|
| 1 | Limit Switch Oil Tight |
| 2 | Limit switch Oil tight and dust proof, die cast aluminium housing suitable for 415 Volts (or above),50 Hz, 10Amp (or above). AC supply for quick braking, spring loaded lever with roller 01 NO.+01 NC Auxiliarycontact with normal angular lever as per ESSEN model type LSRS or BCH catalogue Code No.-LLGS. Matspecn. IS-2147/ 1962(or latest), IES: 60947-5-1,IP-65 or similar of make- BCH or L&T or Jeevan/Schineider orSIEMENS or ESSEN. [ Warranty Period: 30 Months after the date of delivery ] |
| 3 | (i) 4 Pin plug & Socket, 30A, 415V, AC, 3P+E. Make:- BCH / Havells / SIEMENS / Jeevan. (ii) 5Pin plug & Socket, 30A, 415V, AC, 3P+N+E. Make:- BCH / Havells / SIEMENS / Jeevan. 1 set consisting of SLNo. (i) 1 no.each & SL No. (ii) 1 no. each. [ Warranty Period: 30 Months after the date of delivery ] |
| 4 | 3 Phase Contactor NHD series 4 pole AC control contactor Magnetic Coil AC 3 rating 25 Amp, CoilVoltage380/415 V AC with top mounting auxiliary contact block one 1 NO + 1 NC. Make:- BCH / Havells /SIEMENS /L&T/ Jeevan Schneider. [ Warranty Period: 30 Months after the date of delivery ] |
| 5 | 3 Phase Contactor NHD series 4 pole AC control contactor Magnetic Coil AC 3 rating 50 Amp, CoilVoltage 380/415 V AC, as per BCH model : NIN or similar with top mounting auxiliary contact block one 1 NO +1 NC. Make:- BCH / Havells / SIEMENS / L&T / Jeevan / Schneider. [ Warranty Period: 30 Months after thedate of delivery ] |
| 6 | Brake Coil for 7.5 HP Motor (Fail safe disc brake assmly). Make:- Delta / Pethe / ABB / Crompton.[ Warranty Period: 30 Months after the date of delivery ] |
| 7 | (I) Bearing Seal, WJ-19/M, Size-Bore-60mm, OSD-90mm, Width-13mm, (Spring Loaded Oil Seal),as per drg no.WJ-19/M Alt-1. Make - Sunny / Dulux / Royal Plus / Alley, Qty- 01 No. (ii) Thrust Bearing Seal WJ-20/M, Size- Bore-146mm, OD-175mm, Width- 19mm, (Spring Loaded Oil Seal), as per drg no.WJ-20/M Alt-1.Make - Sunny / Dulux / Royal Plus / Alley, Qty- 01 No. 1 set consisting of SL No. (i) & SL No. (ii) [ WarrantyPeriod: 30 Months after the date of delivery ] |
| 8 | (A) Direct Online Starter wall mounting type with push button control, suitable for 3 phase 50 HZ.415 V for 30 HP Motor. The contactor coil of the starter must be suitable for 415 V. 50 HZ. AC supply. The startershall be complete with over load and NO Volt. Protection. Material Specification: IS: 8544 (Part-1) IS: 13947- 4 -1. Make: BCH /SIEMENS / Havells / Jeevan / SCHNEIDER / L&T., Qty-1 no. (B) Supply & Fitment of Materialfor 30 HP DOL Starters (Master) in SL. No. (A) of 25T Universal JMP Jack (i) Red phase indicating lamp 415VAC Qty-1 No. (ii) Yellow phase indicating lamp 415 V AC Qty-1 No. (iii) Blue phase indicating lamp 415 V ACQty-1 No. (iv) On indicating lamp 415V AC (Red) Qty-1 No. (v) Off indicating lamp 415V AC (Green) Qty-1 No.(vi) Trip indicating lamp 415V AC (Amber) Qty-1 No. (vii) Emergency push button Qty-1 No. (viii) 0-500V ACanalog voltmeter Qty-1 No. (ix) 3 phase voltmeter selector switch Qty-1 No. (x) Single phasing, phasereversal/phase sequence protection relay Qty-1 No. (xi) Reset button to release overload relay in case of trippingQty-1 No. (xii)TB 30A 6 way Qty-1 No. & (xiii) TB 30A 4 way Qty-1 No. (1 set consisting of Sl No. i to xiii)Make:BCH / SIEMENS / Havells / Jeevan / SCHNEIDER / L&T. (1 set consisting of Sl No. A & B). [ WarrantyPeriod: 30 Months after the date of delivery ] |
| 9 | (A) Direct On line Starter with 2 sets of 3 pole / 4 pole contactors (2 sets AC contactor coils, 25AMP each), each set controlled separately by 415V. 50HZ AC Contactor Coils. One set of contactor coil is to becontrolled by the forward direction of rotation through an inching type push button and the other set throughanother inching button to control the reverse direction of 7.5 HP, 3Phase, 50HZ, 415Volts, AC Motor. There mustbe electrical interlocking contact to prevent both set of contactors to close simultaneously. Each of above pushbuttons should have one normally closed auxiliary contact and one stop push buttons are required. The startershall be complete with over load, shall be wired and shall be provided with power plug and socket with lockingarrangement as shown in schematic Drawing No. 1736/23 and 1737/23 Alt.-1. Each starter is to be provided with2 Nos. power plug and sockets and 2 Nos. of control plug and sockets. Maximum Dimension of the startershould not excessed 280mm (B) X 430mm (L) X 175mm (T) irrespective of Dimension. Material Spec.: IS:13947 Pt.-4 Sec.-1, 1993, Make: BCH or SIEMENS or Havells or Jeevan / SCHNEIDER or L&T. Qty. 1 no.(B)Supply & Fitment of Material for 7.5 HP DOL Starters (Individual) in SL No. (A)of 25T Universal JMP Jack SlNo. (i) Up indicating lamp 415V AC (Red) Qty-1 No. (ii) Down indicating lamp 415V AC (Red) Qty-1 No. (iii) Tripindicating lamp 415V AC (Amber) Qty-1 No. (iv) ) 415V AC 2NO+2NC FS-C 45MM Control Relay Qty-1 No. (v)Reset Button to release overload relay in case of tripping Qty-1 No. & (vi) 30A 3 way terminal block Qty-2 Nos.(1 set consisting of Sl No. i to vi) Make :BCH/Siemens/L&T/C&S/Jeevan. (1 set consisting of Sl No. A & B). [Warranty Period: 30 Months after the date of delivery ] |
| 10 | Spare Kit Box as per ER JMP SK.No. WJ-02/2014/A & 02/2014. Make: indigenous. [ WarrantyPeriod: 30 Months after the date of delivery ] |
| 11 | Sprocket Large, WJ-24/M as per JMP Drg. No. WJ-24/M alt-d Make-Indigenous. [ WarrantyPeriod: 30 Months after the date of delivery ] |
| 12 | Sprocket Small, as per JMP Drg. NO.JMP/JACK /03/2020 Alt-1, Make Indigenous. [ WarrantyPeriod: 30 Months after the date of delivery ] |
| 13 | Single Row Deep Groove Ball Bearing SKF-6215 or Similar, size-75mm ID, 130mm OD, 25mmthickness. Mat. Specn. BS-292 or latest. Make : FAG / SKF / MBE/ TATA Bearings . [ Warranty Period: 30Months after the date of delivery ] |
| 14 | Self-Aligning Ball Bearing SKF-2310 or Similar, size-50mm ID, 110mm OD, 40mm thickness. Mat.Specn. BS-292 or latest. Make : FAG / SKF / MBE/ TATA Bearings . [ Warranty Period: 30 Months after thedate of delivery ] |
| 15 | Single Row Deep Groove Ball Bearing SKF-6208 or Similar, size-40mm ID, 80mm OD, 18mmthickness. Mat. Specn. BS-292 or latest. Make : FAG / SKF / MBE/ TATA Bearings . [ Warranty Period: 30Months after the date of delivery ] |
| 16 | Single Row Angular Contact Ball Bearing SKF-7213 BEM or Similar (size-65 mm ID, 120mm OD,23mm thickness). Mat. Specn. BS-292 or latest. Make : FAG / SKF / MBE/ TATA Bearings . [ Warranty Period:30 Months after the date of delivery ] |
| 17 | Single Acting thrust Ball Bearing Sphered Housing Washer and non-Acting Ring SKF-53416U orSimilar, size - 80 mm ID, 175 mm OD, 78mm thickness, Mat. Specn. BS-292 or latest. Make : FAG / SKF /MBE / TATA Bearings . [ Warranty Period: 30 Months after the date of delivery ] |
