Military Engineer Services-MES has published Tender For Repair/Replacement Of Internal Wiring With Replacement Of Certain Electrical Fitting Fixture At Tech Area, Including Hangars, Billets, Sncos Mess, Airmen Mess, Tettra Mess Dsc Mess And Repair/Replacement Of Fans, Geysers And Allied Service. Submission Date for this Tender is 28-04-2023. Electrification Work Tenders in bagdogra West Bengal. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 20-Apr-2023 | BOQ Corrigendum | BOQ | 28-04-2023 |
| Sl. No. | Item Description |
| 1 | Taking down carefully copper/aluminium point wiring complete (light, fan, plug point & power complete alongwith fittings (switches, ceiling roses, tube light fittings, bulk head fitting regulator, sockets ,removing materials to store and offering credit & making good of disturb surfaces of wall/floors etccomplete all as specified & asdirected. |
| 2 | M&L for Point wiring with 1.5 Sqmm(22/0.30mm) PVC insulated andunsheathed multistranded copper conductor cable, 1100 volts grade, ISI marked, FRLS type drawn through and including PVC concealed conduit (ISI marked) of adequate size and its accessories with sunk cast iron/pressed steel terminal boxes of size 1.6mm thick, with 3mm thickplastic laminated sheet cover of adequate sizeincl 1.5 Sqmm (nominalarea) copper conductor cable (multistrand), FRLS type, PVC insulated and unsheathed with colour code earth wire connected to common earth dolly at one end and metalic bodies of luminaires/ fan at other end complete as per site requirement and complete all as specified & asdirectedfor one light point or one fan point controlled by one switch. Note:-Unit rate include for cutting chases for conduits and sinking for boxes andmaking good to wall, floors etc. |
| 3 | All as per ser item No. 2 above, but for One 5 Amp 5 pin socket outlet point on same board with other switches including earth wire complete all as specified & asdirected. |
| 4 | All as per ser item No. 2 above, but for One 5 Amp 5 pin socket outlet point on independent board complete all as specified & asdirected. |
| 5 | All as per ser item No. 2 above, but with 4.0 Sqmm (36/0.30mm) PVC copper stranded cable FRLS type for one 15 Amp 5 pin socket outlet point including PVC cable 4 Sqmm FRLS type copper stranded conductor as earth wire as specified & connected to common earth & earth terminals including boards for mounting purposes complete all as specified & asdirected. |
| 6 | All as per ser item No. 2 above, but for one light point controlled by 2 way switches complete all as specified & asdirected. |
| 7 | All as per ser item No. 2 above, but for one bell/buzzer point controlled by one push button on the same board with other switches or independent complete all as specified & asdirected. |
| 8 | M&L for Point wiring with 1.5 Sqmm(22/0.30mm) PVC insulated andunsheathed multistranded copper conductor cable, 1100 volts grade, ISI marked, FRLS type drawn through and including PVC casing caping (ISI marked) and its accessories such as Tee, elbow, jointer, elbow corner etc. fixed on surface of walls, columns/ beams alongwith 1.5 Sqmm (nominalarea) copper conductor cable (multistranded) PVC insulated and unsheathed FRLS type as earth wire connected to common earth dolly at one end and metalic bodies of luminaire/ fan at other end including PVC folding boardswith sunmica top for mounting switches, sockets, fan Regulators, accessories etc as per site requirement and complete all as specified & as directed for one light point or one fan point controlled by one switch. |
| 9 | All as per ser item No. 8 above, but for One 5 Amp 5 pin socket outlet point on same board with other switches including earth wire as specified. |
| 10 | All as per ser item No. 8 above, but for One 5 Amp 5 pin socket outlet point on independent board. |
| 11 | All as per ser item No. 8 above, but for 4.0 Sqmm (36/0.30mm) PVC copper stranded cable FRLS type for one 15 Amp 5 pin socket outlet point including PVC cable 4 Sqmm FRLS type copper stranded conductor as earth wire as specified & connected to common earth & earth terminals including boards for mounting purposes. |
| 12 | All as per ser item No. 8 above but for one bell/buzzer point controlled by one push button on the same board with other switches or independent complete all as specified & asdirected. |
| 13 | All as per ser item No. 8 here in before but one light point controlled by 2 way switches complete all as specified & asdirected. |
| 14 | S&F bell push, flush type, 5 Amp single pole, 230 volts white finish complete all as specified & asdirected. |
| 15 | S&F switch piano flush button 5 Amp single pole 2 way 230 volts white finish complete all as specified & asdirected. |
| 16 | S&F in replacement switch piano flush button 5 Amp single pole one way 230 volts white finish all as specified & directed. |
| 17 | S&F in replacement of socket outlet flush type 5 pin 5 Amp multipurpose 230 volts single pole one way suitable for 3 pin/2pin 5 Amp plug top white/ivory finish complete all as specified & asdirected. |
| 18 | S&F in replacement switch socket combination flush type 5 pin 5 Amp multipurpose 230 volts single pole one way suitable for 3 pin/2pin 5 Amp plug top white/ivory finish complete all as specified & asdirected. |
| 19 | S&F in replacement of switch socket combination multipurpose flush type 2 in 1 type (3 and 5 pin) 5/15 Amps, 230V, AC complete all as specified & asdirected. |
| 20 | S&F in replacement ceiling rose surface PVC 50mm dia 3 terminals including PVC mounting block white/ivory finish complete all as specified & directed. |
| 21 | S&F in replacement surface and wall mounted LED batten 20 watt - 4Ft White with Aluminum housing & integrated electronic driver, high performance batten and efficacy should not less than100 lumen/watt and complete all as specified & directed. |
| 22 | S&F in replacement surface and wall mounted LED batten 10 watt - 2Ft White with Aluminum housing & integrated electronic driver, high performance batten and efficacy should not less than 100 lumen/watt and complete all as specified & asdirected. |
| 23 | S&F in replacement LED light fitting 1x9W/ 1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size as per site requirement and complete all as specified & directed. |
| 24 | S&F in replacement energy efficient Street/ Roadway/Building Security Luminaire LED fitting upto 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete, including brackets and all accessories needed to fixed to the wall or pole all as per site requirement and complete all as specified & directed. |
| 25 | S&F in replacement Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fitting complete all as specified & directed. |
| 26 | S&F in replacement stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqdall as specified and directed of approved make complete all as specified & directed. |
| 27 | S&F in replacement exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers complete as per site requirement and complete all as specified & directed. |
| 28 | Taking down carefully copper/aluminium sub main wiring completealongwith all connected accessories etc complete all as specified & directed. |
| 29 | S&F submain wiring with two single core PVC insulated unsheathed, multistranded flexible copper conductor 1100Volts grade, FRLS type, cables 6 Sqmm drawn through in and including rigid PVC heavy duty concealed conduits including 6 Sqmm 1100Volts grade, FRLS type, PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals complete all as specified and directed. Note:- (i)Two runs of cables and one run of continuous earthing cable and conduit will be measured as one length of sub main with colour code Red Black and Green. (ii)PVC conduit and its accessories are deemed to be included in this item rate. (iii) Unit rate include for cutting chases for conduits and sinking for boxes andmaking good to wall, floors etc. |
| 30 | S&F submain wiring with two single core PVC insulated unsheathed, multistranded flexible copper conductor 1100Volts grade, FRLS type, cables 10 Sqmm drawn through in and including rigid PVC heavy duty concealed conduits including 10 Sqmm 1100Volts grade, FRLS type, PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals complete all as specified and directed. Note:- (i)Two runs of cables and one run of continuous earting cable and conduit will be measured as one length of sub main with colour code Red Black and Green. (ii)PVC conduit and its accessories are deemed to be included in this item rates. (iii) Unit rate include for cutting chases for conduits and sinking for boxes andmaking good to wall, floors etc. |
| 31 | S&F submain wiring with two single core PVC insulated unsheathed, multistranded flexible copper conductor 1100Volts grade, FRLS type, cables 6 Sqmm drawn through in and including rigid PVC heavy duty PVC casing caping upto 32mm or PVC conduit upto 25mm on wall surface/ recessed as required at site including 6 Sqmm 1100Volts grade, FRLS type, PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals complete all as specified and directed. Note:- (i)Two runs of cables and one run of continuous earting cable and casing caping conduit will be measured as one lengt of sub main. (ii)PVC conduit casing & caping and its accessories are deemed to be included in this item rates. |
| 32 | S&Fsubmain wiring with two single core PVC insulated unsheathed, multistranded flexible copper conductor 1100Volts grade, FRLS type, cables 4 Sqmm drawn through in and including rigid PVC heavy duty PVC casing caping upto 32mm or PVC conduit upto 25mm on wall surface/ recessed as required at site including 4 Sqmm 1100Volts grade, FRLS type, PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals complete all as specified and directed. Note:- (i)Two runs of cables and one run of continuous earting cable and casing caping conduit will be measured as one lengt of sub main. (ii)PVC casing & caping/ conduit and its accessories are deemed to be included in this item rate. |
| 33 | Taking down carefully DB/ Sheet Metal Enclosure with existing MCBs complete& making good of disturb surfaces of wall/floors etc complete all as specified & directed. |
| 34 | S&F distribution board sheet metal enlosure double door shutter type factory made fixed flush with wall or outside on wall surface suitable for mounting isolators & MCB"s 415 volts, 200 Amp rated bus bar with front openable cover suitable for TP & N 4 ways all as specified & directed. |
| 35 | S&F distribution board sheet metal enlosure double door shutter type factory made fixed flush with wall or outside on wall surface suitable for mounting isolators & MCB"s 240volts, 200 Amp rated bus bar with front openable cover suitable for SP & N 4 ways complete all as specified & directed. |
| 36 | S&F distribution board sheet metal enlosure double door shutter type factory made fixed flush with wall or outside on wall surface suitable for mounting isolators & MCB"s 240volts, 200 Amp rated bus bar with front openable cover suitable for SP & N 8 ways complete all as specified & directed. |
| 37 | S&F sheet metal enclosure factory made, VTPN Vertical Distribution Boards, IP-43 & IP-44 protection suitable for MCCB"s upto 125A as as incomer, Double Door, 8 way with 250 Amps rated copper busbar complete all as specified & directed. |
| 38 | S&F sheet metal enclosure factory made, VTPN Vertical Distribution Boards, IP43 protection suitable for MCCB"s upto 125A as as incomer, Double Door, 4 way with 250 Amps rated copper busbar complete all as specified & directed. |
| 39 | S&F sheet matal encloures with plug socket single pole and neutal with two pin and earth plug and with one MCB of 20 Amps (SP) complete all as specified & directed. |
| 40 | S&F in replacement MCB, SP 5 to 32 Amp rating 240V, 10KA "C" curve complete with connection testing and commissioning complete all as specified & directed. |
| 41 | S&F in replacement MCB, SPN 32 Amp rating 240V, 10KA "C" curve complete with connection testing and commissioning complete all as specified & directed. |
| 42 | S&F in replacement MCB, SPN 40 to 63 Amp rating 240V, 10KA "C" curvecomplete with connection testing and commissioning complete all as specified & directed. |
| 43 | S&F in replacement of MCB, TP25 to 63 Amps, 415 Volts, 50 Hz with 10KA "C" curve complete with connection testing and commissioning complete all as specified & directed. |
| 44 | S&F in replacement of MCB, TPN16 to 32 Amps, 415 Volts, 50 Hz with 10 KA "C" curve complete with connection testing and commissioning complete all as specified & directed. |
| 45 | S&F in replacement of MCB, TPN40 to 100 Amps, 415 Volts, 50 Hz with 10 KA "C" curve complete with connection testing and commissioning all as specified & directed. |
| 46 | M&L in replacement of Earthing complete withgalvanised steel earth plate electrode 60cmx60cmx6 mm thickness burried directly in ground (earth pit not less than 2.25mtr deep below normal ground level) with top edge of earth plate not less than 1.5 mtr below normal ground level connected to and incl galvanised earth lead wire of 4.00mm dia by means of nuts & bolts, check nuts and washers of galvanised incl PCC pit of 1:2:4 type B-1, cover reinforced with XPMweightnot less than 4 Kg/Sqm and 6mm dia bar handle, earth pit angle iron frame of size 25mm x 25mm,excavation and earth work in anytype of soil, charcoal dust, salt, light grade GI watering pipe 20mm dia with funnel and wire -mesh and medium grade GI protection pipe of 15mm bore from top edge of earth plate upto main distribution board complete allto as shown in electrical plate No 3 of MES Sch 2009 (Part I) connected main switch board all as specified and testing on completion complete all as specified & directed. |
| 47 | S&F in replacement of modular type fan regulator,AC 230 Volts complete all as specified & directed. |
| 48 | S&F in replacement of switch modular type 6 Amps one wayAC 230 Volts. complete all as specified & directed. |
| 49 | S&F in replacement of switch modular type 16 Amps one wayAC 230 Volts complete all as specified & directed. |
| 50 | S&F in replacement of modular type bell push 6 Amps,AC 230 Volts complete all as specified & directed. |
| 51 | S&F in replacement of modular type socket 6 Amps 2/3 pin combined,AC 230 Volts complete all as specified & directed. |
| 52 | S&F in replacement of modular type socket 6/16 Amps 2/3 pin combined,AC 230 Volts complete all as specified & directed. |
| 53 | S&F in replacement ofmodular white cover plate with frame, 2 module complete all as specified & directed. |
| 54 | S&F in replacement of modular white cover plate with frame, 4 module complete all as specified & directed. |
| 55 | S&F in replacement ofmodular white cover plate with frame, 8 module complete all as specified & directed. |
| 56 | M&L in replacement submain wiringPVC insulated FRLS type, single core with stranded copper cable of size 6 Sqmm in 2 runs and 6 Sqmm one run for earth drawing through existing surface, casing/caping, recessed steel/PVC conduct complete as per site requirement including taking down existing sub main wires complete all as specified & directed. Note:- Two runs of main cable and one run of earth cable all-toghter shall be considered as one length. |
| 57 | M&L in replacement of submain wiring PVC insulated FRLS single core with stranded copper cable of size 4 Sqmm in 2 runs and 4 Sqmm one run for earth drawing through existing surface, casing/caping, recessed steel/PVC conduct complete as per site requirement including taking down existing sub main wires complete all as specified & directed. Note:- Two runs of main cable and one run of earth cable all-toghter shall be considered as one length. |
| 58 | Taking down, strip opening, cleaning all parts and packing of ceiling fan of any make and size and greasing ball bearing with specified quality grease and re-assembling theceiling fanas a one unit, complete all as specified. Note:- (i) Replacement of rewinding, painting, cable for connection etc., to be measured and paid separately under relevant items. (ii) Spares will be measured as supply only. |
| 59 | Hanging only ceiling fan in position after necessary repairs and re-commissioning the same including making electric connection complete all as specified and directed. |
| 60 | All as per Item No 58 above, but of exhaust fan any make and any size complete all as specified and directed. |
| 61 | Hanging only exhaust fan in position after necessary repairs and re-commissioning the same including making electric connection complete all as specified and directed. |
| 62 | M&L for rewinding of ceiling fan of 1200 mm size complete with super enamelled insulated copper wire of suitable size/gauge and varnishing including oiling, greasing, and replacement of old unsv or weak capacitor of suitable capacity as per manufacturer and testing complete in MES store yard all as specified and directed. Note:- The retrieved unserviceable winding wire shall be handedover to MES store and RV obtained. |
| 63 | All as per item No. 62 above, but for ceiling fan of 1400mm sweep. |
| 64 | M&L for rewinding of exhaust fan of upto 350mm sweep with super enamelled insulated copper wire of suitable size/gauge and varnishing including oiling, greasing, and replacement of old unsv or weak capacitor of suitable capacity as per manufacturer and testing complete in MES store yard all as specified and directed. Note:- The retrieved unserviceable winding wire shall be handedover to MES store and RV obtained. |
| 65 | All as per item No. 64 above, but for Exhaust fan of 380mm to 450mm sweep complete all as specified and directed. |
| 66 | M&L for rewinding of Wall/Cabin/Pedestal fans of upto 350mm sweep with super enamelled insulated copper wire of suitable size/gauge and varnishing including oiling, greasing, and replacement of old unsv capacitor of suitable capacity as per manufacturer and testing complete in MES store yard all as specified and directed.Opening and refixing of fan motor and refixing the same after necessary repair/rewinding to be done at MES store yard within quoted rate by the contractor all as specified and directed. Note:- The retrieved unserviceable winding wire shall be handedover to MES store and RV obtained. |
| 67 | All as per item No. 66 above but for Wall/Cabin/Pedestal fans of 400mm to 500mm sweep complete all as specified and directed. |
| 68 | Supply only shaft of ceiling fans including matching work for any make as per sample. |
| 69 | Supply only shaft of Exhaust fans including matching work for any make as per sample. |
| 70 | Supply only gun metal bush for fans of any make, type and size all as per sample approved. |
| 71 | Supply only ball bearing No. 6200/6201/6202 for ceiling/exhaust/Wall/ Cabin/ Pedestal fans of any size and makes all as directed of sample as approved. (Make:- NBC/SKF/HCH) |
| 72 | Supply only ball bearing of Nos. 6203/6204 for exhaust/Pedestal fans. |
| 73 | M&L for cleaning and de-scaling/greesing of exhaust fan and louvers with necessary cleaning meterials and including painting with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc as specified and directed upto connecting complete. Note:-Taking down and refixing of exhaust fan will be measured and paid sepetatly. |
| 74 | Supply only exhaust fan/Wall/Cabin/Pedestal fan blades heavy duty for exhaust fan of size upto 300mm sweep complete all as specified and directed. |
| 75 | Supply only Exhaust fan blades heavy duty of size 350mm to 400mm sweep complete all as specified and directed. |
| 76 | Supply only Exhaust fan blades heavy duty of size 450mm sweep complete all as specified and directed. |
| 77 | Supply only ceiling fan blade set of three heavy duty suitable for 1200 mm sweep including provision of fixing of screws of suitable sizecomplete all as specified and directed. |
| 78 | Supply only ceiling fan blade set of three heavy duty for size of 1400mm sweep complete all as specified and directed. |
| 79 | Supply only MS louvers suitable for exhaust fan of size upto 350mm sweep complete all as specified and directed. |
| 80 | Supply only MS louvers suitable for Exhaust fan of size above 350mm and upto 450mm sweep complete all as specified and directed. |
| 81 | Supply only PVC canopy for ceiling fan 1200/1400mm sweep for existing make and model complete all as directed and as approved. |
| 82 | Supply only rubber reel with nut, bolts, split pins etc of ceiling fan with rubber reel heavy duty for hanging fan. |
| 83 | Supply only Skackle assembly (hanging clamp set) suitable for hanging down rod of ceiling fan 1200/1400 mm sweep complete with nuts, bolts, washers and split pin complete all as specified and directed. |
| 84 | Supply only down rod with clamps etc of ceiling fan with down rod of 15mm bore medium grade GI pipe 0.30 metre long with clamps, bolts, nuts, split pins washers of suitable size of approved quality complete all as specified and directed. |
| 85 | All as per item No. 84 above, but of size 0.45m long complete all as specified and directed. |
| 86 | Supply only connector block of ceiling fan of suitable size of approved quality complete all as specified and directed. |
| 87 | Supply only capacitor suitable for ceiling fans with capacitor having capacity 2.5mfd, 240 Volts complete all as specified and directed. |
| 88 | All as per srl item No 87 above, but of capacity 3.15mfd complete all as specified and directed. |
| 89 | All as per srl item No 87 above, but of capacity 4mfd complete all as specified and directed. |
| 90 | S&F PVC Round Sheathed, FR grade, Copper Conductor (flexible) industrial cable, 1100 Volts,of size 0.5 Sqmm 3 core, complete incl taking down old unsv cable and all as specified and directed. |
| 91 | All as per srl item No 90 above but of size of size 1.5 Sqmm 3 core |
| 92 | M&L for painting of ceiling fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc complete all as specified and directed. |
| 93 | All as per item No. 92 above, but gray paint for Exhaust fan of any size and make complete all as specified and directed. |
| 94 | Taking down geyser 25/50 ltrs capacity of any make, opening up for inspection descalling by chemical treatment of internal tank, themrostat pipe, base plate assembly carrying out minor repairs including testing for water tightness and pressure and refixing in position including making electrical and water connection all as directed. |
| 95 | S&F heating element Triangle/Cup Type 1.5 KW in replacement for any make of geyser of 25 litres capacity as per site requirement and sample approved. Make : Micron/Theetha/ Standard or ISI Marked as approved. |
| 96 | All as per srl item No 95 above, but of 2.0 KW capacity Make : Micron/Theetha/ Standard or ISI Marked as approved. |
| 97 | All as per srl item No 95 above but of 3.0 KW suitable for Instant Start Geyser of 3 Ltrs cap of any type. Make : Micron/Theetha/ Standard or ISI Marked as approved. |
| 98 | S&F in replacementthermostatupto of size 9" long, autocut/push button type all as specified. Make : Micron/Theetha/ Standard or ISI Marked of approved make. |
| 99 | All as per srl item No 98 above, but of size 11" long, autocut/push button type all as specified. Make : Micron/Theetha/ Standard or ISI Marked of approved make. |
| 100 | S&F indicating lamp round /flat type as required in replacement for geyser 25/ 50 litres capacity as per sample approved. |
| 101 | S&F Non Return Valve ISI marked for geyser 25/50 litres capacity in replacement as per sample approved. |
| 102 | S&F safety plug/valve for geyser 25/50 litres capacity in replacement as per sample as per sample approved. |
| 103 | S&F 304 grade stainless steel re-inforced flexible connection pipe of size 15mm x 300 mm long complete with 2 Nos brass/CP nuts and washers etc in replacement suitable for geyser of any capacity as per sample and all as directed. Make : SHAKTI/PRAYAG/ ISI Mark as approved. |
| 104 | S&F 304 grade stainless steel re-inforced flexible connection pipe of size 15mm x 450 mm long complete with 2 Nos brass/CP nuts and washers etc in replacement suitable for geyser of any capacity as per sample and all as directed. Make : SHAKTI/PRAYAG/ ISI Mark as approved. |
| 105 | S&F base plate geyser syphon assembly set complete with inlet, outlet and thermostat pipe including rubber gasket in replacement for any make of geyser of 25 litres cap as per sample. |
| 106 | S&F base plate geyser syphon assembly set complete with inlet, outlet and thermostat pipe including rubber gasket in replacement for any make of geyser of 50 litres cap as per sample. |
| 107 | S&Fin replacement 25 Ltr inner stainless steeltank suitable for 25 Ltr storage water heater complete and all as directed. |
| 108 | S&Fin replacement 50 Ltr inner stainless steel tank suitable for 50 Ltr storage water heater complete and all as directed. |
| 109 | M&L for welding /brazingtheinner shell made out of stainless steel /copper sheet for geyser 25/35/50 ltrs capacity of any make and make the shell water tightincluding testing all as Specified and Directed. Note:- Taking down, de-scaling, replacement of rubber gasket and any minior repair involvedwill be mesured and paid seperatly. |
| 110 | S&F Rubber gasket for water heater storage type of any capacity fixed, in replacement and suitable as per the existing, complete all as specified and directed |
| 111 | S&F in replacement MS fastner bolt 8mm dia and upto 150mm long for fixing geyser/Exhaust fan with nut and washer complete. |
| 112 | M&L for replacement of outer body suitable for 25 Ltrs storage water storage heater made of MS Sheet complete with Top & Bottom Cover as per site requirement all as directed. |
| 113 | Supply andproper filling glass wool in between inner and outer tank of geyser complete all as specified and directed. |
| 114 | S&F PVC Round Sheathed, FR grade, Copper Conductor (flexible) industrial cable, 1100 Volts of size 2.5 Sqmm 3 core for connecting the geyser, complete incl taking down old unsv cable complete all as specified and directed. |
| 115 | S&F in replacement of Metra clad Socket 240 V, 20 A, 2P + E, upto of20Amps capacity of Ivory or blue cap colour complete all as specified and directed. |
| 116 | S&F in replacement of Metra clad plug top 240 V, 20 A, 2P + E, upto of 20Amps capacity of Ivory or gray colour complete all as specified and directed. |
| 117 | S&F in replacement of switch piano flush button 15 Amp single pole one way 230 volts white finish for hot water storage/geyser as per site requirement complete all as specified and directed. Make:- Anchor/Cona/Havells/Indoasian as approved. |
| 118 | S&F rigid non-metallic PVC conduit, smoke free, fire retardant, and temp stable quality of size 20mm external dia including all fixing accessories such as couplers, lock nuts, saddles, pipe hooks for securing of electric wires/cables of any type and sizeas laid on roof/ceiling or on wall surface of ISI make as approved complete all as specified and directed. |
| 119 | All as per item No. 118 above of size 25mm external dia. complete all as specified and directed. |
| 120 | M&L for point wiring in repairs complete with multistranded copper conductor 1.5 Sqmm nominal area PVC insulated FRLS 1100 volts grade electrical cable in but with through existing concealed PVC/MS conduit/Casing caping with replacement of unserviceable pressed steel terminal boxes of required size with top cover 3 mm thick plastic/laminated sheet of required color with screwed and cup washer with all accessories including 1.5 sqmm stranded copper conductor PVC unsheathed cable earth wire to common earth and connected to earth dolly for One Fan/exhaust fan point controlled by one switch 5 Amps one way using cable 1.5 Sq mm for phase and neutral and 1.5 sqmm for earthing complete all as per site requirement and as directed. |
| 121 | All as per item No 120 above, but One 3 pin 5/6 Amps, socket outlet point, independent board, for Wall/Cabin/Pedestal fan etc with cables 1.5 sq. mm size with through existing concealed PVC/MS conduit. |
| 122 | NOTES :- 1.The amount of schedule of credit shall be deducted from the total of this BOQ for arriving at contract sum. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
