Construction Of Museum Building At Kalpa In Distt. Kinnaur (H.P.) (Sh:- Building Portion, Ws & Si, C/O Septic Tank & Site Development )
Tender Value
1.96 Crore
Estimated cost
Bid Submission
17 Apr 2023
0 days left
EMD
3.94 Lakhs
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
kalpa → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Museum Building At Kalpa In Distt. Kinnaur ( H.P. ) ( Sh:- Building Portion, Ws & Si, C / O Septic Tank & Site Development )
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains, including dressing of sides and ramming of bottoms, including getting out the excavated soil and disposal of surplus excavated soil as directed. All kinds of soil, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government. |
| 2 | Centering and shuttering including strutting, propping etc. and removal of form,including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-chargeincluding all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government. |
| 3 | Foundations, footings, bases of columns, etc. for mass concrete |
| 4 | Suspended floors, roofs, landings, balconies and access platform |
| 5 | Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 6 | Edges of slabs and breaks in floors and walls. |
| 7 | Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. |
| 8 | Providingandlayinginpositioncementconcreteofspecifiedgrade excluding the cost of centering and shuttering - All work up to plinth level : 1:5:10 (one cement : five coarse sand: ten graded stone aggregate 40 mm(fourty millimeter) nominal size), including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-chargeincluding all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government. |
| 9 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth levelts, 1:4:8 (one Cement : four coarse sand : 8 graded stone aggregate 40 mm(fourty milliteter)nominal size), including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. |
| 10 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:2:4 (one Cement : two coarse sand) : four graded stone aggregate 40 mm(fourty millimeter) nominal size), including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-chargeincluding all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government. |
| 11 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (one cement : one point five coarse sand) : three graded stone aggregate 20 mm (twenty millimeter) nominal size), including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government. |
| 12 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-chargeincluding all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government. |
| 13 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:6 (one cement : six coarse sand), including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-chargeincluding all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government. |
| 14 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level Cement mortar 1:4 (one cement :four coarse sand), including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-chargeincluding all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government. |
| 15 | Boulder filling tightly hand packed under floors, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-chargeincluding all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government. |
| 16 | Coursed rubble masonry (first sort) with hard stone in foundation and plinth with Cement mortar 1:6 (one cement : six coarse sand), including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-chargeincluding all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government. |
| 17 | Random rubble masonry with hard stone in superstructure above plinth level and upto floor five level, including leveling up with cement concrete 1:6:12 (one cement : six coarse sand : twelve graded stone aggregate 20 mm(twenty millimeter) nominal size) at window sills, ceiling level and the like. Cement mortar 1:6 (one cement : six coarse sand),including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-chargeincluding all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government. |
| 18 | Cement concrete flooring 1:2:4 (one cement : two coarse sand : four graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm (fourty millimtere) thick with 20 mm( twenty millimeter) nominal size stone aggregate,including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-chargeincluding all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government. |
| 19 | Providing woodwork in frames of doors, windows, clerestory, windows and other frames wrought, framed and fixed in position in all floors, 2nd class Deodar wood, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-chargeincluding all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government. |
| 20 | Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position with necessary stainless steel screws etc. Rai Woodincluding carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-chargeincluding all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government. |
| 21 | Providing and fixing 12 mm(twelve millimeter) thickwooden plank ceiling with tongued and grooved jointing and wood screws(Frame work and cover fillets to be measured and paid for separately) Rai wood, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-chargeincluding all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government. |
| 22 | 25 mm(twenty five millimeter) wooden planking tongued and grooved, in flooring fixing to wooden base frame with iron screws complete (base wooden frame to be paid separately), First class deodar wood planks, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-chargeincluding all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government. |
| 23 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm(twenty five millimeter) to 40 mm(fourty millimeter) thick. 2nd class deodar wood, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-chargeincluding all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government. |
| 24 | Providing and fixing wire gauge shutters using stainless steel grade 304 wire gauge with wire of dia 0.5 mm(zero point five millimeter) and average width of aperture 1.4 mm(one point four millimeter) in both directions for doors, windows and clerestory windows with necessary screws 35 mm(thirty five millimeter) thick shutters, second class deodar wood, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-chargeincluding all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government. |
| 25 | ProvidingandfixingM.S.grillsofrequired pattern in frames of windows etc. with M.S. flats, square or round barsetc.includingprimingcoatwithapprovedsteel primer all complete. Fixed to steel windows by welding, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-chargeincluding all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government. |
| 26 | Providing and fixing 75 mm x 60mm(seventy five into sixety millimeter) rounded hand rails in straight length complete in. 1st class deodar wood. including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-chargeincluding all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government. |
| 27 | Providing and fixing chromium plated brass sliding door bolts with nuts and screws etc. complete, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-chargeincluding all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government. |
| 28 | 300x16 mm(three hundred into sixteen millimeter) |
| 29 | 250x16 mm(two hundred fifty into sixteen millimeter) |
| 30 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-chargeincluding all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government. |
| 31 | 200×10 mm(two hundred into ten millimeter) |
| 32 | 150×10mm (one hundred fifty into ten millimeter) |
| 33 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-chargeincluding all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government. |
| 34 | 125 mm(one hundred twenty five millimeter) |
| 35 | 100 mm(one hundred millimeter) |
| 36 | Providing and fixing oxidized M.S. hooks and eyes.200 mm(two hundred millimeter),including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-chargeincluding all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government. |
| 37 | Providing and fixing oxidized M.S. hasps and stapples (safety type) with necessary screws etc. complete, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-chargeincluding all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government. |
| 38 | 150 mm(one hundred fifty millimter) |
| 39 | 115 mm(one hundred fifteen millimter) |
| 40 | Providing and fixing 12 mm(twelve millimeter) thick prelaminated board both side bwp phenol bonded exterior/interior grade shutters withframe of 1st class deodar wood for cup board including nickel plated bright finished piano hinges -25mm(twenty five millmeter) thick frame, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-chargeincluding all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government. |
| 41 | Providing and fixing 19mm(nineteen millimeter)thick Commercial Board water proof shutters for up boards including fixing with nickel plated piano hinges with screws etc complete, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-chargeincluding all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government. |
| 42 | Providing and fixing ply wood lining with butt jointing and nails (frame work and cove fillets to be measured and paid for separately) 6 mm(six millimeter) thick, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-chargeincluding all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government. |
| 43 | Providing and fixing particle board lining with butt jointing and nails (frame work and cover fillets to be measured and paid separtely).12 mm(twelve millimeter) thick, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-chargeincluding all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government. |
| 44 | Providing and fixing plain skirting with butt jointing and screws (frame work and cover fillets to be measured and paid for separately) with. First class deodar wood.12 mm(twelve millimeter)thick, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-chargeincluding all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government. |
| 45 | Providing and fixing 2mm(two millimeter) thick PVC antistatic venyl Flooring plain or coloured, carbed or mosaic/metalled finish laid with approved adhesive on sub-floor (damp proofing treatment to be paid for separately), including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-chargeincluding all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government. |
| 46 | Providing and fixing 19mm(nineteen millimeter) thick water proof commercial board in shelves/box for cup board with butt joints & fixing with nails & screws etc complete, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-chargeincluding all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government. |
| 47 | Providing and fixing 1.00mm(one point zero millimeter) thick coloured or plain lamination sheet (sunmica) on boards/ply wood sheets with approved adhesive and nails etc complete, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-chargeincluding all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government. |
| 48 | Providing and fixing square edges cover fillets (beading) 19mmx6mm(nineteen into six millimeter)section including mitring at junctions with wood screws and nails complete. 1st class deodar wood, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-chargeincluding all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government. |
| 49 | Providing and laying local slate flooring laid in cement mortar 1:4 (one cement : four sand) and jointed with gray cement slurry, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-chargeincluding all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government. |
| 50 | Providing and laying matt finished vitrified tile of size 300x300x9.8mm( three hundred into three hundred into nine pont eight millimeter) having with water absorption less than 0.5%(zero point five percent) and conforming to IS: 15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm(twenty millimeter) thick base of cement mortar 1:4 (one cement : four coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. ,including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-chargeincluding all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government. |
| 51 | Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS :15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approvedby Engineer-in-Charge in skirting, risers of steps and dados over 12 mm(twelve millimeter) thickbed of cement Mortar 1:3 (one cement: three coarse sand) and jointing with grey cement slurry @ 3.3kg(three point three kilogram) per sqm including pointing in white cement mixed with pigment of matching shade complete, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-chargeincluding all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government. |
| 52 | Slate roofing with 7.5 cm(seven point five centimeter) Single lap single layer fixed on wooden batten(wood work to be paid for separately).With slates 40x20 cm(fourty into twenty centimeter) size,including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-chargeincluding all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government. |
| 53 | Providing and fixing ridges or hips 60 cm(sixty centimeter) overall with 0.60mm(zero point six zero millimeter) thick prepainted steel sheets in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20(twenty) microns over 5(five)microns primer coating + back coat of polyster of 5(five) microns over 5(five) microns primer coating including fixing with prepainted iron J or L hooks, bolts & nuts 6mm(six millimeter) dia & prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer in Charges, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-chargeincluding all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government. |
| 54 | Providing and fixing valley 60 cm(sixty centimeter) overall 0.60mm(zero point six zero millimeter) thick prepainted steel sheet in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyster of 5(five) microns over 5(five) microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm(six millimeter) dia with prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer-in-charge,including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-chargeincluding all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government. |
| 55 | Providing and fixing 15 cm(fifteen centimeter) wide, 45 cm(fourty five centimeter) overall semi-circular plain G.S. sheet gutter with iron brackets 40x3mm(fourty into three millimeter) size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete. 0.80 mm(zero point eight zero millimeter) thick with zinc coating not less than 275 gm/m²(two hundred seventy five gram per meter square), including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-chargeincluding all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government. |
| 56 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm(ten millimeter) gap for thermal expansion, (i) Single socketed pipes. 110 mm(one hundred ten millimeter) diameter, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-chargeincluding all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government. |
| 57 | Providing and fixing on wall faces PVC (D-Plast) accessories for rain water pipes including filling the joints with approved adhesive complete, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-chargeincluding all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government. |
| 58 | Providing and fixing m.s.holder bat clamps of approved design to C.I. or S.C.I pipes embeded in and including cement concrete blocks 10 x10x10 cm of 1:2:4:mix (one cement two sand four stone graded stone aggregate 20 mm(twenty millimeter) nominal size) and cost of cutting holes and making good the wall etc. , including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-chargeincluding all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government. |
| 59 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-chargeincluding all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government. |
| 60 | Providing eaves board 200mmx25mm(two hundred into twenty five millimeter) thick including fixing in position 2ndclass Deodar wood, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-chargeincluding all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government. |
| 61 | Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete 2nd class teak wood 50x12 mm(fifty into twelve millimeter), including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-chargeincluding all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government. |
| 62 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm(zero point nine zero litre per ten square meter) over an under coat of primer applied @ 0.80 ltr/ 10 sqm(zero point eight zero litre per ten square meter) of approved brand and manufacture, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-chargeincluding all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government. |
| 63 | Applying priming coat With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood), including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-chargeincluding all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government. |
| 64 | Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm(zero point nine zero litre per ten square meter) over an under coat of primer applied @0.75 ltr/10 sqm(zero point seven five litre per ten square meter) of approved brand and manufacture, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-chargeincluding all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government. |
| 65 | Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade.Two or more coats on new work, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-chargeincluding all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government. |
| 66 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: One or more coats on new work, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-chargeincluding all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government. |
| 67 | Providing and applying white cement based putty of average thickness 1 mm(one millimeter), ofapprovedbrandandmanufacturer,overtheplastered wallsurfaceto prepare the surface even and smooth complete, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-chargeincluding all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government. |
| 68 | Melamine polishing on wood work (one or more coat), including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-chargeincluding all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government. |
| 69 | Distempering with synthestic /acrylic distemper 1st quality acrylic distemper(ready mixed) of approved manufacturer, of required shade and colour complete, as per manufacturer\"s specification.Two or more coats on new work,including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-chargeincluding all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government. |
| 70 | 6 mm(six millimeter) cement plaster of mix 1:3 (one cement : three fine sand), including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-chargeincluding all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government. |
| 71 | 15 mm (fifteen millimeter) cement plaster on the rough side of single or half brick wall of mix : 1:6 (one cement: six fine sand), including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-chargeincluding all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government. |
| 72 | Providing and laying 60mm(sixety millimeter) thick faciory made cement concrete interlocking paverblockofM-30grade made by block making machine with strong vibratory compaction, ofapproved s;ze, design & shape, laid in required colour and pattern over and including 50mm(fifty millimeter) thick compacted bed of coarse sand, filling the joints with line sand etc. all complete, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-chargeincluding all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government. |
| 73 | Making plinth protection 50mm thick of cement concrete 1:3:6 (one cement : three coarse sand (zone - III) : six graded stone aggregate 20 mm(twenty millimeter) nominal size) over 75mm(seventy five millimeter) thick bed of dry brick ballast 40 mm(fourty millimeter) nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-chargeincluding all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government. |
| 74 | Providing and fixing M.S. Post 10 cm( ten centimeter) dia. ,including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government. |
| 75 | W.S.&S.I.Providing & fixing White vitreous china water closet squatting pan (Indian type) along with “S” or “P” trap including dismantling of old WC seat and “S” or “P” trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge Orissa pattern W.C Pan of size 580x440 mm(five hundered eighty into four hundred fourty millimeter), including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-chargeincluding all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government. |
| 76 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10(ten) litre low level white vitreous china flushing cistern & C.P.flush bend with fittings & C.I.brackets, 40 mm(fourty millimeter) flushbend, overflow arrangement with specials of standard make and mosquito proof coupling of approvedmunicipaldesigncomplete,includingpaintingoffittingsand brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid,including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-chargeincluding all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government. |
| 77 | Providing and fixing wash basin with C.I. brackets, 15 mm(fifteen millimeter) C.P. brass pillar taps, 32 mm(thirty two millimeter) C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Flat back wash basin size 550x 400 mm(five hundred fifty into four hundred) with single 15 mm(fifteen millmieter) C.P. brass pillar tap, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-chargeincluding all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government. |
| 78 | Providing and fixing 600x450mm(six hundred into four hundred fifty millimeter) beveled edge mirror of superior glass (of approved quality) complete with 6 mm(six milimeter) thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-chargeincluding all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government. |
| 79 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement ofapproved quality and colour. 600 mm(six hundred millimeter)long towel rail with total length of645 mm(six hundred fourty five millimeter), width 78 mm(seventy eight millimeter) and effective height of 88 mm(eighty eight millimeter), weighing not less than 190 gms(one hundered ninety gram), including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-chargeincluding all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government. |
| 80 | Providing and fixing toilet paper holder : C.P. brass, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-chargeincluding all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government. |
| 81 | Providing and fixing PTMT soap Dish Holder having length of 138mm(one hundred thirty eight millimeter), breadth 102mm(one hundred two milimeter), height of 75mm(seventy five millmeter) with concealed fitting arrangements, weighing not less than 106 gms(one hundred six gram), including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-chargeincluding all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government. |
| 82 | Providing and fixing C.P brass bib taps with capstan head weigth 400 gms(four hundred gram) . 15mm(fifteen millimeter) dia. , including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-chargeincluding all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government. |
| 83 | Providing and fixing C.P Brass pillar tap with capstan head, 15mm(fifteen millimeter) dia.,including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-chargeincluding all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government. |
| 84 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931,including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-chargeincluding all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government. |
| 85 | Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm(fourty five centimeter) length 15 mm(fifteen millimeter) nominal bore,including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-chargeincluding all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government. |
| 86 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS:15801 UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, including trenching, refilling & testing of joints complete, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-chargeincluding all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government. |
| 87 | PN-16 Pipe, 15mm(fifteen millimeter) OD (SDR-7.4) |
| 88 | PN-16 Pipe, 20mm(twenty millimeter) OD (SDR-7.4) |
| 89 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-chargeincluding all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government. |
| 90 | Providing and fixing PVC floor trap of self cleaning designincluding fixing withapproved adhesive, cost of cutting and making good the wall and floors etc. complete. 110 mmX90 mm(one hundred into ninety millimeter), including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government. |
| 91 | Providing and fixing ISI marked high pressure PVCspigot and socket, waste and ventilating pipes including fixing withapproved adhesive etc. complete, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-chargeincluding all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government. |
| 92 | 150 mm dia.(one hundred fifty millimeter) |
| 93 | 110 mm dia.(one hundred tne millimeter) |
| 94 | Providing and fixingPVCdoor bend with oval access door, insertion rubber washer 3 mm(three millimeter) thick bolts and nuts complete including fixing withapproved adhesive etc. complete,including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-chargeincluding all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government. |
| 95 | 150 mm dia.(one hundred fifty millimeter) |
| 96 | 110 mm dia.(one hundred tne millimeter) |
| 97 | Providing and fixingPVCplain bend including fixing withapproved adhesive etc. complete,including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-chargeincluding all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government. |
| 98 | 150 mm dia.(one hundred fifty millimeter) |
| 99 | 110 mm dia.(one hundred tne millimeter) |
| 100 | Providing and fixingPVCcollar including fixing with approved adhesive etc. complete, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-chargeincluding all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government. |
| 101 | 150 mm dia.(one hundred fifty millimeter) |
| 102 | 110 mm dia.(one hundred tne millimeter) |
| 103 | Providing and fixing brass stop cock of approved quality : 15 mm(fifteen millimeter) nominal bore, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-chargeincluding all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government. |
| 104 | Providing and fixingPVCreducer including jointing withapproved adhesive etc. complete,including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-chargeincluding all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government. |
| 105 | 150 mm X 110 mm dia.(one hundred fifty into one hundred ten millimeter) |
| 106 | 110 mm X 75 mm dia.(one hundred ten into seventy five millimeter) |
| 107 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. 10(ten) litre capacity - White, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-chargeincluding all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government. |
| 108 | Providing and fixing 8 mm(eight millimeter) dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-chargeincluding all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government. |
| 109 | Providing and fixing 100 mm(one hundred millimeter) sand cast Iron grating for gully trap,including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-chargeincluding all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government. |
| 110 | Providing and fixing white Glazed fire clay stall urinal of standard size.1150mmx500mm(one thousand one hundred fifty millimeter into five hundred millimeter), including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-chargeincluding all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government. |
| 111 | Providing and fixing division plate for urinals, 600mmx330mm(six hundred millimeter into three hundred thirty millimeter) size, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-chargeincluding all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government. |
| 112 | Constructing masonry Chamber60x60x75cm(sixety into sixety into seventy five centimeter), insidein brick work incement mortar 1:4 (one cement : four coarse sand) for fire hydrants, with C.I. surface box 350x350 mm(three hundred fifty into three hundred fifty millimeter) top and 165 mm(one hundred sixety five millimeter) deep(inside) with chained lid and RCC top slab 1:2:4 mix (one cement : two coarse sand : four graded stone aggregate 20 mm(twenty millimetre) nominal size), i/c necessary excavation, foundation concrete 1:5:10 (one cement : five fine sand:ten graded stone aggregate 40 mm(fourty millimeter) nominal size) and inside plastering with cement mortar 1:3 (one cement : three coarse sand) 12 mm(twelve millimeter) thick, finished with a floating coat of neat cement complete as per standard design :With common burnt clay F.P.S.(non modular) bricks of class designation 7.5, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-chargeincluding all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government. |
| 113 | Providing and laying cement concrete 1:4:8 (one cement : four sand : eight graded stone aggregate 40mm(fourty millimetre) nominal size) bedding for stone ware pipe of the following internal dia metre necessary form work and curing complete. 250mm(two hundred fifty millimeter),including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-chargeincluding all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government. |
| 114 | ProvidingU-shape drain 23 cm(twenty three centimeter) thick half round stone ware pipe, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-chargeincluding all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government. |
AI Tender Summary
Tender Timeline
Apr 08, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedApr 17, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedApr 18, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender