Repairs And Polishing To Wooden Furniture Under Ge ( Central ) Kirkee.-- 1 Chair Dining Cushioned ( Fd / E6 / Map / 10 ) :- ( A ) Removing Un Serviceable Components And Replacing The Same With Seasoned Teak Wood To Match With Existingfor Front Legs Of Size 410X50x35mm. 2 ( B ) All As Per Sl Item No. 1 Above But Rear Legs Of Size 960X50x35mm 3 ( C ) All As Per Sl Itemno 1 Above But Front Rail Of Size 430X75x30mm. 4 ( D ) All As Per Sl Item No 1 Above But Verticle Wooden Battom Atback Of Size 520 X 40 X 15Mm 5 ( E ) All As Per Sl Item No 1 Above But Stiffner Of Size 460 X 20 X 20Mm 6 ( F ) All As Per Sl Item No 1 Above Butbrackets Ofseat 7 ( G ) All As Per Sl Item No 1 Above But Top Of Back Rail Of Size 430 X 50 X 30Mm 8 ( H ) All As Per Sl Item No 1 Above But Side Rail Of Size 460 X 75 X 30Mm 9 ( J ) Removing Un Serviceable Foam Cushion Of Chair Dining, Supply And Fix 32Density 470X400x75mm U Foam Cushioned, Covered With Leatherite Cloth On 12Mm Thick Ply Wood As Existing Of Approved Shade & Qualityby Ge / Engr-In-Charge. 10 ( K ) Polishing With Two Or More Coatsof Chair Dining With French Polish To Obtain Glossy Finish After Preparation Of Polishing Area With Abrasive Cloth All As Specified And As Directed. 11 Chair Writing ( Fd-280 Fd-16 Fd-20 ) :- ( A ) Removing Un Serviceable Components And Replacing The Same With Seasoned Teak Wood To Match With Existing For Front Legs Size 675X45x45mm. 12 ( B ) All As Per Sl Item No 11 Abvebut Rear Legs Of Size 890X65x65mm. 13 ( C ) All As Per Sl Item No 11 Above 3 But Armsof Size 495X50x19mm. 14 ( D ) All As Per Sl Item No 11 Above But Front Rail Of Size 490X65x30mm. 15 ( E ) All As Per Sl Item No 11 Above But Rear Rail Of Size 440X65x30mm. 16 ( F ) All As Per Sl Item No 11 Above But Side Rail Of Size 475X65x30mm. 17 ( G ) All As Per Sl Item No 11 Above But Stiffner Of Size 490X25x19mm. 18 ( H ) All As Per Sl Item No 11 Above But Teak Wood Back Of Size 445X65x12mm. 19 ( I ) Removing Of Existing Cane, Cleaning Of Cane Holes And Recanning With 2 Mm Wide New Plastic Cane For Seat And 3.5 Mm Wide Cane For Borders Of Chair All As Per Drawing, All As Specified And As Directed. ( For Chair 0.46 X 0.43 =0.1978 ) . 20 ( J ) Polishing Of Chair Writing With French Polish To Obtain Glossy Finish After Preparation Of Polishing Area With Abbrassive Cloth And All As Specified And As Directed. 21 Chair Wooden Bottom ( Fd-56, Fd-285 & Fd-225 ) :- ( A ) Removing Un Serviceable Components And Replacing The Same With Seasoned Teak Wood To Match With Existing For Front Legs Of Size 445X50x50mm. 22 ( B ) All As Per Sl Item No 29 Above But Rear Legs Of Size 840X65x40mm. 23 ( C ) All As Per Sl Item No 29 Abovebut Front Rail Of Size 415X25x65mm. 24 ( D ) All As Per Sl Item No 29 Above Butrear Rail Of Size 375X25x65mm. 25 ( E ) All As Per Sl Item No 29 Above But Side Rail Of Size 400X25x65mm. 26 ( F ) All As Per Sl Item No 29 Above But Wooden Stiffner Of Size 400X25x19mm. 27 ( G ) All As Per Sl Item No 29 Above But Wooden Back Of Size 375X50x12mm. 28 ( H ) Removing The Exising Seat Of Chair, Supply And Fix New Commercialplywood Of Size435x435mm X 6Mm Thick All As Specified And As Directed. 29 ( I ) Polishing With Two Or More Coats Of Chair Wooden Bottom With French Polish To Obtain Glossy Finish After Preparation Of Polishing Area With Abrassive Cloth, All As Specified And As Directed. 30 Chair Dining ( Fd-16, Fd-279 ) :- ( A ) Removing Un Serviceable Components And Replacing The Same With Seasoned Teak Wood To Match With Existingfor Front Legs Of Size 460X30x55mm. 31 ( B ) All As Per Sl Item No. 1 Above But Rear Legs Of Size 890X55x30mm 32 ( C ) All As Per Sl Itemno 1 Above But Front Rail Of Size 420X65x30mm. 33 ( D ) All As Per Sl Item No 1 Above But Rear Rail Of Size 430X65x30mm. 34 ( E ) All As Per Sl Item No 1 Above But Side Rail Of Size 430X65x30mm. 35 ( F ) All As Per Sl Item No 1 Above But Back Wooden Of Size 440X45x15mm. 36 ( G ) All As Per Sl Item No 1 Above But Stiffner Of Size 440X25x20mm. 37 ( H ) Removing Of Existing Cane, Cleaning Of Cane Holes And Recanning With 2 Mm Wide New Plastic Cane For Seat And 3.5 Mm Wide Cane For Borders Of Chair All As Per Drawings, All As Specified And As Directed. ( For Chair 0.40X0.39 =0.156 Sqm ) 38 ( I ) Polishing With Two Or More Coatsof Chair Dining With French Polish To Obtain Glossy Finish After Preparation Of Polishing Area With Abrasive Cloth All As Specified And As Directed. 39 Chair Easy ( Fd-229 / Fd-17 ) :- ( A ) Removing Un Serviceable Components And Replacing The Same With Seasoned Teak Wood To Match With Existing For Legs Ofsize 535X40x40mm. 40 ( B ) All As Per Sl Item No 10 Above But Arms Of Size610x55x25mm. 41 ( C ) All As Per Sl Item No 10 Above But Front Rail Of Size 520X55x25mm. 42 ( D ) All As Per Sl Item No 10 Above But Rear Rail Of Size 500X50x25mm. 43 ( E ) All As Per Sl Item No 10 Above But Side Rail Of Size 530X70x25mm. 44 ( F ) All As Per Sl Item No 10 Above But Top / Bottom Rail, Back Frame Of Size 480X55x19mm 45 ( G ) All As Per Sl Item No 10 Abovebut Side Rail Back Frame Of Size 530X70x25mm. 46 ( H ) Removing Of Existing Cane, Cleaning Of Cane Holes And Recanning With 2 Mm Wide New Plastic Cane For Seat And 3.5 Mm Wide Cane For Borders Of Chairall As Per Drawing, All As Specified And As Directed. ( For Chair Seat 0.51X0.45=0.2295 Sqm ) ( Back 0.43X0.34=0.1462 Sqm ) Total 0.3757 Sqm 47 ( I ) Polishing Witht Two Or More Coats Of Chair Easy With French Polish To Obtain Glossy Finish After Preparation Of Polishing Area With Abbrassive Cloth All As Specified And As Directed. 48 Chair Dining Jco / Ors ( Fd-23 ( M ) , Fd-206, Fd-233, Fd-361, Fd-362 ) :- ( A ) Removing Un Serviceable Components And Replacing The Same With Seasoned Teak Wood To Match With Existingfor Fornt Legs As Per Drawing And Asper Specifications. 49 ( B ) All As Per Sl Item No 48 Abovebut Rear Legs As Per Drawing And Specification. 50 ( C ) All As Per Sl Item No 48 Abovebut Fornt Rail As Per Drawing And Specification. 51 ( D ) All As Per Sl Item No 48 Above But Rear Rail As Per Drawing And Specification. 52 ( E ) All As Per Sl Item No 48 Above But Side Rail As Per Drawing And Specification. 53 ( F ) All As Per Sl Item No 48 Above But Back Wooden As Per Drawing And Specification. 54 ( G ) All As Per Sl Item No 48 Above Stiffner As Per Drawing And Specification. 55 ( H ) Removing The Existing Un Serviceable Plastic Seat From Chair Dining Jco / Ors, Supply And Fix New Plastic Seat Duly Finished And Complete To Match The Original As Shown On Drawing All As Specified And As Directed. 56 ( I ) Polishing With Two Or More Coats Of Chair Dining Jco / Ors With French Polish To Obtain Glossy Finish After Preparation Of Polishing Area With Abrassive Cloth All As Specified And As Directed. 57 Repairs To Table 900X900x760mm ( Fd-88 ( M ) , Fd-94 ( M ) , Fd-291, Fd-352 ) :- ( A ) Removing Of Old Un Serviceable Existing Top From Table And Supply And Fix New Top Of Size As Per Drawing. Top Shall Be 18 / 19Mmthick Pre-Laminated Particle Boardas Approved By Ge Conforming To Is-12823 Grade-I Type-Ii Exterior Grade Duly Screwed, Edging All Round The Top Shall Be Provided With 04Mm Teak Wood Beading All As Specified And As Directed. 58 ( B ) Removing Of Old Un Serviceable Leg, Supply And Fix New Leg Made Out Of Teak Wood As Per Drawing Duly Finished And Completed To Match With The Existing Surfaces Of The Item All As Specified And As Directed. 59 ( C ) Removing The Existing Un Serviceable Long Rail / Short Railfrom Table 900X900x760mm, Supply And Fix New Long Rail Made Out Of Teak Wood Duly Finished And Completed To Match The Original As Shown On Drawing All As Specified And As Directed. 60 ( E ) Removing The Existing Un Serviceable Stiffnersfrom Table 900X900x760mm, Supply And Fix New Stiffners Made Out Of Teak Wood Duly Finished And Complete To Match The Original As Shown On Drawing All As Specified And As Directed. 61 ( F ) Polishing With Two Or More Coats Oftable 900X900x760mm With French Polish To Obtain Glossy Finish After Preparation Of Polishing Area With Abrassive Cloth All As Specified And As Directed. 62 Table 4X3 ( 1200X900 ) ( Fd-273, Fd / E6 / Mpp / 11 / 03 ) :- ( A ) Removing Of Old Un Serviceable Existing Top Surface, Supply And Fix New Top Of Size As Shown On Drawing, Top Shall Be 18 / 19Mm Thick Pre-Laminated Particle Board As Approved By Ge Conforming To Is-12823 Grade-I Type-Ii Exterior Grade Duly Screwed, Edging All Round The Top Shall Be Provided With 04Mm Thick Teak Wood Beading , All Exposed Faces Of Timber Shall Be Treated With French Polish All As Specified And As Directed. 63 ( B ) Removing Of Old Un Serviceable Leg, Supply And Fix New Leg Made Out Of Teak Wood Complete As Shown On Drawing All As Specified And As Directed. 64 ( C ) Removing Of Old Un Serviceable Long Rail, Supply And Fix New Long Rail Made Out Of Teak Woodof Size And Other Details Complete As Shown On Drawing All As Specified And As Directed. 65 ( D ) Removing Of Old Un Serviceable Short Rail, Supply And Fix New Short Rail Made Out Of Teak Wood Size & Other Details Complete As Shown On Drawing All As Specified And As Directed. 66 ( E ) Removing The Existing Un Serviceable Stiffnersfrom Table 1200X900mm, Supply And Fix Newstiffners Made Out Of Teak Wood Duly Finished And Completed To Match The Original As Shown On Drawing All As Specified And As Directed. 67 ( F ) Polishing With Two Or More Coats Oftable 1200X900x760mm With French Polish To Obtain Glossy Finish After Preparation Of Polishing Area With Abrassive Cloth All As Specified And As Directed. 68 Repairs To Table 900X600x760mm ( With / Without Drawer ) ( Fd-41 ( M ) , Fd-42 ( M ) , Fd-55 ( M ) , Fd-223, Fd-224, Fd-283, Fd-284 ) ( A ) Removing Of Oldun Serviceable Existing Top From Table 900X600x760mm ( With / Without Drawer ) , Supply And Fix New Top Of Size As Per Drawing, Top Shall Be 18 / 19Mm Thick Pre-Laminated Particle Board As Approved By Ge Conforming To Is-12823 Grade-I Type-Ii Exterior Grade Duly Screwed, Edging All Round The Top Shall Be Provided With 04Mm Teak Wood Beading Complete All As Specified And As Directed. 69 ( B ) Removing Of Old Un Serviceable Legfrom Table 900X600x760mm ( With / Without Drawer ) , Supply And Fix New Leg Made Out Of Teak Wood As Per Drawing, Duly Finished & Completed To Match With The Existing Surfaces Of The Item All As Specified And As Directed. 70 ( C ) Removing The Existing Un Serviceable Long Railfrom Table 900X600x760mm ( With / Without Drawer ) , Supply And Fix New Long Rail Made Out Of Teak Wood Duly Finished And Completed To Match The Original As Shown On Drawing All As Specified And As Directed. 71 ( D ) Removing The Existing Un Serviceable Short Rail From Table 900X600x760mm ( With / Without Drawer ) , Supply And Fix New Long Rail Made Out Of Teak Wood Duly Finished Andcompleted To Match The Original As Shown On Drawing All As Specified And As Directed. 72 ( E ) Removing The Existing Un Serviceable Stiffnersfrom From Table 900X600x760mm ( With / Without Drawer ) , Supply And Fix New Stiffners Made Out Of Teak Wood Duly Finished And Completed To Match The Original As Shown On Drawing, All As Specified And As Directed. 73 ( F ) Removing The Existing Un Serviceable Drawer From Table 900X600x760mm ( With Drawer ) , Supply And Fix New Drawer Made Out Of 12 Mmthickplywood Duly Fixed The Stainless Steel Knobs Etc All As Specified And As Directed. 74 ( G ) Polishing With Two Or More Coats Of Table 900X900x760mm With French Polish To Obtain Glossy Finish After Preparation Of Polishing Area With Abrassive Cloth All As Specified And As Directed. 75 Supply And Fix 15Mm Dia Pvc Bush On The Legs Of Table With 10Mm Long Stainless Steel Screws For Various Types Of Wooden Tables Large / Small ( Small Size ) All As Specified And As Directed. 76 Supply And Fix 20Mm Dia Pvc Bush On The Legs Of Table With 15Mm Long Stainless Steel Screws For Various Types Of Wooden Tables Large / Small ( Large Size ) All As Specified And As Directed. 77 Repairs To Table Dining 6 Persons ( Fd-30 ( M ) , Fd-239, Fd-269, Fd-273 ) :- ( A ) Removing Of Old Un Serviceable Existing Top From Table, Supply And Fix New Top Of Size As Per Drawing, Top Shall Be 18 / 19Mm Thick Pre-Laminated Particle Boardas Approved By Ge Conforming To Is-12823 Grade-I Type-Ii Exterior Grade Duly Screwed, Edging All Round The Top Shall Be Provied With 04Mm Thick Teak Wood Beading All As Specified And As Directed. 78 ( B ) Removing Of Old Un Serviceable Leg, Supply And Fix New Leg Made Out Of Teak Wood As Per Drawing Including French Polishing To Repaired Portion Only To Match The Existing Surfaces Of The Item All As Specified And As Directed. 79 ( C ) Removing The Existing Un Serviceable Long Railfrom Table Dining 06 Pers, Supply And Fix New Long Rail Made Out Of Teak Wood Duly Finished And Completed To Match The Original As Shown On Drawing All As Specified And As Directed. 80 ( D ) Removing The Existing Un Serviceable Short Rail From Table Dining 06 Pers, Supply And Fix New Short Rail Made Out Of Teak Wood Duly Finished And Complete To Match The Original As Shown On Drawing All As Specified And As Directed. 81 ( E ) Removing The Existing Un Serviceable Stiffnersfrom Table Dining 06 Pers, Supply And Fix New Stiffners Made Out Of Teak Wood Duly Finished And Completed To Match The Original As Shown On Drawing All As Specified And As Directed. 82 ( F ) Polishing With Two Or More Coats Oftable Dining 06 Pers With French Polish To Obtain Glossy Finish After Preparation Of Polishing Area With Abrassive Cloth All As Specified And As Directed. 83 Repairs To Table Dining 8 Persons ( Fd-30 ( M ) , Fd-239, Fd-273, Fd-376 ) :- ( A ) Removing Of Old Un Serviceable Existing Top From Table, Supply And Fix New Top Of Size As Per Drawing, Top Shall Be 18Mm Thick Pre-Laminated Particle Boardas Approved By Ge, Conforming To Is-12823 Grade-I Type-Ii Exterior Grade Duly Screwed, Edging All Round The Top Shall Be Provided With 04Mm Teak Wood Beading All As Specified And As Directed. 84 ( B ) Removing Of Old Un Serviceable Leg And Supply And Fix New Leg Made Out Of Teak Wood As Per Drawing Duly Finished And Completed To Match The Existing Surfaces Of The Item All As Specified And As Directed. 85 ( C ) Removing The Existing Un Serviceable Long Railfrom Table Dining 08 Pers, Supply And Fix New Long Rail Made Out Of Teak Wood Duly Finished And Completed To Match The Original All As Specified And As Directed. 86 ( D ) Removing The Existing Un Serviceable Short Railfrom Table Dining 08 Pers, Supply And Fix New Short Rail Made Out Of Teak Wood Duly Finished And Completed To Match The Original All As Specified And As Directed. 87 ( E ) Removing The Existing Un Serviceable Stiffnersfrom Table Dining 08 Pers, Supply And Fix New Stiffners Made Out Of Teak Wood Duly Finished And Completed To Match The Original All As Specified And As Directed. 88 ( F ) Polishing With Two Or More Coats Oftable Dining 08 Pers With French Polish To Obtain Glossy Finish After Preparation Of Polishing Area With Abrassive Cloth All As Specified And As Directed. 89 Repair To Table Bed Side ( Fd-210, Fd-248, Fd- 276 ) :- ( A ) Removing Of Old Un Serviceable Existing Top, Supply And Fix New Top Of Table Bed Side Made Up Of 18 / 19 Mm Thick Pre-Laminated Particle Board Of Shade Bavarian Beech Exterior Grade Of Size 450X350mmall As Specified And As Directed. 90 ( B ) Removing Of Old Un Serviceable Sides Of Table Bed Side, Supply And Fix New Sides Of Table Bed Side Made Out Of 18 / 19Mm Thick Pre-Laminated Particle Board Of Shade Bavarian Beech Exterior Grade Of Size 450X300mmall As Specified And As Directed. 91 ( C ) Removing Of Unserviceable Ply Wood Back, Supply And Fix New Back Made Out Of6mm Thick Commercial Plywood Of Table Bed Side Of Required Sizeall As Specified And As Directed. 92 ( D ) Removing Of Unserviceable Shelf / Base Of Table Bed Side, Supply And Fix New Shelf / Base Made Out Of 18 / 19Mm Pre-Laminated Particle Board Exterior Grade All As Specified And As Directed. 93 ( E ) Polishing With Two Or More Coats Oftable Bed Side With French Polish To Obtain Glossy Finish After Preparation Of Polishing Area With Abrassive Cloth All As Specified And As Directed. 94 Repair To Table Centre ( Fd-29 ( M ) , Fd-134 ( M ) , Fd-152 ( M ) , Fd-235, Fd-274, Fd-393 ) :- ( A ) Removing Of Old Un Serviceable Existing Top From Table, Supply And Fix New Top Of Size As Per Drawing, Top Shall Be 18 / 19Mmthick Pre-Laminated Particle Board Exterior Grade As Approved By Ge Conforming To Is-12823 Grade-I Type-Ii Duly Screwed, Edging All Round The Top Shall Be Provided With 4Mm Thick Teakwoodbeading All As Specified And As Directed. 95 ( B ) Removing Of Old Un Serviceable Leg, Supply And Fix New Leg Made Out Of Teak Wood As Per Drawing Complete To Match The Existing Surfaces Of The Item All As Specified And As Directed. 96 ( C ) Removing The Existing Un Serviceable Long Railfrom Table Centre, Supply And Fix New Long Rail Made Out Of Teak Wood Duly Finished And Complete To Match The Original As Shown On Drawing All As Specified And As Directed. 97 ( D ) Removing The Existing Un Serviceable Short Rails From Table Centre, Supply And Fix New Short Rails, Made Out Of Teak Wood Duly Finished And Complete To Match The Original As Shown On Drawing All As Specified And As Directed. 98 ( E ) Removing The Existing Un Serviceable Stiffners From Table Centre, Supply And Fix New Stiffners Made Out Of Teak Wood Duly Finished And Complete To Match The Original As Shown On Drawing All As Specified And As Directed. 99 ( F ) Polishing With Two Or More Coats Oftable Center With French Polish To Obtain Glossy Finish After Preparation Of Polishing Area With Abrassive Cloth All As Specified And As Directed. 100 Repairs To Table Peg ( Fd-25 ( M ) , Fd-236, Fd-266, Fd-277, Fd-384 ) :- ( A ) Removing Of Old Un Serviceable Existing Top From Table, Supply And Fix New Top Of Size As Per Drawing, Top Shall Be 18 / 19 Mm Thick Pre-Laminated Particle Board Exterior Grade As Approved By Ge Conforming To Is-12823 Grade-I, Type-Ii, Duly Screwed, Edging All Round The Top Shall Be Of 4Mm Thick Teakwood All As Specified And As Directed. 101 ( B ) Removing Of Old Un Serviceable Leg, Supply And Fix New Leg Made Out Of Teak Wood As Per Drawing Complete To Match The Existing Surfaces Of The Item All As Specified And As Directed. 102 ( C ) Removing The Existing Un Serviceable Long Rails From Table Peg, Supply And Fix New Long Rails Made Out Of Teak Wood Duly Finished And Complete To Match The Original As Shown On Drawing All As Specified And As Directed. 103 ( D ) Removing The Existing Un Serviceable Short Rails From Table Peg, Supply And Fix New Short Rail Made Out Of Teak Wood Duly Finished Complete To Match The Original As Shown On Drawing All As Specified And As Directed. 104 ( E ) Removing The Existing Un Serviceable Stiffners From Table Peg, Supply And Fix New Stiffners Made Out Of Teak Wood Duly Finished Complete To Match The Original As Shown On Drawing All As Specified And As Directed. 105 ( F ) Polishing With Two Or More Coats Oftable Peg With French Polish To Obtain Glossy Finish After Preparation Of Polishing Area With Abrassive Cloth All As Specified And As Directed. 106 Repairs To Teapoy Wooden ( Fd-34 ( M ) , Fd-232, Fd-278, Fd-382 ) :- ( A ) Removing Of Old Un Serviceable Existing Top From Table, Supply And Fix New Top Of Size As Per Drawing, Top Shall Be 18 / 19Mm Thick Pre-Laminated Particle Board Exterior Grade As Approved By Ge Conforming To Is-12823 Grade-I, Type-Ii, Duly Screwed, Edging All Round The Top Providing With 4Mm Thick Teakwood Beading All As Specified And As Directed. 107 ( B ) Removing Of Old Un Serviceable Leg, Supply And Fix New Leg Made Out Of Teak Wood As Per Drawing Complete To Match The Existing Surfaces Of The Item All As Specified And As Directed. 108 ( C ) Removing The Existing Un Serviceable Long Rail From Teapoy Wooden, Supply And Fix New Long Rail Made Out Of Teak Wood Duly Finished And Complete To Match The Original As Shown On Drawing All As Specified And As Directed. 109 ( D ) Removing The Existing Un Serviceable Short Rail From Teapoy Wooden, Supply And Fix New Short Rail Made Out Of Teak Wood Duly Finished Complete To Match The Original As Shown On Drawing All As Specified And As Directed. 110 ( E ) Removing The Existing Un Serviceable Stiffners From Teapoy Wooden, Supply And Fix New Stiffners Made Out Of Teak Wood Duly Finished And Complete To Match The Original As Shown On Drawing All As Specified And As Directed. 111 ( F ) Polishing With Two Or More Coats Ofteapoy With French Polish To Obtain Glossy Finish After Preparation Of Polishing Area With Abrassive Cloth All As Specified And As Directed. 112 Repairs To Table Dressing Ladies ( Fd-32 ( M ) , Fd-251, Fd-378 ) ( A ) Removing Of Old Un Serviceable Mirror From Table Dressing Ladies, Supply And Fix New Mirror Of Size 1220 X 365 X 5 Mm Thick, Duly Fixed With Frame All As Specified And As Directed. 113 ( B ) Removing Of Old Un Serviceable Plastic Laminated Sheet From The Top Of Table And Providing New Plastic Laminated Sheet 1.00Mm Thick Duly Fixed With Synthetic Adhesive All As Specified And As Directed. 114 ( C ) Removing Of Old Un Serviceable Glass Shutters And Aluminium Channels And Providing New Sliding Glass Shutters Duly Fixed With New Aluminium Channels All As Specified And As Directed. 115 ( D ) Removing Of Old Un Serviceable Drawer With Knobs And Providing Of New Drawers Of Pre-Laminated Particle Board 18 / 19 Mm Thick For Sides And 6 Mm Thick Ply Wood Commercial Isi Markedfor Bottom Including Chromium Plated Knobs All As Specified And As Directed. 116 ( E ) Polishing With Two Or More Coats Oftable Dressing Ladieswith French Polish To Obtain Glossy Finish After Preparation Of Polishing Area With Abrassive Cloth All As Specified And As Directed. 117 Repairs To Table Dressing Gents ( Fd-31 ( M ) , Fd-230, Fd-379 ) :- ( A ) Taking Down Un Serviceable Broken Mirror, Supply And Fix New Mirror 760X365x5mm Thick, Duly Fixed With Frame All As Specified And As Directed. 118 ( B ) Removing Of Un Serviceable Laminated Sheet From Top Of Table And Providing New Plastic Laminated Sheet 1.00 Mm Thick Of On Top Duly Fixed With Synthetic Adhesive As Per Drawing All As Specified And As Directed. 119 ( C ) Removing Of Old Un Serviceable Drawer & Knobs And Providing New Drawer Made Out Of Teak Wood 12Mm Thick Pre-Laminated Particle Board For Side And 06Mm Thick Ply Wood Commercial For Bottom Including Knobs Cp All As Specified And As Directed. 120 ( E ) Polishing With Two Or More Coats Oftable Dressing Gentswith French Polish To Obtain Glossy Finish After Preparation Of Polishing Area With Abrassive Cloth All As Specified And As Directed. 121 Stool Dressing Cushioned ( Fd / E6 / Map / 14 ( R ) :- ( A ) Removing Un Serviceable Components And Replacing The Same With Seasoned Teak Wood To Match With Existing For Legs Of Size 380 X 55 X 40Mm. 122 ( B ) All As Per Sl Item No 112 Above But Side Rail Of Size 260 X70 X 20Mm. 123 ( C ) All As Per Sl Item No 112 Above But Front / Back Rail Of Size 390 X 70 X 20Mm. 124 ( D ) All As Per Sl Item No 112 Above For Side Stiffner Of Size 270 X 25 X 25Mm. 125 ( E ) Removing Un Serviceable Foam Cushion Of Stool Dressing, Supply And Fix 32 Density 450X300x75mm U Foam Cushioned, Covered With Leatherite Cloth On 12Mm Thick Ply Wood As Existing Of Approved Shade And Quality All As Specified And As Directed. 126 ( F ) Polishing With Two Or More Coats Ofstool Dressing Cushionedwith French Polish To Obtain Glossy Finish After Preparation Of Polishing Area With Abrassive Cloth All As Specified And As Directed. 127 Bin Soiled Linen Large ( Fd-212 / 244 ) ( A ) Removing Of Un Serviceabletop From Bin Linen Large, Supply And Fix New Top Of Size 900X450mm Made Out Of 6Mm Veneer Decorative Plywood Along With 45X19mm Teak Wooden Batten Frame All As Specified And As Directed. 128 ( B ) Removing Of Un Serviceable Bottomply From Bin Linen Large, Supply And Fix New Bottomby 12Mm Thick Commercial Plywood Of Size 900X450 All As Specified And As Directed. 129 ( C ) Removing Of Un Serviceable Front Portion From Bin Linen Large, Supply And Fix New Front Portion With 6Mm Thick Veneered Decorative Plywood Duly Fixed With Teak Wood Beading Of Size 45X45x25mm Completeall As Specified And As Directed. 130 ( D ) Removing Of Un Serviceable Legs From Bin Andsupply And Fix New Legs Made Out Of Well Seasoned Tw All As Specified And As Directed. 131 ( E ) Removing Of Un Serviceable Canning Patti From Bin Andsupply And Fix New Caning Patti To Bin Soiled Linen Small All As Specified And As Directed. 132 ( F ) Removing Of Un Serviceable Stopper From Bin Andsupply And Fix New Stopper Of Sizes 25X25x150mm Of Well Seasoned Tw All As Specified And As Directed. 133 ( G ) Removing Of Exsting Cane, Cleaning Of Cane Holes And Recaining With 2Mm Wide New Plastic Cane For Side And 3.5Mm Wide Cane For Borders Of Bin Soiled Linen Where Canning Is Involvedall As Specified And As Directed. ( For Bin Soiled Linen = 0.27X 0.24 =0.0648 ) 134 ( H ) Polishing With Two Or More Coats Ofbin Linenwith French Polish To Obtain Glossy Finish After Preparation Of Polishing Area With Abrassive Cloth All As Specified And As Directed. 135 Side Board ( Fd-371 / 241 ) ( A ) Removing Of Existing Un Serviceable Back, Supply And Fix Newback Of Side Board With 6Mm Thickcommercialply Wood Of Size 1220X635mm All As Specified And As Directed. 136 ( B ) Removing Of Existing Un Serviceable Frontshuttersand Supply And Fix Newshutters Of Size 390X595 Mm Made Out Of Pre- Laminated Particle Board 18Mm Both Side Teak Shadeall As Per Existing Duly Fixed With Aluminium Anodised Knobswith Ball Spring Catch All As Specified And As Directed. 137 ( C ) Removing Of Existing Un Serviceable Legs And Supply And Fix Newlegs Of Size 15X45x45mm Made Out Ofseasoned Tw All As Specified And As Directed. 138 ( D ) Removing Of Existing Un Serviceable Drawers, Supply And Fix Newdrawers Of 12Mm Thick Veneered Decorative Plywood All As Per Existing With 6Mm Thick Commercial Plywood For Bottom Of Drawer Alongwith Aluminum Anodised Knob All As Specified And As Directed. 139 ( E ) Removing Of Un Serviceable Shelves From Side Board, Supply And Fix New Shelves As Per Existing Shape And Size Made Out Of18mm Thick Particle Board One Side Teak Faced All As Specified And As Directed. 140 ( F ) Removing Of Un Serviceable Side, Supply And Fix New Side With Prelaminated Particle Board 18 Mm Thick One Sideteak Veneer As Per Existing Shape And Size All As Specified And As Directed. 141 ( G ) Polishing With Two Or More Coats Of Side Board With French Polish To Obtain Glossy Finish After Preparation Of Polishing Area With Abrassive Cloth All As Specified And As Directed. 142 Table Writing ( Fd-275 / , Fd 33 ( M ) ( A ) Removing The Exising Un Serviceable Top Of Table Writing, Supply And Fix New Top Made Out Of 18 / 19Mm Thick Pre-Laminated Particle Board One Sidedecorative Teak Shade And Balancing White Shade To The Other Side With 4Mm Thick Teak Wood Edging All Roundas Per Drawing All As Specified And As Directed. 143 ( B ) Removing Un Serviceable Shutters, Supply And Fix Newshuttesr To Shelf Of Size 355X45mm X 18Mm Thick Prelaminated Particle Board Both Sidedecorative Teak Shade With 4Mm Thick Seasoned Teak Woodedging All Round, Shutters Shall Be Provided With One Aluminium Anodised Knob Andto Be Fixed With Mild Steel Bright Finish 30Mm Flap Piano Hinges All As Specified And As Directed. 144 ( C ) Removing The Exising Un Serviceable Legs Of Table, Supply And Fix Newteak Wood Legs Of Table Writing Of Size 140 X 45 X 45Mm All As Per Existing All As Specified And As Directed. 145 ( D ) Removing The Exising Un Serviceable Stiffner Of Table, Supply And Fix New Stiffner Of Bottomof Size 975X50x25mm Of Seasoned 1St Class Tw As Per Existing All As Specified And As Directed. 146 ( E ) Removing Un Serviceable Drawer, Supply And Fix New Drawer Of Table Writing Made With 6Mm Commercial Plywood To Bottom, 3 Sides With 12Mm Thick Wooden Planks And 19Mm Thick Pre-Laminated Particle Board Exterion Grade To Front Portion, The Drawer Shall Be Fixed With Aluminium Anodised Knob Rest All As Specified And As Directed. 147 ( F ) Removing Of Un Serviceable Back Ply From Table Writing, Supply And Fix New Back Ply Of 6Mm Thick Commercial Plywood Bwr Gradeas Per Existing Shape And Size All As Specified And As Directed. 148 ( G ) Removing Un Serviceable Bottom, Supply And Fix New Bottom Of Table Writing With 18Mm Pre-Laminated Particle Board Exterior Grade As Per Existing Shape And Size All As Specified And As Directed. 149 ( H ) Polishing With Two Or More Coats Of Table Writing With French Polish To Obtain Glossy Finish After Preparation Of Polishing Area With Abrassive Cloth All As Specified And As Directed. 150 Repairs To Hat Stand With Mirror Small / Large ( Fd-23 ( M ) , Fd-206, Fd-233, Fd-361, Fd-362 ) ( A ) Removing Of Old Un Serviceable Ply Wood Of Hat Stand, Supply And Fix New Ply Wood 3.5Mm Thickisi Marked One Side Teak Faced, 4Mm Thick Teak Wood Edging Shall Be Provided All As Per Drawing, As Specified And As Directed. 151 ( B ) Removing Of Old Un Serviceable Pegs Of Hat Stand And Supply And Fix New Metal Pegs ( Cp ) All As Specified And As Directed. 152 ( C ) Removing Of Old Un Serviceable Broken Mirror Of Hat Stand And Supply And Fix 04Mm Thick New Mirror All As Specified And As Directed. 153 ( D ) Removing Of Old Un Serviceable Ply Wood From Back Of Hat Stand And Supply And Fix New Ply Wood 6 Mm Thick Commercial Isi Marked Duly French Polished All As Specified And As Directed. 154 ( E ) Polishing With Two Or More Coats Of Hat Stand With Mirror Small With French Polish To Obtain Glossy Finish After Preparation Of Polishing Area With Abrassive Cloth All As Specified And As Directed. 155 Material And Labour For Polishing With Two Or More Coatsof Following Wooden Furniture With French Polish Including Preparation Of Old Wooden Surfaces, Applying French Polish To Obtain Glossy Finish Complete All As Specified And As Directed. ( A ) Book Shelve Open Large ( Db-4121 ) 156 ( B ) Book Case Open Small ( Db-4121 ) 157 ( C ) Chair Draftsman ( Fd-03, Fd-204 ) 158 ( E ) Chair Easy With Cushion ( Fd-358 ) 159 ( F ) Chair Dining Long Back ( Fd-357 ) 160 ( G ) Desk School Type A ( F-20 ) 161 ( H ) Display Board Notice 4`X4` ( Fd-99 ( M ) ) 162 ( I ) Book Case Fd / Np ( Db-3957, Fd-45, Fd-237 ) 163 ( J ) Book Case Gd ( Tp ) 164 ( K ) Book Shelve Open Small ( Db-4071 ) 165 ( L ) Table 6 X 3- 6 ( Tp ) 166 ( M ) Table Office Clerk ( Db-4120 ) 167 ( N ) Table Office Officer ( Db-4119 ) 168 ( O ) Table Draftsman ( Db-4117 ) 169 ( P ) Table Card ( Fd-91, Fd-352 ) 170 ( Q ) Display Board Notice 6X4 ( Fd-99 ( M ) ) 171 ( R ) Display Board 1820X 1220 Mm ( Cwe / Kke / 99 / Sfd-31 ) 172 ( S ) Locker Bed Side ( Db-4174, Fd-54, Fd-222 ) 173 ( T ) Mirror With Shelve ( Fd-52 ( M ) ) 174 ( U ) Mirror Large 4`X2` ( Fd-52 ( M ) , Tp ) 175 ( V ) Rack Side 3 Spaces ( Db-4123 ) 176 ( W ) Rack Boot ( F-12 ) 177 ( X ) Rack Without Drawer ( F-35 ) 178 ( Y ) Rack Wooden 5 X 3 X 2-1 ( F-12 ) 179 ( Z ) Stool 2` Height ( F-2 ) 180 ( Aa ) Stool Of Sort 2 To 2-10 ( Db-2365 ) 181 ( Ab ) Table 2 X 2 ( Db-4085, Fd-95, Fd293 ) 182 ( Ac ) Tabl 5 X 2-10 ( Db-2648 )
