Directorate Of Municipal Administration-DMA has published Tender For Supplying Required Electrical Materials And Doing Essential Electrical Work Under Municipal Council Hinganghat 2Nd Call.. Submission Date for this Tender is 13-04-2023. Absorbents Tenders in hinganghat Maharashtra. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Supplying & erecting H.M.S. P.V.C. conduit 20 mm. dia. with necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC. |
| 2 | Supplying & laying HMS PVC conduit 20 mm dia. With necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC. |
| 3 | Supplying & erecting HMS P.V.C. conduit 25 mm. dia. With necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC. |
| 4 | Supplying & laying HMS PVC conduit 25 mm dia with necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC. |
| 5 | Supplying and erecting UPVC reinforced flexible conduit 20 mm in dia. conforming to I.S. with required number of couplings, PVC bushes, check nuts etc. complete. |
| 6 | Supplying and erecting UPVC reinforced flexible conduit 25 mm in dia. conforming to I.S. with required number of couplings, PVC bushes, check nuts etc. complete. |
| 7 | Supplying and erecting HMS PVC conduit 20 mm dia. with PVC accessories on wall / ceiling as per specification No: WG-MA/CON. |
| 8 | Supplying and erecting HMS PVC conduit 25 mm dia. with PVC accessories on wall /ceiling as per specification No: WG-MA/CON. |
| 9 | Supplying and erecting PVC trunking (PVC casing-ncapping) of size 20 mm with accessories on wall/ceiling as per specification No: WG-MA/CON. |
| 10 | Supplying and erecting PVC trunking (PVC casing-ncapping) of size 25 mm with accessories on wall/ceiling as per specification No: WG-MA/CON. |
| 11 | Supplying & erecting mains with 2x1.5 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WGMA/BW |
| 12 | Supplying & erecting mains with 2x2.5 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WGMA/BW |
| 13 | Supplying & erecting mains with 2x4 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WGMA/BW |
| 14 | Supplying & erecting mains with 2x6 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WGMA/BW |
| 15 | Supplying & erecting mains with 2x10 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WGMA/BW |
| 16 | Supplying & erecting mains with 3x2.5 Sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WGMA/ BW |
| 17 | Supplying & erecting mains with 3x4 sq.mm FR copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WGMA/BW |
| 18 | Supplying & erecting mains with 3x6 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WGMA/BW |
| 19 | Supplying & erecting mains with 3x10 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WGMA/BW |
| 20 | Supplying & erecting mains with 4x16 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WGMA/BW |
| 21 | Supplying and erecting PVC insulated PVC round sheathed 2.5 sq.mm (50 no. x 0.25 mm dia.) 3 core flexible multi stranded copper Industrial cable for voltage grade up to 1.1 kV |
| 22 | Supplying and erecting Ceiling rose / Batten holder /Slanting holder / hanging cord switch / hanging bell push/ pendent holder bakelite base 6A. erected on filledpolypropylene board or polished double wooden block/ PVCjunction box. |
| 23 | Supplying and erecting ISI mark modular type switch 6A / 10A duly erected on provided plate and box with wiring connections complete. |
| 24 | Supplying and erecting ISI mark modular type switch 16A duly erected on provided plate and box with wiring connections complete. |
| 25 | Supplying and erecting ISI mark modular type switch 16 / 20 A with indicator, duly erected on provided plate and box with wiring connections complete. |
| 26 | Supplying and erecting ISI mark modular type D.P. switch 32A with indicator, duly erected on provided plate and box with wiring connections complete. |
| 27 | Supplying and erecting ISI mark modular type 3 pin 6A multi sockets with safety shutter, duly erected on provided plate and box with wiring connections complete. |
| 28 | Supplying and erecting ISI mark modular type 3 pin 6 / 16A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete. |
| 29 | Supplying and erecting ISI mark modular type (two module) electronic step regulator for fan, duly erected on provided plate and box with wiring connections complete. |
| 30 | Supplying and erecting ISI mark modular type blanking plate one module, duly erected on provided plate & box. |
| 31 | Supplying and erecting ISI mark modular type blanking plate two module, duly erected on provided plate & box. |
| 32 | Supplying and erecting PVC Surface modular switch box with double mounting plate for 2 modules duly erected. |
| 33 | Supplying and erecting PVC Surface modular switch box with double mounting plate for 3 modules duly erected. |
| 34 | Supplying and erecting PVC Surface modular switch box with double mounting plate for 4 modules duly erected. |
| 35 | Supplying and erecting PVC Surface modular switch box with double mounting plate for 6 modules duly erected. |
| 36 | Supplying and erecting PVC Surface modular switch box with double mounting & front plate for 8 modules complete duly connected. |
| 37 | Supplying and erecting PVC Surface modular switch box with double mounting plate for 12 modules duly erected. |
| 38 | Supplying and erecting PVC Surface modular switch box with double mounting plate for 16 / 18 module duly erected. |
| 39 | Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 12 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background. |
| 40 | Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 16 / 18 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background. |
| 41 | Supplying and erecting 16 / 20 / 25 A starter (modular range) 2 module for AC unit on provided box complete & duly concealed with necessary material and connected. |
| 42 | Supplying and erecting ISI mark modular type 5 pin socket with safety shutters 3 module socket 6A 240V AC supply, duly erected on provided plate and box with wiring connections complete duly erected. |
| 43 | Point wiring for light/fan/bell in 20 mm ISI marked HMS PVC conduit with 1.5 sq.mm (2+1E) FR grade copper wire, flush type switch, earthing and required accessories as per specification No: WG-PW/SW |
| 44 | Point wiring for independent plug in 20 mm ISI marked HMS PVC conduit with 1.5 sq.mm (2+1E) FR grade copper wire, flush type switch, earthing and required accessories as per specification No: WG-PW/SW |
| 45 | Point wiring for light/fan/bell concealed type in min 20 mm ISI marked HMS PVC conduit with 1.5 sq.mm. (2+1E) FR grade copper wires, modular type switch, earthing and required accessories as per specification No: WG-PW/CW |
| 46 | Point wiring for independent plug, concealed type in min 20 mm ISI marked HMS PVC conduit with 1.5 sq.mm (2+1E) FR grade copper wires, modular type switch and socket, earthing and required accessories as per specification No WG-PW/SW |
| 47 | Wiring for plug on board with Switch socket, copper wiring and earthing as per specification No: WG-PW/SW |
| 48 | Point wiring in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FR grade copper wire, flush type switch, earthing and required accessories as per specification No: WGPW/SW |
| 49 | Point wiring for independent plug in PVC trunking (casingcapping) with 1.5 sq.mm (2+1E) FR grade copper wire with flush type switch and required accessories as per specification No: WG-PW/SW |
| 50 | Point wiring in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FR grade copper wire, modular type switch, earthing and required accessories as per specification No:WG-PW/SW |
| 51 | Point wiring for independent plug in PVC trunking (casingcapping) with 1.5 sq.mm (2+1E ) FR grade copper wire, modular type switch, earthing and required accessories as per specification No: WG-PW/SW |
| 52 | Point wiring in ISI mark HMS PVC conduit with 1.5 sq.mm (2+1E) FR grade copper wire, modular type switch, earthing and required accessories as per specification No: WGPW/SW |
| 53 | Point wiring for independent plug in ISI mark HMS PVC conduit with 1.5 sq.mm (2+1E )FR grade copper wire, modular type switch, earthing and required accessories as per specification No: WG-PW/SW |
| 54 | Supplying & installing UTP networking cat-6 cable suitable for LAN / WAN Computer net-working as per specification No WG-COC/NC |
| 55 | Dismantling the existing light, fan, bell, clock, independent plug point, wiring including circuit mains of all types along with accessories etc. complete as per specification No: WG-DM/PW |
| 56 | Dismantling the existing aluminium /copper mains, submains wiring upto 10 sq.mm. along with accessories etc complete as per specification No: WG-DM/PW |
| 57 | Supplying and erecting LED square / circular 9 to 12W down lighter having pressure die-cast aluminium housing, opal translucent cover, mounting arrangement with board for surface type or spring loaded mounting clips for flushtype complete. |
| 58 | Supplying and erecting LED square / circular 13 to 15W down lighter having pressure die-cast aluminum housing, opal translucent cover, mounting arrangement with board for surface type or spring loaded mounting clips for flushtype complete. |
| 59 | Supplying and erecting square / round shaped CRCA /diecast aluminium powder coated housing LED panel (slim edge-lit) light suitable for 13W to18W with provision for plane front frame with translucent cover fixed to the housing complete. |
| 60 | Supplying and erecting CRCA /die-cast aluminium powder coated housing LED panel light (slim edge-lit) square / round shape suitable for 19 to 24 W with provision for plane front frame with translucent cover fixed to the housing complete. |
| 61 | Supplying and erecting LED flexible strip light 5m length upto 25W conforming IP 65 of any colour with driver complete. |
| 62 | Supplying & erecting LED 18W tube light fitting (4 feet) with polycarbonate housing, heat sink, integrated HF electronic driver complete. |
| 63 | Supplying & erecting LED 20W tube light fitting (4 feet) with aluminium housing, heat sink, integrated HF electronic driver complete. |
| 64 | Supplying and erecting Electronic Type cordless call bell erected on T.W. board having portable bell push working on 9V D.C. battery and (effective range upto 45 meter) bell on 250 V A.C. supply. |
| 65 | Supplying and erecting electronic type driver for indoor LED upto 19W-24W fixtures suitable to operate on 230V A.C. 50 Hz. Having pf>0.95 and THD<10%. |
| 66 | Supplying and erecting LED Street light fitting suitable for above 40W to 48W lamp, including lamp, with PF > 0.95 class IP 65 and above housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete per specification No . FG-ODF/FLS2. |
| 67 | Supplying and erecting LED Flood light fitting of 50W, including lamp, with PF > 0.95,class IP 65 and above class IP 65 and above housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete per specification No FG-ODF/FLS-2 |
| 68 | Supplying and erecting Recess mounted 20W LED wall washers, tilted 70° outwards and swivels 360° to offer best illumination on the wall with any colour with driver complete. ( Including Compatible Driver) |
| 69 | Supplying & erecting 20W LED PAR (30 Lamp E-27 Base, SPOTO series) lights by making necessary arrangement/recess in wall to make it flush with surface. |
| 70 | Supplying and erecting cylindrical shaped integral decorative with high power 12W-16W LED bollard upto 1000mm with opal acrylic diffuser and IP65 protection on provided foundation complete. |
| 71 | Supplying and erecting mushroom shaped integral 12W-16W LED decorative bollard upto 680mm with IP65 protection on provided foundation complete. |
| 72 | Erecting the departmentally supplied WP LED street light / flood light fitting upto 80W. |
| 73 | Erecting departmentally supplied LED street light/ flood light Fitting upto 150W . |
| 74 | Erecting departmentally supplied LED street light/ flood light Fitting upto 400W . |
| 75 | Supplying and erecting street light Wall bracket made from 25 mm. dia ‘B’ class G.I. pipe 1.2 m in total length complete as per specification no. FG-BKT/WB |
| 76 | maintenance of non eesl Led Light of all wattages of approximately 500 quantity |
| 77 | Maintenance of55 nos of Street light Switiching box |
| 78 | Supplying & erecting 5W-7W, 230V integral type LED Lamp suitable for B-22/E-27 base. |
| 79 | Supplying & erecting 10-12W, 230V integral type LED Lamp suitable for B-22/E-27 base. |
| 80 | Supplying and erecting regular/ standard model ceiling fan of 1400mm. sweep complete erected in position as per specification no. FG-FN/CF |
| 81 | Supplying pedestal type air circulator 450 mm. sweep oscillating type suitable to work on 230 Volts 50 cycles 1440 RPM with speed regulator, overhead protection unit, totally enclosed, flame proof motor with additional 3 core wire, 5 metre length and hand shield type 3 pin 5A. plug top complete with moisture proof treatment and ‘E’ class insulation. |
| 82 | Supplying pedestal type air circulator 600 mm. sweep oscillating type suitable to work on 230 Volts 50 cycles 1440 RPM with speed regulator, overhead protection unit, totally enclosed, flame proof motor with additional 3 core wire, 5 metre length and hand shield type 3 pin6A. plug top complete with moisture proof treatment and ‘E’ class insulation. |
| 83 | Supplying and erecting fresh air cum exhaust fan of light duty250 V A.C. 50 cycles 225mm. 1400 RPM rust proof body & blades, wire mesh, duly erected in an approved manner. |
| 84 | Supplying and erecting fresh air cum exhaust fan of light duty 250 V A.C. 50 cycles 300mm. 1400 RPM rust proof body & blades, wire mesh, duly erected in an approved manner. |
| 85 | Supplying and erecting five star rated energy saving Ceiling fan 230 V A.C. 50 cycles 1200 mm complete erected in position as per specification no. FG-FN/CF |
| 86 | Supplying and erecting condenser 2.5 micro farad for ceiling fan |
| 87 | Supplying & fixing anchor type fastener fan hook, with 2 nos. of 10 mm dia x 75 mm long with necessary materials for ceiling fan. |
| 88 | Providing recess in brick wall suitable forerection of exhaust fan up to 450 mm sweep complete with grouting of nut, bolts, plaster in hand colour washing to match the colour of the wall for the wall thickness of 150 mm. |
| 89 | Providing recess in brick wall suitable forerection of exhaust fan up to 450mm. sweep complete with grouting of nut, bolts, plastering and colour washing to match the colour of the wall for the wall thickness of 225 mm. |
| 90 | Supplying & erecting 22 SWG G.I sheet metal cawl sector shaped with 25 x 25 x 3 (mm) angle iron frame, metal mesh to avoid birds entry with necessary material, suitable for exhaust fan of 300 mm as per specification no FG-FAS/MSC |
| 91 | Dismantling the existing ceiling fan /exhaust fan / cabin fan / bracket fan complete with accessories, G.I. down rod, frame etc. and making the site clear. |
| 92 | Providing fully comprehensive annual maintenance service for 80/120/150 ltr. water cooler unit complete as per terms and conditions. Job includes 1) quarterly servicing 2) on call repair 3) replacement of all spares including minor electrical parts within 48 hours. 4) refrigerant charging if required. 5) if failed to rectify the fault within 48 hrs penalty shall be charged Rs.50/- per day.The job exclude sheet metal work and plastic material. |
| 93 | Providing servicing of 1/1.5/2/3 TR capacity split/window air conditioning unit complete with all necessary material. Job includes checking of performance of unit, cleaning of filters of indoor unit, cleaning of outdoor unit with blower, checking of electrical connection of indoor as well as outdoor unit and submitting report to Engineer incharge. |
| 94 | Providing annual comprehensive maintenance contract for 1.5 TR split/window air conditioning unit complete as per terms and conditions. Job includes 1) quarterly servicing 2) on call repair 3) replacement of all spares within 24 hours 4) sending standby manpower for VIP movement. The job exclude sheet metal work and plastic material. |
| 95 | Providing annual comprehensive maintenance contract for 2 TR split/window air conditioning unit complete as per terms and conditions. Job includes 1) quarterly servicing 2) on call repair 3) replacement of all spares within 24 hours 4) sending standby manpower for VIP movement. The job exclude sheet metal work and plastic material. |
| 96 | Providing replacement of existing unservicable rotary/scroll compressor of air conditioner 1.5 TR by new one of same capacity with guarantee for one year with provided refrigerant complete. |
| 97 | Providing replacement of existing unservicable rotary/scroll compressor of air conditioner 2 TR by new one of same capacity with guarantee for one year with provided refrigerant complete. |
| 98 | Providing replacement of unserviceable starting capacitor for A/C unit. |
| 99 | Providing replacement of unserviceable running capacitor for A/C unit. |
| 100 | Providing replacement of unserviceable fan motor capacitor for A/C unit. |
| 101 | Providing replacement of unserviceable PCB for A/C unit upto 3 TR capacity. |
| 102 | Providing repair of of faulty PCB for air conditioning unit upto 3 TR capacity. |
| 103 | Supplying and installing of new fan motor for condenser for air conditioning unit |
| 104 | Providing vaccumising the airconditioner system and charging with R-22 refrigerant for air conditioning unit. |
| 105 | Providing vaccumising the airconditioner system to 200 micron and charging with R-22 refrigerant for 1.5TR window/split air conditioning unit. |
| 106 | Providing vaccumising the airconditioner system to 200 micron and charging with R-22 refrigerant for 2TR window/split air conditioning unit. |
| 107 | Providing replacement of existing unserviceable compressor of 150 litre cooling capacity water cooler by new one of same capacity alongwith suitable refrigerent with guarantee for one year. |
| 108 | Providing replacement of existing unserviceable condensor coil of 40/80/150 litre cooling capacity water cooler by new one of same capacity, testing to the satisfaction of site engineer for cooling and along with guarantee for one year with suitable refrigerant. |
| 109 | Providing replacement of existing unserviceable SS water tap of 40/80/150 litre cooling capacity water cooler by new one of same capacity, testing to the satisfaction of site engineer for cooling and along with guarantee for one year with suitable refrigerant. |
| 110 | Providing replacement of existing unserviceable relay 40/80/150 litre cooling capacity water cooler by new one of same capacity, testing to the satisfaction of site engineer for cooling and alongwith guarantee for one year with suitable refrigerant. |
| 111 | Providing replacement of existing unserviceable thermostat of 40/80/150 litre cooling capacity water cooler by new one of same capacity, testing to the satisfaction of site engineer for cooling and alongwith guarantee for one year with suitable refrigerant. |
| 112 | Dismantling the existing split type air conditionerof any type and capacity safely without any damages and making the site clear. |
| 113 | Supplying and erecting double pole metal clad switch with HC type fuse and neutral link 240V, 32A on iron / GI frame as per specification no. SW-SWR/MDP . |
| 114 | Supplying and erecting double pole metal clad switch with HC type fuse 240V,63A on iron / GI frame as per specification no. SW-SWR/MDP. |
| 115 | Supplying and erecting triple pole metal clad switch and fuse 415V, 63A on angle iron / GI frame as per specification no. SW-SWR/MTP. |
| 116 | Supplying and erecting triple pole metal clad switch and fuse 415V, 100A on angle iron / GI frame as per specification no. SW-SWR/MTP. |
| 117 | Supplying and erecting triple pole metal clad rewireable fuse switch 415V, 200A on angle iron /GI frame as per specification no. SW-SWR / MTP. |
| 118 | Supplying and erecting four pole metal clad ON LOAD change over switch 415V,100A erected on angle iron /GI frame complete. |
| 119 | Supplying and erecting four pole metal clad ON LOAD change over switch 415V, 200A erected on angle iron /GI frame approved make complete. |
| 120 | Supplying and erecting metal clad distribution board 240V, 8 way, 16A per way & neutral bar connector complete erected on iron / GI frame as per specification no. SWSWR/ MDB |
| 121 | Supplying and erecting metal clad distribution board 240V, 6 way, 16A per way & neutral bar connector complete erected on iron / GI frame as per specification no. SWSWR/ MDB |
| 122 | Supplying and erecting metal clad distribution board 240V, 4 way, 16A per way & neutral bar connector complete erected on iron /GI frame as per specification No. SWSWR/ MDB |
| 123 | Supplying and erecting metal clad distribution board 415 V, 8 way, 32A. per way & neutral bar connector complete erected on iron / GI frame as per specification no. SWSWR/ MDB |
| 124 | Supplying, erecting & marking SPMCB 6A to 32A, B- series (for lighting) in provided distribution board as per specification no. SW-SWR/MCB |
| 125 | Supplying, erecting & marking DPMCB 6 A to 32 A B- series (for lighting) in provided distribution board as per specification no. SW-SWR/MCB |
| 126 | Supplying, erecting & marking SPN MCB 6A to 32A, Bseries (for lighting) in provided distribution board as per specification no. SW-SWR/MCB |
| 127 | Supplying, erecting & marking TPMCB 6 A to 32A in provided distribution board as per specification no. SWSWR/ MCB |
| 128 | Supplying, erecting & marking FPMCB 6A to 32A in provided distribution board as per specification no. SW-SWR/MCB |
| 129 | Supplying, erecting & marking TPMCB 40A to 63A in provided distribution board as per specification no. SWSWR/ MCB |
| 130 | Supplying, erecting & marking FPMCB 40A to 63A in provided distribution board as per specification no. SWSWR/ MCB |
| 131 | Supplying, erecting & marking TPN MCB 6A to 32A, C series in provided distribution board as per specification no. SW-SWR/MCB |
| 132 | Supplying, erecting & marking TPN MCB 40A to 63A, C series in provided distribution board asper specification no. SW-SWR/MCB |
| 133 | Supplying erecting and marking double pole isolator only switch version of miniature circuit breaker of 40A with required wiring connections and lugs etc. in provided distribution board complete. |
| 134 | Supplying erecting and marking triple pole isolators only switch version of miniature circuit breaker of 40A with required wiring connections and lugs etc. in provided distribution board complete. |
| 135 | Supplying erecting and marking triple pole isolators only switch version of miniature circuit breaker of 63A with required wiring connections and lugs etc. in provided distribution board complete. |
| 136 | Supplying erecting and marking triple pole isolators only switch version of miniature circuit breaker of 100A with required wiringconnections and lugs etc. in provided distribution board complete. |
| 137 | Supplying erecting and marking four pole isolators only switch version of miniature circuit breakers of 40A in provided distribution board complete. |
| 138 | Supplying erecting and marking four pole isolators only switch version of miniature circuit breakers of 63A in provided distribution board complete. |
| 139 | Supplying erecting and marking four pole isolators only switch version of miniature circuit breakers of 80/100A in provided distribution board complete. |
| 140 | Supplying and erecting triple pole and neutral distribution board (TPNDB) surface/ flushmounted suitable for SPMCB of 12 poles on iron / GI frame (horizontal busbar type) as per specification no. SWSWR/ MCBDB |
| 141 | Supplying and erecting single pole and neutral distribution board (SPNDB) surface/flush mounted with 2 poles for incoming and 6 poles for outgoing SP MCB’s on iron/ GI frame as per specification no. SW-SWR/MCBDB |
| 142 | Supplying and erecting single pole and neutral distribution board (SPNDB) surface/flush mounted with 2 poles for incoming and 10 poles for outgoing SP MCB’s on iron/ GI frame as per specification no. SW-SWR/MCBDB |
| 143 | Supplying and erecting single pole and neutral distribution board (SPNDB) with door surface/flush mounted with 2 poles for incoming and 6 poles for outgoing SP MCB’s on iron/ GI frame as per specification no. SWSWR/MCBDB |
| 144 | Supplying and erecting single pole and neutral distribution board (SPNDB) with door surface/flush mounted with 2 poles for incoming and 10 poles for outgoing SP MCB’s on iron/ GI frame as per specification no. SWSWR/ MCBDB |
| 145 | Supplying & erecting original 1.25 mm CRCA sheet metal enclosures with 20A. 2 pin plug & earth socket and 20A. 3 pin plug top with 20A/30A single pole MCB complete erected on angle iron/ GI frame. |
| 146 | Supplying and erecting blanking plate of suitable size on MCB DB complete. |
| 147 | Providing, erecting and commissioning 2 pole RCCB only of electromagnetic type with 30/100/300 mA sensitivity and having capacity of 16/ 25A complete as per specification no. SW-RCCB/RCCB |
| 148 | Providing, erecting and commissioning 2 pole RCCB only of electromagnetic type with 30/100/300 mA sensitivity and having capacity of 40A complete as per specification no. SWRCCB/RCCB |
| 149 | Providing, erecting and commissioning 4 pole RCCB only of electromagnetic type with 30/100/300 mA sensitivity and having capacity of 40A complete as per specification no. SWRCCB/ RCCB |
| 150 | Providing, erecting & commissioning 4 pole RCCB of electromagnetic type with 30/100/300 mA sensitivity and having capacity of 100A, complete as per specification no. SW-RCCB/RCCB |
| 151 | Supplying & fixing CRCA sheet Box with earthing terminals for housing 2 Pole RCCB on iron frame/laminated board complete. |
| 152 | Supplying & fixing CRCA sheet Box with earthing terminals for housing 4 Pole RCCB on iron frame/laminated board complete. |
| 153 | Supplying and erecting metal work in CRCA sheet with fabrication of boxes, panel boards, etc. including cutting, bending, drilling, welding, riveting, treated with anti-rust treatment and duly powder coated or painted with one coat of red lead paint and 2 coats of enamel paint complete. |
| 154 | Supplying and erecting GI sheet 1.25 mm (18 SWG) to be used for fabrication of boxes panel boards etc. including cutting, bending, drilling, welding, riveting etc. and painting with one coat of red lead paint and 2 coats of enamel paint. |
| 155 | Supplying and erecting plywood 6 mm thick fixed to wall or on provided panel board with necessary materials such as screws, wall fasteners supports, nuts bolts etc. complete. |
| 156 | Supplying and erecting plywood 12 mm thick fixed to wall or on provided panel board with necessary materials such as screws, wall fasteners supports, nuts bolts etc. complete. |
| 157 | Supplying and erecting GI sheet 1.6 mm (16 SWG) caution board of size 200 x 150 mm duly painted with red oxide and enamel paint in Marathi and Hindi erected at position for medium voltage installation. |
| 158 | Supplying and erecting iron, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority. |
| 159 | Supplying, erecting & terminating XLPE armoured cable 2 core 10 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL |
| 160 | Supplying, erecting & terminating XLPE armoured cable 3 core 10 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL |
| 161 | Supplying, erecting & terminating XLPE armoured cable 3 core 25 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL |
| 162 | Supplying, erecting & terminating XLPE armoured cable 3 core 50 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL |
| 163 | Supplying, erecting & terminating XLPE armoured cable 3½ core 25 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL |
| 164 | Supplying, erecting & terminating XLPE armoured cable 3½ core 50 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL |
| 165 | Supplying, erecting & terminating XLPE armoured cable 3½ core 70 sq. mm. aluminium conductor with continuous 8.35 sq. mm. (10 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL |
| 166 | Supplying, erecting & terminating XLPE armoured cable 3½ core 120 sq. mm. aluminium conductor with continuous 12.97 sq. mm. (8 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL |
| 167 | Supplying, erecting & terminating XLPE armoured cable 3 core 4 sq. mm. copper conductor continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU |
| 168 | Supplying and laying (including excavation of suitable width & depth up to 90 cm) 50 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete. |
| 169 | Supplying and laying (including excavation of suitable width & depth up to 90 cm) 90 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete. |
| 170 | Supplying & erecting water tight terminal box of 1.6 mm (16 gauge) CRCA sheet of size 200 x 150 x 150 mm. complete on pole as per specification no. CB-SB |
| 171 | Supplying & erecting FRP box of size 150 x 125 x 100 mm, 2.7 mm thick complete on pole/wall as per specification no. CB-SB |
| 172 | Supplying and erecting steel tubular swaged pole 139.7 x 114.3 x 88.9 mm. dia with 4.5x3.65x3.25 mm thickness (4.5 + 1.75 + 1.75 m) length respectively and total 8 m long with pole cap, base plate in provided foundation.(weight 101 kg.) as per specification no. OH-PL/STP |
| 173 | Supplying and erecting rolled steel joist (girder) pole 125 x 70 mm (13.3 kg/m) with provided base plate in provided foundation as per specification no. OH-PL/RSJ |
| 174 | Supplying and erecting pre-stressed cement concrete (PSC) rectangular pole of top 105 x 115 mm & bottom of 105 x 315 mm 9 m long (200 kg) complete erected in provided C. C. foundation & muffing (square/round ) as per specification no. OH-PL/PSC |
| 175 | Supplying & erecting MS pole bracket for guarding/LT OH Line, fabricated from angle iron 50x50x6 mm and 550 mm long for necessary nos. of provided insulators and erecting on pole with 50x6mm clamp complete as per specification no. OH -PL/BKT |
| 176 | Supplying & erecting MS pole bracket, for OH conductor fabricated from ISM channel, 75x40x6mm 1100mm long for 4 insulators and erecting on pole with 50x6 mm clamp as per approved method of construction and completeas per specification no. OH-PL/BKT |
| 177 | Supplying & erecting MS pole bracket, fabricated from ISM channel, 75x40x6mm, 1100 mm long for 4 insulators and welded with extension channel pieces of same size 300 mm. in length and erecting on pole with 50x6 mm clamp as per approved method of construction and completeas per specification no. OH-PL/BKT |
| 178 | Supplying and erecting all aluminium stranded conductors 7/3.10 mm. complete. (Ant.) (145.0 kg/km) as per specification No. OH-CON/AAC |
| 179 | Supplying and erecting all aluminium stranded conductors 7/2.21 mm complete. (Gnat) (73.77kg/km) as per specification no. OH-CON/AAC |
| 180 | Supplying and erecting porcelain shackle type LT medium insulator 75x115 mm dia. with G.I. (Shackle) strips , nuts and bolts, complete. |
| 181 | Supplying and erecting G.I. stay set for poles, including loop insulators at inaccessible height complete with anchor plate 300 x 300 x 6 mm., straining screws, G.I. stay wire 7/10 SWG, G.l. stay rod 20 mm x 1.8 m length and pole clamps duly erected in provided cement concrete foundation. |
| 182 | Supplying and erecting fibre/ PVC spacers for LT overhead line 3 to 5 conductors complete erected. |
| 183 | Supplying and erecting ‘D’ type pole clamps, fabricated from 50 x 6 mm MS flat with 15 mm dia. bolts and nut fixed to steel tubular pole duly painted with one coat of red oxide and two coats of aluminium paint. |
| 184 | Dismantling the existing pole above 6 m height with brackets, clamps, insulators, stay from the cement concrete foundation and making the site clear by refilling the pits with excavated materials and bringing it to the ground level. |
| 185 | Dismantling the existing overhead line including G.I. wires of all sizes without damaging & making the coils in suitable sizes. |
| 186 | Providing pipe type earthing with 40mm. dia. G.l. pipe or 20 mm dia. G.l. Rod complete with all materials as per specification no. EA-EP |
| 187 | Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results as per specification no. EA-EP |
| 188 | Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm with funnel with a wire mesh for watering and brick masonry block C.l. cover complete with all materials, testing & recording the results as per specification no. EA-EP |
| 189 | Supplying and erecting aluminium strip of required sizes used for earthing on wall and/or any other purpose with necessary aluminium clamps fixed on wall painted with bituminous paint in an approved manner with joints required. As per specification no EA-EP. |
| 190 | Supplying and erecting GI strip of required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint in an approved manner with joints required. As per specification no EA-EP. |
| 191 | Supplying and erecting GI earth wire of high purity of different sizes used for earthing or any other purposes on wall with necessary G. I. Clamps fixed on wall/cable/ conduit with screws in an approved manner. |
| 192 | Providing printed instruction chart for treating persons suffering from electric shock, printed in English & Marathi and duly laminated complete. |
| 193 | Supplying and fixing PVC synthetic elastomer electrically insulating mat with class A insulation conforming to IS: 15652 – 2006 & CPRI tested having 2 mm thickness upto 3.3 kV |
| 194 | Supplying and fixing PVC synthetic elastomer electrically insulating mat with class B insulation conforming to IS: 15652 – 2006 & CPRI tested having 2.5 mm thickness upto 11 kV |
| 195 | Supplying shock proof leather safety shoes of electrical grade of standard size as IS :11226, 14544 duly tested, with necessary test certificate from manufacturer. |
| 196 | Carrying out servicing of DG set upto 50 kVA with/without AMF panel of any make to ensure smooth running of DG set for 30 mins on load. Checking for abnormal sound and leakages, carry out visual inspection of all moving parts, oil levels, oil filters, fuel filters, air filters and clean them properly, rectify the minor leakages if any. Inspect alternator, stator and rotor for normal speed & proper frequency, examine battery charging with monitoring system and recording voltages, checking battery cells gravity and topping up with distilled water, checking V belts with necessary adjustment, checking and retightening of nut bolts including coupling boltsof engine and alternator, checking & cleaning of radiator and leakage testing checking of radiator & fuel supply hose pipes, checking of AVR, excitation diodes, its connections confirming proper output voltage. checking & resetting of valve tappets, Cleaning of DG set internally using blower, cleaning radiator and Submit the servicing report to engineer in charge. (Non Comprehensive) as per specification no. GEN-SER-AMC |
| 197 | Topping up new lubricating oil 15W/40 grade of approved make as per IS 13656 : 2014 |
| 198 | Topping up new glycol based coolant 50/50 with operating range from 118°C to -37°C of approved make |
| 199 | Supplying and erecting V-Belt of all types and lengths, adjust tension as per requirements from generator manufacturer suitable for DG set upto 100kVA |
| 200 | Supplying and erecting lub oil filter element along with sealing rings, gasket etc complete suitable for DG Set upto 62.5 kVA. |
| 201 | Supplying and erecting fuel filter along with sealing rings, gasket, primary filter and water separator etc complete suitable for DG Set upto 50 kVA. |
| 202 | Supplying and erecting stop solenoid assembly 12V/24V single coil energized to run with or without primary etc complete suitable for DG set upto 125 kVA. |
| 203 | Supplying and erecting Air cleaner/Air filter element suitable for DG set upto 40 kVA |
| 204 | Making trench of suitable width and depth in soft soil for laying provided LT cable up to and including 16 sq.mm complete as per specification no. CW-EXN-CTR |
| 205 | Making trench of suitable width and depth in hard murum / tar road for laying provided LT cable up to and including 16 sq. mm complete as per specification no. CW-EXNCTR |
| 206 | Excavating hard Rock or bituminous road by chiselling for preparing pit for pole / stay/earth plate / for laying cable/ pipe & clearing the site by removing debris & making the site as required complete. |
| 207 | Making cement concrete foundation including excavation (60 x 60 x 150) cm deep in 1:3:6 cement concrete 20 x 25 mm stone metal, (45 x 45 x 45) cm /45 cm dia. x 45 cm height plinth duly plastered, with necessary curing and finishing complete. (above 6 m to 9 m poles) |
| 208 | Making cement concrete foundation including excavation (60 x 60 x 150) cm deep in 1:3:6 cement concrete, (20 to 25) mm stone metal with necessary curing and finishing complete.(for stay). |
| 209 | Making M- 20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity at site as 10 T/sq.m at 1.5 m depth including supply of steel, concrete, excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 6m to 8m high octagonal /conical GI pole). |
| 210 | Painting of steel tubular / rail / RSJ pole above 6.0 m length along with street light pole brackets, clamps etc by scrapping the existing paint complete. Specification no CW -PTG/PTP. |
| 211 | Painting identification number by indelible ink marker / enamel paint on fittings / equipment with the help of ladders if necessary by dismantling and refitting the enclosures, tubes etc if required the same and refitting complete. |
| 212 | Rewinding motor of the 1200/1400 mm ceiling fan and over hauling including minor repairs lubricating of ball bearings & bush bearing, and replacing condenser, screws etc. Testing of fan for original speed and consumption with guarantee for one year. |
| 213 | Replacing the existing ball bearing of table/ cabin/ pedestal/ ceiling/ exhaust fan complete with alignment of shaft & tested. |
| 214 | Replacing the existing Bush/ rubber, ring, washers of table/ cabin/ pedestal/ ceiling/ exhaust fan complete with alignment of shaft & tested. |
| 215 | Supplying & erecting automatic control panel for 1 Ph, 230 volt, a.c.. Submersible/centrifugal pump set upto 2 HP consisting of DOL starter Of suitable relay range S.P.P., Combined ammeter/ voltmeter, indicating lamp enclosed in CRCA powder coated Vibration proof enclosure with IP 54 protection. |
| 216 | Supplying and installing 25 KVA KOEL generators generator panel with 3 years warrenty. |
| 217 | Doing rewinding and repairing cooling fan of 1400rmp 220V |
| 218 | Doing repairing and fixing of thebroken main gate of 25 kVA generator with required accessories. |
| 219 | Supplying and installing fuel cap for 25 KVA generator. |
| 220 | Doing servicing of highmast (upto 15 mtr) with lowering of lights, cleaning ropes pathway lubricating the mechanisam with all necessary accessories. |
| 221 | Supplying and erecting new rope in the highmast (upto 15 mtr) by dismantling highmast with proper equipments. |
| 222 | Maintenance of 15 nos ofDecorative Pole of 15W at Park |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
