Tender For Road Illumination Work Such As Providing Street Light Electrification From Chandrabhaga To Kakatpur Junction And Konark Ring Road For The Year 2023-24
Tender Value
4.33 Crore
Estimated cost
Bid Submission
24 Apr 2023
0 days left
EMD
4.33 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
konark → Odisha
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Road Illumination Work Such As Providing Street Light Electrification From Chandrabhaga To Kakatpur Junction And Konark Ring Road For The Year 2023-24
BOQ
| Sl. No. | Item Description |
| 1 | Supply of 9 Mtr Long Hot Dip Galvanized PU painted Street Light Octagonal Pole with Foundation Type Base Plate & Foundation Bolts (Dimensions for pole as TopDiameter 90 mm, Bottom Diameter 190 mm, Section Length- 9000 mm, Thickness-3 mm, Foundation Type Base Plate (300X300X20mm), Foundation Bolts (M24 X 850 MM 4Nos). Poles shall be designed to withstand the maximum windspeed as per IS 875. Bottom Dia The top loading i.e. area and the weight of fixtures are to be considered to calculate maximum deflection of the pole and the same shall meet the requirement of BS: 5649 Part VI 1982. The pole shaft shall have octagonal cross section and shall be continuously tapered with single longitudinal welding. There shall not be any circumferential welding. The welding of pole shaft shall be done by Submerged Arc Welding (SAW) process. All octagonal pole shafts shall be provided with the rigid flange plate of suitable thickness with provision for fixing 4 foundation bolts. This baseplate shall be fillet welded to the pole shaft at two locations i.e. from inside and outside. The octagonal Poles shall have door of approximate 500 mm length at theelevation of 500 mm from the Base plate. The door shall be vandal resistance and shall be weather proof to ensure safety of inside connections. The door shall be flush with the exterior surface and shall have suitable locking arrangement. There shall also be suitable arrangement for the purpose ofearthing.Octagonal Poles HT Steel Conforming to grade S355JO. Base Plate Fe 410 conforming to IS 226 / IS 2062 Foundation Bolts EN.8 grade The poles shall be hot dip galvanized as per IS 2629 / IS 2633 / IS 4759 standards with average coating thickness of 70 micron. The galvanizing Shall be done in single dipping. Including Backalite sheet, MCB Connector.. MAKE-Crompton Greaves /Transrail /utkarsh/RR ispat /any equivalent. |
| 2 | Supply of Double Arm brackets shall be made of specified size G.I PU painted heavy duty pipe with minimum 1500 mm long each side and minimum 48 mm dia with necessary holding brackets, hold fasts etc suitable for LED light mounting. Crompton Greaves /Transrail /utkarsh/RR ispat /any equivalent. by direction of EIC. |
| 3 | Supply of single Arm brackets shall be made of specified size G.I heavy duty PU painted pipe with minimum 1500 mm long each side and minimum 48 mm dia with necessary holding brackets, hold fasts etc suitable for LED light mounting. Crompton Greaves /Transrail /utkarsh/RR ispat /any equivalent. by direction of EIC. |
| 4 | Supply and fixing of LED Street light luminaire of 150 W, housing made from high pressure die cast aluminum, Integrated lens cover with IP-66 degree of protection. System efficacy of >110 Lumen/Watt CRI =70 and co-related color temperature (CCT) of 5700K (ANSI). , UV stabilized PC IP lens diffuser.The luminaire should have minimum 4KV surge protection integrated with driver, PF=0.95, and total harmonic distortion of THD=10%, operating voltage range of 120V-270V should be provided. The Driver used must be a constant current potted driver with efficiency of =85% & electrical ClassLM79, LM80for > =9000 Hrs, Luminaire like at 50K Burning Hours. High power LED ,External SPD-10KV.Make: HAVELLS /WIPRO/PHILLIPS/CROMPTON/PANASONIC /EQUIVALENTby direction of EIC. |
| 5 | Supply of feeder pillar made out from 20 Gauge thickC.R.Sheet duly painted /power coated having 63 amp TPN MCB as incomer, 1 no. 40 amp contactor,timer, indication lamps and bus bar arrangement system. Crompton Greaves /Transrail /utkarsh/RR ispat /any equivalentby direction of EIC. |
| 6 | Supply and fixing of 5Amp to 32A rating 240V \"C\" series MCB suitable for lighting and other loads of the following poles in the exiting MCB DB ISI marked complete with connections testing and commissioning etc. (make-Havells//L&T/C&S/Legrand/ any equivalentby direction of EIC. |
| 7 | Supply of 3 core 1.50 mm2 round flexible copper cablefrom junction box to light fitting .polycab/ RR cable //Finolex/Havells/equivalent / by direction of EIC. |
| 8 | Supply of 1.1 KV, AYFY4 x 16sqmmAluminium Armoured Cable through HDPE pipe.polycab/ RR cable //Finolex/Havells/equivalent / by direction of EIC. |
| 9 | Supply of polycab make1.1 KV, AYFY4 x 50sqmmAluminium Armoured Cablethrough HDPE pipe. RR cable //Finolex/Havells/equivalent / by direction of EIC. |
| 10 | supply of GI pipe 100mm dia (required for road crossing of main cable) |
| 11 | Construction ofR.C.C Foundation for errection of 9 Meter Street light Pole with M-20 Grade concrete. Details analysis (as per PWD schedule rate)attached |
| 12 | erection, Testing and commisioningof 9mtr street lighting pole along with all materials & labour.(Scope is inclusive of breaking of concrete) |
| 13 | Erection of feeder pillar with stand mounting arrangement from ground along with complete of fencing by direction of EIC. |
| 14 | Laying of one number of PVC insulated and PVC sheathed / XLPE power cable of 1.1KV grade of size not exceeding 25 sq.mm direct in ground including excavation, sand cushing, protective covering and refilling the trench etc. as required.& direction of EIC. |
| 15 | Laying of one number of PVC insulated and PVC sheathed / XLPE power cable of 1.1KV grade of size exceeding 25 sq.mm but not exceeding 120 sq.mm direct in ground including excavation, sand cushing, protective covering and refilling the trench etc. as required. & direction of EIC. |
| 16 | Provision of earthing with40mm dia G.I.pipe of 3 mtr long complete with all accessoriesand 25x 3 mm GI strip for inter connection as per IS 3043 |
| 17 | Supply of 7 Mtr Long Hot Dip Galvanized PU painted Street LightOctagonal Pole with Foundation Type Base Plate & Foundation Bolts (Dimensions for pole as Top Diameter 70 mm, Bottom Diameter 155 mm, Section Length- 7000 mm,Thickness-3 mm, Foundation Type Base Plate (260X260X16mm), Foundation Bolts (M24 X 750 MM 4Nos). Poles shall be designed to withstand the maximum windspeed as per IS 875. Bottom Dia The top loading i.e. area and the weight of fixtures are to be considered to calculate maximum deflection of the pole and the same shall meet the requirement of BS: 5649 Part VI 1982. The pole shaft shall have octagonal cross section and shall be continuous lytapered with single longitudinal welding. There shall not be any circumferential welding. The welding of pole shaft shall be done by Submerged Arc Welding (SAW) process.All octagonal pole shafts shall be provided with the rigid flange plate of suitable thickness with provision for fixing 4 foundation bolts. This baseplate shall be fillet welded to the pole shaft at two locations i.e. from inside and outside. The octagonal Poles shall have door of approximate 500 mm length at the elevation of 500 mm from the Base plate. The door shall be vandal resistance and shall be weather proof to ensure safety of inside connections. The door shall be flush with the exterior surface and shall have suitable lockingarrangement. Octagonal Poles HT Steel Conforming to grade S355JO. Base Plate Fe 410 conforming to IS 226 / IS 2062 Foundation Bolts EN.8 grade The poles shall be hot dip galvanized as per IS 2629 / IS 2633/ IS 4759 standardswith average coating thickness of 70 micron. The galvanizing Shall be done in single dipping. MAKE-Crompton Greaves /Transrail /utkarsh/RR ispat /any equivalent. |
| 18 | Supply of Single Arm brackets shall be made of specified size G.I PU painted heavy duty pipe with minimum 1500/1000 mm long each side and minimum 48 mm dia with necessary holding brackets, hold fasts etc suitable for LED light mounting. Crompton Greaves /Transrail /utkarsh/RR ispat /any equivalent. by direction of EIC. |
| 19 | Supply of LED Street light luminaire of 45 W, housing made from high pressure die cast aluminum, Integrated lens cover with IP-66 degree of protection. System efficacy of >110 Lumen/Watt CRI =70 and co-related color temperature (CCT) of 5700K (ANSI). , UV stabilized PC IP lens diffuser.The luminaire should have minimum 4KV surge protection integrated with driver, PF=0.95, and total harmonic distortion of THD=10%, operating voltage range of 120V-270V should be provided. The Driver used must be a constant current potted driver with efficiency of =85% & electrical ClassLM79, LM80for > =9000 Hrs, Luminaire like at 50K Burning Hours. High power LED ,External SPD-10KV.Make: HAVELLS /WIPRO/PHILLIPS/CROMPTON/PANASONIC /EQUIVALENTby direction of EIC. |
| 20 | Supply and fixing of LED Street light luminaire of 90 W, housing made from high pressure die cast aluminum, Integrated lens cover with IP-66 degree of protection. System efficacy of >110 Lumen/Watt CRI =70 and co-related color temperature (CCT) of 5700K (ANSI). , UV stabilized PC IP lens diffuser.The luminaire should have minimum 4KV surge protection integrated with driver, PF=0.95, and total harmonic distortion of THD=10%, operating voltage range of 120V-270V should be provided. The Driver used must be a constant current potted driver with efficiency of =85% & electrical ClassLM79, LM80for > =9000 Hrs, Luminaire like at 50K Burning Hours. High power LED ,External SPD-10KV.Make: HAVELLS /WIPRO/PHILLIPS/CROMPTON/PANASONIC /EQUIVALENTby direction of EIC. |
| 21 | Supply of feeder pillar made out from 20 Gauge thickC.R.Sheet duly painted /power coated having 63 amp TPN MCB as incomer, 1 no. 40 amp contactor,timer, indication lamps and bus bar arrangement system. Crompton Greaves /Transrail /utkarsh/RR ispat /any equivalentby direction of EIC. |
| 22 | Supply and fixing of 5Amp to 32A rating 240V \"C\" series MCB suitable for lighting and other loads of the following poles in the exiting MCB DB ISI marked complete with connections testing and commissioning etc. (make-Havells//L&T/C&S/Legrand/ any equivalentby direction of EIC. |
| 23 | Supply of 3 core 1.50 mm2 round flexible copper cablefrom junction box to light fitting .polycab/ RR cable //Finolex/Havells/equivalent / by direction of EIC. |
| 24 | Supply of 1.1 KV, AYFY4 x 16sqmmAluminium Armoured Cable through HDPE pipe.polycab/ RR cable //Finolex/Havells/equivalent / by direction of EIC. |
| 25 | Supply of polycab make1.1 KV, AYFY4 x 50sqmmAluminium Armoured Cablethrough HDPE pipe. RR cable //Finolex/Havells/equivalent / by direction of EIC. |
| 26 | supply of GI pipe 100mm dia (required for road crossing of main cable) |
| 27 | Construction ofR.C.C Foundation for errection of 7 Meter Street light Pole with M-20 Grade concrete. Details analysis (as per PWD schedule rate)attached |
| 28 | erection, Testing and commisioningof 7mtr street lighting pole along with all materials & labour.(Scope is inclusive of breaking of concrete) |
| 29 | Erection of feeder pillar with stand mounting arrangement from ground along with complete of fencing by direction of EIC. |
| 30 | Laying of one number of PVC insulated and PVC sheathed / XLPE power cable of 1.1KV grade of size not exceeding 25 sq.mm direct in ground including excavation, sand cushing, protective covering and refilling the trench etc. as required.& direction of EIC. |
| 31 | Laying of one number of PVC insulated and PVC sheathed / XLPE power cable of 1.1KV grade of size exceeding 25 sq.mm but not exceeding 120 sq.mm direct in ground including excavation, sand cushing, protective covering and refilling the trench etc. as required. & direction of EIC. |
| 32 | Provision of earthing with40mm dia G.I.pipe of 3 mtr long complete with all accessoriesand 25x 3 mm GI strip for inter connection as per IS 3043 |
| 33 | Supply of 12.5 Mtr High Mast having ,Material of construction of shaft,Grade S355 JO as per BSEN 100025 or equivalent, Cross section of mast 12 sided, regular continuously tapered polygonal, Thickness of shaft Bottom 4 mm & Top 3 MM, Length of individual section (mm) 6.50 Mtrs Base Dia.360 mm(Approx),Top Dia.150 mm(Approx),Thickness of Galvanisation,Average 70 Microns, Size of Door Opening at Base of Mast,900 mmX 250 mm ,Size of Base Plate ,Diameter. 520 mm, Thickness 25mm. Maximum Wind Speed ( IS 875 -1987 ) 180 Km/Hr Number of Foundation Bolts. : 06 Nos,PCD of Foundation Bolts. : 440 mm,Diameter of Foundation Bolts. : M24,Length of Foundation Bolts : 850 mm,Material of Construction. : 40 NB ERW Class B- M.S Pipe,Diameter of Lantern Carriage Ring. : 600 mm (ID),Construction. : 6 Arm Welded,Number of Joints. : 2 Segments Load Carrying Capacity. : 6-12 Luminaire, Symmetrical 200w LED, Winch: Number of Drums Per Winch. : Double Drum ,Gear Ratio. : 50 : 1,Capacity : SWL 500 Kgs. Method of Operation. : Motor OR Manual.Lubrication Arrangement. : Self Lubricating in Permanent Oil Bath Type of Lubricant. : SAE - 90 / 140. 7 / 19 Construction Stainless Steel Wire Rope: 6mm, Breaking Load Capacity ,2350 Kgs Per SS Wire Rope,EPR Insulated PCP Sheathed/ PVC,Flexible Copper 5 Core 2.5 Sq mm, Power Tool:1.5 HP, Integral 415 Volts Input Supply. Including all Accosories , trasportation etc Make: Crompton Greaves /Transrail /utkarsh/RR ispat /any equivalent. by direction of EIC. |
| 34 | Supply of 3 PH, 415 Volts.± 12.5% Rating of the Motor suitable to the design with control & torque limiting protection Single speed or Variable speed. Photoelectric light sensitive and astronomical ON OFF timers to switch for automatic controlling the lights at predetermined time and as per ambient lighting level and other accessories with protection and suitable arrangement to raise or lower the lantern carriage. Made of minimum 14SWG CRCA sheet metal ,This box shall have space to 4Cx25 Sq mm Al Armord Cable receive incoming and outgoing cable termination.Make:-Crompton Greaves /Transrail /utkarsh/RR ispat /any equivalent. by direction of EIC. |
| 35 | Supply and fixing of LED flood light luminaire of 200 W, housing made from high pressure die cast aluminum, Toughened glass cover with IP-66 degree of protection. Beam Angle-60 degree. System efficacy of >110 Lumen/Watt CRI =70 and co-related color temperature (CCT) of 5700K (ANSI). The luminaire should have 4KV surge protection integrated in driver and 10KV SPD external to driver for enhanced safety, PF=0.95, and total harmonic distortion of THD=10%, operating voltage range of 120V-270V should be provided. The Driver used must be a constant current potted driver with efficiency of =85% & electrical Class 1.LM79From NABL Approved Lab, LM80for > =9000Hrs, Luminaire like at 50K Burning Hours.LED type-High power LEDMake: HAVELLS /WIPRO/PHILLIPS/CROMPTON/PANASONIC /EQUIVALENTby direction of EIC. |
| 36 | Provision of earthing with40mm dia G.I.pipe of 3 mtr long complete with all accessoriesand 25x 3 mm GI strip for inter connection as per IS 3043 |
| 37 | Construction ofR.C.C Foundation for errection of 12.5 high mast with M-20 Grade concrete. Details analysis (as per PWD schedule rate)attached |
| 38 | Erection, Testing, Commissioning of 12.5 Meter High Mast with suitable equipment & tools. |
| 39 | Erection, Testing, Commissioning of High Mast feeder Piller with suitable equipment & tools, including Supply of Gland ,Lux etc. Including Concreting |
AI Tender Summary
Tender Timeline
Apr 10, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedApr 24, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedApr 25, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender