Tender For Construction Of Model Health Sub Center (Building) At Vill- Fhatepur, Block- Amrapara, District- Pakur
Tender Value
55.50 Lakhs
Estimated cost
Bid Submission
18 Apr 2023
0 days left
EMD
1.11 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
amrapara → Jharkhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Model Health Sub Center ( Building ) At Vill- Fhatepur, Block- Amrapara, District- Pakur
BOQ
| Sl. No. | Item Description |
| 1 | Earthworkinexcayatlonin foundationtrenchesin ordinary soil (vide classification of soil item-B) and disposal of excavated earth as obtained to a distance up to 50mts.including all lift, leveIling, ramming the foundationtrenches, removing root of tree, shrubs all completeas perapproveddesign,buildingspecification and direction of E/I. |
| 2 | Extraforearth workinhard soilas perspecification & direction of E/I. (Vide classification of soil item B ) |
| 3 | Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads including cost of materials,labour, royalty and taxes all complete as per building specification and direction of E/I |
| 4 | Providing designation 75 B one Brick flat soling joints withlocal sand including cost of watering taxes and royalty all complele as perbuilding specification and direction of E/I. |
| 5 | Providing and laying in position cement concrete of specified grade excludingCentering, shuttering. All work up toplinth 1evel as per building specification and direction of E/I.for P.C.C M-150 in (1:2:4) up to Plnth level |
| 6 | Proividing and laying in position specified grade of reinforced cement concrete all work up to plinth level but excluding cost of reinforcement,Centering, shuttering and finishing as per building specification and direction of E/I.for R.C.C M-200 in (1:1.5:3) up to Plinth |
| 7 | Providing designation 75 B Brick work in C.M.(1:6) in Foundation with approved quality of clean coarse sand ofF.M.2.00 to 2.5 including 10 mm thick mortar joints, cost of screening, scaffolding,raking out joints to 15mm. depth, curing,taxes and royalty all complete as per building specification and direction of E/I |
| 8 | Earth filling in foundation trenches and plinth not exceding 150 mm thick well watered, rammed, fully compacted andfine dressed with earth obtained from excavation of foundation trenches within a lead of 50 M and lift of 1.5 M all complete as per bullding specification and direction of E/l.(mode of measurementcompacted volume) |
| 9 | Providingdesignation 100 A brick workwithfly ash lime brlck (FLAG) confirming to IS 42894-1990 (9\"x4.5\"x3\") in C.M. (1:6) in superstructure with approved quality of clean coarse sand ofF.M.2 to2.5 includingproviding10mm thick mortar joints, cost of screeningmaterials, raking out joints to15mm depth curing, taxes and royalty allcomplete as per building specification and direction of E/I. |
| 10 | Providing designation 112mm thick reinforcement designation100Abrickworkwithflyashlimebrick (FLAG) confirming to IS 12894-1990 (9\"x4.5\"x3\")in C.M. (1:4) in supertructure with approved qualityof clean coarse sand of F.M. 2 to 2.5 including cost of screening materials scaffolding raking out jointsto 15mm depth curing taxes and royalty ( but excluding the cost of reinforcement) all complete as per building specification and direction of E/1. |
| 11 | Reinforced cement concrete work in wall (any thickness) including attached pilaster, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, postsand struts etc, above plinth upto floor five level, but excluding cost of reinforcement, centering, shuttering and finishing as per building specification and direction of E/I. for R.C.C M-200 in (1:1.5:3) above plinth to 5 level |
| 12 | Reinforcedcement concreteworkin beams, suspended floors, roofs having slope up to 15landings, balconies, shelves, chajjas, lintels, bands,plain window sills, stair cases and spiral stair cases above plinth level up to floor five level but excluding cost of reinforcement, centering shuftering and finishing as per building specificationand direction ofE/I. for R.C.C M-200In(1:1.5:3) Above Plinth to 5 LevelSlab First Floor |
| 13 | ProvidingM.S.Steelreinforcement8 mmdia rods as per approveddesignanddrawingincludingcarriage ofM.S. barsto work site cutting, bendingand binding with annealedwire costofwire,removalofrust,placingthe rods in position all complete as per building specification and diréction of E/I (@15% of total Reinforcement) |
| 14 | Providing M.S.Steel reinforcement10 mm dia rods as per approved design and drawing including carriageof M.S.bars to work site cutting, bending and binding with annealedwire cost of wire,removalofrust, placing the rods in position all complete as per bullding specification and direction of E/I (@20% of total Reinforcement) |
| 15 | Providing M.S.Steel reinforcement12 mm to 20 mm dia rods as per approved design and drawing including carriageof M.S.bars to work site cutting, bending and binding with annealedwire cost of wire,removalofrust, placing the rods in position all complete as per bullding specification and direction of E/I (@65% of total Reinforcement) |
| 16 | ProvidingCentering and shutteringincludingstrutting, propping etc.and removal of form forFoundations, footings, bases of columns, etc.for mass concrete |
| 17 | ProvidingCentering and shutteringincludingstrutting, propping etc.and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts |
| 18 | ProvidingCentering and shutteringincludingstrutting, propping etc.and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 19 | ProvidingCentering and shutteringincludingstrutting, propping etc.and removal of form for Walls (any Thickness) including attached pilasters, butteresses, plinth and string courses etc. |
| 20 | ProvidingCentering and shutteringincludingstrutting, propping etc.and removal of form for uspendedfloors roofs, landings, balconies and access platform |
| 21 | Providing 12mm water proof cement Plaster in cm (1:3) in top of roof with clean coarse sand of F.M.1.5 with 5% cico or any other approved water proofng compound including cost of screening, curing with all leads and lifts of water, scaffolding, taxes and royalty all complete as per building speci\"ficafion and direction of E/I |
| 22 | Providing 6mm cement Plaster in cm (1:4) in ceiling with clean coarse sand of F.M.1.5 including cost of screening, curing with all leads and lifts of water, scaffolding, taxes and royalty all complete as per building speci\"ficafion and direction of E/I |
| 23 | Providing 12 mm cement Plaster in cm (1:6) in both side wall with clean coarse sand of F.M.1.5 including cost of screening, curing with all leads and lifts of water, scaffolding, taxes and royalty all complete as per building speci\"ficafion and direction of E/I |
| 24 | Supplying, fitting and fixing 35mm thick solid core type non- decorative single leaf flush shutters in doors and windows with black board core blendedwith high quality phenol formal dehyde syntheticresin both side commercial veneered of standard make with oxidised iron fittings as per approved design all complete as per building speci\"ficafion and direction of E/I |
| 25 | Provindingandfixingwoodenmouldedbeadingto door and windowframeswith ironscrews, plugeand priming coat on unexposed surface etc. Complete. (50x20 mm) |
| 26 | Providing and fixing bright finished brass 100 mm mortice latch and lock ISI marked with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS: 1868) aluminium leyel handles of approved quality with necessary screws etc. complete. |
| 27 | Providing and fixing aIuminium hanging floor door stopperISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessaryscrewsetc. Compléte. |
| 28 | Providingandfixingaluminiumextrudedsectionbody (having brand logo with ISI, IS: 3564 embossed on the body door weight upto 36 kg lo 80 kg and door width from 701 mm to 1000 mm) with double speed adjustment with necessary accessories and screws etc. complete. |
| 29 | Providing and fixing pressed steel door frames confirming toIS:4351manufacturedfromcommercialmildsteel sheet of 1.60mm thicknessincludinghingesjamb,lock jamb beadand ifrequiredangle thresholdof mildsteel angle of section 50 X 25mm, or base ties of 1.60 mm pressedmild steel welded or rigidly fixed together by mechanical means including M.S pressed butthinges 2.5mm thick with mortar guards, lockstrike plate and shock absorbers as specified and applyinga coat of approved steel primer after pre treatment of the surface as directed direction of E/I. |
| 30 | SupplyingfittingandfixingM.S.Grillmadeof206 mmM.S.flats as per approved design and drawingproperly fabricated with joints continuous fillet welded and finished smooth, carriage of grill to work site, hoisling as per building specification and direction of E/I. |
| 31 | Structural steelworkinsinglesection, fixed withor without connecting plate, including cutting, hoisting fixing in position and applying a priming coat of approved steel primer all complete. |
| 32 | Suppliying, fitting and fixing callapsible gate of” approved size and make rpopoerly fabricated wilh vertical doublechannels20x10x2mmat100mmcentresand bracedwithM.Sflatdiagonals20x3mmwithtopand boltomrailsof T iron 40x40x6mmwith30mm dia, steel pulleyscomplefew‹th bolts,nutslocking arrrangements, stoppers, handls, including applying a priming coat or red lead paints, car riage, hoisting and taxes all comqjele as per building specification and direction of E/I. |
| 33 | Providingand fixing aluminiumwork fordoors, windows,tubular sections/ appropriate Z section and olher sections ofapprovedInaneconformingto IS:733andIS: 1285 fixing with dash fasteners of required dia andsize including necessaryfilling up the gaps at junctions, i.e at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminiumsection shall be srrioolh rust free, slraight, mitred and jointed mechanically wherever required inUuding cleat angle, Aluminium snap beadingforglazing/panelingC.Pbrass/stainlessstee screws all compleled as per specification and direction o E/l (Powder coated aluminium mimimun thicknessof powder coating 60 micron) |
| 34 | Providing and fixing aluminium shutter of doors, windows, ventilators including hinges/ pivols and making provision for fixing of fittings wherever required including Ihe cost o EPDM rubber/ neoprene gasket required. (Fitting shall be |
| 35 | Supplying fitting and fixing glass panes includingsupplying putty. Beads and nails after taking out old and brokenglass panes and disposalof debrisall complete as per building specification and direction of E/l. (5.5 mm plain) |
| 36 | Providing single leyer Narla- tiles in roof including cost ofalllabourandmateñals,laxes,allcopleteasper building specificaton and direclion of E/I. |
| 37 | Providingandlaying25mmthickkotahstoneslab flooring of approved size texure and colour over 19mm thick base of lime mortar {1:1:1) (limeputty:surkhi:coarse eand) laid over and jointed with 9rey cement slurry mixed wifh pigment lo match the shade of slab including rubbing and polishingto granolithicfinish wiffi approved quality of carborandumstoneIncludingcostofcurlng,taxesand royaltyallcompleteasperbuildingspecificalionand direction of E/I. (iv) 600X600 mm size |
| 38 | Providing and laying 25mm thick hotah stone tiles in risers of steps skirting and pillars ot approved size texure and colour laid over 12mm tlnick cement mortar (1;30 and joinedwithgreycementslurrymixadwithpigmentto match theshadeoftheslabincludingrubbingto granollthicfinishwithapprovedqualityofcarborandum stoneincludingcostofcuring,taxesandroyalall completeasperbuildingspecificationanddirecfionol E/I. |
| 39 | Providingand layingDoublechargevitrified floor tiIes in different sizes(thickness to be specified by the manufacturer) with water absorptionless than 0.08% and conformingto IS: 5622 I trio 13006 of aqgrovedmortar 1:4(1 cement : 4 coame sand), jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joints with white cement and matching pigments etc., all completeSize of Tile 600x600 mm . |
| 40 | ProvidingandlayingCeramicglazedfloortilesof size 300x300 mm Thickness to be specifiedbythe manufacturerof 1st qualify conforminglo IS: 15622of approved make in colours such as white Ivory Grey Fume RedBrownlaidon20mmthickcementmortar(1:4) jo1nling with grey cement slurry @ 3.3 kg/sqm Including pointed the ¡oint wilh while cement and matching pigment etc. complete including cost of curing,taxes and royalty as per building specification Engineer in charge. |
| 41 | Providing and laying 1st quality Ceramic glazed wall tile thickness to be specified by the manufacturer in wall over 12mm cement mortar (1:3) and jointed with grey cement slurry flush pointed with whitecemenl including rubbing polishing and cost of curing, taxes and royalty all complete as per building specificationanddirectionol E/I. |
| 42 | Providingand fixing Granile18mm thickgangsaw cut,mirrorpolished,premouldedandprepolished,machine cut for flooring. Kitchen platforms, sanity counters, window sillls, facias and similar locations of required size approved shade, colour and texture laid over 20 mm Ihicfi base cement mortar (1:4) joinls treated with white cement, miKed wilh malching plgment, epoxytouch ups including rubbing, curing moulding and polishing to edges to give high gloss finish elc. complete at all level. (Granite of any colour and shade Area of slab over 0.50 Sq.M) |
| 43 | Providing and applyingwhitecement basedputtyof average thickness 1 mm of approved brand and manufacturer, over the plastered wall surface to prepare Ihe surface even and smooth complete. |
| 44 | Providing two coats of oil bound distemper of approved shade and make over a coat of cement primer over new surface including preparing the plastered surface by rubbing smooth with pumic stone or fine sand paper applying putty wherever required, scaffolding washing of floors and taxes all complete as per building specifications and direction of E/I. |
| 45 | Finishing walls with Acrylic Smooth exterior paintof required shade, New work ( Two or more coat applied @ 1.67 ltr./10 sqm over andincludingpriming coatof exterior primer applied @ 2.20 kg/10 sqm) |
| 46 | Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections. Lump sum |
| 47 | Finishingwalls with Acrylic Smooth exterior LocalArt paint of required shade, New work (Two or morecoat applied over and including priming coat of exterior primer applied as per E/I) Lump sum |
| 48 | Provding two coats of syntheticEnamel paintof approved shade and make over steel surfaceincluding cleaningthesurface thoroughly costofscaffolding and taxes all complete as per building specification and direction of E/I. |
| 49 | Providing two coats of synthetic Enamel Paint of approved shade and make over new Wooden surface including preparing the surface after removing dirt, scales, grease and sand papering, including cost of scaffolding etc. all complete as per building specification and direction of E/I |
| 50 | Making plinth protectlon 50mm thick of cement concrete 1:3:6 (1cement: 3coarse sand 6 graded stone aggregate 20 mm nominal size)over 75mmthick bed of dry brick ballast 40 mm nominal size, wet rammed and consolidated and grouted with fine sand,including necessary excavation, levelling & dressing& finishing the top smooth. |
| 51 | Providing and fixing circular/ Hexagona)cast iron or M.S 73 mm height,top lid of 1.5 mm thick M.S sheet with its topsurfacehackedforproperbonding,toplid shall be screwedintothe castiron/ IVi.Ssfieet box by means of 3.3 mm dia round headedscrews, one lock at the corners. Clamp shall be made of 12 mm dia M.S bar bent to shape as per standard drawing. |
| 52 | Providing 12mm thick cement Plaster in cm (1:3) with punning in top of roof with clean coarse sand of F.M.1.5 with 5% cico or any other approved water proofng compound including cost of screening, curing with all leads and lifts of water, scaffolding, taxes and royalty all complete as per building speci\"ficafion and direction of E/I |
| 53 | Add Carriage cost (a) Cement & Steel from Lead Upto 15Km |
| 54 | (b)Sand from ) = 30 Km |
| 55 | (c) Stone Chips from= 30 Km |
| 56 | (d) Brick from = 10 Km |
| 57 | 200/150mm dia DeepborewellSupplyingall materials, labours, tools 6 equipments for drilling 200/150diaBorewellin anykindofsoil/rockbyusing DTHsupperRig Machineand bell hammertechnology incluslveofmolillisationdemolillsation ofrig air compressorall accessories tools and plants labour etc includingof transportation chargesuptothesife8 al complete job as per direction of E/l. (a) From 0.00 M to 50.00 M below G.L. |
| 58 | (b) From 50.00 M to 125.00 M |
| 59 | Supplyingassembling,loweringandfixinginverticapositioninborewellunplasticizedPVCmediumwel casingpipeofrequireddia.conformingtoIS:12818 includingrequired hire labour chargesfitting ß accessoriesetc.allcompleteforalldepthsasper direction of E/I. (200 mm nominal size dia) |
| 60 | Developmentof tube well ìn accordancewith IS: 2800 (part-I)andIS:11189toestablishmaximumrateof usable waleryield withoutsandcontent(beyond permissiblelimit)withrequiredcapacityaircompressor, running the compressorfor required time till well isfully developed measuring yield of well by \"V\" notch method or anyotherapproved methodmeasuringstatic level & drawdownetc.bystepdrawdownmethodcollecting watersamples&gettingtestedinapprovedlaboratory i/c disinfectionof tubewell all complete including hire & labour charge of air compressortools & accessoriesetc all as per requirement and direction of E/I. |
| 61 | Providingandfixingsuitablesizethreadedmildsteecap or spot welded plate to the top of bore well housing/casing pipe removableas per requirementall complete for borewell of 200 mm dia. |
| 62 | Providing and fixing M.S clamp of required dia to the topof casing/ housing pipe of tubewell as per IS: 2800 (part I)includingnecessarybolts&nutsofrequiredsize complete200 mm dia. |
| 63 | Supplying100mm diaSubmersiblepumpsets confirmingto8034andmotorconfirmingtoIS:9283 pumpshellbesuitableforvariousdeliveryheadand dischargewithstainlesssteelpumpsheftand polypropylene/ noryl impeller. Motor suitable for working on 415 + 0, 3HP, 50 Hz, DCsupplywith cable guard, thurst carbon/ fiber bearing to withstand entire hydraulic thurst, water proof winding shall be provided. The pump setshall be suitablefor diretcoupling pump shall have suitable outlet as per manufacturersdesign.Anti thurst streamlinednonreturnvalveshallbeprovidedwith pump,3metersubmersiblecopperconductorcable in single/doublerunshellbeprovidedwitheachpump. Submersible pump set 100 mm dia (with polypropylene/ noryl impeller) up to 20 stages 2HP S.Pump |
| 64 | Supplyfittingandfittingofstandaredmake2.00HP submersible pump starter Pannel Board with arrangementofallnecessaryprotection,includingal taxes, all complete job as per direction of E/I. |
| 65 | Supplyingfitting and fixing 3 crore 4 sq.mm flat copper submersible cable of Finolex/Hevels make includingalltaxesetc.allcompletejobasper |
| 66 | Supplyfittingandfixinglowering40mmdiaG.Icollumnpipe includingof requiredfittings,solvent etc completed as per direction of E/l. |
| 67 | Supplying,fitting&fixingvitrcouswhiteglazedearthen ware I.W.C. of parry Hindustan or any other I.S.S. approvedmakewith 100mm.H.C.I.\"P\"trap15litres C.I. PullandletgoflushingcisternofnamesorotherI.S.S EquipmentmakecompletewithallfittingsC.IorC.C brackets 32mm alkathene/PVC. telescopic flush,pipe about 2M long with one brass coupling & clamps G.I.Chain&pullincludingsupplying&fixingapairof vitreous white glazed earthen ware footrest to be fixed in floor 15mm C.I.body brass spindle stopper cock of weight not less than 50 gms 15mm PVC Connection pipe 450mmlongandtheexposedpipe&cisternwithtwo coatsof approvedpaint overacoat ofred oxide primer etc.all completeasperspecification&directionofE/l (White Vitreous China Orissa pattern W C pan of size 580 X 440 mm with integral type foot rest.) |
| 68 | Supplying,fitting& fixing40mmhighvitrcous white glazed earthen E.W.C. with \"P’ trap of parry Hindustanor anyotherI.S.S.approvedmakeincludingsupplying& fixing15litresC.IMosquito prooflowdownflushing cisternofapprovedmakewithcompletefittingwithC.I. handle and R.S or brackets with telescopic fIush,pipe with brass couplingand plumbersjointsspindlestopcockof approved quality weight not less than 450 grams 15 mmP.V.Calkathenepipe45cmlongwithbrasscouplingat bothendsandwhite/blackplasticsoidstatesealand lead of commander/cuckoo or other I.S.S make withhingesorscrewsetc.paintingpipe and cisternetc. with2 coatsofapprovedpainoveracoatofredoxide priming all complete as per specification & direction of E/l (WhiteVitreousChinaOrissapatternE.W.CPan of approved size) |
| 69 | ProvidingandfixingWashbasinwithC.I/M.Sbrackets, 15mmC.P. Brasspillartaps32mmC.P brasswasteof standard pattern,including painting of fittings and brackets,cuttingandmakinggoodthewallswtherever require.(3) white vitreous china wash basin size 550x400 mmwith a pair of t5mm C.P brass pillar tags. |
| 70 | Supplying,fittingandfixingthefollowingitemcomplete with all materials as per specification and direction of E/I(a) Glass shelf with C.P brass rail(i) 600 x 125 mm glass shelf complete. |
| 71 | ProvidingandfixingPTMTBottleTrapforWashBasin andsinkbottletrap31mmsinglepiecemouldedwith heightof270mmeffectivelengthoftailpipe260mm from the centre of the waste coupling 7Z mm Isreadth with 25 mm minimumwaterseal, weighingnot less than 260 |
| 72 | Providing and fixing PTMT Liquid Soap container 109 mm wide,125mmhighand112mmdistancefromwallof standardshape with bracketofthesamematerialswith snapfitting ofapprovedqualityand colourweightingnot less than 105s |
| 73 | Providing and fixing PTMT Towel Ring trapezoidal shape 215 mm long 200 mm wide with minimum distance of 37 mm from wall face with concealed flttings arrangement of approvedqualityandcolour weighing not less than 88gms. |
| 74 | ProvidingandfixingC.P.Brassbibcockofapproved quality conforming to IS: 8931 |
| 75 | ProvidingandfixingC.P.Brassanglevalveforbasin mixer and geyser points of approved quality conforming to IS: 8931(a) 15 mm nominal bore |
| 76 | Providing and fixing Toilet Paper Holder of C.P. Brass |
| 77 | Internal Plumbing Work Providing and fixing on wall face unplasticised Rigid PVC rain water pipe conforming to IS: 13592 Type A, including jointing withseal ring conforming to IS:5382, leaving10 mm gap for thermal expansion. (i) Single socketed pipes.(1) 75 mm diameter |
| 78 | 110 mm diameter |
| 79 | Providing andfixingonwallfaceunplasticised PVC mouidedfittings/ accessoriesfor unplasticised Rigid PVC rain water pipes conforming to IS: 13582 Type A, includingjointingwithsealringconformingtoiS:5382, leaving 10 mm gap for thermal expansion.(1) 110 mm diameter |
| 80 | Single tee with door 110x110x110 mm |
| 81 | Bend 87.5 dgree |
| 82 | Shoe Plain |
| 83 | ProvidingandfixingunplasticisedPVCpipesclipsof approved design to unplasticised PVC rain water pipe by means of50x50x50mm hard wood plugs,screwedwith M.Sscrewsofrequiredlength,includingcuttingbrick workand fixing in cement mortar (J:4) and making good the wall etc. complete.(1)75mm dia. |
| 84 | 110 mm diameter |
| 85 | Providing and lixingCPVC pipes having thermalstability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamps at 1.00 mt spacing this includingjointing of pipes andfittingswithonestepCPVCsolventcementand testing of joints complete as per the direection of engineer incharge. Internal work- Exposed on wall.(2) 20mm nominal outer dia pipes |
| 86 | 25mm nominal outer dia pipes |
| 87 | 32mm nominal outer dia pipes |
| 88 | 40mm nominal outer dia pipes |
| 89 | 50mm nominal outer dia pipes |
| 90 | Providingand fixing CPVC pipes having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamps at 1.00 mt spacing this includingjionting of pipes A nd fittin9Swith one step CPVCsolvent cementand the costofcuttingchasesandmakinggoodthewallsame includingtestingofjoints completeas perthe direection ofengineerincharge.Conceealedworkincludingcutting chase and making good the wall etc.(1)15mm nominal outer dia pipes |
| 91 | 20mm nominal outer dia pipes |
| 92 | 25mm nominal outer dia pipes |
| 93 | 32mm nominal outer dia pipes |
| 94 | Providing and fixing in position 25 mm diameter mosquito proof couplig of approved municipal design. |
| 95 | Providing andplacing onterrace (at all floor levels)polyethylenewaterstoragetankIsl: 1270Jmarked,with cover and suitable locking arrangement andmakingnecessaryholesforinlet,outletandoverflowpipesbut without fitting and lhe base support for tank. |
| 96 | Wiring for light point/ fan point/exhaustfan point / call bell point with 1.5 sq.mm FRPVC insulated copper conductor singlecore cablein surface/recessed PVCconduit,with modular switch ,modular plate, suitable GI box and earthing thepointwith1.5sqmmFR PVCinsulatad copper conductor single core cable etc as required. |
| 97 | Wiringforlight/power plug with2x4sq.mmFRPVC insulated,copperconductor,singlecore cablein surface /recessed PVC conduit along along with 1 No. 4 sq mm FR PVC insulated copper conductor single core cable for loop earttyng as requried . |
| 98 | Wiringforlight/power plug with4X4 sq.mmFRPVC insulated, copperconductor,singlecorecable in surface /recessed PVC conduitalong along with 2 No. 4 sq mm FR PVC insulated copper conductor single core cable for loop earthing as requried |
| 99 | Wiringforcircuit/submainwiringalongwithearthwire with the following sizes ofPVC insulated, copper conductor,singlecorecableinsurface/recessedPVC 2X1.5 sq mm +1 x 1.5sq mm earth wire. |
| 100 | 2X2.5 sq mm +1 x 2.5sq mm earth wire. |
| 101 | 4 X 2.5 sq mm +2 x 2.5 sq mm earth wire. |
| 102 | 4 X .10 sq mm +2 x 6 sq mm earth wire. |
| 103 | Supplying and drawing co-axial TV cable RG-6 grade, 0.7mmsolidcopperconductorPEinsulated,shieldedwith final tinned copper braid and protected with PVC sheath in theexisting surface/ recessed steel/ PVC conduitas |
| 104 | S/F of following sizesof PVC conduit alongwith the accessoriesinsurface/recessincludingcuttingthewall and making good the same in case of recessed conduit asrequired. 20 mm PVC coduit |
| 105 | 25 mm PVC coduit |
| 106 | Supplingand fixing followingmodulertypeswitch /socket ontheexisting modularplate&switchboxincluding connection but excluding modular plate etc. as required. 5/6 amps one way switch |
| 107 | 5l16 amps one way switch |
| 108 | 5/6 amps 3 pin socket outlet |
| 109 | 15/16 amps 6 pin socket outlet |
| 110 | TV anteena Socket outlet |
| 111 | S/Fsteppedtubeelectronicfanregularontheexisting plate switch box including connection but excluding modular plate etc. as required. |
| 112 | S/F modular blanking plate on the existing modular plate & switch box excluding modular plate as required. |
| 113 | Supplying and fixing followingsize/ modules, GI box along with modulerbase&cover plateformodularswitches in recess etc. as required. 1 or 2 module (78x78x45 mm) for Telephone & TV outlet. |
| 114 | 4/5 module (78x140x50 mm) |
| 115 | 6 module (78x205x50 mm) |
| 116 | SQL- 2 pin 5 amp Ceiling rose on the existing junction Box/ wooden block including connection etc. as required. |
| 117 | S/F Brass batto/Angle Holder including connection etc. as required. |
| 118 | S/FDingdongsoundcallbellsinglephase230volts complete as required. |
| 119 | Installation, testing andcommissioning ofceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. Mm FR PVC insulated, copper conductor single core cable etc. As required. |
| 120 | Installation ofexhaustfanup450 mm sweep inthe existing opening including making the hole to suit the size ofabovethefan, makinggoodthe damage,connection testing, commissioning etc. As required. |
| 121 | Providingandfixing20amps,240volts,SPNindustrial type,socket outlet, with 2 pole and eailh, metal enclosed plug top alongwith 20 amps \"C\" curve, SP, MCB, in sheet steëlenclosure,onsurfaceorinrecess,withchained metalcoverforthesocketoutletandcompletewith connections, testing and commissioning etc. as required. |
| 122 | Providingandfixingoffollowingways,horizontal type three pole andneutral, sheet steel, MCB distribution board, 415 volts, on Jul-tacel recess, complete with tinned copperbusbar,neutral busbar,earthbar,dinbar interconnections,powderpaintedincludingearthingetc as required. (But with out MCB/RCCB/lsolator)(6) 8 way (4+24),DoubIe Door Horizontal Type |
| 123 | Providing and fixing 6 Amp to 32 Amp rating 240 volts, 10 KV \"C\" Curve Miniature Circuit Breaker suitable for inductiveloadsoffollowingpolesinthexistingMCBDB completewithconnections,testingandcommissioning etc. As required. |
| 124 | 40 Amp TPN |
| 125 | Providing and fixing of following rating double pole (Single pole & neutral), 240 volts, resudual current circuit breaker (RCCB),having asensivitycurrent30 miliamperein the existingMCBDBcompletewithconnection,testing& commissioningetc. As required. (2) 40 Amps |
| 126 | Earthing withG.I earth plate 600 ITU K 600mm x 6mm thickincludingaccessories,and providingmasonry enclosurewithcoverplatehavinglockingarrangement and watering pipe etc. (with charcoal or coke and salt) as |
| 127 | Providing and fixing 25 mm x 5 mm G.I strip on surface or in recess for connections etc. As required. |
| 128 | Providing and fixing 6 SWG dia. G.l wire on surface or in recess for loop earthing alongwith existing surface/recessed conduit/ submain wiring/ cable as required. |
| 129 | Supply ofXLPEinsulated PVCsheathedheavy duty,armouredelectricalcablewithaluminiumconductorfor workingvoltageuptoandincluding1100volts. (conforming to IS- 7098. Part-1) 4 core, 16 sq,mm |
| 130 | Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in theexisting surface/ recessedsteel/PVCconduitU S required.(1) run of cable |
| 131 | Layingof one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of following size direct ingroundincludingexcavation, sandcushioning, protective covering and refilling the trench etc. as |
| 132 | Supplyingand makingend terminationwith brass compressionglandand aluminiumlugsfor followingsize ofPVCinsulatedandPVCsheathed/XLPEaluminium conductor cable of 1.1 KV grade as required.(33) 4 x 16 sq. Mm (28mm) |
| 133 | SITCoffollowingratingrecess/surfacemountedLED round/squareshapedownlightluminariewithpressure die cast housingfor single phase supply voltage Luminarieshall be confirm to IS: 10322 part - 5/ section -2orIEC:62722 withallneccessary accessories as required. Make:- Havells/ Philips/ Crompton/ Wipro.(4) 18/20 W LED Round Down Light (Surface) |
| 134 | Bulk Head fitting with 9/10 Watt LED |
| 135 | S.I.T.CoffollowingratingsurfacemountedLEDTube LightingFittingSuitablefor230V,50Hz,SinglePhase Supply etc. Complete as required. 10/12 W LED Tube Light |
| 136 | 20/22 W LED Tube Light |
| 137 | SITEof300 mm (12\") Exhaustfan (Metal body)suitable forsinglephase230volts,50Hz,ACsupplycomplete withmotor,louvers/shuttersetc.Completeasrequired.Make :- Usha/Crompton/Havells. |
| 138 | Supply,Installation,TestingandCommissioningof followingsizefan3Bladesconfirming toIS:374:2019 includingwiringthedownrodsofstrandedfor230V50 Hz, single phase supply etc. complete as required. (3)1200mm (48\") BLDC5 Star rating 32W Ceiling Fan of approved make etc. without regulator |
| 139 | Goods & Service Tax (G.S.T.) - @18% |
| 140 | Labour Cess - @1% |
AI Tender Summary
Tender Timeline
Apr 12, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedApr 18, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedApr 21, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender