I.5.7.11 |
| 13 | Supplying material, labours for painting exposed steel structure and fitting with one coat of approved aluminum paint …do all complete as per specification and direction E/I. |
| 14 | Supplyingl, fitting & fixing G.I pipe conforming to IS 50mm dia G.I pipe |
| 15 | 40mm dia G.I pipe |
| 16 | 25mm dia G.I pipe |
| 17 | Supplying and fixing G.I fittings of approved make all complete as per specification and direction of E/I. 3.1.13 25mm elbow |
| 18 | 40mm elbow |
| 19 | 50mm elbow |
| 20 | 25mm tee |
| 21 | 40mm tee |
| 22 | 50mm tee |
| 23 | 25mm reducing socket |
| 24 | 40mm reducing socket |
| 25 | 50mm reducing socket |
| 26 | 25mm nipple |
| 27 | 40mmnipple |
| 28 | 50mmnipple |
| 29 | 25mm plug |
| 30 | 25mm socket |
| 31 | 40mm socket |
| 32 | 50mm socket |
| 33 | Providing and fixing 25mm dia gun matel full way valve of approved make all complete as per specification and direction of E/I. |
| 34 | Add 5% carriage for material |
| 35 | BORWELL Cost of drilling 20mm x 150mm x 150mm deep borwell in all kind of soil and rock in rural or any other area for installation of pumpset with hydraulic supplying all materials, tools, drilling Rig and air compressure & equipments as well as fuel, lubricants and cost of tranportation or rig machine and other vehicle up to the site including cost of flushing charge etc all complete. i) 0 to 50 mtr |
| 36 | ii) 50 to 180 mtr |
| 37 | Supplying assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of 200mm nominal size dia, conforming to IS:12818, including required hire and labour charges, fitting & accessories etc. all complete for all depths as per direction of E/I. |
| 38 | Supplying all materials, labours,tools & equipements for fitting & 200mm dia MS cap over casing pipe complete job. |
| 39 | G.S.T @ 18% |
| 40 | Labour Cess 1% |
AI Tender Summary
Tender Timeline
Apr 14, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedApr 19, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedApr 21, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender