Tender For Repair Of Road From Raina Sagrai Road Near Daluidighi More To Badsahi Road Near Shyamdasbati Via Nandal Within Raina-I Block Phase-Ii
Tender Value
Ref. Documents
Estimated cost
Bid Submission
15 Apr 2023
0 days left
EMD
20000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
raina → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Repair Of Road From Raina Sagrai Road Near Daluidighi More To Badsahi Road Near Shyamdasbati Via Nandal Within Raina-I Block Phase-Ii
BOQ
| Sl. No. | Item Description |
| 1 | DressingandchilchallingRoadflanksincluding cutting and filling with earth up to 150 mm average thicknessfinishedwithoutwardcross-gradeof1in 30. |
| 2 | ProvidingandapplyingtackcoatwithCationic Bitumen Emulsion of approved grade conforming to IS: 8887-1978 on the prepared surface cleaned with Hydraulicbroom,moisteningthesurfaceincluding costandcarriageofemulsion,hirechargesof machinery and labour, cost of fuel and lubricants all completeasperClause503ofSpecificationsfor Road & Bridge Works of MoRT&H (5th Revision)On Granular surfaces treated with primer(Using Bitumen emulsion at the rate of 0.25 to 0.30 kg per sqm.) |
| 3 | Providing, laying and rolling of Open - graded premix surfacing of 20 mm thickness composed of 13.2 mm (@ 0.018 m³ per m²) and 11.2 mm (@ 0.009 m³ per m²) size stone aggregates, including thoroughly cleaningof the surface, screening, cleaning and pre-heating stone chips and fully pre-coating the same either using viscosity grade paving bitumen or cut-back or emulsion, carrying the mixture by any suitable arrangements, laying the mixture uniformly over the surface, including line, grade and level to serve as wearing course on a previously prepared base,including mixing in Mobile Hot Mix Plant (Light Duty) and thoroughly rolling with a smooth wheeled roller 8-10 tonne capacity, finished to required level and grades including the cost and carriage of stone chips and matrix, heating the matrix, preheating the aggregates to required temperature and including the hire charges of Mobile Hot Mix Plant (Light Duty) and other machinery, pay of operators, cost of fuel and lubricants etc. complete to be followed by seal coat of either Type A or Type B as per Technical Specification Clause 508 for Rural Roads of MORD. |
| 4 | ProvidingandlayingPremixedSealCoat(TypeB) withapprovedqualitysand/[email protected]/100m2andbitumenbinderonthoroughlycleanedblacktop surface coated with tack coat, including heatingand mixing cleaned sand/grit (100 % passing through2.36mmsieveandretainedon180micronsieve)uniformly with bitumen binder, laying and spreading themixatanuniformrate usingsuitablemeans,brushingthesurface,ifnecessary,toensureuniformity,followedbyrollingwithpowerrollerincludingthecostandcarriageofbinderandaggregates,costofheatingthebinderand aggregates and all other incidental charges, cost offuelandlubricants,includinghirechargesofmachineries, tools & plants required for constructionandqualitycontrolcompleteasperClause511ofSpecificationsforRoad&BridgeWorksofMoRT&H(5th Revision). By ManualMeans (i)With Hot Bitumen Binder (@ 6.80 kg / 10 sqm.) |
| 5 | Repairing pot-holes and making up small depressions with ramming or power rolling including screening, cleaning chips or metals and washing, drying as necessary and heating the chips or metal where necessary, cutting pot holes to regular shapes with vertical edges, cleaning the disintegrated materials, heating matrix and applying tack coat (including sides), finishing the top of repaired surface levelled with adjoining area, including cost and carriage of stone aggregates and matrix, excluding cost of applying tack coat. [Tack coat is to be considered separately]With premixed Chips or Bajrees with 54 kg ofbitumen per m3 of loose net volume of stone chips using concrete mixer machine. (The payment is to be made on the basis of loose netvolume of stone materials consumed in the work)(a) Using suitable pan |
| 6 | Earthworkinexcavationfromborrowpits(land owned/arranged by the Department) and depositing inlayers of250mm.includingbreakingclodsinembankment works and to fill up back of abutments, depressions and ruts with an initial lead up to 50 m and initial lift up to 1.5 m makingbunds at top as directed dressing complete. (Borrow pit measurement) |
| 7 | Supplying sign-board made of 25 mm thick sal plank with frame on all side of sal batten 50 mm x 32 mm with nailed on post 3.15mx 100mmx 100mm and fitting fixing such with digging holes of dia 300 mm and depth 750 mm in all sorts of soil and repacking and consolidating the gap around the post with cement concrete (1 : 3 : 6) painting 2 coats including cost of nails, bolts and nuts etc. complete in all respect as per direction of the Engineer-in-charge.Payment of concrete and painting to be made separately.900 mm. x 600 mm. size of board |
| 8 | Add18% forGST |
| 9 | Add 1% for Worker Welfare Cess |
AI Tender Summary
Tender Timeline
Apr 08, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedApr 15, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedApr 17, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender