Tender For Construction Of Women Self Help Group And Natural Farmers Produce Sale Outlet And Cafeteria On The Terrace Of Farmers Hostel At Kvk/ Rhrts Kandaghat, Solan (Sh- Civil Work)
Tender Value
13.47 Lakhs
Estimated cost
Bid Submission
12 Apr 2023
0 days left
EMD
27000
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
kandaghat → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Women Self Help Group And Natural Farmers Produce Sale Outlet And Cafeteria On The Terrace Of Farmers Hostel At Kvk/ Rhrts Kandaghat, Solan (Sh- Civil Work)
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas on all depths and widths including getting out and disposal of all excavated earth in all leads, lifts and carriage of material as directed by the Engineer-in-Charge. a). Ordinary rock. |
| 2 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete in all respect as per satisfaction of Engineer-in-Charge. |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level complete in all respect as per satisfaction of Engineer-in-Charge a). 1:5:10 (1 cement: 5 coarse sand): 10 graded stone aggregate 40 mm nominal size). |
| 4 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases andspiral stair cases above plinth level up to floor five level, excluding thecost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (one cement : one & half coarse sand : three graded stone aggregate 20 mm(twenty milimetre) nominal size) etc. complete in all respect as per satisfaction of Engineer-in-Charge. |
| 5 | Centering and shuttering including strutting, propping etc. and removal of form for etc. complete in all respect as per satisfaction of Engineer-in-charge. |
| 6 | a). Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 7 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level etc. complete in all respect as per satisfaction of Engineer-in-Charge. a) Cold twisted bars. |
| 8 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth level with Cement mortar 1:6 (one cement : six sand) complete in all respect as per satisfaction of Engineer-in-charge. |
| 9 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to all floor level with cement mortar 1:6 (one cement : Six sand) etc. complete in all respect as per satisfaction of Engineer-in-charge. |
| 10 | Half brick masonry with common burntclay F.P.S. (non modular)bricksofclassdesignation7.5 in superstructure above plinth level up to all floor level with cement mortar 1:4 (one cement : four sand) etc. complete in all respect as per satisfaction of Engineer-in-charge. |
| 11 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete in all respect as per satisfaction of Engineer-in-Charge. |
| 12 | a). 250x16 mm (two hundred fifty into sixteen milimetre) |
| 13 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screwsetc. complete in all respect as per satisfaction of Engineer-in-Charge. |
| 14 | a). 200x10 mm(two hundred into ten milimetre) |
| 15 | b). 150x10mm(one hundred fifty into ten milimetre) |
| 16 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete in all respect as per satisfaction of Engineer-in-Charge. |
| 17 | a).125mm (One hundred twenty five milimetre) |
| 18 | b). 100mm ( One hundred milimetre) |
| 19 | Providing and fixing 18 mm thick Pre-laminated medium density fibre board IS: 14587:1998 marked, with one side decorative lamination other side balancing lamination Grade-I(exterior grade) in shelves with screws and fittings wherever required,edges to be sealed with PVC edge bending tape 2.00 mm thick of approved brand etc. complete in all respect as per satisfaction of Engineer-in-Charge (Actiontesa/ Green/Century plymake) (fittings to be paid separately). |
| 20 | Providing and fixing 25mm thick pre-laminated medium density fibre board exterior grade ( Grade-I) IS:14587:1998 marked with one side decorative and other side balancing lamination for cupboard shutters edges to be sealed with PVC edge bending tape 2.00 mm thick of approved brand including ISI marked nickel plated bright finishing M.S. piano hinges conforming to IS:3818 marked with necessary screw etc complete in all respect as per satisfaction of Engineer-in-Charge (Actiontesa/ Green / Century ply make). |
| 21 | Providing and fixing PVC Door Frame of size 50x47 mm with a wall thickness of 5 mm (± 0.2 mm), made out of single piece extruded PVC profile, with mitred cut joints and joint with 2 nos of PVC bracket of size 190 mm x 100 mm long arms of cross section size 35 x 15 mm & self driven self taping screws, the vertical door profiles to be reinforced with 40x20 mm M.S. rectangular tube of 0.8 mm , including providing EPDM rubber gasket weather seal throughout the frame, including jointing 5 mm PVC frame strip with PVC solvent cement on the back of the profile. The door frame to be fixed to the wall using 8 x100 mm long anchor fasteners complete, all as per manufacturer\"s specification and direction of Engineer -in- charge. |
| 22 | 35 mm thick factory made Solid panel PVC Door shutter, made out of single piece extruded soild PVC profiles, 5 mm (± 0.2 mm) thick, having styles & rails (except lock rail) of size 95 mmx 35 mm x 5 mm, out of which 75 mm shall be flat and 20 mm shall be tapered (on both side), having one side thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power, including reinforcing with MS tube of size 40 mm X 20 mm x 1 mm, joints of styles & rails to be mitered cut & joint with the help of PVC solvent cement, self driven self tapping screws & M.S. rectangular pipes bracket of size 190 mm X 100 mm of cross section size 35 mm x 17 mm x 1 mm at each corner. Single piece extruded 5 mm thick solid PVC Lock rail of size 115 mm x 35 mm, out of which 75 mm to be flat and 20 mm to be tapered at both ends, having 15 mm solid core in middle of rail section integrally extruded, fixing the styles & rails with the help of solvent and self driven self tapping screws of 125 mm x 11 mm, including providing 5 mm Single piece solid PVC extruded sheet inserted in the door as panel, all complete as per manufacturer\"s specification and direction of Engineer-in-charge.a) Non decorative finish (matt finish) |
| 23 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primeretc. complete in all respect as per satisfaction of Engineer-in-Charge. |
| 24 | Hollow MS pipe welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using tube etc. as required. complete in all respect as per satisfaction of Engineer-in-Charge. a).In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. |
| 25 | Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shuttersetc. complete in all respect as per satisfaction of Engineer-in-Charge. a). 80 x 1.25 mm M.S. laths with 1.25 mm thick top cover |
| 26 | Providing and fixing ball bearing for rolling shutters etc. complete in all respect as per satisfaction of Engineer-in-Charge. |
| 27 | Providing and fixing 1st quality ceramicglazedfloor tiles (Kazaria / Nitco / Oreintbell make)conformingto IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy,bottlegreen,blackof any size as approved by Engineer-in-Charge inskirting,risersofsteps and dado over 12 mm thick bed of cement Mortar 1:3(onecement:three sand) and jointing with grey cement slurry @ 3.3Kilogram per Square Metreincludingpointinginwhitecementmixedwithpigment of matching shade etc. complete in all respect as per satisfaction of Engineer-in-charge. |
| 28 | Providing and laying Antiskid vitrified floor tiles full bodyin different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, (Kazaria/ Nitco/ Orient bell make), in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete complete in all respect as per satisfaction of Engineer-in-Charge.a). Size of tile 600x600mm |
| 29 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (one cement : four coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. a). Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. |
| 30 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required etc. complete in all respect as per satisfaction of Engineer-in-Charge.(TATA/ JINDAL MAKE) |
| 31 | Providing and fixing precoated galvanised steel sheet Ridges plain (500 - 600mm) 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete in all respect as per satisfaction of Engineer-in-Charge.(TATA/ JINDAL MAKE) |
| 32 | 15 mm (fifteen milimetre thick) cement plaster on rough side of single or half brick wall of mix with cement mortar 1:6 (one cement: six sand) complete in all respect as per satisfaction of Engineer-in-Charge. |
| 33 | Finishing walls with Acrylic Smooth exterior paint of required shade with New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm). |
| 34 | Painting with oil type wood preservative of approved brand and manufacture work etc. complete in all respect as per satisfaction of Engineer-in-Charge. a) New work (two or more coats) |
| 35 | Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade etc. all complete as specified and as directed by the Engineer-in-Charge. a)Two or more coats on new work |
| 36 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within all leads etc. complete as per direction of Engineer-in-charge. a). In cement mortar |
| 37 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm PVC P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required complete in all respect as per satisfaction of Engineer-in-Charge. (Cera / Hindware make).a) White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. |
| 38 | Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required complete in all respect as per satisfaction of Engineer-in-Charge(Cera/ Hindware make). |
| 39 | a). Single half stall urinals with 5(Five) litre P.V.C. automatic flushing cistern. |
| 40 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required complete in all respect as per satisfaction of Engineer-in-Charge (Cera / Hindware make). a)White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap |
| 41 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever requiredetc. complete in all respect as per satisfaction of Engineer-in-Charge a). 610x510 mm bowl depth 200mm |
| 42 | Providing and fixing32mm dia P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings etc. complete in all respect as per satisfaction of Engineer-in-Charge. |
| 43 | Providing and fixing 600x450mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers etc. complete in all respect as per satisfaction of Engineer-in-Charge. |
| 44 | Providing and fixing Internal G.I. pipes (medium grade) complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. complete in all respect as per satisfaction of Engineer-in-Charge. (Jindal/ Surya make) a). 15 mm nominal dia.. |
| 45 | Providing and fixing G.I. pipes medium grade complete with G.I. fittings including trenching and refilling etc. complete in all respect as per satisfaction of Engineer-in-charge. (Jindal / Surya make) a). 15 mm dia nominal bore |
| 46 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipeetc. complete in all respect as per satisfaction of Engineer-in-Charge .a).25 to 40 mm nominal bore |
| 47 | Providing and fixing brass bib cock of approved quality complete in all respect as per satisfaction of Engineer-in-Charge. a) 15 mm nominal bore. |
| 48 | Providing and fixing uplasticised PVC connection pipe with brass unions etc. complete in all respect as per Engineer-in-Charge. a). 15 mm nominal bore |
| 49 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 Sintex marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank etc. complete in all respect as per satisfaction of Engineer-in-charge. |
| 50 | Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS:8931 complete in all respect as per satisfaction of Engineer-in-Charge (Sieko/ smile/ zar/ sparton make). |
| 51 | Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 complete in all respect as per satisfaction of Engineer-in-Charge. (Sieko/ smile/ zar/ sparton make). |
| 52 | Cutting holes up to 30x30 cm in walls including making good the same with common burnt clay F.P.S. (non modular) bricks complete in all respect as per satisfaction of Engineer-in-Charge. |
| 53 | Constructing brick masonry manhole in cement mortar 1:4 ( one cement : four coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (one cement : one & half coarse sand (zone- III) : three graded stone aggregate 20 mm(twenty milimetre) nominal size), foundation concrete 1:4:8 mix (one cement : four coarse sand (zone- III) : eight graded stone aggregate 40 mm(forty milimetre) nominal size), inside plastering 12 mm thick with cement mortar 1:3 (one cement : three coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (one cement :two coarse sand : four graded stone aggregate 20 mm(twenty milimetre) nominal size) finished with a floating coat of neat cement complete as per standard design complete in all respect as per satisfaction of Engineer-in-Charge. a). Inside size 900x800mm and 450mm deep including 450x610mm dia opening (medium duty) SFRC Man hole cover with frame. ) With common burnt clay F.P.S. (non modular) bricks of class designation 7.5. |
| 54 | Providing and fixing 12mm thick prelaminated particle boardwith decorative lamination on both side flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete complete in all respect as per satisfaction of Engineer-in-Charge(Actiontesa/ Green/ century ply make). |
| 55 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge ) (Jindal / Hindalco make) (Glazing, paneling and dash fasteners to be paid for separately) : |
| 56 | a). Powder coated aluminium (minimum thickness of powder coating 50 micron for fixed portion / frame work. |
| 57 | b).Powder coated aluminium (minimum thickness of powder coating 50 micron for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately). |
| 58 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item). a).With float glass panes of 4 mm thickness (weight not less than 10.00 kg/ Sqm). |
| 59 | Providing and fixing PVC floor trap with grating ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete in all respect as per satisfaction of Engineer-in-charge (Filolex / Kisan / D-Plast make).a) 110mmx75mm |
| 60 | Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete in all respect as per satisfaction of Engineer-in-charge (Finolex/Kisan/D-plast make). |
| 61 | a) 75mm dia (Seventy five millimetre) |
| 62 | b). 110mm dia (One hundred ten millimetre) |
| 63 | Providing and fixing PVC door bend with oval access door, insertion rubber washer 3mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete in all respect as per satisfaction of Engineer-in-charge (Finolex/Kisan/D-plast make). |
| 64 | a) 75mm dia |
| 65 | b). 110mm dia |
| 66 | Providing and fixing PVC collars ISI marked including fixing with approved adhesive etc. complete in all respect as per satisfaction of Engineer-in-charge (Finolex/Kisan/D-plast make). |
| 67 | a) 75mm dia |
| 68 | b). 110mm dia |
| 69 | Providing and fixing PVC plain bend ISI marked complete including fixing with approved adhesive etc. complete in all respect as per satisfaction of Engineer-in-charge (Finolex/Kisan/D-plast make). |
| 70 | a) 75mm dia |
| 71 | b). 110mm dia |
| 72 | Providing and fixing of 2.0mm thick PVC/Rubber tiles flooring, plain, coloured, morbed or mosaic or mattled finish, laid with approved brand adhesive on sub floor damp proofing treatment (to be measured separately) for payment complete in all respect. (LG/Tusker make) |
| 73 | Providing and fixing PVC gully trap with grating brick masonry chamber in cement mortar 1:5 and water tight SFRC cover with frame of 300mmx300mm size (inside) and 40 mm thick etc. complete in all respect as per satisfaction of Engineer-in-charge (Finolex/Vectus/D-plast make).A) 110mm dia P type. |
| 74 | Providing and fixing PVC Cowl ISI marked including fixing with approved adhesive etc. complete in all respect as per satisfaction of Engineer-in-charge (Finolex/Kisan/D-plast make). |
| 75 | a) 75mm dia |
| 76 | b). 110mm dia |
| 77 | Providing and fixing 12mm thick imported pine wood paneling/lining & ceiling with tongued and grooved jointing and wooden screws etc. complete in all respect as per satisfaction of Engineer-in-Charge (Frame work to be measured and paid for separately) |
| 78 | Polishing two coats with melamine polish of required shade on new wood and wood based surfaces to give an even surface including cleaning the surface of all dirt, dust and sand papered smooth and including a coat of wood filler complete in all respect as per satisfaction of Engineer-in-charge. |
| 79 | Providing and fixing 150 mm aluminium hooks and eyes with fittings etc. complete in all respect as per satisfaction of Engineer-in-Charge |
AI Tender Summary
Tender Timeline
Apr 04, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedApr 12, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedApr 12, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender