|
| 1 | Title1 | Hammer ball peen with handle. 450 grams(1 Ib) |
| 2 | Title2 | Hammer ball peen with handle. 220 grams (1/2 lb) |
| 3 | Title3 | File flat - second cut. 250mm |
| 4 | Title4 | File flat smooth. 250mm |
| 5 | Title5 | File half round second cut. 150mm |
| 6 | Title6 | Hacksaw frame fixed type. 300mm |
| 7 | Title7 | Safety goggles. |
| 8 | Title8 | Dot punch. 100mm |
| 9 | Title9 | Steel Rule Graduated both in Metric and English Unit 300mm stainless steel |
| 10 | Title10 | Straight edge steel 300mm |
| 11 | Title11 | Micrometer outside. 0-25mm |
| 12 | Title12 | Micrometer inside with extension rods. Accuracy 0.01 mm with extension rods up to 150mm |
| 13 | Title13 | Vernier caliper 150mm |
| 14 | Title14 | Vernier bevel protractor Blade with Acute Angle Attachment. 300mm |
| 15 | Title15 | Drill twist straight shank 3mm to 12mm by 0.5 mm H.S.S. |
| 16 | Title16 | Drill Twist Taper Shank8mm to 20mm by 0.5mm H.S.S. |
| 17 | Title17 | File knife edge smooth.150 mm |
| 18 | Title18 | File triangular smooth. 200mm |
| 19 | Title19 | File round second cut. 200mm |
| 20 | Title20 | Filesquare second cut. 250mm |
| 21 | Title21 | File triangular second cut. 200mm |
| 22 | Title22 | File flat second cut safe edge. 300mm |
| 23 | Title23 | File flat bastard. 200mm |
| 24 | Title24 | File flat bastard.300mm |
| 25 | Title25 | File half round second cut. 250mm |
| 26 | Title26 | File half round bastard. 250mm |
| 27 | Title27 | File round bastard. 250mm |
| 28 | Title28 | File hand second cut. 150mm |
| 29 | Title29 | Clamp C 100mm |
| 30 | Title30 | Clamp C 200mm |
| 31 | Title31 | Hand Reamer set (Taper pin straight flute) Nominal Dia.6,8,10,12,16mm Dia.6,8,10,12,16mm |
| 32 | Title32 | Machine Reamer parallel (Helical flute). 12-16mm set of 5. |
| 33 | Title33 | Chisel cold crosscut & diamond point. 9mm x 150mm |
| 34 | Title34 | Pipe wrench. 400mm |
| 35 | Title35 | Adjustable pipe die set BSP. Cover pipe size 1” or¾” |
| 36 | Title36 | Wing compass. 254mm or 300mm |
| 37 | Title37 | Torque wrench (Standard/Ratchet type). 14 to 68Nm |
| 38 | Title38 | Knurling tool (Diamond, straight & Diagonal) |
| 39 | Title39 | Indexable boring bar with inserts.1’’ shank |
| 40 | Title40 | Lapping plate. Dia. -6’’ |
| 41 | Title41 | Drill gauges. Letter drill gauge (A to Z), Number drill gauge (1 to 60),Metric drill gauge (1.5mm to12.5mm, 30 holes) |
| 42 | Title42 | Stop cock. 25NB (2-way, Threaded end) |
| 43 | Title43 | Slip-on Forged steel Flange |
| 44 | Title44 | Pipe threading die with handle Ratchet type Die head |
| 45 | Title45 | Straight Shank Hollow Punch Sets 5-12mm |
| 46 | Title46 | Lifting sling 8mm Nominal Dia. Single leg sling |
| 47 | Title47 | Bearing extractor Universal gear puller 2 or 3 jaws adjustable |
| 48 | Title48 | Pulley extractor |
| 49 | Title49 | Pocker |
| 50 | Title50 | Prick punch. 100mm |
| 51 | Title51 | Mallet. Dia. 100 mm X 150 mm |
| 52 | Title52 | Flat headed hammers with handle. |
| 53 | Title53 | Planishing hammer. |
| 54 | Title54 | Snip bent Left Cut. 250 mm |
| 55 | Title55 | Stake grooving. 100 X 100 X 300 mm |
| 56 | Title56 | Slip Gauge as Johnson metric set. 87 Pieces Set |
| 57 | Title57 | Gauge snap Go and Not Go (25 to 50 mm by 5 mm, Set of 6 pieces) |
| 58 | Title58 | Gauge plug. Single ended 5 to 55 by 5 mm. Set of 11 pcs. |
| 59 | Title59 | Gauge telescopic set. 8 - 150 mm |
| 60 | Title60 | Sine bar. 125 mm |
| 61 | Title61 | Dial Vernier caliper. (Universal type) 0 - 300 mm, LC 0.05 mm |
| 62 | Title62 | Depth micrometer. 0-25 mm .Accuracy 0.01 mm with standard set of extension rods up to 200 mm |
| 63 | Title63 | Digital vernier caliper. 0 - 150 mm with least count 0.02mm |
| 64 | Title64 | Digital Micrometer outside. 0 - 25 mm L.C. 0.001 mm. |
| 65 | Title65 | Comparators Gauge - Dial Indication with Stand and Bracket. LC 0.01mm |
| 66 | Title66 | Surface roughness comparison plates. N1 - N12 Grade |
| 67 | Title67 | Digital Vernier caliper. 0 - 200 mm L.C. 0.01 mm (Optional) |
| 68 | Title68 | Vernier Bevel protector |
| 69 | Title69 | Stilson wrenches. 250 mm |
