Tender For Periodic Renewal Of Orathur To Thandarai Road Km 0/0-0/735 In Thandarai Panchayat In Thiruporur Block Of Chengalpattu District Having Pkg No.18
Tender Value
39.53 Lakhs
Estimated cost
Bid Submission
03 May 2023
0 days left
EMD
40000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
thiruporur → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Periodic Renewal Of Orathur To Thandarai Road Km 0 / 0-0 / 735 In Thandarai Panchayat In Thiruporur Block Of Chengalpattu District Having Pkg No.18
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 13-Apr-2023 | Date Corrigendum | Date | 03-May-2023 |
| 2 | 21-Apr-2023 | Revision in Notice Inviting Tender | Other | 03-May-2023 |
BOQ
| Sl. No. | Item Description |
| 1 | Earth work Excavation for Foundation of structures upto 3.00m depth as per drawing and technical specification clause 1104 including seting out construction of suring and bracing removal stumps and other deletarious methods dressing of sides and bottoms and back filling with approved material. |
| 2 | Providing and layingtack coat over BTsurfaceusing 3 kgs. of emusion for 10 sqm.area including cost and conveyance of bituminous binderincluding labour charges for preparing the surface and applying the required quantity of bitumen as tack coat by bitumen sprayer etc., complete as per clause 503 of MOST specification |
| 3 | Provdingand laying butuminous macadam with hot mix plant using crushed aggregates of grading as per table 500.4 premixed with bituminous binder transported to site upto a lead of 1000 m laid over a previously prepared surface with paver finsher to the required grade, level and alignment and rolled to achieve the desired compaction including using shredded plastic wastes at 8% of the weight of bitumen used as per Technial Specification clause 504. |
| 4 | Providing and layingtack coat over BTsurfaceusing 2.5 kgs. of emusion for 10 sqm.area including cost and conveyance of bituminous binderincluding labour charges for preparing the surface and applying the required quantity of bitumen as tack coat by bitumen sprayer etc., complete as per clause 503 of MOST specification |
| 5 | Providing and laying Bituminious concrete 30mm thick using 0.13cum of 19.00-9.50mm. 0.17cum of 9.5-2.36 and below with 50.3kgs of VG30/VG40 heating the bitumen and aggregates to required temperature and mixing them in required temperature in central hot mix plant 20-30 ton capacity, carrying the mix by tipper trucks to paver site, spreading the mix to uniform thickness of 40mm with mechanical paver to the specified grades and cross sections and consolidated by 8-10 tonnes vibratory/phenumatic roller to the required density etc., including labour for attending to paver to site etc.including hire charges and fuel charges foe 20-30t CMP with bitumen boiler, tipper trucks,paver finisher/9m paver finisher,vibratory/phenumatic roller and all other tools and plants required, including fuel and all other incidental charges etc., complete as per specification using CMP as per clauses 507 of MORTH Part-5 |
| 6 | Wearing Coat with CC 1 : 1.5 : 3 mix using 65% of 25mm, 25% of 12mm, and10% of 6mm IRCmetal including cost of all materials and labour charges for mixing, laying, compacting and curingetc. complete. |
| 7 | Filling gravel for shoulders and berms including cost and conveyance of all materials to site and stacking them to departmental guage for premeasurements and labour charges for filling etc., complete. |
| 8 | Km 0/0 - 0/735 |
| 9 | 90 cm Equilateral triangle cautionary signboard |
| 10 | a. 60 cm Equilateral triangle cautionary signboard |
| 11 | b. 60 cm Circle(MANDATORY SIGN) |
| 12 | c.Chevron signs 90 cm Octogon(Curves) |
| 13 | Road Marking with Hot applied Thermoplastic compound with Reflectorising Glass beads on Bituminous Surface Providing and laying of hot applied thermoplastic compound 2.5mm thick including reflectorising glass beads @250gms per sqm area, thickness of 2.5mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level uniform and free form streaks and holes etc complete as per MORT&H specification no.803 |
| 14 | Supplying and fixing of HM stone of size 0.75x0.23x0.10 m including cost and conveyance and all other labour charges etc., complete |
| 15 | Road Marker/ Road stud with lens Reflector Providing and fixing reflective road studs of \"Category A\" raised pavement markers made out of poly carbonate/ methyl methercrylate/ABS moulded body confirming to ASTM D 788 and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lenseface with ratro reflectance and chromaticity values conforming to ASTM D4280. The reflective raised pavement markers shall also confirm to the MORTH circular No.RW/NH 33023/10/97-DO.III dt 11.06.97. The height , width and length shall not be less than 15mm, 90mm and 100mm and with minimum reflective area of 13 Sq cm on each side and the slope to the base shall be 35+/-5 degree . Each reflector shall have a CIL not less than values specified in Table 2 of said MORTH circular. The strength of detachment of the integrated cylindrical shanks, (of diameter not less than 19+/- 2mm and height not less than 30+/-2 mm) from the body is to be a minimum value of 500kgf. Fixing wil be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer\"s recommendation and complete as directed by the engineer. The marker shall support a load of 13635 Kg tested in accordance with ASTM D4280 and confirming to IRC 35-2015 guidelines and MORT&H specification 804 etc., Complete. |
| 16 | Routine Maintenance after completion ofwork the road sufrace and shoulder to be maintained in proper condition to make them free from excessive edge drop offs, roughness, scouring and pot holes and cleaning of surface drain including culverts for frre flow of water. Relettering name boards and K.M & H.M stone and other maintenance operation required to keep the road traffic worthly at all the time for the maintenance periodfor the following years. As per General condition of contract para 32.2.2 |
| 17 | For 1st Year |
| 18 | For 2nd Year |
| 19 | For 3rd Year |
| 20 | For 4th Year |
| 21 | For 5th Year |
| 22 | GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column \"BB\" for all works in this package} |
AI Tender Summary
Tender Timeline
Apr 21, 2023
11:30 IST
Tender Published
Tender notice published.
Completed
May 03, 2023
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
May 03, 2023
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
CompletedMay 03, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedApr 19, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender