Tender For Interior Furnishing Work For Ohhdpc At Khandagiri, Bhubaneswar
Tender Value
Ref. Documents
Estimated cost
Bid Submission
19 Apr 2023
0 days left
EMD
1.02 Lakhs
Bank guarantee accepted
Document Fee
11800
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
khandagiri → Odisha
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Interior Furnishing Work For Ohhdpc At Khandagiri, Bhubaneswar
BOQ
| Sl. No. | Item Description |
| 1 | INTERIOR WORKS |
| 2 | Providing and fixing conference table o type of 36\"long, 6\" wide & 3\" htwith bottom partition and 4\" bottom basemade up of fire retardant ply board and block board of Century/Archid/ Greenply /sonear make, exposed member as per drawing to be finished with 1mm thick laminate of approved make (Marino/Greenlam/Hidesign) and shade and design.including all fittings & fixtures complete as direction of Engineer in-charge. |
| 3 | Providing and fixing cupboard racks of 2400mm ht. various sizes in proper position of shelves as per approved design (32mm, 450mm depth, side thickness 100mm) with lower drawer system made up of fire retardant ply board and block board of Century/Archid/ Greenply /sonear make, exposed member as per drawing to be finished with 1mm thick laminate of approved make (Marino/Greenlam-code 693,5375,777) and shade and design. The inner unexposed will be finished with 0.8 mm thick laminateof approved make including all fittings & fixtures complete as direction of Engineer in-charge. |
| 4 | Providing and fixingPartition wall with wooden batten and12 mm fire retradent plyand1 mm laminated (make-Sonear)afffixed at both side of the partition and top fitting with toughen glass outer polishing batten necessary as per the drawing with necessary hardwarecomplete with all material and labour cost as per the direction of the EIC. |
| 5 | Provision,Supply & fitting and fixing of official table including all required fitting & fixture incluiding cost & convenance as directed by the EIC (6\"0\"x3\"0\") |
| 6 | Provision,Supply & fitting and fixing of official table including all required fitting & fixture incluiding cost & convenance as directed by the EIC (4\"0\"x2\"6\") |
| 7 | Providing & fixing gypboard suspended false ceiling with 12.5mm thick MR Ultra Gyp board (Single Layer) Gyproc make with drop ceiling as per approved design with cove light provision for different spaces as per the requirement with G.I. framework(Gypsteel) of perimeter channels, intermediate, channels and ceiling sections) and 12.5mm taped edge gypboard(MR) screw fixed to ceiling section as per design, completeincluding all cost of materials, labour, overheads T&P etc. complete as per the direction of the Engineer in-charge. |
| 8 | Providing & Fixing of wall peneling with BWP Block Board/ply laminate with anyLaminart/vinear/mirror etc. finished in all respect as per approved drawing & requirement complete as per direction of Engineer in-charge. |
| 9 | Providing, fitting and fixing of very high back executive chair, pedestral base with chrome finish with five wheels, arm material is Pu foam bounded chrome coated, seat material is PU foam covered is pure leather, material of back cover / back rest is leather and central tilt, overal chair high 1050mm , back rest hight 730mm, back rest width 530mm seat hight 450mm etc. as direction of Engineer in-Charge. Make -Godrej interio |
| 10 | Providing, fitting and fixing of conference revolving chair pedestral is base with chrome finish with five wheels, arm material is Pu foam bounded chrome coated, seat material is PU foam covered is pure leather, material of back cover / back rest is leather and central tilt, overal chair high 1050mm , back rest hight 730mm, back rest width 530mm seat hight 450mm etc. as direction of Engineer in-Charge. Make -Godrej interio |
| 11 | Providing, fitting and fixing in position work station chair pdestral is base made of ABS plasting with ABS / NYLON twin caster wheels, arm material is propylene, seat material is PU foam covered with fabric, material of fabric back cover / back rest is mesh fabric, material seat cover is polister fabric chair type is push back over hight of chair is 950mm back rest hight and width is 520mm and 440mm seat hight , width and depth is 450mm, 500mm and 480mm etc. as direction of Engineer in-Charge. Make -Godrej interio |
| 12 | Providing, fitting and fixing in positing of five seater (3 seater + 2nos one seater) loung of reputed make. Made of 18 mm tik plywood with front seat cushion material. Covering material of seat and back rest is leather fabric dimension 3 seater is 1850mm in length 850mm in height etc as direction of Engineer in-Charge. |
| 13 | Providing, fitting and fixing in positing of five seater (3 seater + 2nos one seater) loung of made by kane with sitting covering at chairman chamber etc as direction of Engineer in-Charge. |
| 14 | Providing, fitting and fixing of glass top centre table of reactngular shape made of tempered glass (18mm ) and tik wood dimension table is 1219mm x 711mm x 380mm as direction of Engineer in-Charge. |
| 15 | Supply fitting and fixing in position MAC blinds (handloom/handicrafts fabris customise ) complete as specified and directed Engineer-in-Charge. |
| 16 | Provision for decorative stone gate in between CFC-OHHDPC building with approve sainageas direction of Engineer in-Charge. |
| 17 | Providing SPC (Stone polymer Composite) vinyl flooring with 4mm size (7\"x48\") wooden type planks with necessary hardware etc as direction by EIC. |
| 18 | Providing and fixing of wall panel using 10mm thick Times Acoustic Panel (TAP) with class A fire rating as per ASTM E84.The wooden framing of specifird thickness consist of 12/19 mm ply with required hardwares @ every 600 mm c/c in vertical/horizontal direction.The floor frames are fixed to fixed to floor and soffit using fastners at every 600 mm c/c.Ahorizontal frame section is placed at every 1200 mm c/c.These borads are joined using \"type S\" self tapping SS W25/3.5X25 mm corrossion resistant dry wall steel crews spaced at 200mm centres in the feild of boards.Screw fixing is done mechanically,finally 10 mm thick Times Acoustic Panel (r) are pasted on top (using any acrylic adhesive)of the board as per the direction of Engineer-in-charge. |
| 19 | Electrical Works |
| 20 | Wiring for Circuits and Submain with following number & sizes of PVC insulated 1100 Volt Grade Multistranded Copper Conductor FRLSWire run inside 2 mm thick PVC Conduit Pipe Recessed in Ceiling / Column / Walls of Building including supply of all materials such as wires, PVC Conduit, Junction Box & Pull Box etc. complete with making good the damages caused as required and as perDirection of Engineer-In-Charge. MAKE:FINOLEX / V GUARD / POLYCAB / HAVELLS |
| 21 | 2 Nos. Single Core 2.5 mm2 Copper Wire for Phase and Neutral and 1 No. Single Core 1.5 mm2 Copper Wire for Earth Continuity Conductor as per SLD (from LDB to Room & Power Point and Common Light Point looped). |
| 22 | 2 Nos. Single Core 4.0 mm2 Copper Wire for Phase and Neutral and 1 No. Single Core 2.5 mm2 Copper Wire for Earth Continuity Conductor as per SLD. |
| 23 | 4 Nos. Single Core 6.0 mm2 Copper Wire for Phase and Neutral and 2 Nos. Single Core 4 mm2 Copper Wire for Earth Continuity Conductor as per SLD. |
| 24 | Supply, delivery, installation and testing of Telephone Outlet with Boards containing a Clip-in type Modular Telephone Socket with Top fixed on GI concealed Modular Switch Board including Connections & making good the damages caused complete as required and as per Direction of Engineer-In-Charge. |
| 25 | Wiring to Telephone Socket Outlet from Junction Box with 0.5 mm2 Twin Pair Copper Conductor Telephone Wire run inside prelaid PVC Conduit complete including termination, testing etc complete as required and as perDirection of Engineer-In-Charge. |
| 26 | Supply, delivery, installation and testing of following types of LED lights with Fixtures Directly on Wall / Ceiling of Building with all accessories. complete assembly and making connection from the suitable point outlet as per the Direction of Engineer-In-Charge.MAKE: HAVLOCK/ PHILIPS/ JAQUAR/BAJAJ |
| 27 | 40 watt Sq celling lights |
| 28 | 18 watt Sq/round celling lights |
| 29 | Strip light |
| 30 | 3 watt round celling lights |
| 31 | Supply, delivery, installation & testing of Sweep & Speed Fanincluding loop connections and making good the damages caused complete as required and as per direction of Engineer-in-charge. |
| 32 | Providing & fixing of \"44\" LED television complete in all respect with Setup Box and all accessories as per the detail drawing and the direction of the architect . |
| 33 | Supply,Installation,Testing , Commissioning of3 ton Capacity Cassate AC of approved make with all required fittings complete |
| 34 | Supply,Installation,Testing , Commissioning of2 ton Splite AC of approved make with all required fittings complete |
| 35 | Providing & Fixingof 2 KVA Invert of any reputed make like USHA/Microtek etc.Including 2 nos Exide Make Battery of required capacity and its accessories. |
| 36 | Providing & Fixingof Supply & installation of Inter active Panel board of size 86 INCHES of approved make with all required fittings complete as per direction of Engineering-in-charage. |
| 37 | SOUND SYSTEM |
| 38 | Supply of of Digital Conference System Controller . Supply voltage AC110Vor AC220V (default settings), Number of connectable conference units =254, Frequency response 40-16000Hz, Signal-to-noise ratio >80dBA, Dynamic range >85dB, Total harmonic distortion <0.05% Original input: 6.3 mm balanced Signal strength: 0.775 VAudio crosstalk >70dBApproved Make: OSL/Beyerdynamic/ Shure/NuemannMake:OSL/BOSCH/BRITSH AUCOSTICS |
| 39 | Supply of Chairman Unit with LED screen , 4 types of operation modes-vote initiation, master mute, accepting applications, Output frequency response 40-16000Hz, Earphone load >16 O, Earphone volume 10 mV, Earphone output f 3.5mm stereo jack, Max. power consumption 1.65W, Microphone Type Uni-directional electret condenser microphone, connection 7P-DIN dedicated cable with buckle.Approved Make: OSL/Beyerdynamic/ Shure/Nuemann |
| 40 | Supply of Delegate Unit with LED screen , 4 types of operation modes-vote initiation, master mute, accepting applications, Output frequency response 40-16000Hz, Earphone load >16 O, Earphone volume 10 mV, Earphone output f 3.5mm stereo jack, Max. power consumption 1.65W, Microphone Type Uni-directional electret condenser microphone, connection 7P-DIN dedicated cable with buckle.Approved Make: OSL/Beyerdynamic/ Shure/Nuemann |
| 41 | Supply of 5¾\" + 1\" Coaxial Soft Dome Tweeter, 8 OhmApproved Make: OHM/ Bose/LAcoustics/ D&BMake:OHM /BOSE |
| 42 | Supply of of Wall Mount Bracket for SpeakersApproved Make: OHM/ Bose/LAcoustics/ D&B Make:BOSE |
| 43 | Supply of 2 x 800W @ 4 Ohms, Audio Power Amplifier, Toroidal Approved Make: British Acoustics/Powersoft/LEA/LabgroupenMake:British Acoustics |
| 44 | Supply of High Precision Management System : 4-inputs, 8-ouputs with advanced correction filters & dynamic PEQ for Feedback CorrectionApproved Make: British Acoustics/Extron/DBX/SoundcraftMake:British Acoustics |
| 45 | Supply of 16 Channel Mixing Frame : 12 Microphone Inputs, 2 Stereo Inputs, Dedicated Sub Outputs, USB Playback & Recording.Approved Make: British Acoustics/Extron/DBX/SoundcraftMake:British Acoustics |
| 46 | Supply of Twin Channel True Diversity Wireless Receiver Approved Makes:OSL/ Shure/ Nuemann/DPAMake:OSL |
| 47 | Supply of Handheld true-diversity microphone transmitter (cardioid) with metal housing and on/off switch.Approved Makes: DPA/ OSL/ Shure/ NuemannMake:OSL |
| 48 | Supply of Single Channel True Diversity Wireless Receiver Approved Makes:OSL/ Shure/ Nuemann/DPAMake:OSL |
| 49 | Supply of True-diversity bodypack microphone transmitter with metal housing and on/off switch.Approved Makes: DPA/ OSL/ Shure/ NuemannMake:OSL |
| 50 | Supply of 12U Equipment RackMake:My Stand |
| 51 | Supply of CAT6 CableMake:Digisol |
| 52 | Supply of Speaker CableApproved Make:LYNQ/ Sommer/ Belden/ KlotzMake:LYNQ |
| 53 | Supply of Signal cable 2 core shielded Approved Make : LYNQ/Belden/Klotz/ SommerMake:LYNQ |
| 54 | Supply of InterconnectsMake:Nutrik |
| 55 | System installation, testing and commissioning charges |
| 56 | CCTV SURVEILLANCE SYSTEM |
| 57 | 16 Channel Real Time Standalone DVR with D1 Resolution on all 16 Channels @400tps, HDMI Port, lH264 Hardware Compression, with 16 video inputs, capacity for installing 2 SATA Hard disks, back up through Disk array and USB Network support with static and dynamic IP. Real time viewing make Crystal. |
| 58 | HV Camera DM 2 MP 3.6MM PIR |
| 59 | Secure power supply 10amp SMPS |
| 60 | BNC wired Connector |
| 61 | DC wired Connector |
| 62 | 2 TB HDD (S) |
| 63 | HDMI Cable (20mtr) |
| 64 | RG59JFX1+3X0.15 SQMM CCTV Cable (50 Mtr) COIL/DRUM |
| 65 | PVC TAPE |
| 66 | Samsung LED Monitor 44” |
| 67 | System installation, testing and commissioning charges |
| 68 | Fire Extinguishers |
| 69 | Provision for fire extinguishers ABC of approved make to be placed in required position as directed by Fire Authority / Engineer in-charge. |
| 70 | Provision for 6kg CO2 fire extinguishers for electrical equipmrnt of approved make to be placed in required position as directed by Fire Authority / Engineer in-charge. |
| 71 | Provision for shed with polycarbonate sheet at lobby portion as directed by Engineer in-charge. |
| 72 | Provision of anti-termite treatment as directed by Engineer in-charge. |
AI Tender Summary
Tender Timeline
Apr 05, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedApr 19, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedApr 20, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender