Tender For Misc. Civil Work And Repair Work In Shrinathji Temple Premises, Nathdwara
Tender Value
10.78 Lakhs
Estimated cost
Bid Submission
27 Apr 2023
0 days left
EMD
21560
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
nathdwara → Rajasthan
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Misc. Civil Work And Repair Work In Shrinathji Temple Premises, Nathdwara
BOQ
| Sl. No. | Item Description |
| 1 | Demolishing cement concrete including disposal of material within 50 mtr lead 1:4:8 or leaner mix |
| 2 | Dismantling stone rubble masonry including stacking of serviceable material and disposal of unserviceable material within 50 mtr lead.In cement mortar |
| 3 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as perof Engineer-in-chargedirection In cement mortar |
| 4 | Brick masonary in Super Structure bricks of class designation 75 in Cement mortar 1:6 ( 1 cement : 6 coarse sand ) |
| 5 | Plaster on new surface on wall in cement sand mortar 1:4 including raking of joints etc. complete fine finish: 20mm thick |
| 6 | Finishing with neat cement (punning) |
| 7 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade : Two or more coats on new work including prepration of base with primer putty lippy complete in allrespect. |
| 8 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade :one or more coats on old work |
| 9 | P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant. 63mm dia |
| 10 | 75mm dia |
| 11 | 110mm dia |
| 12 | 160mm dia |
| 13 | P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant: Coupler (socket) 75mm dia |
| 14 | Coupler (socket) 110mm dia |
| 15 | Reducer 110x75mm 110mm |
| 16 | Plain tee 75MM DIA |
| 17 | Plain tee 110MM DIA |
| 18 | Door tee 75MM |
| 19 | Door tee 110 MM |
| 20 | Bend 87.575MM DIA |
| 21 | Bend 87.5110MM DIA |
| 22 | Bend 45 75MM DIA |
| 23 | Bend 45 110MM DIA |
| 24 | Vent covel 75MM |
| 25 | Vent covel 110MM |
| 26 | Socket plug 75MM |
| 27 | Socket plug 110MM |
| 28 | Painting with enamel paint of approved brand and manufacture to give an even shade: One or more coats on old work |
| 29 | Painting with enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work |
| 30 | Earth work in excavation in foundation trenches or drains including dressing of sides and ramming of bottoms, lift up to 1.5 Mtr, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in lead of 50 mtr. All kinds of soil. |
| 31 | Providing and laying in position cement concrete including curing compaction etc . Completein specified grade excluding the cost of centering and shuttering. All work up to plinth level using crusher broken aggregate M20 grade Nominal Mix ( with graded stone aggregate 20mm nominal size) |
| 32 | Random rubble stone masonry for foundation and plinth in cement sand mortar above 30 cm thick wall in:Cement mortar 1:6( 1 Cement : 6 Sand ) |
| 33 | Random Rubble stone masonry for superstructure above plinth level one storey height above 30 cm. thick walls in : Cement mortar 1:6 ( 1 Cement : 6 Sand ) |
| 34 | Providing and fixing steel gate grating and grills made of angles, tees, square bars orflats black pipe with holdfast and fittings complete as per deign and drawing including cutting welding and fabrication with priming coat of red oxide. |
| 35 | Extra if square,rectangular hollow tubelar sections are used or grill made by flats only |
| 36 | Repair to cement Plaster in cement mortar 1:6 (1 cement :6 fine sand) including removal of old plaster in regular shape and white or colour washing |
| 37 | White washing with lime to give an even shade including all scaffolding :New work (three or more coats) |
| 38 | Old work (two or more coats) including scrapping old surface and repairing with whiting where ever necessary |
| 39 | Supplying and fixing stone lintels/bed plates of approved quarry rough dressed in cement mortar 1:4 Up to 15 cm thick |
| 40 | Polished Blue Kota stone flooring skirting laid over 20mm thick base of CM 1:4 and jointed with gray cement slurry to match the shade of the slab including rubbing and polishing complete For area of each slab From2001Sq.cm to 5000 sq.cm 25 mm thick slab |
| 41 | Applying Birla /JK white cement based putty over cement plaster surface for making even surface |
| 42 | ProvidingandfixingIstqualityMATfinishedceremictilessize 300 x 300 mm confirming to IS: 13755 & IS: 15622 colour such as white, grey, Ivory, fume red brown in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry including nicely finished joints using water proof joint filler powder and finishing with flush pointing in white cement mixed with pigment to match the shadeof tile complete (including the cost of cement mortar bed 1:4). |
| 43 | Providing and fixing 1st quality MAT & GLOSSY finished ceramic tile confirming to IS : 13755 and IS : 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4). Size 300mm x 450mm |
| 44 | Dry stone kharanja undre floor |
| 45 | Carriageoffollowingmaterialincludingloadingunloadingand stackingifrequiredcompleteinallrespect.Earth,Sand,Lime, Moorum, manure or sludge, Building Rubbish, Stone Metal (Girt and ballast etc), Stone for Masonry work & Soling and Excavatedrock etc. upto 5km. |
| 46 | Stone slab roofing on ground floor with fine grained stone slab from approved quarry including filling of joints of parapet and slab on both sides in cement sand mortar 1:4,with ceiling pointing in cement sand mortar 1 : 3 complete as per specification and instruction of Engineer In Charge |
| 47 | Supplying and fixing rolling shutters of approved make, made of 80x1.25 mm M.S. laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially desigened pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete including cost of spring hooks, providing and fixing necessary 25.3cm long wire springs grade No. 2 and M.S. top cover 1.25 mm thick for rolling shutters as per design,(clear openable area to be measured for payment). |
| 48 | Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. (\"Original producers\" who manufacture billet directly from iron ores and roll the bilets to produce steel conforming to IS:1786) Thermo-mechanically Treated bars (Conforming of relevent IS code) |
| 49 | Providing and laying in position specified grade of cement concrete for all RCC structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement. M20 grade Nominal Mix / Design Mix |
| 50 | Providing & fixing door, window, chowkhats and other frames, including antitermite treatment, M.S. flat, hold fasts of size 250 x 40 x 3mm fixed with M.S. bolt 5mm dia 50mm long duly embedded in cement concrete M-15 grade : Ivory coast wood Grade I |
| 51 | Providing and fixing external grade board solid core singleleaf flush door shutters ISI 2202-67 marked using Phenolformal dehyderesin in glue both sides with approved steelfittings complete as per annexure \"A\" :30 mm thick . Decorative teak veneer both side |
| 52 | Structural steel work in single section fixed with or without connecting plate including cutting, hoisting ( height upto 10 m), fixing in position and applying a priming coat of approved steel primer all complete. |
| 53 | Add Extra if I/rail section is used |
| 54 | Dismantling roofing including ridges, hips, valleys and rafters etc. and stacking the within 50 meter lead of: G.I. Sheet. |
| 55 | Dismantling old plaster or skirting, raking out joints andcleaning the surface for plaster including disposal of rubbishto the dumping ground within 50 meter lead. |
| 56 | Dismantling tile work in floors and roofs laid in cement mortar including stacking of serviceable material and disposal ofunserviceable material within 50 meter lead:For thickness of tiles 10mm to 25mm |
| 57 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceablematerial within 50 metres lead as per direction of Engineer-incharge. |
| 58 | L/C for fixing of GI/AC sheet include. Cutting jhiri and repair, cutting of sheet , fixing of sheet with J or L hook andbitumen washer as per direction of EI |
| 59 | Supplying and Filling in plinth with river sand under floorsincluding watering ramming consolidating and dressingcomplete including cost of sand |
| 60 | Half brick masonry in Superstructure , above plinth level upto floor V level using bricks of designation 75 Cement mortar 1 : 4 (1 cement : 4 coarse sand) |
| 61 | Providing ridges or hips of width 60 cm over all width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia. G.I. limpet and bitumen washers complete. 0.63mm thick with zinc coating not less than 275 |
| 62 | Providing & fixing door, window, chowkhats and other frames, including antitermite treatment, M.S. flat, hold fasts of size 250 x 40 x 3mm fixed with M.S. bolt 5mm dia 50mm long duly embedded in cement concrete M-15 grade : Nigeria teak wood Grade - I. |
| 63 | Providing and fixing welded mesh/expanded metal mesh inframe work, flat iron beading 20x3mm including top cross lapsinside and out sides welding, iron bolts, crews, clips etc.complete (excluding frame work) of size.Welded mesh 25 mmx 25 mm x 2.1 mm |
AI Tender Summary
Tender Timeline
Apr 08, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedApr 27, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedApr 29, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender