Military Engineer Services-MES has published Tender For Repair To Compound Wall Steel Gate And Fencing In Otm Accn Area Under Ge South Patiala. Submission Date for this Tender is 02-05-2023. Wall construction Tenders in patiala Punjab. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 25-Apr-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 02-05-2023 |
| Sl. No. | Item Description |
| 1 | Demolitionof Brick work including all quoains and arches, pillars etc built in cement mortar complete all as specified and as directed by Engineer-in-charge. |
| 2 | M&L for Brick work using sub class B old size bricks built in cement mortar 1:6 straight or curved on plan exceeding 6 m mean radiuscomplete all as specified and as directed by Engineer-in-charge. |
| 3 | M&L for Brick work using sub class B old size bricks built in cement mortar 1:6 straight or curved on plan exceeding 6 m mean radius (Except bricks )complete all as specified and as directed by Engineer-in-charge. |
| 4 | M&L for Cement concrete 1:2:4 type B-1 using 20 mm graded crushed stone aggregate as in copings, kerbs, bed plates etc., with slightly rounded or chamferred angles & throating complete all as specified and as directed by Engineer-in-charge. |
| 5 | Taking down cement plaster from brick walls of any description, racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed by Engineer-in-charge. |
| 6 | M&L for Rendering 15mm thick cement plaster in CM 1:4 onbrick walls or concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-charge. |
| 7 | M&L for Applying 02 coats of exterior emulsion paint (light shade) @ 5 sq.m/litre/2 coats by using roller to external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc surfaces over & including a coat of exterior wall primer @ 11 sq.m/litre/1 coat as recommended for under coat by manufacturer of exterior emulsionincldg. prepration ofOLD /NEWsurfaces complete all as specified and as directed by Engineer-in-charge. |
| 8 | M&L for 75mm thick Cement concrete 1:4:8 type D-2 using 40 mm stone aggregate as in foundations, fillings and mass concrete or sub base under floors complete all as specified and as directed by Engineer-in-charge. |
| 9 | M&L for 10mm coloured paver tiles (endeura Tiles) of size 300 x 300mm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 20mm thick screed bed in CM 1:4 fixed in repairs complete all as specified and as directed by Engineer-in-charge. |
| 10 | M&L for Cement concrete 50mm thick 1:2:4 type B-1using 20mm graded crushedstone aggregate as in floors pavings etc finished even and smooth without using extra cementcomplete all as specified and as directed by Engineer-in-charge. |
| 11 | Excavating in post holes (or similar holes) in soft / loose soil each not exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, removing surplus soil to a distance not exc 50 m and making good surface complete all as specified and as directed by Engineer-in-charge. |
| 12 | Demolition posts or struts (wood, steel or R.C.C.) any section,including taking out embedded portion (posts embedded in natural ground or hard core) and making good disturbed ground complete all as specified and as directed by Engineer-in-charge. |
| 13 | M&L for Cement concrete 1:3:6 type C-2using 40mm graded crushedstone aggregate as in foundation, filling and mass complete all as specified and as directed by Engineer-in-charge. |
| 14 | M&L for Mild steel work as in posts and struts in fencing and ladder/ stair including cutting tops to shape as directed, drilling holes, notching for wire, etc.; inclflat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work erected and fixed in position or embedding in PCC complete conforming to Fe-290 Gde E-165 complete all as specified and as directed by Engineer-in-charge. |
| 15 | M&L for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and as directed by Engineer-in-charge. |
| 16 | Demolition old plain/ barbed wire as in fencing of any description and in any position any dia complete all as specified and as directed by Engineer-in-charge. |
| 17 | S&F Chainlink fencing 4 mm dia galvanised steel wire 100X100 mm mesh made up into mattresses or cages, lapped wired and laid in postion including closing after fillingfixed in repairscomplete all as specified and as directed by Engineer-in-charge. |
| 18 | M&L for Plain mild steel wire 4mm dia, galvanised class 3, in fencing including straining and fixing to wood, concrete or steel posts and/or to straining bolts, including securing with and provision of galvanised iron tying wire, galvanised iron staples or steel pins, etc. as directed (each line of wire to be measured) complete all as specified and as directed by Engineer-in-charge. |
| 19 | Preparing ends of steel postsas in fencing and treated with coal tar or coal tar black paint area tarred exc 0.10 Sqm but not exc0.50 Sqm eachM&L complete all as specified and as directed by Engineer-in-charge. |
| 20 | Preparing new or previously untreated surfaces of steel and iron work of any description not otherwise described over 10cm width or girth and M&L for applying two coats of synthetic enamel paint over one coat of red oxide primercomplete all as specified and as directed by Engineer-in-charge. |
| 21 | M&L Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends, each screwed end to be fitted with washer and one hexagonal or square nut, 5 to 10mm diameter of neck, not exceeding 5cm longcomplete all as specified and as directed by Engineer-in-charge. |
| 22 | M&L for MS round bars 10mm dia line wire for fixing of chain link fencing, cut to length, bent to shape required, including cranking, bending and binding, complete all as specified and as directed by Engineer-in-charge. |
| 23 | M&L for Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and as directed by Engineer-in-charge. |
| 24 | M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of graniteincdg. backing layer of 10mm thick 1:4 incldg roghening plastered or concrete surfaces for providing key for fixing of granite complete all as specified and as directed by Engineer-in-charge. |
| 25 | Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed by Engineer-in-charge. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
