Military Engineer Services-MES has published Tender For Repair/Maintenance Of Summer Appliances At Dholewal, Cg Complex, Doraha And Phillaur Under Ge Ludhiana. Submission Date for this Tender is 05-05-2023. Air Conditioner Tenders in Ludhiana Punjab. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 15-Apr-2023 | Revised BOQ | BOQ | 28-04-2023 |
| 2 | 28-Apr-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 05-05-2023 |
| Sl. No. | Item Description |
| 1 | Sch "A" (Section-I ) |
| 2 | Taking down ceiling fan for repair of any make/ modelof sweep 1200/1400 mm by removing burnt / heated copper winding from stater and rewinding the stater coils with super enamelled copper wire of suitable size including providing insulation material, varnishing and provision of cotton tape, re-assembling and testing including replacement of spring washer and two core flexiblewire of size 23/.0076 with copper conductor of suitable length( appx 1.50 m length) from fan terminal to ceiling rose & refiixing the same after repair complete all as specified. |
| 3 | All as per item No. 01 above but exhaust fan of sweep 300/380mm/400mm/450mm sweep. |
| 4 | M&L for taking down ceiling fan of any make and model having sweep 1200mm/ 1400mm fixed in buildings at various locations in units, opening fan rotor, cleaning with kerosine oil, greasing and re-fixing in existing location including replacement of split pins, capacitor,ball bearing, gun metal bush, rubber real& refixing the sameafter repair,complete all as specified. |
| 5 | All as per item No. 1 above but exhaust fan of sweep 300/380mm/400mm/450mm sweep. |
| 6 | Supply and replacement of fan capacitor2.5 mfd all as specified and directed. |
| 7 | Supply and replacement of fan capacitor3.15 mfd all as specified and directed. |
| 8 | Supply and replacement of capacitor 4.0 mfd all as specified and directed. |
| 9 | Supply and replacement of set of blades for ceiling fan 1200/1400mm sweep duly screwed with spring washers of make as per existing one complete all as specified. |
| 10 | Supply only light grade down rod for ceiling fan size 60 cm length with connected nut bolt washer ,all as specifed and directed. |
| 11 | Supply and fixing inReplace with new louvershutter iron body for exhaust fan any size any typeall as specified . |
| 12 | S&Fin replacementof electronic fan regulator 230 volts suitable for ceiling fan of size 1200mm/1400mmsweep complete all as specified and directed. |
| 13 | Supply in replacement of metal fan blade forExhaust Fan sweep size 250-450 mm duly screwed with spring washers of make as per existing one complete all as specified and directed. |
| 14 | AIR CONDITIONER Taking down carefully window / Split AC unit of any size, any type,capacity1.5/2.0 Ton from the fitting/mountings, disconnecting power cables, drain pipes & accessories etc and cleaningby removing dust with suitable method, cleaning of air filters, tightening of loose wire, nuts, bolts, washers, servicing of condenser motor/blower, by oiling, greasing, required welding/bracing, replacement of worn out rubber bushes of condensor motor, setting of grill alignment & knobs, Checking for any leakages, provision of tharmocol,Brass nut, flair nuts, backelite connector andrefixing the AC unit and connecting up complete after carrying out necessary repairs / servicing to the entire satisfaction of the engineer in charge including transportation, all as specified and directedNote :spare parts/servicing charges will be measured and paid under relevent item of schedule. |
| 15 | M&L for recharging R-22/R-32/R-410 gas in air conditioner split/windowof capacity 1.5 Ton/ 2 Tonincluding testing for leakage and for satisfactory performance complete all as specified. |
| 16 | M&L for replacement of compressor sealed unit suitable for Air conditioner window type as per existing make or modelof capacity 1.5 TR in outdoor unit including taking out to old unserviceable compressor and cleaning flushing, vaccumizing the system, recharging of gas in adequate quantity, soldering/ brazing of suction. discharge and charging line complete all as specified. |
| 17 | All as per item No. 15 here-in-before but capacity of air conditioner 1.5 Ton Split type. |
| 18 | All as per item No. 15 here-in-before but capacity of air conditioner 2.0 Ton Split type. |
| 19 | Supply and fix in replacement blower motor Single Shaft, suitable for Split type AC 1.5/2 Ton single ended or double ended shaft as per existing make or model all as specified |
| 20 | Supply and fix in replacement blower motor double Shaft with blades, suitable for window type AC 1.5/2 Ton single ended or double ended shaft as per existing make or model all as specified. |
| 21 | Supply and fix in replacement Out door fan motor with AL blades suitable forSplit type AC 1.5/2 Ton out door unit single ended or double ended shaft as per existing make or model all asspecified. |
| 22 | M& L for Shifting of Window / Splittype A/C, any type / any capacity, any make with necessary modification to window / wall complete all upto entire satisfaction and as specified and directed. |
| 23 | Dismantlingand repalcement ofEvoporator coilof 1.5/2 Ton capacity window type/split type AC made up of copper tubing and aluminium cooling fins including brazing, welding etc , replacement of copper/aluminum tubing/fins as per existing with new one as per site requirement, refixing in original position and testing etc complete all as specified. |
| 24 | Dismantlingand repalcement ofcondensorcoilof 1.5/2 Ton capacity window type/split type AC made up of copper tubing and aluminium cooling fins including brazing, welding etc , replacement of copper/aluminum tubing/fins as per existing with new one as per site requirement, refixing in original position and testing etc complete all as specified. |
| 25 | Supply and replacement of starting capacitor suitable for 1.5 Ton/ 2.0 Ton capacity air conditioner all as specifiedand directed. |
| 26 | Supply and replacement of running capacitor suitable for 1.5 Ton/ 2.0 Ton capacity air conditioner all as specifiedand directed. |
| 27 | S&F in replacement over load protector suitable for 1.5 /2 Ton A/C |
| 28 | S&F in replacement starting relay box type suitable for 1.5/2 Ton capacity AC |
| 29 | S&F in replacement of thermostat suitable forWindow /Split 1.5 / 2 Ton capacity AC. |
| 30 | Supply and fix in replacement of Electronic Power Controle Box ( LED Display) for window type AC 1.5 TR complete all as specified. |
| 31 | Supply and fix in replacement of Electronic Power Controle Box (LED Display ) with Remot for Split Type type AC 1.5/2 TR complete all as specified. |
| 32 | Material and labour for replacement of copper discharge tube of size 1/2", 1/4",3/8", 5/8" withduly nylon insulated complete all as specified. |
| 33 | S&Fin replcement ofsub main wiring2 x4.0 Sqmm+ 1 X 4.00 sqmm as earth continuitywirePVC insulated unsheathed 1100 volts grade single core stranded ( multistrand ) copper conductor cable (FRLS)cable in surface/recessed as required in PVC casing caping/PVC conduit includingits all necessary fittings and accessories, one continuous run of PVC insulated unsheathed 4.0 sqmm stranded copper conductor cable asearth wire andconnectedto earth dolly, complete all as specified and directed by Engr in charge. Note- Two run of wire 4.00 Sqmm and one run of wire 4.00 sqmm drawn in casing-caping/PVC rigidconduitwill be measured as one length for the purpose of payment. |
| 34 | S&F forvoltage stabilizer 5 KVA Copper Wound suitable for Window/split type AC 2 TR including installation as in replacement complete all as specifie |
| 35 | S&Ffor voltage stabilizer 4 KVA Copper Wound suitable for Window/split type AC 1.5 TR including installation as in replacement complete all as specifie |
| 36 | M&L for drain PVC pipe, 15/20 mm bore as per site requirement3.5 M in length with two Nos mild steel clamps necessary brass screws as in replacement and complete specified and directed . |
| 37 | DEEP FREEZER / REFRIGERATORS M&L fortaking down deep freezer of capacity 300/410litre from any position for repairs, removing unserviceable compressor and supply and replacement of compressor as per existing make or model ,duly charged with compressor oil and charged with gas including welding in position and testing at required pressure and installing in existing position complete all specified. |
| 38 | M&L for opening up deep freezer 310/400 litre capacity, flushing out and removal of blockage, brazing etc. including replacement of liquid line filter, recharging the refrigerator with R-134/R22 or as per reqdgas to obtain desired cooling and re-fixing in original position complete all specified and directed. |
| 39 | Taking down unserviceable fan motor of capacity 1/6 HP and rewinding with super enamelled copper winding wire of suitable size including replacement of bushes, rubber, mounting clips etc. including commissioning & testing complete all as specified and directed. |
| 40 | Supply and fixing inreplacement of display assembly for deep freezerfor reading inside temperature all as specified and directed. |
| 41 | Removing of defective compressure sealed unit from Refrigerator165 to 286 Ltrs, cutting and supply and fixing new complete of same capacity as per existing make or model, installing with existing system by brazing etc. Flushing of complete system with CO2 gas to detect any leakage if any including charging of refrigent approvedor as per recommendation of manufacture to its full capacity including connecting and testing complete all as directd. Note - Cost of minor spares require to make the equivalent functional shall deemed to beincluded in quoted rate. |
| 42 | All as per item No. 40 here-in-before but refrigeratorcapacity 300/310 litres. |
| 43 | M&L for opening up refrigerator 165 to 310 litre capacity, flushing out and removal of blockage, brazing etc. including replacement of liquid line filter, recharging the refrigerator R-134/R22gas or as per reqd to obtain desired cooling and re-fixing in original position complete all specified and directed. |
| 44 | Supply and replacement of freezer door cover(plastic) forRefrigerator/deep freezercomplete with tension spring as per existing one all specified. |
| 45 | Supply and replacement of pigmy lamp (bulb) of refrigerator as per existingall specified and directed. |
| 46 | Supply and replacement of door megnatic gasket forRefrigerator/deep freezerany capacity as per existing one all specified. |
| 47 | Supply and replacement of over load protector forRefrigerator/deep freezerany capacity all specified and directed. |
| 48 | S&F in replacement of starting capacitor of deep freezer/Refrigertor as per Existing, complete all as specified. |
| 49 | S&F in replacement of Runningcapacitor of deep freezer/Refrigertor as per Existing, complete all as specified. |
| 50 | Supply and replacement of door lock with two key forRefrigerator/deep freezerany capacity complete as per existing all specified. |
| 51 | Thermostat switch with knob for Refrigerator/deep freezeras in replacement complete all as specified. |
| 52 | Starting relay suitable for compressor of Refrigerator/deep freezerof any capacity as in replacement complete all as specified |
| 53 | Evaporator assy with screw, jointing of tubes etc and testing of cap. 165 to 410 LtrsRefrigerator/deep freezer as in replacement complete all as specified. |
| 54 | WATERCOOLERS Checking of Water cooler of any make / capacity at anylocation and positionincludingnecessary servicing comprising of cleaningdrain water system, cleaning condensor ,Cleaning condenser fan motor,cleaning storage, water tank cleaning and check leakage in the storage water tank ofcooler of cooling cap 40/60/150Ltr/hour and making good by soldering/ brazing to prevent leakage spots,testing for proper functioning of water cooler complete all as speicified. |
| 55 | Removing of defective compressure sealed unit from water cooler storage type 40/80 Ltr per hours for repair, cutting supply and fixing new compressor as per existing make or model, sealed unit complete of same capacity including installing with existing system by brazing etc. Flushing of complete system with CO2 gas to detect any leakage if any including charging of refrigent approved R22/134A or as per recommendation of manufacture to its full capacity including connecting and testing complete all as directd. Note-Cost of minor spares require to make the watercooler functional shall deemed to beincluded in quoted rate. |
| 56 | All as per item No. 54 here-in-before but water coolercapacity 60/120 litres. |
| 57 | All as per item No. 54 here-in-before but water coolercapacity 150/150litres. |
| 58 | M&L for taking down unserviceable fan motor for water cooler of any capacity and rewinding with super enamelled copper winding wire of suitable size including replacement of bushes, rubber, mounting clips etc. including commissioning & testing complete all as specifiedand directed. |
| 59 | Thermostat switch with knob for water cooler, having cooling capacity 40/60/80/120/150 Ltrs/hr as in replacement complete all as specified. |
| 60 | M&L for drain PVC pipe, 25/32 mm bore 1.00 metrein length with two Nos mild steel clamps necessary brass screws as in replacement and complete specified and directed . |
| 61 | M&L for drain water tray made out of as per Exiting stainless Steel sheet of deep with necessary GI screws and PVC drain water connection arrangement of size not less than 25 mm diaas in replacement complete all as specified. |
| 62 | S&F for water storage tank top lid as per Exiting steel sheetof existing shape and size for water cooler cap40 to 80 Ltrs, plastic sheet of appropriate thickness on one side withdoor gaskit including , aluminium hinges 50 mm long 2/3 nos. andmaking good and painting with synthetic enamel paint approved colour to match the existing colour complete as in replacement all as specified . |
| 63 | S&F for CP push cock ,15 mm bore made of brass chromium plated self closing horizontal type with CP adaptor and nipple complete as in replacement all as specified. |
| 64 | S&F in replacement of starting capacitor of Water Cooler as per Existing, complete all as specified. |
| 65 | S&F in replacement of Runningcapacitor of Water Cooleras per Existing, complete all as specified. |
| 66 | M&L for PVC float valve 15 mm bore high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball complete with check nut/socket/GI nipple as in replacement complete all as specified. |
| 67 | M & L for Aluminium fan blade for condenser fan motorsuitable for water cooler having cooling capacity 40 Ltr/hr water cooler as in replacement complete all as specified. |
| 68 | M&L for opening of water cooler 60/120, 150/150 litre capacity, flushing out and removal of blockage, brazing etc. replacement of liquid line filter and recharging the water cooler with R-22/ R-134 gas to obtain desired cooling complete all specified and directed. |
| 69 | M & L in repair of Condenser unit complete suitable for 40/60Ltr/hrs cap. Water cooler including gas charging flushing out the system brazing, welding and jointing the suction reed and discharge reed as in replacement complete all as per direction. |
| 70 | M&L for copper filter and capillary tube of water cooler cooling capacity 40/80 Ltr/hrs as in replacement complete all as specified. |
| 71 | M&L for PVC insulated and PVC sheathed flexible cable , multistrandedcopper conductor 3 core 2.5 sq mm cross sectional area superior quality as in replacement complete all as specified. |
| 72 | M& L for scratching out the existing paint with emery paper and filling up the cavaties/scratch with primer and appling spray painting using synthetic enameld paint shades as per Required water coolerbody of capacity 40/60/150 Ltrs and anticorrosive black paint to compressor and base including Genral servicing complete all as directed. |
| 73 | DESERTCOOLERS Taking out and refixingafter repairs, includingrewinding of Desert Cooler fan motor of any make & capacity with super enemaled copper windingwire of appropriate size and testing complete all as specified. |
| 74 | M&L for taking down desert cooler fixed in any position, cleaning internally and externally by scraping all scales dirt etc, carrying out repairs to check leakage, replacing screws, nuts and bolts etc. and painting the same with two coats of synthetic enamel hammer tone paint over one coat of red oxide primer using spray gunwriting of MES No etc ,refixing of the desert cooler in existing position after necessary oilling and greasing of exhaust fan and water lifting pump incl replacement of high density polythene pipe 15mm , complete all specified. |
| 75 | Supply and fixing for heavy duty copper wound desert cooler fan motor1/2 HP , 230 Volt single phase, 1500 rpmcomplete all as specified and directed. |
| 76 | M&L for replacement of Bush for desertcooler fan motor as per existing sample,complete all as specified. |
| 77 | M&L for replacement of bearing for desertcooler fan motor as per existing sample,complete all as specified. |
| 78 | S & F for shaftfor cooler fan motor as per existing sample as in replacement complete all as specified. |
| 79 | S&F for front grill ( horizontal and vertical members moveable) of the Desert Cooler made out ofEsisting gauge PGI sheet as in replacement complete all as specified. |
| 80 | S&F for side/rearpanel made out of Existing gauge PGI Sheet with suitable handles including painting to match with the existing desert cooler as in replacement complete all as specified. |
| 81 | Three speed selector switchthree speed as in replacement at the existing location as directed. |
| 82 | S & Ffor wood pad for Desert Cooler of Sutable size(set of three pads) superior quality including binding properly with GIwire with grill as in replacement complete all specified. |
| 83 | S&F in repalcement of high density polythene pipe 15mm dia incl elbow & TEE,for desert cooler, complete all as specified. |
| 84 | M & L in replacementfor galvanised steel tubing 15mm dia medium grade (ISI marked) including fitting and fixing arrangements on wall/ceiling/roof etc complete all as specified. |
| 85 | Supply and replacement of water lifting pump, submersible type, 18 Watts, 230 volt, 50 C/S, single phase suitable for desert coolers complete all specified. |
| 86 | Supply and fixingin replacement Heavy duty mild steeldesert coolerfan blade as per existing shpe and size, complete all as specified. |
| 87 | M&L for fixing of commercial plywood 4mm thick in window for covering of desert cooler with fixing arrangment complete all as specified. |
| 88 | Supply and replacement of complete steel body of desert cooler of capacity 4000 cfm duly painted with two coats of synthetic enamel hammer tone paint over one coat of red oxide primer externally and one coat of anti- corrosive paint internally complete all as specified and directed. Body of desert cooler shall be fabricated as under:- (a) Top and bottom shall be made out of 1.25mm thick GI sheet. (b) Side panels shall be made out 1.00 mm thick GI sheet. (c) Front grill of suitable size and of approved quality. |
| 89 | S&F for AC box Single pole & Neutral with sheet metal enclosure with 2 pin + Earth, 230 voltas,AC plugandsocket protected withMCB SP, 20 Amps |
| 90 | S&F for switch pianotype, 15 Amps, 240 Volt AC single pole, one way complete all as specified. |
| 91 | Supply andfix in replacement of of plug top 15 amps three pin complete all as specified. |
| 92 | M&L for Socket outlet multi purpose 2 in 1, 6 pin, 5 & 15 Amps, flush type complete all as specified. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
