Providing And Applying Waterproof And Heat Resistant Coating At Rbi Ahmedabad., ahmedabad-Gujarat

1 Providing And Applying Waterproof And Heat Resistant Coating At Rbi Ahmedabad. Surface Preparation: Carefully Dismantling Existing Waterproofing Treatment Of Concrete Screed Up To Brick Bat Coba Top Surface ( I.E Average Thickness Of 75 Mm. Manually / With The Help Of Mechanical Cutter Including Removing / Scrapping Of Waterproofing Coating Of Parapet Walls . Preparing The Surface Thoroughly By Cleaning, Washing And Removing Dust, Dirt, Oil, Grease, Fungus And Loose Particles With Brush. Removing All The Dismantled Material From The Bank`S Premises Etc., Complete All As Directed By The Bank`S Engineer. 2 2 Providing And Applying Waterproof And Heat Resistant Coating At Rbi Ahmedabad. Screed Concrete Work: Providing And Laying Waterproof Screed Cement Concrete Over Existing Bb Coba Of Terrace At Bank?S Main Building, With The Following Specifications. A ) Applying Bond Coat Of Modified Styrene Butadiene Latex Mix Supplied As A Ready To Use Bonding Agent In Liquid Consistency For Repairing & Waterproofing Of Terraces As It Bonds Strongly To Old & New Concrete In The Ratio Of 1:1 ( Latex Mix 1: Cement 1 ) By Volume To Make It Lump Free Slurry When Applied On In The Pre Wet Surface. For More Instructions, Refer To Schedule Of Quantities 3 3 Providing And Applying Waterproof And Heat Resistant Coating At Rbi Ahmedabad. Providing And Applying Waterproof Chemical Coating With Fiber Glass Mesh With Following Specifications: A ) Providing, Mixing And Applying One Coat Of Acrylic Emulsion Waterproofing Primer Diluted With Water In The Ratio 2:1 Spreading At The Rate Of 8.0 ? 10.0 / Sq.Mt / Liter In The Ssd Condition. For More Instructions, Refer To Schedule Of Quantities 4 4 Providing And Applying Waterproof And Heat Resistant Coating At Rbi Ahmedabad. Providing, Mixing And Applying Single Coat Of Penetrating Acrylic Waterproofing Primer For Superior Bonding And Dilute With Water In The Ratio 2:1 Spreading At The Rate Of 8-10 Sq.Mt / Litre / Coat. Allow The Primer To Cure According Its Technical Instructions. Use Acrylic Elastomeric Exterior Waterproof Coating Directly From The Container. Stir Contents Well Before Use. Providing & Applying Two Coats Of Acrylic Elastomeric Exterior Waterproof Coating Without Dilution By Brush Or Roller At A Time Interval Of 5-6 Hours. The Material Shall Be Applied Un-Diluted To Achieve Coverage 3.0 - 3.5 Sqm / Litre / In Two Coats. Work Shall Be Carried Out In Work Man Like Manner And As Directed By Banks Engineer And As Per Manufacturers Specifications.

Refer document

Refer document

Refer document