Military Engineer Services-MES has published Tender For Repair/Replacement Of Summer Appliances , Ceiling Fan/Exhaust Fan/Wall Fan And Misc Fitting Fixture Work Under Ge Amritsar. Submission Date for this Tender is 09-05-2023. Air Conditioner Tenders in amritsar Punjab. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 02-May-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 09-05-2023 |
| Sl. No. | Item Description |
| 1 | AIR CONDITIONER Taking downfor servicingof window/split type AC 1.5/2/2.5/4.0/5.0 TR Capacityincludingjet washing ,cleaning of cooling coil, air filters/plasma filters etc, (Indoor unit), condenser, compressors, fan motor etc,(Out door unit) with vacuum cleaner OR cleaning solution includingcheckingthe serviceability of electrical/electronic circuits relays, wiring kit, thermostat switches knobs, Remote control unit, fan, blower, etc.,and keepingthe AC unit in satisfactory working condition after necessary servicing/ replacement/ replacement of defective spares as required and refixing the same in existing position complete all specified and as directed by Engineer-in-Charge. |
| 2 | Supply, fixing and connecting of new compressor of capacity 1.5 Ton for window/split type, medium temperature suitable for air conditioner of any make/type including replacement of foundation bolts, rubber pad, strainer capillary tubes, suction and discharge pipe line, wiring kit, Gas charging (/R-134A/R-410A) and detect of leakage etc. and testing of new sealed unit compressoralongwith test certificate from manufacturer andone yearguarantee certificate complete all as specified and directed by Engineer-in-charge. |
| 3 | Supply, fixing and connecting of new compressor of 2.0 TO 2.5 Ton capacity for window/split type, medium temperature suitable for air conditioner of any make/type including replacement of foundation bolts, rubber pad, strainer capillary tubes, suction and discharge pipe line, wiring kit, Gas charging (/R-134A/R-410A) and detect of leakage etc. and testing of new sealed unit compressoralongwith test certificate from manufacturer andone yearguarantee certificate complete all as specified and directed by Engineer-in-charge. |
| 4 | Supply, fixing and connecting of scroll type compressor of 4.0 to 5.5Ton capacity for window/split type, medium temperature suitable for air conditioner of any make/type including replacement of foundation bolts, rubber pad, strainer capillary tubes, suction and discharge pipe line, wiring kit, Gas charging (/R-134A/R-410A) and detect of leakage etc. and testing of new sealed unit compressoralongwith test certificate from manufacturer andone yearguarantee certificate complete all as specified and directed by Engineer-in-charge. |
| 5 | Taking down and Gas Charging of Air Conditioner window/split type of capacity 1.5/2.0 Ton with (R-22/R-32/R-134A/R-410A) or any other typegas including replacement of connection lead, tin coated copper thimbles, detecting of leakage and installation of AC at site and testing on full load for 24 hours continuously including detecting of gas leakage and rectifying it by gas welding orby any other means and cutting,brazing of copper tubecomplete all as specified and directed by Engineer-in-charge. Note : Gas charging once carried out by the contractor , in case of gas leakage if gas refilling required again thenthecost of refilling will be beared by the contractor. |
| 6 | Taking down and Gas Charging of 4.0 to 5.5 Ton capacity of cassett type/ductable AC. with (R-22/R-32/R-134A/R-410A) or any other typegas including replacement of connection lead, tin coated copper thimbles, detecting of leakage and installation of AC at site and testing on full load for 24 hours continuously including detecting of gas leakage and rectifying it by gas welding orby any other means and cutting,brazing of copper tubecomplete all as specified and directed by Engineer-in-charge. Note : Gas charging once carried out by the contractor , in case of gas leakage if gas refilling required again thenthecost of refilling will be beared by the contractor. |
| 7 | Taking down blower motor from air conditioner of 1.5 / 2.5 Ton capacity and any make split / Window type and replacing the new motor, single phase, 230 volt, 50 Hz, 1/5 HP capacity, in the same position, testing etc complete all as specified and directed by Engineer-in-charge. |
| 8 | Taking down blower motor from air conditioner of4.0/5.5 Ton capacity of cassette / air cooled ductable type and replacing the new motor, single phase, 230 volt, 50 Hz, 1/5 HP capacity, in the same position, testing etc complete all as specified and directed by Engineer-in-charge. |
| 9 | Supply and fixing, in replacement, of Starting/Running capacitor suitable for air conditioner of any make / type / capacity including making connection etc complete all as specified and directed by Engineer-in-Charge. |
| 10 | Supply and fixing, in replacement, of thermostat switch of temperature range of 17°C to 30°C suitable for air conditioner of any make / type / capacity including making connection etc complete all as specified and directed by Engineer-in-Charge. |
| 11 | Supply and fixing, in replacement, offront grill with knob made of fiber plastic body suitable for window type AC of any make / type / capacity complete all as specified and directed by Engineer-in-Charge. |
| 12 | Supply and fixing of factory made wall mounted/floor mounted type AC outdoor unit stand of superior quality duly coloured with two coat of synthetic enamel paint ( 1st grade quality) over a coat of red oxide zinc chrome primer. suitable for AC of 1.5 to 5 Ton capacity complete all as specified and directed.suitable size and grouting on wall or floor complete all as specified and directed by Engineer-in-Charge. |
| 13 | Supply and fixing, in replacement, of starting relay suitable for air conditioner of any make / type / capacity including making connection etc complete all as specified and directed by Engineer-in-Charge. |
| 14 | Supply and fixing in replacement of out door unit complete for 1.5 Ton/2 Ton split type AC including fan motor andcondensor coilof make as approved by GE, complete all as specified and directed. Note - All credit to be deposited to MES yard. It will be given to contractor after completion of work. |
| 15 | Supply and fixing, in replacement, of fan motor ISI marked for outdoor unit of split type air conditioner of any make / type and capacity including making connection etc complete all as specified and directed by Engineer-in-Charge. |
| 16 | Supply and fixing in replacementof electronic control circuit card suitable for air conditioner of any make / type and 1.5 / 2.0/2.5 ton capacity including making connection etc complete all as specified and directed by Engineer-in-Charge. |
| 17 | Replacementof electronic control circuit card suitable for air conditioner of any make / type and 1.5 / 2.0/2.5 ton capacity including making connection etc complete all as specified and directed by Engineer-in-Charge. |
| 18 | Supply and fixing in replacement, of electronic control circuit with remote suitable for air cooled ductable type air conditioner of 4.0/ 5.0 ton capacity including making connection etc complete all as specified and directed by Engineer-in-Charge. |
| 19 | Replacement of electronic control circuit with remote suitable for air cooled ductable type air conditioner of 4.0/ 5.0 ton capacity including making connection etc complete all as specified and directed by Engineer-in-Charge. |
| 20 | Material and Labour for scraping of old paint by wire brush frombody of window type/Split AC of any capacity and applying base material for smooth surface and applying2 coat of synthetic enameled spray paint over one coat of primer complete all as specified and directed by Engineer-in-Charge. |
| 21 | Material and Labour for removing the old outer body and supply and fixing complete new outer body of existing size/shape for window type AC complete all as specified and directed by Engineer-in-Charge. |
| 22 | Material and Labour for sub main wiring with PVC insulated, 1100 volts grade single core multistranded copper conductor FR cable conforming to IS specifications, 2 runs of 2.5 sqmm including 1 run of 2.5 sq mmsingle core multistranded copper conductor,PVC insulated cables as earth continuity conductor drawn through and including one run of 25 mm dia rigid PVC conduit and conduit accessories fixed on wall/ceiling etc., or concealed in wall and connecting to common earth dolly including taking down all sub main wiring complete all as specified and directed by Engineer-in-Charge. Note :2 Run of 2.5 sqmm,1 Run of 2.5 sq mm and 1 run of PVC conduit will bemesuared as 1 unit. |
| 23 | Material and Labour for sub main wiring with PVC insulated, 1100 volts grade single core multistranded copper conductor cable conforming to IS specifications, 2 runs of 4 sqmm including 1 run of 4 sq mmsingle core multistranded copper conductor,PVC insulated cables as earth continuity conductor drawn through and including one run of 25 mm dia rigid PVC conduit and conduit accessories fixed on wall/ceiling etc., or concealed in wall and connecting to common earth dollyincluding taking down all sub main wiring complete all as specified and directed by Engineer-in-Charge. Note :2 Run of 4 sqmm,1 Run of 4 sq mm and 1 run of PVC conduit will bemesuared as 1 unit. |
| 24 | Supply and fixing in replacement of Evaporaror/Condenser cooling coil of copper 1.5 ton /2 ton split type/WindowAC of suitable make approved by CE WC complete all as specified and directed by Engineer-in-Charge. |
| 25 | REFRIGERATOR Material and Labour for taking out compressor sealed unit from the refrigerator/deep freezer any capacity and make including removal of unserviceable parts/ spares, such as over load protector, strainer capillary tube etc complete all as specified and directed by Engineer-in charge. |
| 26 | Supply, fixing connecting andtestingof new compressor alongwith test certificate from manufacturer andone yearguarantee certificate suitable for refrigerator/deep freezer of capacity 320/ 310/ 280/ 220 ltrs and any make/type, medium temperature range, including replacement of foundation bolts, rubber pad, strainer, capillary tubes, suction and discharge pipe line and subsequentlyGas charging ofgas type as required on site and detect of leakage etc complete all as specified and directed by Engineer-in charge. |
| 27 | Supply, fixing connecting andtestingof new compressor alongwith test certificate from manufacturer andone yearguarantee certificate suitable for refrigerator/deep freezer of capacity 165/180 ltrs. and any make/type, medium temperature range, including replacement of foundation bolts, rubber pad, strainer, capillary tubes, suction and discharge pipe line and subsequentlyGas charging ofgas type as required on site and detect of leakage etc complete all as specified and directed by Engineer-in charge. |
| 28 | Material and Labour for gas charging of refrigerator/deep freezer of any make/type/capacity of anyas required on site type refrigerant gas complete in all respect including installation at site testing of service for 24 hours etc complete all as specified and directed by Engineer-in charge. Note : Gas charging once carried out by the contractor , in case of gas leakage if gas refilling required again thenthecost of refilling will be beared by the contractor. |
| 29 | Supply and fixing of starting relay and overload protector ISI marked suitable for refrigerator/deep freezer of any make/type/capacity including making connection complete all as specified and directed by Engineer-in charge. |
| 30 | Supply and fixing of thermostat switch with knob ISI marked suitable for refrigerator/deep freezer of any make/type/capacity including making connection complete all as specified and directed by Engineer-in charge. |
| 31 | Supply and fixing offreezer suitable for refrigerator of any make/type/capacity including making connection complete all as specified and directed by Engineer-in charge. |
| 32 | Supply and fixing of glass/PVC shelf/cover for vegetable tray suitable for refrigerator/deep freezer of any make/type/capacity including making connection complete all as specified and directed by Engineer-in charge. |
| 33 | Supply and fixing of evaporator coil ISI marked suitable for refrigerator/deep freezer of any make/type/capacity including making connection complete all as specified and directed by Engineer-in charge. |
| 34 | Supply and fixing in replacement of Door Lock with door gasket for refrigerator 165 to 310 ltrs complete all as specified and directed by Engineer-in-Charge. |
| 35 | Supply and fixing in replacement of Interior light fittings with bulb complete all as specified and directed by Engineer-in-Charge. |
| 36 | Supply and fixing in replacement/replacement of printed circuit board for refrigerator of 180/220/300 capacity complete all as specified and directed by Engineer-in-Charge. |
| 37 | Supply and fixing in replacement of heaterfor refrigerator of 180/220/300 capacity complete all as specified and directed by Engineer-in-Charge. |
| 38 | Supply and fixing in replacement of fan motor forrefrigerator/deep freezer of 180/220/310 ltr capacity complete all as specified and directed by Engineer-in-Charge. |
| 39 | Supply and fixing ofcondenser coil ISI marked suitable for refrigerator/deep freezer of any make/type/capacity including making connection complete all as specified and directed by Engineer-in charge. |
| 40 | WATER COOLER Material and Labour for taking out existing unserviceable compressor sealed unit from the water cooler of any make/type/capacity including removing of all other unserviceable parts / spares such as strainer filer, capillary tube, suction / discharge pipe, thermostat switch, float valve, push cock, running capacitor, starting capacitor, over load relay etc reassembling of water cooler and restoring water connection, complete all as specified and directed by Engineer-in charge. NOTE:- The rates for above items are deemed to include for transportation to & fromWater coolers to workshop as approved by Engineer-in-charge for necessary replacement and testing of Water coolers at workshop& replacement of necessary unserviceable screws/nuts/bots/ washers/ packing etc with new one. |
| 41 | Supply, fixing and connecting of new compressor sealed unit suitable for water cooler of any make/type and 150 ltr ,120 ltr/ hr cooling capacity, medium temperature range, including replacement of filter and making connectionand detect of leakage and rectifying it by gas welding or any other means etc including testing of new sealed unit compressoralongwith test certificate from manufacturer andone yearguarantee certificate complete all as specified and directed by Engineer-in charge. |
| 42 | Supply, fixing and connecting of new compressor sealed unit suitable for water cooler of any make/type and 1 40/60, 40/80 ltr/ hr cooling capacity, medium temperature range, including replacement of filter and making connectionand detect of leakage and rectifying it by gas welding or any other means etc including testing of new sealed unit compressoralongwith test certificate from manufacturer andone yearguarantee certificate complete all as specified and directed by Engineer-in charge. |
| 43 | Material and Labour for Gas charging of water cooler of any make/type but of 150/120 ltrs / hr cooling capacity with (R-32/R-134A/R-410A) or any other type refrigerant gas complete in all respect, detect of leakage and rectifying it by gas welding or any other means etc including installation at site, testing of water cooler on full load for 24 hours continuously etc complete all as specified and directed by Engineer-in charge. Note : Gas charging once carried out by the contractor , in case of gas leakage if gas refilling required again thenthecost of refilling will be beared by the contractor. |
| 44 | Material and Labour for Gas charging of water cooler of any make/type but of 40/60 ,40/80ltrs / hr cooling capacity with (R-32/R-134A/R-410A) or any oher type refrigerant gas complete in all respect, detect of leakage and rectifying it by gas welding or any other means etc including installation at site, testing of water cooler on full load for 24 hours continuously etc complete all as specified and directed by Engineer-in charge. Note : Gas charging once carried out by the contractor , in case of gas leakage if gas refilling required again thenthecost of refilling will be beared by the contractor. |
| 45 | Supply, fixing and connecting of new fan motor with blade ISI marked in existing water cooler of any make/type/capacity including all fixing accessories etc complete all as specified and directed by Engineer-in-charge. |
| 46 | Supply, fixing and connecting of Starting/running capacitor ISI marked in existing water cooler of any make/type/capacity including all fixing accessories etc complete all as specified and directed by Engineer-in-charge. |
| 47 | Supply, fixing and connecting of thermostat switch ISI marked in existing water cooler of any make/type/capacity including all fixing accessories etc complete all as specified and directed by Engineer-in-charge. |
| 48 | Supply, fixing and connecting of chromium plated push cock tap, in existing water cooler of any make/type/capacity including all fixing accessories etc complete all as specified and directed by Engineer-in-charge. |
| 49 | Supply, fixing and connecting of PVC heavy duty waste water pipe of 32/40 mm size and min 1.5 mtr long, including replacement of waste water tray in existing water cooler of any make/type/capacity including all fixing accessories etc complete all as specified and directed by Engineer-in-charge. |
| 50 | Supply and fixing of evaporator coil ISI marked suitable for water cooler of any make/type/capacity including all fixing accessories and making connection / detecting leakage and gas charging etc complete all as specified and directed by Engineer-in charge. |
| 51 | Supply and fixing of condenser coil ISI marked suitable for water cooler of any make/type/capacity including all fixing accessories and making connection etc complete all as specified and directed by Engineer-in charge. |
| 52 | Material and labour for replacementing to base/stand of water cooler of any make/type/capacity including welding of MS/GI sheet 16 SWG of suitable size to fill up rusted patches, grinding and applying base material for smooth surface and applying 2 coat of synthetic enameled spray paint of existing colour over one coat of primer etc complete all as specified and directed by Engineer-in-charge. |
| 53 | Material and labour for scraping of old paint / rust etc by wire brush frombody of water cooler of any make/type/capacity and applying base material for smooth surface and applying2 coat of synthetic enameled spray paint over one coat of primer after denting etc complete all as specified and directed by Engineer-in-charge. |
| 54 | Supply and fixing in replacement of Relay/overload protector suitable for water cooler of any size/type as per site requirement complete all as specified and directed by Engineer-in-Charge. |
| 55 | DESERT COOLER Supply, fixing and connecting new fan motor, single phase 230 volt 50 Hz copper wounded three speed suitable for desert cooler of 500 mm sweep size or any other size as per site requirementetc completeincluding dismantling and removing of existing unserviceable fan motor with blades from the desert cooler of any make/type/capacity including removing of all fixing accessories etc and refixing the Fan motor with blades complete all as specified and directed by Engineer-in charge. |
| 56 | Supply, fixing and connecting new submerisble type tullu pump impeller type for desert cooler of capacity 15 to 20 watt, single phase 230 volt 50 Hz copper wound etc incl fixing accessories complete all as specified and directed by Engineer-in charge. |
| 57 | Supply and fixing in replacement of wooden wool pads including wire mesh suitable for 4000/5000 cuf/M complete all as specified and directed by Engineer-in charge. |
| 58 | Material and labour for scratching of old paint and rust by wire brush and applying two coats of spray paint of off white / gray colour over one coat of primer ( red oxide ) including black bitumen paint at in side body of desert cooler complete all as specified and directed by Engineer-in charge. Note : The compressor and spray machine shall be arranged/brought by contractor at E/M yard and no extra cost shall be paid to the contractor in this effect. |
| 59 | Supply and fixing in replacement of selector switchand piano switch for desert cooler,single phase 230 volts, ISI marked complete all as directed by the Engineer-in-Charge. |
| 60 | Supply and fixing in replacement of side grill complete made out of 22 SWG gauge GI sheet including applying two coats of spray paint of off white / gray colour over one coat of primer ( red oxide ) suitable for desert cooler of capacity 4000/5000 cuf/Min complete all as directed by the Engineer-in-Charge. |
| 61 | Supply and fixing in replacement offront grill made out of GI sheet of 20 SWG gauge including applying two coats of spray paint of off white / gray colour over one coat of primer ( red oxide ) suitable for desert cooler of capacity 4000/5000 cuf/Min complete all as directed by the Engineer-in-Charge. |
| 62 | Supply and fixing in replacement of factory made metalic blade suitable for desert cooler of capacity 4000/5000 cuf/Min complete all as directed by the Engineer-in-Charge. |
| 63 | Supply and fixing in replacement of PVC pipe of 15 mm dia with water PVC distribution and PVC elbow complete all as specified and directed by the Engineer-in-Charge. |
| 64 | Supply and fixing in replacement of legs for fan motor made out for 18 SWG MS platecomplete all as specified and directed by the Engineer-in-Charge. |
| 65 | Supply and fixing PVC connection 15 mm size with PTMTnuts of length 600mm complete all as specified and directed by the Engineer-in-Charge. |
| 66 | Supply and fixing ball PVCvalves, high pressure, with polythene float and flynut complete , screwed for iron pipe or brass ferrule bore of pipe 15mm dia complete all as specified and directed by the Engineer-in-Charge. |
| 67 | Supply and fixing galvanized iron steel tubing medium grade 15mm bore with all fittings and fixed to walls, ceiling or on floor fixed with approriate wire including taking down unserviceable pipe complete all as specified and directed by Engineer-in-Charge. |
| 68 | Supplying and fixing MS framed works as in frame of desert cooler of angle or other section with gusset plates, rails, braces etc , including drilling and grouting in wall complete all as specified and directed by Engineer-in-Charge. |
| 69 | Supplyand fixing in replacement of desert cooler body made of20 guage PGI Sheet suitable for evaporative type desert cooler of size 67x67x87 cm including side panel-03 nos and front grill with 20 guage PGI sheet and water tank height 20 cm2.0 mm thick and grill with fins, electriclal wiring and connection with on/off switch piano type,selector switch with distribution PVC cable 3 core 23/0.0076-3m withplug top 5 Amp-01 No,15mm float vlave-01 and legs for motor fixing including duly painted complete body internaly and externaly and all side panel inner and outer side with 2 coat sythetic enamel paint of approved colour over a coat of red oxide primer complete all as specified and directed by Engineer-in-Charge. |
| 70 | Supply and Fixing in replacement 3 pin plug top 5 Amp, 230V for desert cooler complete all as specified and directed by Engineer-in-Charge. |
| 71 | Supply and Fixing in replacement of PVC stop cock suitable for GI tubing of size 15 mm dia complete all as specified and directed by Engineer-in-Charge. |
| 72 | VOLTAGE STABILIZER Material and labour for stripping up of voltage stabilizer and replacing of main transformer 5 KVA capacity with super enameled copper wire of existing gauge including varnishing, heating and refiting (Make : STP/ Devidayal / Chetak) for input variation between 140 volt to 280 volt and output volt of 230 volts, 50 Hz including replacement of main circuit and testing for low and high voltageetc complete all as specified and directed by Engineer-in-charge. |
| 73 | Material and labour for stripping up of voltage stabilizer and replacing of main transformer 3to 4 KVA capacity. with super enameled copper wire of existing gauge including varnishing, heating and refiting (Make : STP/ Devidayal / Chetak) for input variation between 140 volt to 280 volt and output volt of 230 volts, 50 Hz including replacement of main circuit and testing for low and high voltageetc complete all as specified and directed by Engineer-in-charge. |
| 74 | Material and labour for stripping up of voltage stabilizer and replacing of main transformer 0.5 to 2 KVA capacity.. with super enameled copper wire of existing gauge including varnishing, heating and refiting (Make : STP/ Devidayal / Chetak) for input variation between 140 volt to 280 volt and output volt of 230 volts, 50 Hz including replacement of main circuit and testing for low and high voltageetc complete all as specified and directed by Engineer-in-charge. |
| 75 | Supply and fixing in replacement of old analog type AC ammeter 0-100range complete all as specified and directed by the Engineer-in-Charge. |
| 76 | Supply and fixing in replacement of old voltmeter 0-500 volt range complete all as specified and directed by the Engineer-in-Charge |
| 77 | Supply and fixing in replacement of indicator lamp Neon type green / red etc complete all as specified and directed by the Engineer-in-Charge. |
| 78 | Supply and fixing in replacement of relay 24 volt, 25 Amps with cut off circuit , ISI marked suitable for voltage stabilizer of any type/make/capacity etc complete all as specified and directed by the Engineer-in-Charge. |
| 79 | Supply and fixing in replacement of electronic circuit ISI marked suitable for voltage stabilizer of any type/make/capacity etc complete all as specified and directed by the Engineer-in-Charge. |
| 80 | Supply and fixing in replacement of Voltage stabiliser, copper wound of 4to 5 KVA capacity digital display type having I/P Correction Range of 140- 280 volt complete all as specified and directed by Engineer-in-charge. |
| 81 | Supply and fixing Digitaltype Voltmeter0 to 300 volts any type shape single phase 50 Hz AC supply, |
| 82 | Supply and fixingnew cable PVC insulated 3 core,copper conductor 2.5 sqmm includingtaking down existing unserviceablecopper flexible cable 3 core complete all as specified and directed by the Engineer-in-Charge. |
| 83 | Attending day to day emergency complanits for AC"s / Air coolers / Deep freezers / Refrigerators / stablisers all summer appliances etc complete all as specified and directed by the Engineer-in-Charge. |
| 84 | CEILING FAN / EXHAUST FAN Material and Labour for dismantling of ceiling / exhaust/ wall mounting / ventilating / air circulator fan of any make/model/size for examination of defects, cleaning of parts, providing fresh lubricant oil / greasing, replacing the defective parts as required and re-assembling the fan after replacement including testing ; Complete all as specified and as directed by the Engineer-in-charge. Note: All defective/unserviceable parts/accessories replaced shall be measured and paid under respective items of Sch "A" except minor replacements such as replacment of bolts, nuts, washers, rubber seal & flexible PVC cable 23/00.0076 upto 1 meter length etc which are included in the quoted rates. |
| 85 | Material and Labour for dismantling the winding core of ceiling fan of 1200/1400 mm sweep size of any make/model, cutting and removing the old defective/burnt winding wire, cleaning the core of the fan motor, rewinding the motor with super enameled copper winding wire using insulating materials, varnishing the core assembly and re-assembling the core including testing; Complete all as specified and as directed by the Engineer-in-charge. Note : The cost of copper winding wire will be included in the quoated rates. |
| 86 | Material and Labour for dismantling the winding core of ceiling fan of 450/380 mm sweep size of any make/model, cutting and removing the old defective/burnt winding wire, cleaning the core of the fan motor, rewinding the motor with super enameled copper winding wire using insulating materials, varnishing the core assembly and re-assembling the core including testing; Complete all as specified and as directed by the Engineer-in-charge. Note : The cost of copper winding wire will be included in the quoated rates. |
| 87 | Material and Labour for dismantling the winding core of ceiling fan of 225/300 mm sweep size of any make/model, cutting and removing the old defective/burnt winding wire, cleaning the core of the fan motor, rewinding the motor with super enameled copper winding wire using insulating materials, varnishing the core assembly and re-assembling the core including testing; Complete all as specified and as directed by the Engineer-in-charge. Note : The cost of copper winding wire will be included in the quoated rates. |
| 88 | Material and Labour for dismantling the winding core of air circulator/Wall mounted fan of any make/model, cutting and removing the old defective/burnt winding wire, cleaning the core of the fan motor, rewinding the motor with super enameled copper winding wire using insulating materials, varnishing the core assembly and re-assembling the core including testing; Complete all as specified and as directed by the Engineer-in-charge. Note : The cost of copper winding wire will be included in the quoated rates. |
| 89 | Supply and fixing in replacement of ball bearing of ceiling fan of any make/model/size; Complete all as specified and as directed by the Engineer-in-charge. |
| 90 | Supply and fixing in replacement of ball bearing of exhaust fan/air circulator of any make/model/size; Complete all as specified and as directed by the Engineer-in-charge. |
| 91 | Supply and fixing in replacement of gun metal bush of Ceiling/Exhaust /Air circulator fan of any make/model/size; Complete all as specified and as directed by the Engineer-in-charge. |
| 92 | Supply and fixing in replacement of shaft of Ceiling/Exhaust /Air circulator fan of any make/model/size; Complete all as specified and as directed by the Engineer-in-charge. |
| 93 | Supply and fixing in replacement of canopy of Ceiling fan of any make/model/size; Complete all as specified and as directed by the Engineer-in-charge. |
| 94 | Supply and fixing in replacement of `U’ clamp with nuts & bolts including washers for Ceiling fan of any make/model/size; Complete all as specified and as directed by the Engineer-in-charge. |
| 95 | Supply and fixing in replacement of Capacitor (Oil filled) of capacity 2.5 mfd with capacitor holding clamp, 240 volt and making connection; Complete all as specified and as directed by the Engineer-in-charge. |
| 96 | Supply and fixing in replacement of Capacitor (Oil filled) of capacity 4.0 mfd with capacitor holding clamp, 240 volt and making connection; Complete all as specified and as directed by the Engineer-in-charge. |
| 97 | Supply and fixing in replacement of down rod of one feet long suitable for ceiling fan of any make/model/size; Complete all as specified and as directed by the Engineer-in-charge. |
| 98 | Supply and fixing in replacement of down rod of two feet long suitable for ceiling fan of any make/model/size; Complete all as specified and as directed by the Engineer-in-charge. |
| 99 | Supply and fixing in replacement of down rod of four feet long suitable for ceiling fan of any make/model/size; Complete all as specified and as directed by the Engineer-in-charge. |
| 100 | Supply and fixing in replacement of exhaust fan blade set suitable for exhaust fan of 300/400/450 mm sweep including painting to match with material of fan blade the existing paint on body of exhaust fan; Complete all as specified and as directed by the Engineer-in-charge. |
| 101 | Supply and fixing in replacement of exhaust fan blade set suitable for exhaust fan of 250/225 mm sweep including painting to match with material of fan blade the existing paint on body of exhaust fan; Complete all as specified and as directed by the Engineer-in-charge. |
| 102 | Supply and fixing in replacement of exhaust fan blade set suitable for exhaust fan of 1200 mm sweep including painting to match with material of fan blade the existing paint on body of exhaust fan; Complete all as specified and as directed by the Engineer-in-charge. |
| 103 | Supply and fixing in replacement of exhaust fan blade set suitable for exhaust fan of 1400 mm sweep including painting to match with material of fan blade the existing paint on body of exhaust fan; Complete all as specified and as directed by the Engineer-in-charge. |
| 104 | Supply and fixing in replacement of plastic fan blade set suitable for wall mountingfan of 400 mm sweep of existing make and size ; Complete all as specified and as directed by the Engineer-in-charge. |
| 105 | Supply and fixing in replacement of plastic fan blade set suitable for ventilating fan of 250/300 mm sweep of existing make and size; Complete all as specified and as directed by the Engineer-in-charge. |
| 106 | Supply and fixing in replacement of wall mounting fan swing motor complete set suitable for wall mountingfan of 400 mm sweep as per existing make and size; Complete all as specified and as directed by the Engineer-in-charge. |
| 107 | Supply and fixing in replacement of rubber reel for ceiling fan of any make/size/model; Complete all as specified and as directed by the Engineer-in-charge. |
| 108 | Taking down defective celiling fan of 1200/1400 mm sweep including dismantling blades and carrying to unit store and Material and labour for gressing, oiling and spray painting of ceiling fan of any make/model/size complete including fan body, blade, canopies, down rod etc with one coat of synthetic enamel spray paint of white colour after cleaning all dust/oil and greasy spots including filling of cavities using filler material and refixing the same to its original position making electric connection; Complete all as specified and as directed by the Engineer-in-charge. Note : Capacitor, ball bearing, bush and flexible wire shall be measured and paid saperately. The compressor and spray machine shall be arranged/brought by contractor at E/M Yard and no extra cost shall be paid to the contractor in this effect. |
| 109 | Taking down defective exhaust fan including dismantling blades and carrying to unit store and Material and labour for gressing, oiling and spray painting of exhaust fan of any make/model/size complete including fan body, blade, canopies, down rod etc with one coat of synthetic enamel spray paint of white colour after cleaning all dust/oil and greasy spots including filling of cavities using filler material and refixing the same to its original position making electric connection; Complete all as specified and as directed by the Engineer-in-charge. Note : Capacitor, ball bearing, bush and flexible wire shall be measured and paid saperately. The compressor and spray machine shall be arranged/brought by contractor at E/M Yard and no extra cost shall be paid to the contractor in this effect. |
| 110 | Supply and Fixing of fan regulator in replacement electronic 5 step type 100 watts socket size and making all necessary connections ; Complete all as specified and as directed by the Engineer-in-charge. |
| 111 | Supply and Fixingin replacement copper 3 core wire 1.5 sqmm from ceiling rose to fan connecter ; Complete all as specified and as directed by the Engineer-in-charge. |
| 112 | Supply and Fixingin replacement fresh air fan 250 mm sweep PVC body; Complete all as specified and as directed by the Engineer-in-charge. |
| 113 | Supply and Fixingin replacement Exhaust Fan 300 mm sweep metal body; Complete all as specified and as directed by the Engineer-in-charge Notes for Sl Item No.1 to 112 (i) Contractor has to take the complaint at MES power house (E/M) from Concern JE E/M Daily Basis (Except Sunday & holiday). (ii) Contrcator has to attend the complaint within 24 Hrs after recived from JE E/M. (iii) Contrctor has to provide the Mobile no so that massges can be send on the same mobile No. (iv) For non collection of complaits from JE E/M Rs.500/- per day will be charged. (v) For Non attendence of complaints in 24 Hrs Rs.200/- per day per complaint will be charged (vi) Contractor has to return the complaint duly signed from the user with time & date. . |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
