Tender For Supply, Carriage And Installation Of Shrine Board Parshad And Silver Coin Stall Shop At Holy Cave, Srinagar-Jammu And Kashmir

Tender For Supply, Carriage And Installation Of Shrine Board Parshad And Silver Coin Stall Shop At Holy Cave- 1 Steel Work In Built Up Tubular ( Round, Square Or Rectangular Hollow Tubes Etc. ) Trusses Etc., Including Cutting , Hoisting , Fixing In Position And Applying A Priming Coat Of Approved Steel Primer, Including Weldingand Bolted With Special Shaped Washers Etc. Complete. Hot Finished Welded Type Tubes ( Make-Jindal / Tata / Sail / Jsw ) 2 Structural Steel Work In Built Up Sections, Trusses And Framed Work, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer All Completeincluding Cost Of Nuts & Bolts.Welded ( Make-Jindal / Tata / Sail / Jsw ) 3 Providing And Fixing Puf Insulated Sandwich Panels For Walls And Roofing Of Total Thickness Not Less Than 50 Mm. Panel Shall Have 0.5 Mm Thick Precoated Gi Sheet On Both Side Of Polyurethane Foam Confirming To Is 12436: 1988. The Ppgi Sheet Should Have Plastic Protective Guard Film Of Minimum 25 Microns To Avoid Scratches While Transportation . The Pu Foam Shall Be Self-Extinguishing, Fire Retardant. Also All Joints Of Roofing Would Be Fill With Silicon . ( Make- Jindal Mectec / E Pack Polymers / Modern Prefab Systems ) 4 Providing And Fixing Of Nuts , Bolts & 1.2 Mm Thick Pgi Sheetu-Section And Flashings 5 Providing And Fixing Precoated Galvanized Iron Profile Sheets ( Size, Shape And Pitch Of Corrugation As Approved By Engineer-In-Charge ) 0.50 Mm ( + 0.05 % ) Total Coated Thickness With Zinc Coating 120 Grams Per Sqm As Per Is: 277, In 240 Mpa Steel Grade, 5-7 Microns Epoxy Primer On Both Side Of The Sheet And Polyester Top Coat 15-18 Microns. Sheet Should Have Protective Guard Film Of 25 Microns Minimum To Avoid Scratches During Transportation And Should Be Supplied In Single Length Upto 12 Metre Or As Desired By Engineer-In-Charge. The Sheet Shall Be Fixed Using Self Drilling / Self Tapping Screws Of Size ( 5.5X 55 Mm ) With Epdm Seal, Complete Upto Any Pitch In Horizontal / Vertical Or Curved Surfaces, Excluding The Cost Of Purlins, Rafters And Trusses And Including Cutting To Size And Shape Wherever Required. 6 Precoated Galvanised Steel Sheet Roofing Accessories 1 Mm ( +0.05 % ) Total Coated Thickness, Zinc Coating 120 Grams Per Sqm As Per Is: 277, In 240 Mpa Steel Grade, 5-7 Microns Epoxy Primer On Both Side Of The Sheet And Polyester Top Coat 15-18 Microns Using Self Drilling / Self Tapping Screws Complete : ( I ) Ridges Plain ( 500 - 600Mm ) 7 Supply And Fixing Of Door Composited With50mm Puf Panel ( Polyurethane Foam Conforming To Is 12436:1988 And Ppgisheet Conforming. Sheet Shall Have Guard Film Of 25 Micron To Avoid Scratches During Transportation ) .Doors With Frame Work Of Aluminum Anodized Channel ( Profile ) Of 60Mmx40mmx2mm Thick Including Cost Of02 Nos. Anodised Aluminium Handles 125 Mm, 02 Nos. Anodised Aluminium Sliding Door Bolt 250 X16 Mm , 02 Nos. Anodised Aluminium Tower Bolt ( Barrel Type ) 200 X10 Mm, 04 Nos. Anodised Aluminium Butt Hinges 75X45x3.2 Mm Etc Complete. ( I ) ( Doors Of Size 1.00Mx2.10M ) Including Cost Offrame Etc Complete 8 Supply And Fixing Of Double Leaf Window Of Size 1.00Mx1.00M Composited With Milld Steel Erw Pipes For Frames Of Sectional Size 65X50x25mm & 65X35x25 Mm And 55X40x20 Mm For Shutter Including Safety Grill On Outer Side Made With 10 Mm Thick Square Bar Having Centre To Centre Spacing Of 10Cm On Both Longitudinal And Transverse Axis.Window Shutter Is Fixed With 5Mm Thickpoly Carbonate Glass Of Density Not Less Than 1.20Gm / Cm3 Including Cost Of04 Nos. 100X58x1.90 Mm Mild Steel Butt Hinges, 02Nos. 125 Mm Mild Steelhandles , 04Nos. 150X10 Mm Mild Steel Tower Bolts Etc Complete . 9 Providing And Laying Damp-Proofcourse 50 Mm Thick ( Dpc ) With Cement Concrete 1:2:4 ( 1 Cement:2 Coarse Sand: 4 Graded Stone Aggregate 20 Mm Nominal Size ) And Curing Complete. 10 Providing And Laying In Position Cement Concrete Of Specified Grade Including Curing But Excluding The Cost Of Centring And Shuttering. All Work Upto Plinth Level With:1:2:4 ( 1 Cement : 2 Coarse Sand : 4Graded Stone Aggregate 20 Mm Nominal Size ) 11 Demolishing Cement Concrete Manually / By Mechanical Means Including Disposal Of Material Within 50 Meters Lead As Per Direction Of Engineer-Incharge1:4:8 Or Leaner Mix ( I / C Equivalent Design Mix ) 12 Carriage Of Material By Mt From Ganderbal To Dumail For An Avg Lead Of 73 Kms 13 Carriage Of Cement By Head Load For A Lead Of 12 Kms From Dumail To Holy Cave. 14 Carriage Of Cement By Head Load For A Lead Of 12 Kms From Dumail To Holy Cave. 15 Carriage Of Sand & Bajri By Head Load For An Average Lead Of 6 Kms.

Sr No	CorrigendumDate	Corrigendum	CorrigendumType	NewSubmissionDate
1	17-04-2023	Extension	Date	24-04-2023
2	24-04-2023	Extension Last	Date	28-04-2023

INR 400 /-

INR 8200.0 /-

INR 4.10 Lakhs /-