Tender For Construction Of Day Care Sub-Centre Building At Ghosaramal Phc Under Naktideul Block
Tender Value
37.65 Lakhs
Estimated cost
Bid Submission
08 May 2023
0 days left
EMD
37651
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
naktideul → Odisha
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Day Care Sub-Centre Building At Ghosaramal Phc Under Naktideul Block
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 24-Apr-2023 | 1st Corrigendum | Date | 08-May-2023 |
| 2 | 03-May-2023 | 2nd Corrigendum | Fee | 08-May-2023 |
BOQ
| Sl. No. | Item Description |
| 1 | GROUND FLOOR |
| 2 | Earth work in excavation in foundation in hardwith initial leads and lifts including dressing and leveling the bed and depositing the excavated earth at places away from work site withall leads and lifts including cost of all labour and T&Pand dewatering if required for the work etc. complete |
| 3 | Filling foundation and plinth with sand wellwatered & rammed with cost, conveyance,royality,taxes etc. complete. |
| 4 | Cementconcrete(1:3:6)with4cmsizehardgranitemetalincludingcost,conveyance,royality,taxes,watering and curing etc. complete. |
| 5 | R.C.C. work of M-20 Grade with 20mm and down graded b.h.c.b.g. chips including hoisting and laying. |
| 6 | i)Column base |
| 7 | ii)Plinth Beam |
| 8 | iii) Lintel Band |
| 9 | iv)Chajja |
| 10 | v)Columnsuper Structure |
| 11 | vi)Slab |
| 12 | vii) Wall beam |
| 13 | viii)Stair case |
| 14 | Brick work with Fly Ash. bricks in F&P having crusing strength between 75kg/cm2 in cement motar (1:6) with cost, coveyance, royality watering & curing etc. complete. |
| 15 | Brick work with Fly Ash. bricks In Super-structurehaving crusing strength between 75kg/cm2 in cement motar (1:6) with cost, coveyance, royality watering & curing etc. complete. |
| 16 | Supplying ,fitting and placing uncoated HYSD bar reinforcement complete as per drawing and technical specification. |
| 17 | 16mm thick cement plaster (1:6) over brick work with cst of all materials and all labour etc. |
| 18 | 12mm thick cement plaster (1:6) over brick work with cst of all materials and all labour etc |
| 19 | 6mm thick cement plaster (1:4) to RCC surfaces finished smooth including closed deep chipping and slurry treatmentper 1 sqm |
| 20 | 2.5cm (1\") thick A.S. flooring (1:2:4) using 12mm c.b.h.g. chips |
| 21 | 12mm (1/2\") thick cement plaster (1:4) over brick work including cement punning and bitumen painting over top of wall. |
| 22 | Supplying, fitting & fixingof vetrified tiles ofsize 600mmx600mmx 10mm of in floors, treads or steps and landing on 25 mm thick bed of cement mortar 1:1 (1 cement: 1 sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubing and polishing with cost,coveyance of all materials etc. complete. |
| 23 | Fixing tiles indadoo,skirtingand rises of steps on12 mm thickcement plaster in mortar 1:3 (1 cement: 3 sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubing and polishing with cost,coveyance of all materials etc. complete |
| 24 | Supplying, fitting& fixingwithcost & convaynce of M.S. Grill Door, Window grills & collapsible Gateetc.Complete. |
| 25 | i)Door |
| 26 | ii)Window |
| 27 | iii)Ventilator/Grill |
| 28 | Labour charges for fitting and fixing in position of MS GrillDoor, Window grills & Collapsible gate etc complete |
| 29 | Painting 2coats over a coat of primer including cost of paints, labour& sundries etc complete |
| 30 | Providing , fitting & fixing of window (sliding type ) made up Alsection 151-154,151-155 as window frame section no 151-155,151-153 and 151-167 as shutter frame with 5 mm thick black glass as panel fitted with ruber bending including locking arrangement |
| 31 | Providing , fitting & fixing of Al door withOEL anodzed Al door section of 1902 as vertical member 9201 as top member and 9200 as bottom and middle member and 6 mm plain glass in top & bottom portion fixed on door frame by means of tapered clip No 4660 .Rubber beading fricyion stay and the frame to be completed by means of jointing angle no 1855 including all cost of labour T&P hire charges of drilling machine labour charge etc complete. |
| 32 | Supplying, fitting and fixing of stainless steel of 304 grade in hand railling using 50mm dia of 32mm x 32mm x 2mm @ 0.90mtr C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm 3 rows in staircase as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes of all materials, labour, T & P etc required for the work complete in all respect. |
| 33 | Priming one coat of wall primer including cost of paint.Data for 10 Sqm |
| 34 | Finishing wall surface of walls with Acrylic wall putty (Water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes, labour T&P etc complete. |
| 35 | Wall painting 2 coats with weather coat of approved shade on old work to give an even shade. Per 1 sqm. |
| 36 | Distempering two coats to walls with distemper of approved shade on new work to give an even shade enculding cost of distemper |
| 37 | Fixing Granitein floors treads or steps and landing on 25mm thick bed of cement mortar 1:1 (1 cement : 1 sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete including cost of precast tiles. |
| 38 | FIRST FLOOR |
| 39 | R.C.C. work of M-20 Grade with 20mm and down graded b.h.c.b.g. chips including hoisting and laying. |
| 40 | i) Lintel Band |
| 41 | ii)Chajja |
| 42 | iii)Columnsuper Structure |
| 43 | iv)Slab |
| 44 | v) Wall beam |
| 45 | vi)Stair case |
| 46 | Brick work with Fly Ash. bricks In Super-structurehaving crusing strength between 75kg/cm2 in cement motar (1:6) with cost, coveyance, royality watering & curing etc. complete. |
| 47 | Supplying ,fitting and placing uncoated HYSD bar reinforcement complete as per drawing and technical specification. |
| 48 | 16mm thick cement plaster (1:6) over brick work with cst of all materials and all labour etc. |
| 49 | 12mm thick cement plaster (1:6) over brick work with cst of all materials and all labour etc |
| 50 | 6mm thick cement plaster (1:4) to RCC surfaces finished smooth including closed deep chipping and slurry treatmentper 1 sqm |
| 51 | Supplying, fitting & fixingof vetrified tiles ofsize 600mmx600mmx 10mm of in floors, treads or steps and landing on 25 mm thick bed of cement mortar 1:1 (1 cement: 1 sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubing and polishing with cost,coveyance of all materials etc. complete. |
| 52 | Fixing tiles indadoo,skirtingand rises of steps on12 mm thickcement plaster in mortar 1:3 (1 cement: 3 sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubing and polishing with cost,coveyance of all materials etc. complete |
| 53 | Supplying, fitting& fixingwithcost & convaynce of M.S. Grill Door, Window grills & collapsible Gateetc.Complete. |
| 54 | i)Door |
| 55 | ii)Window |
| 56 | iii)Ventilator/Grill |
| 57 | Labour charges for fitting and fixing in position of MS GrillDoor, Window grills & Collapsible gate etc complete |
| 58 | Painting 2coats over a coat of primer including cost of paints, labour& sundries etc complete |
| 59 | Providing , fitting & fixing of window (sliding type ) made up Alsection 151-154,151-155 as window frame section no 151-155,151-153 and 151-167 as shutter frame with 5 mm thick black glass as panel fitted with ruber bending including locking arrangement including all fitting with all charges etccomplete. |
| 60 | Providing , fitting & fixing of Al door withOEL anodzed Al door section of 1902 as vertical member 9201 as top member and 9200 as bottom and middle member and 6 mm plain glass in top & bottom portion fixed on door frame by means of tapered clip No 4660 .Rubber beading fricyion stay and the frame to be completed by means of jointing angle no 1855 including all cost of labour T&P hire charges of drilling machine labour charge etc complete. |
| 61 | Supplying, fitting and fixing of stainless steel of 304 grade in hand railling using 50mm dia of 32mm x 32mm x 2mm @ 0.90mtr C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm 3 rows in staircase as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes of all materials, labour, T & P etc required for the work complete in all respect. (Data for 3.26 sqm.) |
| 62 | Priming one coat of wall primer including cost of paint.Data for 10 Sqm |
| 63 | Finishing wall surface of walls with Acrylic wall putty (Water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes, labour T&P etc complete. |
| 64 | Wall painting 2 coats with weather coat of approved shade on old work to give an even shade. Per 1 sqm. |
| 65 | Distempering two coats to walls with distemper of approved shade on new work to give an even shade enculding cost of distemper |
| 66 | Fixing Granitein floors treads or steps and landing on 25mm thick bed of cement mortar 1:1 (1 cement : 1 sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete including cost of precast tiles. Per 1sqm |
| 67 | 20mm (3/4\") thick cement plaster (1:4) grading plaster |
| 68 | SECONDFLOOR |
| 69 | R.C.C. work of M-20 Grade with 20mm and down graded b.h.c.b.g. chips including hoisting and laying. |
| 70 | i)Wall beam |
| 71 | ii)Column |
| 72 | iii)Slab |
| 73 | Brick work with Fly Ash. bricks In Super-structurehaving crusing strength between 75kg/cm2 in cement motar (1:6) with cost, coveyance, royality watering & curing etc. complete. |
| 74 | Supplying ,fitting and placing uncoated HYSD bar reinforcement complete as per drawing and technical specification. |
| 75 | 16mm thick cement plaster (1:6) over brick work with cst of all materials and all labour etc. |
| 76 | 12mm thick cement plaster (1:6) over brick work with cst of all materials and all labour etc |
| 77 | Supplying, fitting& fixingwithcost & convaynce of M.S. Grill Door, Window grills & collapsible Gateetc.Complete. |
| 78 | i)Door |
| 79 | Painting 2coats over a coat of primer including cost of paints, labour& sundries etc complete |
| 80 | Finishing wall surface of walls with Acrylic wall putty (Water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes, labour T&P etc complete. |
| 81 | Wall painting 2 coats with weather coat of approved shade on old work to give an even shade. |
| 82 | Distempering two coats to walls with distemper of approved shade on new work to give an even shade enculding cost of distemper |
| 83 | Cost of Display Board having size 4\"0\"X5\"0\" |
| 84 | EI WORKS |
| 85 | GROUND FLOOR |
| 86 | 1)Rescessed wiring to light point, Fan point , calling bellpoint with 1.50mmsq. FR PVC insulated single core multistrand copper conductor etc comp. |
| 87 | (A) Group-A |
| 88 | (B) Group-B |
| 89 | (C ) Group-C |
| 90 | 18) Recessed wiring to 5/6 amp plug point in 20mm dia non metalicflexible polyhtene conduit with 1.50 sq.mm FR PVC insulated single core multistrand copper conductor of ISI mark with 5AMP,250V piano type switch of ISI mark. |
| 91 | 2-(A) S/F of 5/6A switch & 3pin 5/6A socket on existing board. |
| 92 | 3)Wiring to circuit / Sub-main wiring along with earth wire with the following sizes of PVC S/C multistrand cupper wire in recessed. |
| 93 | (a) 2x1.50sqmm+1x1.5sqmm |
| 94 | (b) 2x2.50sqmm+1x1.5sqmm |
| 95 | (c) 2x4.0sqmm+1x1.5sqmm |
| 96 | (d)2x6.0sqmm+2x2.5sq.mm |
| 97 | 4) S/F of BK angle holder without bulb |
| 98 | 35)S/F of 9 W LEDlight withfittings |
| 99 | 6) Supplying of 12\" Exhaust fan heavy duty |
| 100 | 7) Fixing charges of exhaust fan |
| 101 | 8) S/F of 48\" Ceiling fan with out regulator |
| 102 | 9) S/F of electronic fan regulator step type |
| 103 | 11)S/F of Call bell with bell push |
| 104 | 12)S/F of 40wLED street light |
| 105 | 10) S/F of 3 pin 15amp plug with on MS Board. |
| 106 | 12) S/f of 20w LED Fl. Fittings |
| 107 | S/F of 4 way TPN Double Door DB Box with 32A 4P MCB -1Nos and 10A SP MCB-9 Nos |
| 108 | S/F of 32Amp DP main switch |
| 109 | S/F of standard earthing as per govt. specification |
| 110 | wiring to Invertor point with 1.5 mm2 pvc S/c multistand Copper wire |
| 111 | S/F of 4mm service wire with fittings |
| 112 | FIRST FLOOR |
| 113 | 1)Rescessed wiring to light point, Fan point , calling bellpoint with 1.50mmsq. FR PVC insulated single core multistrand copper conductor etc comp. |
| 114 | (A) Group-A |
| 115 | (B) Group-B |
| 116 | © Group-C |
| 117 | 18) Recessed wiring to 5/6 amp plug point in 20mm dia non metalicflexible polyhtene conduit with 1.50 sq.mm FR PVC insulated single core multistrand copper conductor of ISI mark with 5AMP,250V piano type switch of ISI mark. |
| 118 | 2-(A) S/F of 5/6A switch & 3pin 5/6A socket on existing board. |
| 119 | 3)Wiring to circuit / Sub-main wiring along with earth wire with the following sizes of PVC S/C multistrand cupper wire in recessed. |
| 120 | (a) 2x1.50sqmm+1x1.5sqmm |
| 121 | (b) 2x2.50sqmm+1x1.5sqmm |
| 122 | (c) 2x4.0sqmm+1x1.5sqmm |
| 123 | (d)2x6.0sqmm+2x2.5sq.mm |
| 124 | 4) S/F of BK angle holder without bulb |
| 125 | 35)S/F of 9 W LEDlight withfittings |
| 126 | 6) Supplying of 12\" Exhaust fan heavy duty |
| 127 | 7) Fixing charges of exhaust fan |
| 128 | 8) S/F of 48\" Ceiling fan with out regulator |
| 129 | 9) S/F of electronic fan regulator step type |
| 130 | 11)S/F of Call bell with bell push |
| 131 | 12)S/F of 40wLED street light |
| 132 | 10) S/F of 3 pin 15amp plug with on MS Board. |
| 133 | 12) S/f of 20w LED Fl. Fittings |
| 134 | 13) S/F of 4 way TPN Double Door DB Box with 32A 4P MCB -1Nos and 12 Way SP MCB-10 Nos |
| 135 | 13) S/F of 32Amp DP main switch |
| 136 | 30) S/F of standard earthing as per govt. specification |
| 137 | wiring to Invertor point with 1.5 mm2 pvc S/c multistand Copper wire |
| 138 | 15)S/F of 4mm service wire with fittings |
| 139 | PHWORKS |
| 140 | Supplying all labour, T&P and dismantling and removing cement concrete including stacking the useful materials for reuse andremoving the debris within 50m lead including contractor profit & labour cess etc all complete as per the direction of Engineer-in-charge. |
| 141 | Supplying all labour, T&P and earth work in excavation in all kinds of soil within initial lead of 50m lead & initial lift of 1.50m. including rough dressing breaking clods & laying in layers not exceeding 0.30m. In depth, leveling the bed, using pans, vessels for slushy soil & including sundries supervision charges & labour cess etc, as per the direction of Engineer-in-charge. |
| 142 | Providing and laying in trenches unplasticised PVC pipes conforming to IS: 4985/2000 of Class IV/HDPE(PE-63) (10 kgf/cm²) of the following nominal bore and pipe fittings including testing as per specificationcomplete. (Earth work in trenches to be measured and paid for separately). (Earth work in trenches to be measured and paid for separately) |
| 143 | Supplying all labour, T&P and Filling in pipe line trenches with excavated materials including watering and ramming, contractor profit & labour cess as directed by the Engineer-in-charge |
| 144 | Providing and fixing to wall or ceiling and floor pvc pipes class conforming to ASTM-D-1785/ 89 (Sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor including cost of all materials,conveyance to worksite,contractor profit & labour cess etc all completeand direction of Engineer-in-charge. (including cost of PVC pipe+fittings) |
| 145 | 25mm dia ASTM-D-1785/ 89 (Sch-80)pipe |
| 146 | Ground Floor |
| 147 | First Floor |
| 148 | Supplying & fixing Rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS : 12701--1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting upto a height of 5 metres above ground level and placing the tank to the required position etc all complete as per specification and direction of the Engineer in charge.(including cost of PVC tank+Tank jointer+ Ball cock set) |
| 149 | 1000 litre capacity three Layer Cylinderical Vertical water storage tanks (White Coloured)+G.I. tank Jointers+Ball cock set.(First Floor) |
| 150 | Supplying all materials, labour, T&P for Cutting grooves in Pucca floors and walls for taking PVC /SWR pipesand making good the damages as per specification including cost of materials, ,royalty, conveyance, contractor profit & labour cess etc all complete as perdirection of Engineer-in-charge. |
| 151 | Supplying all materials, labour, T&P for cutting hole in R.C.C floors and roofs upto 19 cm thick for passing G.I / P.V.C pipes and fittings etc and repairing the holes after insertion of pipes etc with cement concrete (1:2:4) including finishing complete so as to make it leak proof |
| 152 | Supplying all materials, labour, T&P for cutting holes through existing brick work including making good the same in cement mortar (1:4) for taking GI/PVC pipes and fittings etc all complete as per specification. |
| 153 | 250mm thick wall(for GF&FF) |
| 154 | Supplying all materials, labour, T&P for cutting holes through the brick or laterite masonry wall for taking Sand Cast Iron (SCI) /centrifugally cast (spun) iron pipes/PVCand mending good the damages. |
| 155 | 250mm to 375mm thick wall |
| 156 | Supplying all materials, labour,T&P and Laying of U-PVC pipe class-II ,bed concrete (1:4:8) using 40mm size crusher broken metal, encasing PVC pipe with PCC (1:2:4) using 12mm size Crusher Broken chip, earth work in excavation , refilling and removal of surplus earth to a safe distance. Including cost of all materials, conveyance of all materials to worksite, payment of royalty & labour cess etc.all complete as per the specification and direction of the Engineer-in-Charge. |
| 157 | 110mm O.D. |
| 158 | Providing and fixing on wall face unplasticised Rigid PVC soil, waste and rain water pipes conforming to IS : 13592 Type B, including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes |
| 159 | 110mm OD P.V.C. SWR S/S Pipe(ISI type-B) |
| 160 | Providing and fixing on wall face unplasticised-PVC moulded fittings / accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion |
| 161 | 110mm dia PVC SWR coupler |
| 162 | 110 mm dia P.V.C. SWR plain bend 87.5\" |
| 163 | 110 mm dia P.V.C. SWR Door bend 87.5\" |
| 164 | 110 x 110 x 110mm dia PVC SWR Tee |
| 165 | 110mm dia P.V.C. SWR S/J with door |
| 166 | 110mm dia P.V.C. Nahani Trap with out Jally |
| 167 | 110 mm dia P.V.C. SWR Vent Cowl |
| 168 | 110mm diaP.V.C. SWR.pipe clip |
| 169 | Supplying all materials, labour, T&P andfitting,fixingof following Sanitary & P.H. Fixtures as per specification including cost of all materials, conveyance,contractor profit & labour cess etc all completeas per the direction of Engineer-in-charge. |
| 170 | Porcelain 23\" I.W.C.(Orissa Pan)+\"P\"Trap 125mm x 110mm (Long) |
| 171 | Porcelain E.W.C. with P-trap |
| 172 | 10 litr pvc low level cistern with fittings |
| 173 | Porcelain 22\"x 16\"(550x400) W.H.B+C.I. Basin Bracket in pair |
| 174 | 24\"x 18\" x 10\"STEEL sink single bowl(Mousumi )+C.I. Basin Bracket in pair |
| 175 | 15mm dia C.P.angular stopcock+C.P. flange(Big) +C.P. extension piece-3\" |
| 176 | 15mm dia C.P. short bodycock+C.P. flange(Big) +C.P. extension piece-3\" |
| 177 | 115mm dia C.P. Long body bib cockwith flange+C.P. extension piece-3\" |
| 178 | CP Shower (Over Head)+CP Arm for Over head Shower |
| 179 | 15mm dia C.P concealed stop cock+C.P. extension piece-3\" |
| 180 | Hand Shower Health Faucet)ABS Body with 1.00 meter long Easy Flex Tube in Chrmoe finish & wall hook |
| 181 | C.P. waste. (32mm - Small) |
| 182 | C.P. Sink waste. (80/32) |
| 183 | Pillar Cock Long Neck with Aerator |
| 184 | Mirror(Best Quality) |
| 185 | 15mmx600mm PVC connection pipe |
| 186 | 32mmx 1150mm long PVC waste pipe |
| 187 | White Plastic Seat & Cover with CP brass hinges and rubber buffers |
| 188 | Soap dish /Oval |
| 189 | C.P. Towel Ring |
| 190 | Jaquar Single Towel Rail 600mm |
| 191 | 15mm dia PVC Bib cock |
| 192 | 25mm dia UPVC Ball Valve long Handle(Water Tec)(Water Tec/Prayag /Reputed Make) |
| 193 | Supplying ,fitting,fixing of 1.00 HP self priming (Kirloskar make) motor with required fittings including cost of materials, conveyance,labour cess etc all complete. |
AI Tender Summary
Tender Timeline
May 03, 2023
11:30 IST
Tender Published
Tender notice published.
Completed
May 08, 2023
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
May 08, 2023
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
CompletedMay 08, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedApr 28, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender