Tender For Complete Renovation Of Science Laboratory In Model School, Naseem Bagh, University Of Kashmir.--- 1 Demolishing brick work in cement mortar up to floor V level including stacking of serviceable material and disposal of unserviceable material within the campus as per directions of EIC. 2 Demolishing cement concrete work, including disposal of unserviceable material within the campus as per directions of EIC 1:3:6 or richer mix. 3 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 m lead. 4 Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses plinth and string courses fillets, columns, pillars, beams, piers, abutments, suspended floors, posts and struts, etc. up to all floor level excluding cost of centering, shuttering, finishing and reinforcement. 1:1.5:3 (1 cement:1.5 coarse sand:3 graded stone agg. 20 mm nominal size) Crushed 5 Steel Work Reinforcement for RCC works including straightening, cutting, bending placing in position and binding all complete up to all floors. Thermo mechanically heated bars. 6 Providing and fixing 18mm thick mirror polished, machine cut for floors, kitchen platform, vanity counters facieses,skirting,risers and other similar locations of required size of approved shades, color and texture laid over 20mm thick base cement mortar 1:4 (1cement: 4 coarse sand) and joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, polishing,curing etc. including moulding complete at all levels. whereever required as directed by EIC. (Black Granite-Jet Black) of approved quality. 7 Providing and fabrication of storage almirah of approved quality 19mm BWR Ply Sheets in sides, shelves and wherever required including 6mm BWR ply wood on back and 19MM pine board ply wood in shutters, inside and outside of shutters finished with Dulmica sheeting of approved quality and color on exposed faces & all internal faces of approved design and drawings including painting two or more coats of synthetic enamel paint of approved quality (where ever required)and color inside including cost of following aluminum fittings and locks of Godrej/Link make. including all other necessary accessories complete in all respects. (For payments front face to be measured)....450-600 mm deep 8 Providing and laying polished vitrified wall/ floor tiles of required size(thickness to be specified by the manufacturer) approved make in all colors, shades as approved by engineer- in-charge laid on 20mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand) for floor, including 6mm Spacers, including pointing the joints with matching pigment or any other relevant pigment as directed including cleaning the floor after finishing of work. 9 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. One or more coats on oldwork including sand papering,scraping and one coat of primer if required. 10 Providing and fixing of glass pans with wooden fillets(beadings) including nails,adhesives of required size wherever necessary. Glass pans 3.5mm thick weighing 8.70 Kg / sqm. 11 Half brick masonry with bricks of class designation 75 in superstructure up to all floor levels.In cement mortar 1cement: 4 fine sand mortar 12 Brick masonry with bricks of class designation 75 in superstructure up to all floor levels.In cement mortar 1cement: 6 fine sand mortar 13 Providing and fixing of PVC (Prince/Finolex/Jindal make) pipe (Type “B”) in proper gradient including all fittings like bends,door bends, collars,reducers halfways,door-tee inexcavated trenches/holes in walls,floors, including jointing and refilling the excavated material complete including cost of excavation. 75mm dia. Pipe 14 Providing and fixing of PVC foor Trap 75mm/100mm dia. 15 Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801,of approved make as directed by EIC UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer incharge. all types of works fixing the pipe etc and all types of adaptors 16 PN-20 pipe, 25mm OD 17 PN-20 pipe, 32mm OD 18 Providing and fixing following plumbing fixtures of approved quality Complete as directed. 19 union 25mm OD 20 union 32mm OD 21 ball valve 25mm OD 22 ball valve 32mm OD 23 Providing and fixing following plumbing fixtures of approved qualityComplete as directed by EIC 24 C.P.angle valve15mm nominal bore 25 C.P. sink mixer for lab 15mm nominal bore 26 PVC waste pipes 32mm 27 PVC connection c.p brass unions15mm 18 to 24 inch long 28 C.P gratings 100mm 29 lab sink 30 Providing and fixing of water heater (geysers) of approved make including cost of dash fasteners with nuts and washers, C.P. tubes 25 Litre capacity complete. 31 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. All work up to all levels. 1:2:4 (1Cement: 2 coarse sand:4 graded stone aggregate 20mm nominal Size) Crushed 32 12mm thick cement plaster on half brick / concrete wall of mix 1:6 (1cement: 6 coarse sand) 33 Wall painting with plastic emulsion paint (two or more coats) of approved brand and manufacture to give an even shade including applying necessary priming coat & scrapping. Old work 34 Form work. Centering and shuttering including strutting propping etc. removal of form work in Suspended floors, roofs, landings, balconies, access plat forms, Lintels, beams, plinth beams, girders, bressumers, cantilevers, Columns, pillars, piers, abutments, posts andstruts and edges of slabs etc. (M.S. Plates/Ply wood) 35 Providing and fixing Tiled/GRID false ceiling of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 grams/ sqm, both side inclusive) consisting of main “T” runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross “T” of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main “T” at 600 mm center to center to form a grid of 1200x600 mm and secondary cross “T” of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paintpaint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.0-12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard manufactured from natural gypsum as per IS 2095 part-I and laminated with white 0.16mm thick fire retardant PVC film on the face side and 12micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit. 36 Note. The quoted percentage (%age) should preferably be in fractional form in order to minimize concurrence of similar quoted rates
