Tender For Renovation, Repairing And Extension Of Lakhipur G.P. Office Building Under Chopra Dev. Block,Uttar Dinajpur Under The Fund Of 15Th F.C. 2022-2023 Fund : 15-Th F.C.-2022-23
Tender Value
18.16 Lakhs
Estimated cost
Bid Submission
15 Apr 2023
0 days left
EMD
36355
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
lakhipur → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Renovation, Repairing And Extension Of Lakhipur G.P. Office Building Under Chopra Dev. Block, Uttar Dinajpur Under The Fund Of 15Th F.C. 2022-2023 Fund : 15-Th F.C.-2022-23
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling all types of masonry excepting cement concrete plain or reinforced, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m a) In ground floor including roof. |
| 2 | b) Extra rate for each addl. Floor over the rate of ground floor1st Floor |
| 3 | Dismantling all types of plain cement concrete works, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m. In ground floor including roof a) upto 150 mm. Thick |
| 4 | c) Extra rate for each addl floor over the rate of ground floor. 1st Floor |
| 5 | Dismantling R.C. floor, roof, beams etc. Including cutting rods and removing rubbish as directed within a lead of 75 m. Including stacking of Steel bars a) In G.F. including roof |
| 6 | c) Extra rate for each addl floor over the rate of ground floor.1st Floor |
| 7 | Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 75m as directed. |
| 8 | Removal of rubbish,earth etc. from the working site and disposal of the same beyond the compound, in conformity with the Municipal / Corporation Rules for such disposal, loading into truck & cleaning the site in all respect as per direction of Engineer in charge |
| 9 | Earth workin excavation offoundation trenches or drain, in all sorts of soils (including mixed soil but excluding laterite or sand stone) including removing, spreading or stacking the spoils within a lead of75m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete.Depth of excavation not exceeding 1500mm. |
| 10 | Earth work in filling in foundation trenches or plinth with good earth in layers not exceeding 150mm including watering and ramming etc. layer by layer complete. a) With earth obtain from excavation of foundation. |
| 11 | b) With carried earth, arranged by the contractor within a radius of 1 km. including cost of earth. |
| 12 | Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand. |
| 13 | Cement concrete with 30 mm down graded shingles excluding shuttering.N.B. Variety.In ground floor, 6 : 3 : 1proportion. |
| 14 | Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes(b) Pakur Variety Stone Chips |
| 15 | Brick work with 1st. class Bricks in cement mortar(6:1), In foundation & plinth |
| 16 | 125mm. thick Brick work with 1st. class bricks in cement mortar (4:1)in G.F. |
| 17 | 125mm. thick Brick work with 1st. class bricks in cement mortar (4:1)at 1st Floor |
| 18 | Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes , Pakur Variety stone aggregatea) In Ground Floor |
| 19 | Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes , Pakur Variety stone aggregatea) In Ground Floor at 1st. Floor |
| 20 | Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc. including supply of rods, initial straightening and removal of loose rust(if necessary)cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction.Tor steel / Mild steel, Other thanSAIL / TATA / RINL, a) in Ground Floor |
| 21 | Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc. including supply of rods, initial straightening and removal of loose rust(if necessary)cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction.Tor steel / Mild steel, Other thanSAIL / TATA / RINL,at 1st. Floor |
| 22 | Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor)a) 25 mm to 30 mm shuttering without staging in foundation |
| 23 | 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-In-Charge.in Ground Floor |
| 24 | 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-In-Charge. at 1st. Floor |
| 25 | M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor. Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr |
| 26 | Providing and fixing factory made door frame (single rebate) made of single piece extruded solid PVC profile with homogenous fine cellular structure having smooth outer integral skin having 62mm width x 32 mm thickness (the door frame is to be made with single piece extruded solid pvc profile whereas no sheet pasted profile shall be applied for door frame fabrication) and shall be fixed to wall as per instructions of Engineer – in – charge using 100 x 8 sheet metal CSK screws. |
| 27 | Supplying, Fitting & Fixing 30 mm thick both side prelaminated Factory made solid Panel PVC Door Shutter consisting of outer frame made out of M.S. tubes of 19 gauge thickness and size 19 mmx19 mm for styles, top and bottom rails, M.S. frame shall have cost of steel primers of approved make and manufacture, M.S. frame covered with 5 mm th. heat moulded PVC “C” channel of size 30 mm th, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on either sides forming styles; and 5 mm th. 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm tapered in 45 degree on the inner side to form top & bottom rail and 115 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided either side of the panel with 10 mm (5mmx2) th.,20 mm wide cross PVC sheet as gap insert for top rail and bottom rail sheet to be fitted in the M.S. frame welded/sealed to the styles &rails with 7 mm (5mm+2 mm) th.x15 mm wide PVC sheet beading on inner side and joined together with solvent cement adhesive. An additional 5 mm th. PVC strip of 20 mm which is to be stuck on the interior side of the “C” channel using PVC solvent adhesive etc. complete excluding all necessary hardwares as per direction of Engineer-in-Charge. |
| 28 | Supplying, fitting and fixing windows and ventilators with or without integrated grills conforming to IS 1038-1975 and manufactured from rolled steel sections conforming to IS 7452-1974 with non-friction projecting type, box type hinges, glazing clips, lugs locking bracket, handle plate etc, including hoisting in position, straightening if required, fixing lugs in cement concrete (1:2:4) with stone chips 20 mm down cutting holes and mending good damages to match with existing surface complete in all respect excluding glazing. A)Operable steel doors & windows as per I.S. sizes with side hung shutters and horizontal glazing bars, with or without fixed type ventilators.(the rate admissible for the operable portion only) a) Ground Floor |
| 29 | A)Operable steel doors & windows as per I.S. sizes with side hung shutters and horizontal glazing bars, with or without fixed type ventilators.(the rate admissible for the operable portion only) a) at 1st Floor |
| 30 | B) With integrated grills - In all floors. M.S instigated grill as per approved design instigated with steel window or ventilator joints continuously welded with M.S flats and burs. |
| 31 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] a) With 1:4 cement mortar. 10mm.thick plaster at Ground Floor |
| 32 | a) With 1:4 cement mortar. 10mm.thick plaster at 1st Floor |
| 33 | b) With 1:6 cement mortar.,15mm.thick plasterin Ground Floor |
| 34 | b) With 1:6 cement mortar.,15mm.thick plaster at 1st Floor |
| 35 | c) With 1:6 cement mortar., 20mm.thick plasterin Ground Floor |
| 36 | c) With 1:6 cement mortar., 20mm.thick plasterin 1stFloor |
| 37 | Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc.(A) FloorWith Sand Cement Mortar (1:4) 20 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m, b) Area of each tile above 0.09 Sq.m(ii) Other than Coloured decorative including whiteA) In Ground Floor |
| 38 | (A) FloorWith Sand Cement Mortar (1:4) 20 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m, b) Area of each tile above 0.09 Sq.m(ii) Other than Coloured decorative including whiteA) In 1stFloor |
| 39 | N) IN WALL With Sand Cement Mortar (1:3) 15 mm thick & 2 mm thickcement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m. (a) Area of each tile upto 0.09 Sq.m(ii) Other than Coloured decorative including whitea) In ground Floor |
| 40 | N) IN WALL With Sand Cement Mortar (1:3) 15 mm thick & 2 mm thickcement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m. (a) Area of each tile upto 0.09 Sq.m(ii) Other than Coloured decorative including whitea) In 1st Floor |
| 41 | Neat cement punning 1.5 mm thick in wall, dado, window sills, floors, drains etc. using cement @ 0.152cum./100sqm. |
| 42 | Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. |
| 43 | Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved quality putty on the surface of necessity. On Steel or metal Surface. with super gloss ( hi-gloss ), Two coatwith any shed except white. |
| 44 | Applying decorative cement base paint ofapproved quality after preparing the surface including scraping the same thoroughly ( plastered or concrete surface ) as per manufacturers specification. In ground floor. Two coats. |
| 45 | Cost of Sanitary Plumbing Works |
| 46 | AddGST@ 18.00% on above = |
| 47 | [email protected]% on above = |
AI Tender Summary
Tender Timeline
Apr 07, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedApr 15, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedApr 17, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender