Shipping Government Departments Closing in 0 days TDR #37198149

Tender For Procurement Of Hardware Material For Ferryboats

Issued by Government Departments · North Goa, Goa
Tender Value
13.61 Lakhs
Estimated cost
Bid Submission
08 May 2023
0 days left
EMD
10000
Bank guarantee accepted
Document Fee
1500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
North Goa → Goa
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Procurement Of Hardware Material For Ferryboats , M.S. Chain Of 5/8 (16 Mm) Grade 30 (Tested & Calibrated) Smooth, Electric Welding Calibrated High Tensil As Per Isd 2429/Ii 1970. The Chain Should Supplied With Test And Examination Certificate As Mentioned In The Is Specification And Should Be With Proper Identification And Inspection Marking. , M.S. Chain Of 1/2 (12.5 Mm) Grade 30 (Tested & Calibrated) Smooth, Electric Welding Calibrated High Tensil As Per Isd 2429/Ii 1970. The Chain Should Supplied With Test & Examination Certificateas Mentioned In The Is Specification And Should Be With Proper Identification And Inspection Markingexamination Certificate , Galvanised D Shackeles Of 5/8 (Inside 1) , Galvanised Wire Clip Id/14 Mm (9/16Mm) , Galvanised Dshackles Of 1/2 , Galvanised Dshackles Of 1/4 , Galvanised Wire Clip 1/8 , Galvanised Dshackles 5/16 , Alied Packing 3Mm , Spring Washer 1/2 (12.5Mm) , U.N.F Nuts & Bolts 1/2 X 41/2 (Half Thread) Make-Tvs , Hose Clamps 1/4 , Hose Clamp 1/2 , Gland Packing 1/2 / Grphite Packing 1/2 For Marine Use Black , Rubber Packing 3Mm (Black) , Rubber Packing 3Mm (White) , Taflon Tape 3/4 (19Mm X 10 Mts Long , M. Seal 100 Gms , H.T.Bolt M12 X 30 Hy.Gear (Gr 10-Tvs) , Cutting Wheel 4 (100 Mm) (105 X 1 X 16Mm) , Grinding Wheel 4 (100 Mm) (105 X 1 X 16Mm) , M.S Nuts & Bolts 1/2 X 8 (Full Thread) , M.S Washer 1/2 , G. I Plain Sheet Of 18 Gauge (8Ft X 4Ft) Make Tata/Jindal , White Cement Bags Of 1 Kg , Galvanised Buckets Of 15 Lts , Gland Packing 5/8 (16Mm) , Rubber Canvas Belt 2 (Width 5Mm) , U.N.F Half Threaded Hex Bolt And Nuts 3/8 X 2 1/4 , P.V.C Pipe 5/16 For Ferryboats (Diesel Gauge Pipe) , White Colour Cotton Waste With Cotton Fibres And Should Be Free From Article Fibres And Cloth Pieces (Sample To Be Submitted) , Polyproplene Rope 36Mm Dia 3 Strands With Isi Marking Confirming To Is 5175 Of 1992, Length Of Coil 220 Mts Weight Per Coil 129 Kgs. , Nylon Rope 10 Mm (For Ring Buoys) , U.N.F Nuts& Bolts 1/2 X 5 (Half Threaded) Make - Tvs , Hose Pipe Clips 1 1/2 , S. S. Nuts & Bolts 5/8 X 1 (Bsw) (Full Thread) , B.S.F Nut & Bolt 1/2 X 2 (Half Thread) Make-Tvs , Galvanised Wire Rope 1/8 (Accelerator Cable) , Hose Pipe Clip 2 1/2 , Hose Pipe Clip 3 , Hose Pipe Clips (S.S) 1 1/4 , Spring Washer 8Mm , Spring Washer 9/16 , Spring Washer 5/16 , G. I. Wire Rope Thimble 5/8 , Rubber Packing 20 Mm X 44 Mm , G. I. Fire Bucket Round Bottom As Per Is Specification , Iron Hings 4 (Gate Hooks) , U.N.F Nuts & Bolts 1/2 X 6 (12Mm X 150 Mm) Make-Tvs Dia 12-Half Thread , S.S. Nuts & Bolts 1/2 X 5 (B.S.W) , B.S.F Nut And Bolts 1/2 X 2 1/2 (Half Thread) , S. S. Nut & Bolt 3/8 X 3 (Bsw) , S.S. Nut & Bolt 3/8 X 5 (B.S.W) , S.S Nut & Bolt 5/8 X 2 1/2 (Bsw) , H.T Bolt 8 X 60 Mm Make- Tvs , H.T Bolt M1 X 40 Mm (Pitch 1.5 Mm) (Make Tvs) , Spring Washer 10 Mm , S. S. Pipe 1 (4 Mts Long) Type 304-Sch 40S Od-33.40 Mm,Id-26.64 Mm For Water Cooling Pipeline. , S. S. Bend 1 (Short) -25 Mm (Type 304)

Corrigendum

Sr No Corrigendum Date Corrigendum Type New Submission Date
1 27-Apr-2023 Bid Auto Extn Corrigendum Bid Auto Extn Corrigendum 08-May-2023

BOQ

Name of Work: Procurement of Hardware Material
Sl. No. Item Description
1M.S. Chain of 5/8\" (16 mm) Grade 30 (Tested & Calibrated) smooth, electric welding calibrated high tensil as per ISD 2429/II 1970. The chain should supplied with test and examination certificate as mentioned in the IS specification and should be with proper identification and inspection marking.
2M.S. Chain of 1/2\" (12.5 mm) Grade 30 (Tested & Calibrated) smooth, electric welding calibrated high tensil as per ISD 2429/II 1970. The chain should supplied with test & examination certificateas mentioned in the IS specification and should be with proper identification and inspection markingexamination certificate
3Galvanised D\" Shackeles of 5/8\" (Inside 1\")
4Galvanised Wire Clip ID/14 mm (9/16mm)
5Galvanised D\"Shackles of 1/2\"
6Galvanised D\"Shackles of 1/4\"
7Galvanised Wire Clip 1/8\"
8Galvanised D\"Shackles 5/16\"
9Alied Packing 3mm
10Spring Washer 1/2 (12.5mm)
11U.N.F Nuts & Bolts 1/2 x 41/2 (Half thread) make-TVS
12Hose Clamps 1/4\"
13Hose Clamp 1/2\"
14Gland Packing 1/2\" / Grphite packing 1/2 for marine use black
15Rubber packing 3mm (Black)
16Rubber Packing 3mm (White)
17Taflon Tape 3/4\" (19mm x 10 mts long
18M. Seal 100 gms
19H.T.Bolt M12 x 30 Hy.Gear (Gr 10-TVS)
20Cutting Wheel 4\" (100 mm) (105 x 1 x 16mm)
21Grinding Wheel 4\" (100 mm) (105 x 1 x 16mm)
22M.S Nuts & Bolts 1/2 x 8\" (full thread)
23M.S Washer 1/2\"
24G. I Plain Sheet of 18 Gauge (8ft x 4ft) Make Tata/Jindal
25White Cement Bags of 1 kg
26Galvanised Buckets of 15 lts
27Gland Packing 5/8\" (16mm)
28Rubber Canvas Belt 2\" (Width 5mm)
29U.N.F Half Threaded Hex Bolt and Nuts 3/8 x 2 1/4\"
30P.V.C Pipe 5/16 for ferryboats (diesel Gauge Pipe)
31White Colour cotton waste with cotton fibres and should be free from article fibres and cloth pieces (Sample to be submitted)
32Polyproplene Rope 36mm dia 3 strands with ISI marking confirming to IS 5175 of 1992, Length of coil 220 mts weight per coil 129 kgs.
33Nylon Rope 10 mm (for Ring buoys)
34U.N.F Nuts& Bolts 1/2\" x 5\" (half Threaded) Make - TVS
35Hose Pipe Clips 1 1/2\"
36S. S. Nuts & Bolts 5/8 x 1\" (BSW) (Full thread)
37B.S.F Nut & Bolt 1/2 x 2\" (Half Thread) Make-TVS
38Galvanised Wire Rope 1/8\" (Accelerator Cable)
39Hose Pipe Clip 2 1/2\"
40Hose Pipe Clip 3\"
41Hose Pipe Clips (S.S) 1 1/4\"
42Spring Washer 8mm
43Spring Washer 9/16\"
44Spring Washer 5/16
45G. I. Wire Rope thimble 5/8\"
46Rubber Packing 20 mm x 44 mm
47G. I. Fire Bucket Round Bottom as per IS Specification
48Iron Hings 4\" (Gate Hooks)
49U.N.F Nuts & Bolts 1/2 x 6\" (12mm x 150 mm) Make-TVS dia 12-Half Thread
50S.S. Nuts & Bolts 1/2 x 5\" (B.S.W)
51B.S.F Nut and Bolts 1/2 x 2 1/2\" (Half Thread)
52S. S. Nut & Bolt 3/8 x 3\" (BSW)
53S.S. Nut & Bolt 3/8 x 5\" (B.S.W)
54S.S Nut & Bolt 5/8 x 2 1/2\" (BSW)
55H.T Bolt 8 x 60 mm Make- TVS
56H.T Bolt M1 x 40 mm (Pitch 1.5 mm) (Make TVS)
57Spring Washer 10 mm
58S. S. Pipe 1\" (4 mts long) Type 304-SCH 40S OD-33.40 mm,ID-26.64 mm For water cooling pipeline.
59S. S. Bend 1\" (Short) -25 mm (type 304)

AI Tender Summary

OUR REF NO 37198149
AUTHORITY Government Departments
TENDER VALUE 13.61 Lakhs
LAST DATE 08-05-2023
Authority
Authority Name River Navigation Department
Work Description Procurement Of Hardware Material For Ferryboats , M.S. Chain Of 5/8 (16 Mm) Grade 30 (Tested & Calibrated) Smooth, Electric Welding Calibrated High Tensil As Per Isd 2429/Ii 1970. The Chain Should Supplied With Test And Examination Certificate As Mentioned In The Is Specification And Should Be With Proper Identification And Inspection Marking. , M.S. Chain Of 1/2 (12.5 Mm) Grade 30 (Tested & Calibrated) Smooth, Electric Welding Calibrated High Tensil As Per Isd 2429/Ii 1970. The Chain Should Supplied With Test & Examination Certificateas Mentioned In The Is Specification And Should Be With Proper Identification And Inspection Markingexamination Certificate , Galvanised D Shackeles Of 5/8 (Inside 1) , Galvanised Wire Clip Id/14 Mm (9/16Mm) , Galvanised Dshackles Of 1/2 , Galvanised Dshackles Of 1/4 , Galvanised Wire Clip 1/8 , Galvanised Dshackles 5/16 , Alied Packing 3Mm , Spring Washer 1/2 (12.5Mm) , U.N.F Nuts & Bolts 1/2 X 41/2 (Half Thread) Make-Tvs , Hose Clamps 1/4 , Hose Clamp 1/2 , Gland Packing 1/2 / Grphite Packing 1/2 For Marine Use Black , Rubber Packing 3Mm (Black) , Rubber Packing 3Mm (White) , Taflon Tape 3/4 (19Mm X 10 Mts Long , M. Seal 100 Gms , H.T.Bolt M12 X 30 Hy.Gear (Gr 10-Tvs) , Cutting Wheel 4 (100 Mm) (105 X 1 X 16Mm) , Grinding Wheel 4 (100 Mm) (105 X 1 X 16Mm) , M.S Nuts & Bolts 1/2 X 8 (Full Thread) , M.S Washer 1/2 , G. I Plain Sheet Of 18 Gauge (8Ft X 4Ft) Make Tata/Jindal , White Cement Bags Of 1 Kg , Galvanised Buckets Of 15 Lts , Gland Packing 5/8 (16Mm) , Rubber Canvas Belt 2 (Width 5Mm) , U.N.F Half Threaded Hex Bolt And Nuts 3/8 X 2 1/4 , P.V.C Pipe 5/16 For Ferryboats (Diesel Gauge Pipe) , White Colour Cotton Waste With Cotton Fibres And Should Be Free From Article Fibres And Cloth Pieces (Sample To Be Submitted) , Polyproplene Rope 36Mm Dia 3 Strands With Isi Marking Confirming To Is 5175 Of 1992, Length Of Coil 220 Mts Weight Per Coil 129 Kgs. , Nylon Rope 10 Mm (For Ring Buoys) , U.N.F Nuts& Bolts 1/2 X 5 (Half Threaded) Make - Tvs , Hose Pipe Clips 1 1/2 , S. S. Nuts & Bolts 5/8 X 1 (Bsw) (Full Thread) , B.S.F Nut & Bolt 1/2 X 2 (Half Thread) Make-Tvs , Galvanised Wire Rope 1/8 (Accelerator Cable) , Hose Pipe Clip 2 1/2 , Hose Pipe Clip 3 , Hose Pipe Clips (S.S) 1 1/4 , Spring Washer 8Mm , Spring Washer 9/16 , Spring Washer 5/16 , G. I. Wire Rope Thimble 5/8 , Rubber Packing 20 Mm X 44 Mm , G. I. Fire Bucket Round Bottom As Per Is Specification , Iron Hings 4 (Gate Hooks) , U.N.F Nuts & Bolts 1/2 X 6 (12Mm X 150 Mm) Make-Tvs Dia 12-Half Thread , S.S. Nuts & Bolts 1/2 X 5 (B.S.W) , B.S.F Nut And Bolts 1/2 X 2 1/2 (Half Thread) , S. S. Nut & Bolt 3/8 X 3 (Bsw) , S.S. Nut & Bolt 3/8 X 5 (B.S.W) , S.S Nut & Bolt 5/8 X 2 1/2 (Bsw) , H.T Bolt 8 X 60 Mm Make- Tvs , H.T Bolt M1 X 40 Mm (Pitch 1.5 Mm) (Make Tvs) , Spring Washer 10 Mm , S. S. Pipe 1 (4 Mts Long) Type 304-Sch 40S Od-33.40 Mm,Id-26.64 Mm For Water Cooling Pipeline. , S. S. Bend 1 (Short) -25 Mm (Type 304)
Basic Detail
Tender No RND/Work/P/e-tender/22-23/936
Bidding Type Tender
Location
City North Goa
State Goa
Key Dates
Publish Date 27 Apr 2023
Submission Date 08 May 2023
Open Date 09 May 2023
Finance
Tender Value 13.61 Lakhs
Tender Fee 1500
EMD 10000
Exemption Not Available
Document List
f48b602f-064d-4674-bc6d-99bacc094c01.html
BOQ_8382.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Apr 27, 2023
11:30 IST

Tender Published

Tender notice published.

Completed
May 08, 2023
18:00 IST

Corrigendum-1 Issued

Clarifications on tender conditions and amendments issued.

Completed
May 08, 2023
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
May 09, 2023

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
html

f48b602f-064d-4674-bc6d-99bacc094c01.html

xls

BOQ_8382.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders