|
| 1 | Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded \"FR\" PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit \"FR\"(Precision make), with 1x22/0.3 (1.5 sqmm) single core stranded \"FR\" PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board on wall complete with 2 no. suitable size “Ph & N” copper bar incl. bakelite/Perspex (wall matching color) top cover 3 mm thick making earthing attachment, painting the MS box and mending good the damages to original finish (for wall fan)Average run 8 mtr |
| 2 | Distribution wiring in 1.1 KV grade 22/0.3 (1.5 sqmm) single core stranded \"FR\" PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit \"FR\" (Precision make), with 1.1 KV grade 1 x 22/0.3 (1.5 sqmm) single core stranded \"FR\" PVC insulated & unsheathed copper wire as ECC, to 5A 3 pin flush type plug socket & Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall incl. bakelite/Perspex (wall matching color) top cover 3 mm thick and incl. painting the MS box and mending good the damages to original finish On Board |
| 3 | Distribution wiring in 1.1 KV single core stranded \"FR\" PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit \"FR\" (Precision make) incl supply and fixing of PVC Rigid conduit incl. necy. fittings as required 2 x 22/0.3 (1.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC (for mirror light) |
| 4 | Supply & Fixing 240 V, 2 nos 6 A, 3 pin Modular type plug socket (Brand approved by EIC) with 2 nos 6A Modular type switch, without plug top on 6 Module GI Modular type switch board with top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. |
| 5 | Supply & Fixing 240 V 6 A Piano key type switch (Brandapproved by EIC) on existing sheet metal switch board having bakelite/perspex top cover by screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required |
| 6 | Supply only of A.C. Ceiling Fan complete with blades, canopy, fork etc. painting and necy240 V, 1200 mm USHA - STRIKER Plus / Orient PSPO Summer King |
| 7 | Fixing only A.C. Ceiling Fan complete with blades, canopy, fork etc. incl. S & F connection or wire by 2 x 1.5 sq. mm. PVC insulated Cu. Wire (approved make)for down rod upto 30 cm. incl. painting and necy connection as to G.S. |
| 8 | Supply & Fixing Modular type 2 module fan regulator (Step type) (Brand approved by EIC) on existing modular switch boardincl. making necy. connections etc. |
| 9 | S&F 450 mm sweep 230 V 50 Hz metal body A C wall bracket fan with string operation control( Orient wall tornado/ Crompton storm/Usha /EPC) |
| 10 | S&Fixing 230 mm dia 1400rpm heavy duty exhaust fan [EPC / CG make] with louver shutter after making hole in wall and making good damages andsmooth cement finish etc. as practicable as possible and providing2 x 1/1.40 PVC insulated and sheathed wire and making connection for exhaust. [for toilets] (make- EPC/CG) (for toilets) |
| 11 | S&Fixing 300mm dia 1400rpm heavy duty exhaust fan [EPC make] with louver shutterafter making hole in wall and making good damages and smoothcement finish etc. as practicable as possible and providing2 x 1/1.40 PVC insulated and sheathed wire and making connection for exhaust. (make:-EPC / CG) (for lift room) |
| 12 | Supply of 4ft LED 18 watt Singletube light fittings complete with all accessories [PHILIPS make cat no. TMC 501 x 1 x 18 w ]. Including S & F 18 watt LED tube[PHILIPS make] Master LED (PVC Body) |
| 13 | S/F 250 V. 9 W.LED lamp and angular batten holder.(Philips Essential ) |
| 14 | S & delivery of 4 core 16 sqmm armoured Al cable (quarter to pump room) |
| 15 | Laying of 4 core 16 sqmm cable as given below |
| 16 | Laying of cable on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) wire, making holes etc. as necy. mending good damages and painting. |
| 17 | Laying of cable in underground trench 460 mm wide x 760m average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed |
| 18 | S & F compression type cable gland & finishing the end of the cable by crimping method as to G.S. |
| 19 | 4 core 16 sqmm |
| 20 | S/F of 80 mm dia 1.5 mtr long Mini G.IPipe Pole (Medium Gauge) incl. painting & S/F base plate pole cap, earth boltsincl. necyholes as per G.S |
| 21 | Providing CC (6:3:1) muffing (600 x 600 x 450) mm in size around the pole base complet with 3 mm thick neatly finished cement plaster all sides with (250 x 250 x 100) mm steel sheet outdoor hooded typewith clamping arrangementLoop Box having 4way connector 15A fuse unitetc.accessories. |
| 22 | S/F 40 mm dia 1.5 mtr longsingle arm bracket as per direction of the E.I.C |
| 23 | S/F 250 Volt 70 watt LED outdoor type flood lightFittings complete( Philips/Crompton/Wiprow) (8 nos on roof and 25 nos on existing pole) |
| 24 | Fixing only 250 Volt 110 watt LED outdoor type street lightFittings complete( Approved make) (25 nos on existing pole)after dismantling the old HPSV fittings on 9 mtr pole. |
| 25 | S&F of 415 volt 4 bar 63 amp cu busbar loop box ofsuitable sizeon iron frame on wall including connction as per G S(Bentek make) |
| 26 | Supply and Fixing automatic control box made by 16 SWG G Isheet of approximate 450 x 600 x 150 mm fixed by flushed on wall for control of LED light with following accessories.A) 32A DP MCB (LEGRANDMAKE \"c\" curve) 1nos.B) FM-1 Quartz time switch 1nosC) ML-2Contactor 1nosD) 16/32A SP MCB (LEGRAND MAKE \"c\" curve) 3nosE) 4 bolt terminal stud1nosF) toggle switch for manual/suto operation.G) necessary connection by copper wire |
| 27 | Supply & laying 4 core 10 sqmm pvc /A cable with 1X10 SWG GI wirefor earthing attchmenton wall surface by shaddle and screwsmending good dameges to original finish. |
| 28 | Supply & laying 2 core 6 sqmm pvc /A cable with 1X10 SWG GI wirefor earthing attchment on wall surface by shaddle and screwsmending good dameges to original finish. |
| 29 | Supply & laying 2 core 6 sqmm pvc /A cable with 1X10 SWG GI wire In UG trench 460mm wide with 760mm average depth with brick protection on top of the cable with 8 nos bricks per metre including filling the space between brick and cable and also the trench with shifted soil, leveling up and restoring surface duly rammed. |
| 30 | Supply & laying 2 core 6 sqmm pvc /A cable with 1X10 SWG GI wire through GI pipe incl supply and fixing of 25 mm dia GI pipe |
| 31 | S & F compression type cable gland & Finishing the end of the cable by crimping method as to G.S.a) 4 core 10 sqmm |
| 32 | b) 2 core 6 sqmm |
| 33 | S & drawing 1.1 kv grade single core stranded FR PVC insulated unshehed cu wire (approved make) froom loop box to fittings2x1.5+1x1.5 sqmm through 13 mm dia polythene pipe incl connection. |
| 34 | Supply and fixing of 45 Watt LED Fittings IP 66 type with arm bracket (crompton/ philips) incl supply and fixing of suitable size loop box of size 200x150x100 mm deep and 4mm thick comprising 1 no 250V 15A kitkat fuse, one NL porcelain insulator, 2nos compression type brass gland upto 2 core 16 sqmm cable and lined with rubber gasketted GI top cover with brass machine screws etc., earthing terminal with lug at the pipe base, projected from the wall of the building incl. making holes/providing clamping arrangement and necy. GI reducer as required . S&F 40mm GI pipe(ISI-Medium) quality 1.5 mtrs average length having suitable bend S&F necy. length of 1.5 sqmm PVC insulated single core stranded annealed copper wire and making connection as required and making good damages to wall incl. painting etc. (for security room) |
| 35 | S & F 40 A DP isolator in 2 way MCB enclosure concealed in wall and mending good the damages to original finish. (for security light of sub station) |
| 36 | Supply and Fixing 40 Watt LED B C Lampon existing holder (make: philips/crompton) |
| 37 | Withdraing the old cable after digging pole base area of easy connection at existing loop box of security light arrangement incl. dismentaling of old muffing and repairing (half portion)of the same as to original. |
| 38 | Replacement of old Loop Box by 250 x 100 mm steel Loop box on the pole with suitable NS Clamp 25 mm x 5 mm with nut bolts and washers. |
| 39 | Supply, Installation, Testing and commissioning of LED Illumination sign board fabricated by 12’ x 4’ (ft) x 5” (inch) depth ACP box supported with 40 x 40MS hollow square pipe or Aluminum Hollow square pipe of 18 swg. all around. The 3 mm ACP facial should be provided with Laser cutting 4 mm laser cut Acrylic letterswhich is rising and border line of the front side should with cover 1” Aluminum channel as per the direction of EIC. The sign board should be glow by 1.5 W LED module cool white in colour including 12V 250W power supply. Back side of the board should be covered with 26 swg GI sheet to protect rain water. The sign board should be fixed at the wall by using nut, bolt, washers etc. after making MSsupport on wall or parapit structure and grouting the same at wall and mending good the damages as per direction of EIC. The cost of transportation and scaffolding charges are included. The sign board inscription should be the matter authorised by concerned authority. |
| 40 | Total Rs |
| 41 | Add GST @ 18% |
| 42 | Total Rs |
| 43 | Add LWC @ 1% |
