Tender For Comprehensive Welcome Maintenance Of Buildings In Hpp Dunn Marg Mall Road Offrs Md Accn And Jco Or Md Accn In The Area Of Age Br Ii Under Ge Mis Mhow
Tender Value
50 Lakhs
Estimated cost
Bid Submission
03 May 2023
0 days left
EMD
1 Lakhs
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Indore → Madhya Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Comprehensive Welcome Maintenance Of Buildings In Hpp Dunn Marg Mall Road Offrs Md Accn And Jco Or Md Accn In The Area Of Age Br Ii Under Ge Mis Mhow
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 11-Apr-2023 | Amendment to tender documents | Other | 26-Apr-2023 |
| 2 | 18-Apr-2023 | OTHER CORRIGENDUM | Other | 26-Apr-2023 |
| 3 | 26-Apr-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 03-May-2023 |
BOQ
| Sl. No. | Item Description |
| 1 | M&L for Preparation of old decorated surfaces of wall including brooming, washing, rubbing, scraping down including removal Smoke spot, moss, efflorescent salts, trading oil, grasy spotsand stopping nails marksand applying one coat of white wash on walls complete all as specified and directed. |
| 2 | All as per item No. 1 above but on ceiling. |
| 3 | M&L for complete removalof existing treatment on old decorated surface of wall and applying two coat of oil emulsion distemper white/coloured over a coat of birla wall carebased putty (if required) all as specified and directed by Engineer-in-Charge. Note:- Putty shall be measured and paid seperately under relevant item. |
| 4 | M&L for preparation of old decorated surfaces of wall including brooming, washing, roubbing scraping down. Smoke spot, moss, efflorescent salts, trading oil, grasy spotsand stopping nails marks and applying one coat of oil emulsion distemper all as specified. |
| 5 | M&L for preparation of old painted surfaces of wood/wood based materials exceeding 10cm in width or girth and applying one coat of synthetic enamel paint as specified. |
| 6 | All as per item No. 5 above but on steel surfaces. |
| 7 | M&L for complete removalof existing treatment of wall and applying twocoats ofexterior weather proof water base emulsionpaint white/coloured over a coat of oil base base primer over a coat of white cement based putty (if required) all as specified . Note :-Putty shall be measured and paid seperately under relevant item. |
| 8 | M&L for preparation of old decorated surfaces of wall including brooming , scraping down. Smoke spot, moss, efflorescent salts, trading oil, grasy spotsand stopping nails marksand applying one coat ofexterior weather proof water base emulsionpaint white/coloured over a coat of oil baseprimer over a coat of white cement based putty (if required) all as specified. Note : Putty shall be measured and paid seperately under relevant item. |
| 9 | M&L for applying one coat of1.5 mm thick wall care puttyon walls/ceiling all as specified |
| 10 | M&L for preparation of old decorated surface of wall including brooming, down, scrapping down smoke spot and stopping nails mark by filling Birla white putty and applying one coat of cement based paint over a coat of primer complete all as specified and directed. |
| 11 | All as per item No. 10 above but two coats of cement base paint |
| 12 | Dismantling of floor, hearth , or wall tiling including cement mortar bedding ( but not backing ) removing serviceable tiles to store yardand rubbish off the primeses complete all as specified. |
| 13 | Demolition of cement concrete in ground floor and paving not exceeding 15cm thick ( below or above ground level ) complete including removal of debries out side MD land all asspecified . |
| 14 | M&L for25mm thick PCC (1:2:4) type B0using 12.50mm graded crushedstone aggregate as in sub base, levelling course, etc complete all as specified |
| 15 | M&L for40mm thick PCC 1:2:4type B1 using 20 mm graded crushed stone aggregateas in flooring complete all as specified |
| 16 | M&L for non skidceramic colouredtiles 7-8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exc 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in colouredcement to match with colour of tile over and including 15mm thick screed bed or bedding layer in CM 1: 6 complete all as specified |
| 17 | All as per item no 16above but as in skirting/ dado etc with and including 10mm thick backing coat in cement mortar 1:4 on wall complete all as specified |
| 18 | M&L for glazed ceramic coloured tiles of size 450x350x7 mm thick as in vertical surfaces such as wall, dado ,skirting etc set and jointed in neat cement slurry and pointed with coloured cement to match withcolour of tile over and including 10 mm thickbacking coat on fair faces of brick work in CM (1:4) complete all as specified |
| 19 | M&L for 75 mm thick PCC1:4:8 type D2 using 40mm graded stone aggregate as in foundation, sub base of floor, etccomplete all as specified. |
| 20 | M & L for 75mm thick cement concrete 1:3:6 type C2 using 40mm graded stone aggregateas in floor/ plinth protection finish the surface even and smooth without using extra cement including filling the expansion joints with bitumen filler / filler boards and necessary form work etc complete all as specified and as directed. |
| 21 | Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc complete all as specified. |
| 22 | M&L for 20 mm thickgranite (green marble) machine cut, in floor bedded and jointed with grey cement slurry and pointed with white cement mixed withadmixture of pigment to match the shade of granite stone including grinding and polishing of approved quality ofany sizeset and jointed in greycementslurry laid over and including 15 mm thick screed bed in CM (1:4) includingpolishing the granite stone by using mechanical grinder and moulding edges compete all as specified and as directed. |
| 23 | S&F in repairs of 500 litres capacity Rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) double layered hoisted and fixed in position complete all as specified in SSR Part-I |
| 24 | S&F in repairs of 1000 litres capacity Rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) double layered hoisted and fixed in position complete all as specified in SSR Part-I |
| 25 | M&L for Cleaning and removing all dirts and scales from service water tanksand from mouth of circulating pipes etc capacity of tank exceeding 250 litres but not exceeding 500 litrescomplete all as specified. |
| 26 | All as per item no 25 above but exceeding 500 litres but not exceeding 1000 litres capacity complete all as specified |
| 27 | S&F in repair 15mm bore ball valve high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipes and fixed. ( minimum Weight 142 gms) |
| 28 | S&F in repair 20mm bore ball valve high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipes and fixed. ( minimum Weight 210 gms) |
| 29 | Taking up ordown 15 mm dia old serviceable / unserviceable steel tubing any grade and connections cleaning for re-fixing or removal to store complete all as specified anddirected . |
| 30 | All as per item no 29 above but for 20mm bore |
| 31 | S&F steel tubing medium grade ,galvanized with all fitting such as bend ,elbow, socket,tees,and fixed complete to wall or in ceiling or in floors including cutting threading and making forged bends on pipes MS hooks etc ,for 15mm bore pipes complete all as specified and as directed. |
| 32 | All as per item no31 above but for 20mm bore |
| 33 | S&F in repairs 15 mm CP long neck bib taps screwed down high pressurechromium plated screwed for iron pipe and fixedcomplete all as specified |
| 34 | S&F in repairs 15 mm dia bib taps cast copper alloy, screwed down high pressurechromium plated screwed for iron pipe and fixedcomplete all as specified. |
| 35 | S&F in repairs 15 mm dia bib cock two way with flange, cast copper alloy, fancy type, chromium plated screwed down for iron pipe and fixed in repairs complete all as specified |
| 36 | S&F in repairstop valves fancy type chromium plated with long shanks fixed with 15 mm dia bore pipes complete all as specified. |
| 37 | S&F in repair pillar taps (swan neck type) cast copper alloy with capstan head, screwed down ,high pressure with long screwed shanks and fly nuts fixed in 15 mm bore pipes complete all as specified. |
| 38 | S&F in repairs 15 mm stop cockcast copper alloy, screwed down high pressurechromium plated screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 39 | S&F in repairsconcealedstop valves fancy type chromium plated with long shanksand cup fixed with 15 mm dia bore pipescomplete all as specifiedand as directed. |
| 40 | S&F in repairs Stainless steel sink, 1.00mm thick for kitchen, with plug, washes and waste/coupling, including bedding in cement mortar on to dwarf wallor including fixingcantilever brackets and connecting union to pipe, overall size 495mm x 420mm with bowl size 410mmx 330mmx 160mm fixed with PVC waste pipe complete all as specified and directed. |
| 41 | S&F in repairs Stainless steel sink with drainage board , 1.00mm thick for kitchen, with plug, washers and wastes couplin ,waste pipe etcincluding bedding in cement mortar on to dwarf wallor including fixingcantilever brackets and connecting union to pipe, overall size 915mm x 460mm with bowl size 410mmx 330mmx 160mm fixed complete all as specified and directed. |
| 42 | S&F in repairs PVC low level flushing cisternof 10 Litres capacity with all internal fittings including flush pipe and fixing to supply pipe complete all as specified. |
| 43 | Taking down and re-fixing WHB/flushing cistern/EWC/ kitchen sink and similar items at same or other location, including cutting for ends and pinning inand ends of brackets or erecting stand but exclusive of fixing of supply and waste pipes,etc complete all as specified and as directed. |
| 44 | S&F in repair vitreous china wash down water closet pedestalpattern white excluding flushing cistern and flush pipes complete all as specified and as directed . |
| 45 | S&F in repair vitreous china squatting pan `Orissa \" pattern of size 580x440mm white with integral foot rest (excluding flushing cistern and flush pipes) including connection to trap and to flush pipe etc including lime concrete bedding and \"P\" or \"S\" trap complete all as specified and as directed. |
| 46 | S&F in repair health faucet with flexible pipe of one metre length including wall hook forEWC complete |
| 47 | S&F in repair flexible type PVC waste pipe 32 mm bore of pipe for WHB/SINK/urinal, etc complete all as specified |
| 48 | S&F in repairs PVC (SWR) floor trap plain or multi with stainless steel grating including joining to waste pipe with solvent cement joint dia of outlet 75mm bore complete all as specified . |
| 49 | S&F in repairs of brass CP tubular towel rail 20 mm dia 60cm long between flange with brackets etccomplete all as specified. |
| 50 | S&F in repair 125 mm size chromium plated showerrosewith siwel joint suitable for 15 mm bore GI pipes comlete all as directed. |
| 51 | S&F in repairsPlastic water closet seat cover in white colour,closed pattern with flat bottom, and mild steel chromium plated for aluminised hinging device complete. |
| 52 | M&L fixed in repairswash basins, vitreous China white flat back size 580x450mm size, including cutting for and pinning in ends with & incl MS adjustable brackets or erecting standcomplete all as specified and directed. |
| 53 | S&F in repairs PVC connections 15mm size with PTMT nuts of length 450mm.complete . |
| 54 | S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long |
| 55 | S&F in repair corner glass shelf (with bracket) standard all as specified and directed |
| 56 | S&F in repair 150 mm long ordinary rat tail rod pattern spring including roller and roller plate complete all as specified. |
| 57 | S&F in repair of CP grating 100mm dia complete. |
| 58 | S&F in repair 600x450mm bevelled edge mirror of selected quality glass mounted on PVC framed and fixed to wooden plug with CP screw and CP washer ccomplete all as specified. |
| 59 | S&F in repair 300x450mm PVC cabinetmirror of selected quality glass mounted on PVC framed and fixed to wooden plug with CP screw and CP washer ccomplete all as specified |
| 60 | S&F in repair 25 mm dia aluminiumpowder coateddrapperycurtain rod withbrass /nickel chrom polish bracket complete all as specified . |
| 61 | S&F in repairsCP waste coupling of size 32 mm dia WHB with long screwed shanks and fly nut complete all as specified |
| 62 | M&L for resecuring or easing and adjusting without taking down shutter of any description n exc 1.0 sqm each |
| 63 | M&L for resecuring or easing and adjusting without taking down shutter of any description exc 1.0 sqm but nexc 2.0 sqm each |
| 64 | S&F in repair 100mm size aluminium anodised, barrel tower bolt of extruded section. |
| 65 | All as per item No 64 above but 150mm long |
| 66 | S&F in repair aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruted section and fixing bolt and sliding bolts of extruded section and cast iron - aluminium alloy 300 mm long. |
| 67 | M&L for cutting chases in brick wall built in cement mortar for concealed water tubing and making good with cement mortar1:4 ,cutting depth not exc 10 cm complete all as specified |
| 68 | M&L Taking down cement plaster on brick or stone walls, etc. with raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and as directed |
| 69 | Demolition of brick work built in cement mortar of any description including all quions arches, pillars, etc complete all as specified and directed. |
| 70 | M & L for brickwork with sub class \"B\" modular bricks, straight or curved on plan exc 6 m mean radius, built in CM 1:6 complete all as specified and as directed. |
| 71 | M&L brick work in CM ( 1:4 ) with using sub class `B ` modular half brick workstraight or curved on plan exceeding 6.0mtr mean radius complete all as specified anddirected. |
| 72 | M&L for rendering 10 mm thick in CM ( 1:6 ) on wall/ concrete surfaces finished even and smooth without using extra cementcomplete all as specified |
| 73 | M&L for rendering 15 mm thick in CM ( 1:4 ) on wall/ concrete surfaces finished even and smooth without using extra cement WPC compound complete all as specifiedNote: WPC shall be measured and paid separetly under relevant item. |
| 74 | M&L for 5 mm thick plaster on ceiling in cement mortar 1:3 finished even and smooth without using extra cement complete all as specified |
| 75 | Supply only Liquid water proofing compound |
| 76 | M&L forapplying two coats of oil bound distemper over a coat of 2mm thick wall care putty (JK/Birla) on new plastered surface of walls including preparation of surfaces. |
| 77 | M&L for preparation of newly plastered surface by using sand paper to make the surface even and smooth and applying 2mm thick JK/BIRLA white putty on prepared surface and applying two coats of weather coat paint (Weather coat Exterior emulsion )manufactured by Berger\" or Asain Apex white tintedover a coat of whitewater base primer complete all as specified and directed by Engineer in charge. |
| 78 | M & L for preparation of newplasteredsurfaces of walls and applying two coats of cement based paint over a coat of cement primer completeall as specified |
| 79 | M & L for preparing new plastered surfaces and applying three coats of white wash on ceilingand cornices complete all as specified. |
| 80 | S&F in repair of floor door stopper 140mm long of aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in floor |
| 81 | S&F in repair Mild Steel Door Spring 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete |
| 82 | S&F in repairs of Sheet glass 3mm thick ordinary quality and glazing with oil putty in square n exc 0.5 sq.m in each pane |
| 83 | Taking down shutters of any description n.exc 1.0 sqm each complete all as specified |
| 84 | Taking down shutters of any description exc 1.0 sqm but n.exc 2.0 Sqm each complete all as specified |
| 85 | Taking down chowkhats or frames with shutter (with out taking off shutters from the frame) area n. exc 1.5 sqm each complete all as specified |
| 86 | Taking down chowkhats or frames with shutter (with out taking off shutters from the frame) area exc 1.5 but n exc 4.0 sqm each complete all as specified . |
| 87 | S & F for second class hard wood as in plain, solid straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and as directed. |
| 88 | S&F second class Hard wood35 mm thick glazed and skeleton(doors)shutters, open rebated and prepared to receive glass gauge etc, (with sash bars) edges of framing plain, chafered or rounded , fitted with cut and mitred beads for securing glass etc, size of members of shutter as specified in SSR Part I, Section 8, clause 8.2 (a) Supplied and fitted to chowkats complete all as specified and directed. |
| 89 | S&F 30mm thick factory made, second class hard wood,glazed and skeleton window/ventilator shutters, open repeated and prepared to receive glass,gauze etc(with sash bars) edges of framing plain, chamfered or rounded ,fitted with cut and mitered beads for securing glass etc, size of member of shutter as per specified in SSR part-I section 8,clause 8.24 (b) and for window and fixed with chowkats, chemically pressure treated complete all as specified and as directed. |
| 90 | S&F for 35mm thick 2nd class hard wood plain, framed pannelled shutters (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board wiyh commercial veneering on both faces. The size of rail and stile as per (IS : 1003 part-I , kiln seasoned and chemically pressure treated complete all as specified and as directed. |
| 91 | S&F 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 92 | S&Ffactory made solid PVC door frame of size 50mm x 47mm made out of plain 5mm plain colour PVC sheet reinforced with ms square tube, with wooden grain printed PVC sheet used inserted of plain colour PVC sheet & edges will be painted to match with printed sheet complete all as specified and as directed. |
| 93 | S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of ms tubes for top & bottom rails.MS frame shall be covered with heat moulded plain colour PVC \"C\" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colourPVC sheet for top rail, lock rail & bottom rail. Panelling of plain colourPVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified and as directed. |
| 94 | S&F 100 mm Butt hinges medium weight cold rolled mild steel and fixed |
| 95 | S&F 75mm Butt hinges medium weight cold rolled mild steel and fixed |
| 96 | S&F 300 mm long aluminium alloy anodized sliding door bolts with Hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified |
| 97 | S&F stainless steel butt hinges 100mm size medium weight and fixed |
| 98 | S&FAluminium anodised barrel tower bolts of extruded section, 150mm long . |
| 99 | S&F Aluminium anodised barrel tower bolts of extruded section, 200mm long |
| 100 | S&F Extruded aluminium alloy handles fabricated type anodised 100 mm size . |
| 101 | S&F Extruded aluminium alloy handles fabricated type anodised 150mm size |
| 102 | S&F second class hardwood small fittings such as door and window stops and the like not exceeding 200 cucm each fixed |
| 103 | S&F galvanaised mild steel wire cloth of0.56mm dia wire and average width of aperture 1.18mm & fixed with tacks or galvanised wire staples,etc complete all as specified as directed. |
| 104 | Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames or stone, concrete or brick surrounds, glazed with putty of fixed with beads including Supply and fix sheet glass plain ordinary quality 3.00 mm thick and glazing with oil putty/Bead not exc. 0.50 sqm in each pane complete all as specified |
| 105 | S&F sheet glass 3.0 mm thick ordinary quality and glazing with oil putty, in squares n. exc 0.5 Sqm in each pan complete all as specified. |
| 106 | S&F figured glass pin head type3.0 mm thick ordinary quality and glazing with oil putty, in squares n. exc 0.5 sqm in each pan complete all as specified . |
| 107 | S&F in repairgalvanised Stainless steel wire cloth of0.36mm dia wire and average width of aperture 1.4mm & fixed with tacks of stainless steel wire staples,etc complete all as specified |
| 108 | M&L for Preparing new or previously untreated surfaces of wood and wood based materials of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over and including a coat of pink primer complete all as specified |
| 109 | M&L for cleaning of roof slab/chajja by sweeping with brooms,removing all depositions/mud/vegetations etc and removing the spoil to a distance n.exc 50m all as specified and directed. |
| 110 | M&L for Cutting of shubs,vegetation including small trees,grass,bush,weed and roots under growth and saplings n.exc 30cm in girth on wall/roof/chajja upto 14m height including necessary scaffolding/ ladder etc and removing to adi stance n.exc 50m,clearing site all as specified and directed. Note : scaffolding, ladder and safety equiptment as requried for cutting of shubs, vegetation shall be provided by contractor without any extra cost. |
| 111 | S&F in repair Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on both faces; fixed with screws to timber frame work complete all as specified . |
| 112 | S&F in repairs Block boards, grade 1 quality, exterior grade, decorative type with decorative face veneer on both facesfor 18/19mm fixed with screws to timber frame work complete all as specified |
| 113 | S&F in repairs second class hard wood Beads, straight n.exc of size 40 Sqcm for glazed or gauzed joinery, renewed, including mitres etc complete all as specified.Position |
| 114 | M&L for preparation of old decoratedplastered surfaces or un-plastered surfaces of wall and applying twocoats ofoil emulsiondistemper complete all as specified |
| 115 | S&Fnon-skidceramic colouredtiles 7-8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed incolouredcement to match with colour of tile over and including 15mm thick screed bed in CM 1: 6 complete all as specified |
| 116 | S&F scratch free vitrified ceramic tiles10mm thick (square or rectangular) area of each tile not exceeding 0.36 sqm n exc 0.42 sqm ,in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match dark shade over and including 15mm thick screed bed or bedding layerin CM 1:6 complete all as specified |
| 117 | All as per item No 116 above but as in skirting/ dado etc with and including 10mm thick backing coat in cement mortar 1:4 an wall complete all as specified |
| 118 | M&L for 20 mm thickgranite (black) machine cut, as in skirting / dado laid over and including 10 mm thick backing in CM (1:4)and jointed with grey cement slurryand pointed with white cement mixed with admixture of pigment to match the shade of granite stone including grinding and polishingby using mechanical grinder and moulding edges compete all as specified and as directed. |
| 119 | S&F in repair CP wall mixer for mixing hot & cold water screwed down for ironpipe 15mm borecomplete all as specified |
| 120 | S&F in repairs15 mm dia wash basin mixutre, centre hole, mixing hot & cold water, fancy type, cast copper alloy, chromimum plated with capstan head, chromium plated, screwed down high pressure, screwed for iron pipe etc complete all as specfied |
| 121 | S&Fstain less steel plate rack for kitchen 1 mm thick of best quality with suitable hanging arrangement and fixed to wall complete all as specified and as directed.Note:- Size of plate rack shallnot be less than 900x1200 mm and weight of rack shall not be less than 8.5 Kg each. |
| 122 | S& F in repair CP towel ring, dia not less than 200mmcomplete all as specified and directed. |
| 123 | S&F in repair CP Jet spraysuitable for 15mm bore with 1m lenght pipe and connecting pieces including all necessary fittings and accessories as directed by Engr in Charge.Make: Prayag or equivalent |
| 124 | S&F in repairs pedestalwash basins, vitreous China white flat back of size 580x450mm size, including cutting for and pinning in ends with & incl MS adjustable brackets or erecting standcomplete all as specified and directed. |
| 125 | S&F in repair brass /nickel chrom polished bracketssuitable for 25 mm dia aluminiumpowder coateddrapperycurtain rodall as specified and directed . |
| 126 | S&Fin repair 150 mm long aluminium handles, cast type, anodised fixed to shutters |
| 127 | S&Fin repair 100 mm size Butt hinges medium weight cold rolled mild steel and fixed |
| 128 | S&Fin repair 75mm size Butt hinges medium weight cold rolled mild steel and fixed |
| 129 | S&F in repair50mm sizeButt hinges medium weight cold rolled mild steel and fixed |
| 130 | S&Fpressed steel doorframe of size 125mmx60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate,etc.complete all as specified . |
| 131 | M&L for preparation of newlysteel surfaces, of any description, over 10 cm in width or girth, and applying two coats of synthetic enamel paint over a coat of red oxide primercomplete all as specified. |
| 132 | S&F in repair galvanaised mild steel wire cloth of0.56mm dia wire and average width of aperture 1.18mm & fixed with tacks or galvanised I wire staples,etc complete all as specified |
| 133 | S&F 50 mm size Butt hinges medium weight cold rolled mild steel and fixed |
| 134 | S&FMild steel barrel tower bolts of length 150mmstove enamelled blackwith bright bolt |
| 135 | S&FMild steel barrel tower bolts of length 125mmstove enamelled blackwith bright bolt |
| 136 | S&FMild steel barrel tower bolts of length 100mmstove enamelled blackwith bright bolt |
| 137 | S&F Mild steel pressed handles of size 150mm , oval type, stove enamelled black |
| 138 | S&F Mild steel pressed handles of size 100mm , oval type, stove enamelled black |
| 139 | S&F Mild steel pressed handles of size 75mm , oval type, stove enamelled black |
| 140 | S&F 300mmmild steelordinary rat tail rod pattern springs including roller and roller plate |
| 141 | S & F Powder coated aluminium sliding glazedwindows with three track shutter sliding (two shutters glazed and one shutterwire mesh) shall be two part as upper partshall be three movable shutterand lower part consist ofthree shutter (one openable in centre and both side fixed type shutter with frosted glass) with following specification and making good the adjacent side of jambs of windows by plastering in CM1: 3 finished even and smooth complete etc . including shifting of existing cooler stand asrequired at sitecomplete all as specified and as directed by Engineer -in-charge.(i)Windows frame of cross section 101mm x 44mm x 1.5mm thick. (Min)(ii)Three way track for sliding shutters of cross section91.8mm x 31.75mm x1.1mm thick.(Min)(iii)Sliding shutter frame of cross section40 x 18 x 1mm thick.(Min)(iv)4 mm thickglass superior quality.(Min)(v) IDPE Rubber guasket for fixing of glass.(vi)Locking cleats per shutter -01 Nos.(Min)(vii)Sliding rollers per shutter - 02 Nos.(Min)(viii) Stainless steelwire cloth 0.30mm nominal dia of wire and average width of aperture 1.40mm for shutters 01 Nos.(Ix)fixing screw for frame with wall per windows- 08 Nos. |
| 142 | S&F powder coated aluminium ventilator cross section conforming to IS 63.5x38.10x1.5mm consisting of two partitions upper portion shall have louvers with 3mm thick pin headed glass and aluminium wire cloth 0.30mm nominal dia of wire and average width of aperture 1.56 mm fixed with aluminium beads and securing on outer face of frame and lower portion of ventilation shall be fixed with 3mm thick pin headed glass with IDPE rubber gasket including aluminium beads, including preparation of jambs all around in CM 1:3 finished even and smooth complete all as specified and directed. |
| 143 | S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed. |
| 144 | S&F in repairs18mm thickfactory made 100% solid rigid PVC (Poly Vinyl Chloride) foam sheet Prelam colour having density of 600kg/cbm manufactured by an Iso 9001-2015 certified company.Termite proof,water proof and flame retardant PVC sheet,manufactured by single layer extrusion process for one side prelaminated solid PVC foam sheet. PVC film laminate should be pasted on PVC sheet with suitable adhesive and approved shade. |
| 145 | S&F in repairs stainless steel self closing hinge of 75 mm size for PVC door shutter |
| 146 | S&F in repairs 100 mm size MS mat / glossy finish handle |
| 147 | S&F in repairs 50mm X 15 mm size magnet door catcher for closing for PVC door shutter |
| 148 | S&F in repairs mild steel drawer cabinet channel for moving the drawer |
| 149 | S & F in repair modular type stainless steel basket of size 0.50 m x 0.53 m x 0.10 m (dia of wire not less than 3.0mm) of any shape with side sliding roller clip and sliding rails on both side fixed with steel screws including all fixing arranementcomplete as specified and dirceted. |
| 150 | All as per item no 149above but basket of size 0.50 m x 0.53 m x 0.15 m |
| 151 | All as per item no 149above but basket of size 0.50 m x 0.53 m x 0.21 m |
| 152 | S&F in repairMSbright finshed 40mm dia cupboard knob fixed with nuts, screw and washer |
| 153 | S&F in repairfloor door stopper 140mm long of aluminium alloy body and tongue, anodised, with hard drawn steel spring and fixed in floor |
| 154 | S&F in repairs 300mmmild steelordinary rat tail rod pattern springs including roller and roller plate |
| 155 | S&F 18/19 mm thick,prelaminated particle board, interior grade,prelaminated on one side with decorative choice lamination & other side balancing white lamination,fixed with screws to timber frame work, etc completed all as specified. |
| 156 | S&F in repairs secondclass hard wood plain fillet, square, rectangular in sectionexc 3 sqcm butn .exc 6 Sqcmfor glazed or gauzed joinery, renewed, including mitres etc.complete |
| 157 | S&F in repairs secondclass hard wood plain fillet, square, rectangular in sectionexc 13 sqcm butn .exc 25 Sqcmfor glazed or gauzed joinery, renewed, including mitres etc.complete |
| 158 | S&Fin repairs stainless steel hinges for modular kitchen shuttersall as specified and as directed. |
| 159 | S&Fin repairs powder coated aluminium door seals 120 cm in length and 3 cm in width with rubber gasket fixed at bottom of door complete all as specified and as directed. |
AI Tender Summary
Tender Timeline
Apr 26, 2023
11:30 IST
Tender Published
Tender notice published.
Completed
Apr 26, 2023
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Apr 26, 2023
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Completed
May 03, 2023
18:00 IST
Corrigendum-3 Issued
Clarifications on tender conditions and amendments issued.
CompletedMay 03, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMay 05, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender