|
| 1 | Electrical Works. |
| 2 | Supply & fixing 90W LED Street light having die cast aluminium body and diffuser with driver confirming to IP 66 protection complete in all respect. Minimum CAT AA(Crompton/Bajaj/Wipro/Philips make with 5 Year Warrenty against any defectation issued by OEM/Contractor. |
| 3 | Supply & fixingbracketsmade from32mm dia,1.20M long GI bend pipe with 02 nos. clamp of 50x6mm MS Flat suitable for fixing street light on ST pole. |
| 4 | Supply & fixing of street light junction box made of SMC material as approved Engineer incharge including cost of all material,men and T&P. |
| 5 | Supply & erection of \"D\" clamps of 38 mm x 6 mm flat iron for wall /roof type service bracket with bolts, nuts etc. complete in all respects including painting with aluminum paint . |
| 6 | Supply & fixingof 0.5 Amp to 5 Amp. SP MCB (10KA) C Curves in box with suitable rail channel. |
| 7 | Suppy,laying & drawing of3x1.5 Sq mm PVC insulated copper cable for Street/flood lights connection in existing pipe/surface/air as required including cost of material, men and T&P. |
| 8 | Dismantling of Damaged/defective/old LED or HPSV street lights including PVC cable,bend pipe, clamp etc. from ST pole including cost of men and T&P. |
| 9 | Supply and laying of 16 sq.mm 2 core aluminium conductor PVC insulated, unarmoured, served, double sheathed cable 1100 V grade pole to pole (Havell\"s/Polycab/Grandley /Glostar) |
| 10 | Supply and laying of 16 sq.mm 4 core aluminium conductor PVC insulated, armoured, served, sheathed cable 1100 V grade in existing DWC HDPE pipe/MS/GI/Surface etc. including cost of trenchless method in road crossing. (Havells/Polycab/Grandley only) |
| 11 | Supply and laying of 25 sq.mm 3.5 core aluminium conductor PVC insulated, armoured, served, sheathed cable 1100 V grade in existing DWC HDPE/MS/GI/Surface etc.including cost of trenchless method in road crossing(Havells/Polycab/Grandley only) |
| 12 | Supply and laying of 50 sq.mm 3.5 core aluminium conductor PVC insulated, armoured, served, sheathed cable 1100 V grade in existing DWC HDPE/MS/GI/Surface etc.including cost of trenchless method in road crossing(Havells/Polycab/Grandley only) |
| 13 | Supply and Erection of 8.0 to 6.0 SWG on poles/service brackets including binding etc. as per directed by the in charge including cost of material labour and T&P. |
| 14 | Supply & fixing of plan or pin type copper tin plated lug 16 sq. mm core cable leads,insulationt tape and making connection etc. complete in all in respect as per direction of Engineer in charge. |
| 15 | Supply & fixing of plan or pin type copper tin plated lug 25 sq. mm 3.5 core cable leads,insulationt tape and making connection etc. complete in all in respect as per direction of Engineer in charge. (20 Panel x 6 Nos.+ 2 x20 for 50 sq.mm cable) |
| 16 | Supply & fixing of plan or pin type copper tin plated lug 50 sq. mm 3.5 core cable leads,insulationt tape and making connection etc. complete in all in respect as per direction of Engineer in charge. (20 crossing x 6 Nos.) |
| 17 | Supply & Laying of63 mm HDPE pipe ISI marked along with all accessories like socket,bend,couple etc. confirming to IS 14930 Part II complete with fitting and cutting,jointing etc direct in ground (750-1000mm below ground level) including excavation and refilling the treanch. including cost of material,labour and T&P. |
| 18 | Supply & laying of 63mm DWC /HDPE pipe by horizontal manual drilling at road crossing including cost of all material, men and T&P. |
| 19 | Supply & Laying of90 mm HDPE pipe ISI marked along with all accessories like socket,bend,couple etc. confirming to IS 14930 Part II complete with fitting and cutting,jointing etc direct in ground (750-1000mm below ground level) including excavation and refilling the treanch. including cost of material,labour and T&P. |
| 20 | Supply & laying of 90 mm DWC /HDPE pipe by horizontal manual drilling at road crossing including cost of all material, men and T&P. |
| 21 | Supply & fixing 40A TPN capacity of automatic street light cubical panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors,HRC fuses, isolating switch metering instrument & instrument box with CT\"s etc. |
| 22 | Providing & fixing 25mm x5mm G.I. earth strip on surface or in recess including cost of GI saddle/Al. Alloy/cadmium/PVC fastener etc.plated iron screw etc. as required for connections. |
| 23 | Supply & fixing 50mm dia GI pipe B class for climbing up the cable of 16/25/50 Sq. mm from ground to overhead S/L line including all acessories material,labour and T&P required for proper completion. |
| 24 | Supply & fixing MS clamp made out from 50x6mm MS flat for securing 50mm GI Pipe/HDPE with ST pole. |
| 25 | S/B of 40 mm dia x 4.5 mtr. long G.I. pipe vertically for earthing having 12 mm dia. Holes spaced 75 mm apart drilled upto 2 mtr. from the bottom complete with earthing lead of no.6 to 8 SWG GI wire in G.I.pipe upto appron upto switch board 30 cm square box with hinged cover masonary enclosure. Funnel of top, alternate layers of charcoal and salt at least 150 mm thick alround etc. as per direction E/I complete in all respect as per drawing UPPWD Sch. No. 701 |
| 26 | Supply and erection of steel tubular pole 410 SP-44 10 M long. 168 Kg with CI cap on the top complete inclusive hardware and ordinary pole fittings with Painting of two coats of aluminum and one coat of red oxide paint including foundation work with 1/6th of overall length of pole below ground level with 45cm dia cement concrete with 45cm above the ground leval. The foundation of underground will not be less than 20cm thick layers of cement concrete in the ration of 1:3:6 (Cement :coarse sand : over burnt brick ballast/stone ballast), The brick ballast/stone ballast will be used of 1.25cm size with stone pad of 30x30x7.5cm at the base. as per direction of E/I of work/site including all T&P, men and material for proper completion of work |
| 27 | Supply & fixing pole fitting suitable for single phase three wire line in vertical configuration of two numbers 50x6mm clamp of MS flat with two numbers 100x115mm shackle insulator and one number 50x6mm M.S. clamp for earth wire. |
| 28 | Supply & fixing LT extra origenting/Terminating/ angle/Section pole fitting suitable for single phase three wire line of two numbers shackle insulator of 100x115mm size and with four numbers 250 x 40 x 3 mm with 18mm dia hole including cost of nut & bolt, washers, men and T&P. |
| 29 | Supply & fixing LT PVC Spacerincluding cost ofmaterial ,men and T&P. |
| 30 | Supply and erection of stay ofLT lines for ST pole with GI anchor plate (152x152x6mm) stay rod (16mm dia x 1.85 m long) GI stay below (16mm dia rod , thriple, double stay tightener, stay insulator, clampas & stay wire (GS 7/3 .15mm) including grouting in 1:4:8 ratio of cement corcente using coars sand, over burnt brick ballast as per direction of engineer in charg complete in all respect as per SIDC Sch No. 06(A) |
| 31 | Supply & fixing anti climbing deviceon ST pole byfabricated G.I flat/bar in shape of ringhavingMS pointed fins of 6mm dia of 225mm length in 8nos. including cost of all material,men and T&P. as per direction of engineer in charge. |
| 32 | Supply & fixingLT shackle insulator including cost ofmaterial ,men and T&P. |
| 33 | Supply and fixing of MS/GI clamp as per design suitable for fixing shackle insulator, made out for 50x6mm M.S. Flat including nut, bolt & washer. |
| 34 | Supply and fixing of 6 Watt LED Spot/Spike light luminaire Confirming to IP 66 Protection complete in all respect.(Approved Make) |
| 35 | Supply & fixing of decorative 8 to 16Watt LED bollard luminaire with driver set confirming to IP 65 protection complete in all respect. CAT AA (Approved make) |
| 36 | Supply & wiring of 16 Sq mm 2 core PVC Aluminum conductor sheathed armoured cable 1100 Volt grade of approved make at a depth of 750 mm below ground in existing HDPE/GI/DWC hume pipe/Surface including cost of material,labour and T&P but excluding cost of HDPE pipe. |
| 37 | Supply and laying ofPVC/HDPE corrugated conduits of 32 mm outer dia 150mm in ground level with required fixing acessories including cost of excavation, all material labour and T&P. |
| 38 | Cleaning & spray painting of ST bend pole and power ST pole with one coat of red oxide primer and two coat of alum. paint/PU paint as per direction of Engineer incharge including cost of all material, men and Hydraulic crane,other T&P.(Burger/Nerolac/Asian make) |
| 39 | Supply & fixing 3-Phase Power Contractor ML-3 type or equel for Automatic Street & High Mast Control Panel in cluding cost of Connection, men and T&P. (Only for AMC as directed by Engineer in charge.) |
| 40 | Supply & fixing Astronomical time switch L&T/Siemens/C&S or equel brand including cost of connection, material, men and T&P.(Only for AMC as directed by Engineer in charge.) |
| 41 | S&F of 63 amp. 4 pole MCB (10KA cat B) for control panel complete in all respects.(Only for AMC as directed by Engineer in charge.) |
| 42 | S&F junction box made from MS Sheet of 200x300x100mm duly painted, complete with cable glands, connector etc. suitable for 24 Nos. Flood lights connection.(Only for AMC as directed by Engineer in charge.) |
| 43 | Supply and fixing of male-female plug socket for 16 meter high mast lighting system complete in all respects. |
| 44 | Rewinding/Repairing of 1.5 HP 3 Phase 415V Burnt AC Power Tool Motor with B-Class super enamel Copper wire including dismantling and re-fixing at Original place.(Only for AMC as directed by Engineer in charge.) |
| 45 | S&F Annealed tinned Copper flexible soft PVC /Rubber insulated trailing cable of4 sq.mm 4/5core.(Only for AMC as directed by Engineer in charge.) |
| 46 | Oiling & greasing of SS wire rope set and other moving parts by lowering down,re-hoisting of lantarn carriage including cost of material,men and T&P.(Only for AMC as directed by Engineer in charge.) |
| 47 | Supply & top-up gear oil in winch machine by opening gear box including cost of material,men and T&P.(Only for AMC as directed by Engineer in charge.) |
| 48 | S&F of stainless steel grade AIS1316steel wire rope set6-8mm diameter on existing winch machine including making/modification proper arrangement for installation in existing machine.(Only for AMC as directed by Engineer in charge.) |
| 49 | S&F single unit Aviation obstruction blinking RED LED Light with making connection etc. complete in all respect on top of the as per direction of engineer incharge.(CAT AAA) (Only for AMC as directed by Engineer in charge.) |
| 50 | S&F double drum 750 Kg winch machine suiable for high Mast Light including making/modification proper arrangement for installation in existing shaft.ED-II(39)/Dt: 01.06.2022.(Only for AMC as directed by Engineer in charge.) |
| 51 | Supply and making straight through joint with cast resin compound including ferrules and other joints materials for following size of PVC insulated and PVC sheathed/XLPE aluminium conductor 25/35/50 sq.mm 3.5 core cable of 1100 v grade complete |
| 52 | Trimming of tree branch around the street light pole/ST pole/Central Varge for proper illumination& proper disposal of tree branch collecting on trolly or similer moving item including cost of men, trolly, T&P etc. |
| 53 | Dismantling of damaged ST pole which cause to any accident of men and UPSIDA property. in industrial area including cost of men and T&P and shifting to store charge. |
| 54 | Dismantling & re-grouting of street light/Steel tubler (upto 12 Mtr long) Tilt/sick bend pole in 1:3:6 ratio cement concrete with stone pad includingstrengthening of pole by providing additional 04 Nos. support of65x65x6mm or higher sizeMS angle in suitable length with the help of welding/cutting as per technicalspecification. |
| 55 | Providing new street lights pole earthling of an existing pole by inserting MS Rod 20x2500mm in vertically ground level and connecting the pole with the help of 6 SWG GI wire including cost of all material, men and T&P. in industrial area as per UPSIDA/UPPCL Technical specification. |
| 56 | Strengthen of ST pole foundation by providing new concreting including broken of weak foundation,excavation, surface finishing and painting ,cost of all material,men and T&P. |
| 57 | Hiring Charge of 80-100 feet expandable street light repairing hydraulic lift, capacity 300 Kg including cost of operator, mounting vehicle and fuel etc. (Only for AMC as directed by Engineer in charge.) |
| 58 | Cost of material spares, wire, fuses, small accessories, alum. Lug up to 16 sq.mm , small cable gland , insulation tap,plastic tie, screw, nut & bolts, old cloth, cleaning spray and other small associated required for up-gradation work etc. (Only for AMC as directed by Engineer in charge.) |
| 59 | Providing operating cum maintenance staff of the entire street light networkfor routine maintenance of road lighting system,administrative,site offic and staff colony etc. including dismantling & re-fixing of other street lights of UPSIDA with there travelling expenses etc. (Electrician-2 Nos.+ Helper-3 Nos. Only for AMC as directed by Engineer in charge.) |
| 60 | Painting letters (Pole No.) 2.5cm up to 8.0 cm size complete on Street light Pole/Panel/Other electrical properties under UPSIDA including cost of all material, men and T&P. |
| 61 | Fabrication, supply and fixing of work information board in M.S. frame made by 50mm dia Square Pipe of Stainless steel grade SS-304 & 16 mm thick base plate with back supporting of bracing by MS flat of 25x6mm and 2.85 Mtr long supporting leg made from 65mm pipe SS-304 grade with proper grouting arrangement. The board should be Retro reflective type in green color with white letters as required and shall be fixed at a height of 1.2 Meter from ground by providing 0.45x0.45x0.60 Mtr cement concrete stone pad as per drawing enclosed. |
| 62 | Buyback of old/defective 150W/250W HPSV luminaies complete fittings as is as where condition. |
