Tender For Special Repair To The Ladies Toilet Atw.No: 14 Thaluvampalayamin Kodumudi Town Panchayat
Tender Value
5 Lakhs
Estimated cost
Bid Submission
11 Apr 2023
0 days left
EMD
5000
Bank guarantee accepted
Document Fee
1770
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
kodumudi → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To The Ladies Toilet Atw.No: 14 Thaluvampalayamin Kodumudi Town Panchayat
BOQ
| Sl. No. | Item Description |
| 1 | Chipping of concrete and roughening the surface Charges inculding all labour Charges etc, Complete. |
| 2 | Plastering with cement mortar 1:3 mix, to 10mm thick including all cost of materials and labour charges etc., complete complying with standard specification. |
| 3 | Dismantling ofFloor finish and dadooing walls in cement mortar with Mosaic Tiles / Glazed Tiles / Clay Tiles / Cuddapah Slabs including cost andConveyance of all materials to site and all labour charges for filling etc., Complete. |
| 4 | Dadooing of walls with colour glazed tiles of size 300x200x6 mm finished thickness with c.m 1:2- and polished with same colorcement including all cost and convene of all materials etc.,complete |
| 5 | Paving the floor with Scratch proof ceramic tiles of any colour and size laid in CM 1:2 mix including all charges etc., complete complying with standard specification. |
| 6 | Providing UPVC (Un-Plasticized Polyvinyl Chloride) Door: Providing and fixing casement doors fabricated from un-plasticized polyvinyl chloride (uPVC) sections. Profiles: The profiles should be three chamber system which provides high insulation properties with outer frame 60mm x 55mm with an outer wall thickness of 2.4mm. The window unit should be designed with all corner joints mitred and fusion welded. Windows should be steel reinforced with 25 x 24 x 25mm steel reinforcement with a thickness of 1mm to have dimensional stability. The sash should be of 60 x 102mm. The mullion should be of 60 x 74mm. The profiles should have co-extruded seals. Hardware: All the hardware like friction stays, handles should be screwed with self tapping screws. The handles, locks should be designed so that they cannot be released from outside. Glazing: The window system should be glazed with 5mm plain float glass / 6mm bison lamInstallation: The profiles should be cut to length and welded 45 degrees. The window should be designed such that the water drainage does not pass through the reinforcement chamber. The window system should be fixed directly to the plastered brick wall using self expanding nylon plug and driving ms electroplated screws int |
| 7 | Painting with exterior emulsion painttwo coats with best approved brand and colour.The brand and colour should be got approved from the Exe.Engineer before use on works. |
| 8 | Painting with enamel paint over old iron work for Grill with two coats approved by I.S.I. paint to first quality as per the instructions of departmental officers over the existing priming coats in all floors.The make and colour of paint to be got approved by the departmental officers. |
| 9 | Supply and run of 2 of 4 sq.mm. (56 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour(sd 57) |
| 10 | Supply and fixing of 7W /9WLED Fitting with LED BULBSISI Make with Standard specification .(pg.no:13) |
| 11 | Supply and fixing of 18W 4 Feet LED Fitting with LED TUBEISI Make with Standard specification .(ANNEXURE-VII Sl.No.15 a) |
| 12 | Supply and fixing of 25W LED OUTDOOR FITTINGS (LIGHT EMITTING DIODE) 25W LED Street Light Fitting with LED etc., complete.ISI Make with Standard specification .(ANNEXURE-VII Sl.No.18 a) |
| 13 | Supplying and fixing in position best Indian make white glazed earthenware WASH HAND BASIN of 560x406mm with a a pair of C.I. Brackets, 15mm dia C.P. Pillar tap, 32mm G.I. Waster water pipe, 32mm dia C.P. Brass waster coupling, plug with chain, 15mm dia PVC connection, 15mm G.M. wheel valve with ISI mark and necessary G.I. union and G.I. Elbow, including fixing wash hand basin in position with white lead, clamps, teakwood plugs, screws, rubber washer etc., complete without any leakage complying with standard specifications. |
| 14 | Supply and fixing in position 22\" Indian type water closet with foot reset includes \"P\" (or) \"S\" trap including cost and conveyance of all materials to site and all labour charges etc., to complete as per std.,specifications. |
| 15 | Supply and Fixing PVC screw down tap Heavy type 20mm dia with Standard specification .( Sl.No.160 ,Pg.No:178) |
AI Tender Summary
Tender Timeline
Apr 10, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedApr 11, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedApr 11, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender