Tender For Replacement Of Existing Motor Pumpset, Ats Starter Valve And Allied Works At Thiruparkadal Head Water Works In Kancheepuram Corporation.
Tender Value
30 Lakhs
Estimated cost
Bid Submission
18 Apr 2023
0 days left
EMD
30000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
kancheepuram → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Replacement of existing motor pumpset, ats starter valve and allied works at thiruparkadal head water works in kancheepuram corporation.
BOQ
| Sl. No. | Item Description |
| 1 | Supply and delivery of vertical Hollow/Solid shaft Squirrel cage induction motor TEFC Motor (IS 325 ) suitable for the above pump continuous rated TEFC/SPDP type with Class \"F\" insulation for operation in AC, three Phase/50 HZ (±5%), 415V (±10%) running with a speed of pump noted above and with inbuilt thrust bearing assembly capable of taking up the entire load and non - reverse ratchet assembly etc., complete. The motor rating noted above is the minimum and shall be such that it should never be over loaded when the pump works at MWL condition and shall be 10% over and above the maximum HP absorbed by the pump. The motor offered should be energy efficient to have maximum efficiency at high power factor. Separate thrust bearing assembly could also be supplied to take up the down load.60 HP - 45KW |
| 2 | Supply and delivery of Vertical type water/Oil lubricated statically, dynamically, hydraulically balanced turbine pump capable of discharging the following duty condition as given below due to all causes with surface discharge head confirming to IS 1710 and as amended as on date with accessories as per IS 5120/1977 ( Reaffirmed 2011 ) and as amended thereafter to suit the site condition. The speed, No. of stages, sizes of column pipes and line shaft indicated is based on site condition prevailing during investigation. The pump should be supplied with non reversible ratchet pin housing safety clutch, suction strainer etc. The Pump Bowl assembly shall be with bronze impeller running at 1450 rpm. The pump includes suitable head shaft, suitable 1.5 metre long SS line shaft required Nos. to suit the well depth, Rubber line shaft bearing of required Nos., C.I Bearing retainer of required Nos., 100 litre HDPE Pre- lubricating tank with 20mm PVC Rigid pipe connection along with GM gate valves, Suitable ERW column pipe of each 1.5m long of required Nos. to suit the well depth, Suction bell mouth of suitable size, M.S. clamps suitable for column pipe/line shaft -2 set and Spanner - 1 set etc complete. 5000LPM, 40M Head |
| 3 | Supply and delivery of 60 HP45 KW Fully Automatic Auto Transformer Starter suitable for the motor offered. Floor mounting type air/ oil cooled Auto Transformer Starter with tapings at 50%, 65%, 80%, housed in robust steel chamber with arc and main contacts confirming to IS 8544 Part IV and as amended therafter for operation in AC three Phase 50 Hz (+/- 5%), 415V (+/- 10%) with the following components, under voltage release with no volt coil, over load relay with dash pot arrangements, single phasing preventor, LED ON/ OFF switches, Mounted Ammeter, Earth leakage relay, contactor assembly suitable for next standard KW rating, in coming and out going cable entry provisions, transformer tank including first filling of oil etc.60 HP - 45 KW |
| 4 | Supply and Delivery of CI sluice valves non raising spindle types with spur gear arrangments to pressure rating of 1.6 PN to be used in pump houses (long body/ long face to face) conforming to is and with 5 years warranty including cost of transporatation charges directed by departmental offocers.350mm Valve - |
| 5 | Suppluy and Delivery of CI Single Door/ Multi Door Non return valve conforming to IS 5312/2003(part I & II) to be fixed after Water meter/ Flow recorder on pumping main near Pump house with dash pot arrangement for 90% fast closing & 10% slow closing and with 5 years warranty including cost of transporatation charges directed by departmental officers. 350mm Valve - |
| 6 | Power capacitor for power factor improvement with oil filled with discharge resistance 3 phase 415/440V 50 HZ conforming to ISS with ISI markin page no ,205, si no part G (4 A) 20 KVAR Power Capacitor (Rs.318 .00/ KVAR.) |
| 7 | Power capacitor for power factor improvement with oil filled with discharge resistance 3 phase 415/440V 50 HZ conforming to ISS with ISI markin page no ,205, si no part G (4 A) 25 KVAR Power Capacitor |
| 8 | Erection and Fixing of 350mm CI Sulice Valve and Non- Return Valve inlcuding of all labour charges etc |
| 9 | Supply of 3 core185 sq.mm L.T. Cables 1.1 KV grade armoured aluminiumconductor cross linked poly ethylene insulated pvc sheathedcables conforming to is 7098 (part I)/1988 and as amended thereafter with ISI marking. |
| 10 | Laying of 3 Core 185 sq.mm L.T Cable trhenches inside the Pump room or in Air. |
AI Tender Summary
Tender Timeline
Apr 11, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedApr 18, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedApr 18, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender