Department Of Tourism And Civil Aviation has published Tender For Repair And Maintenance Of Hptdb Office U S Club Shimla. Submission Date for this Tender is 10-04-2023. Building Work Tenders in Shimla Himachal Pradesh. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Providing wood work in trusses, purlins, rafters, posts, post plates, wall plates and the like wrought framed, hoisted and fixed in position.including carriage of materials by manual & mechnical means and loading/unloadinginall leads and lifts. |
| 2 | 2nd class deodar wood. |
| 3 | Providing corrugated G.I sheet roofing 0.63 mm thick of Tata make fixed with galvanised iron J.or L. hooks bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers etc. filled with white lead complete excluding the cost of purlins refters and trusses. as required as per the direction of Engineer-in-charge as required as per the direction of Engineer-in-charge. |
| 4 | Providing ridges or hips of width 60 cm overall width plain G.I. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers etc. complete i/c carriage of materails by manual & mechnical means loading/unloading etc. |
| 5 | 0.63 mm thick Tata make |
| 6 | Providing valleys of 90 cm wide overall in plain G.I. sheet fixed with polymer coated J, or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers etc. complete including carriage of materails by manual & mechnical means and loading/unloading etc. in all lead & lift. |
| 7 | 0.63 mm thick Tata make. |
| 8 | Structural steel works riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all completeas per the direction of Engineer-in-charge as required as per the direction of Engineer-in-charge. In beams, joinsts channels, angles, tees, flat, hollow section etc. with connecting plates or angles cleat as in main and cross beams hip & jack, rafters purlins connected to common and the i/c manual & mechnical carriage and loading/unloading etc. in all lead & lift. |
| 9 | Providing and fixing polycarbonated tranparent sheet 1.20mm thick of approved/standard make roofing with galvanised J or L hooks bolts and nuts with G.I. Limpet and bitumen rubber washer etc. complete with all accessories as required as per direction of Engineer-in-Charge. of direction of Engineer-in-charge. i/c manual and mechnical and loading/unloading etc. in all lead & lift |
| 10 | Providing and fixing water proof kit ply 9mm of standard quality ISI mark and approved shade and colour in panelling & wall linning i/c mitring at junctions, butt jointing and nails complete (Frame work for base to be measured & paid for separately) i/c manual & mechnical carriage of materails in all lead & lift. |
| 11 | Providing and fixing ACP (Alex/Alstone/Alstong) thermal characteristics (Linear thermal expansion=2.4 mm /m/100C, Deflection Temperature Resistance (-50 to+80 C )Acoustical Characteristics Sound transmission loss =27db and fire Characteristics AS PER INTERNATIONAL STANDARD 4MM x 0.25 mm sandwhictched with aluminium colis of aluminium alloys 5500 series with duponself adhesive paper and PVDF coatingof KYNAR 500 and aluminium section 25 x 50mm x 16 gauge superior quality SS screws , fastners ,silliconselalnt (DOWSIL 789) AND MASKING TAPE 3 modoublesided glazing tape according to drawings , with all acceseries complete including manual & mechnical carriage of materials in all leads and lifts. |
| 12 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including manual & mechnical of materails and loading/unloading etc. complete in all lead & lift. |
| 13 | Providing and fixing Coloured antiskid tiles 6 to 8 mm thick of approved/standard make Nitco/Kajaria in flooring treads of steps over a bed of 12 mm thk. cementmortar 1:3 (1 cement : 3 coarse sand) jointed with white cement slurry mixed with pigment to match the shade of tiles etc. complete,including manual & mechnical carriage ofcarriage of materailsin all lead, lift. |
| 14 | Providing and fixing 19mm thick water proof commercial boardof approved/standard make/brand shelves/box for cup board with butt joints & fixing with nails & screws etc complete) i/c manual and mechnicalcarriage of materails and loading/unloading etc. complete in all lead & lift. |
| 15 | Providing and fixing 19mm thick Commercial Board of approved/standard make/brand of water proof shutters for up boards i/c fixing with nickel plated piano hinges with screws etc complete) and manual & mechnical carriage of materails and loading and unloading etct. complete upto all lead & lift. |
| 16 | Providing and fixing 1.00mm thick colored or plain lamination sheet of standard/approved make (sun mica) on boards/ply wood sheets with approved adhesive and nails etc complete as per the direction of Engineer Inchargre including manual & mechnical carriage of materails and loading/unloading upto all lead & lift. |
| 17 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes, including ISI marked S.S. pressed butt hinges bright finished of required size with necessary screws also including carriage of materials inall leads and lifts. a) 30 mm thick, Second class teak wood i/c manual & mechnical carriage of materails and loading/unloading etc. complete. |
| 18 | Supplying and fixing glass panes with wooden beading and nails including removal of broken glass panes wherever necessary i/c manual & mechnical carriage i/c manual & mechnical carriage of materails and loading/unloading upto all lead & lift and disposal of rubbish from the site. |
| 19 | 4 mm thick forsted glass |
| 20 | 4 mm thick plain glass |
| 21 | Providing and laying Polished Granite stone flooring in required design/patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing curing, polishing and moulding/nosingetc. all complete as per specification and as directed by the Engineer-in-Charge. including loading/unloading etc. inall leads and lifts. 20mm.thick |
| 22 | Polished Granite stone slab jet Black |
| 23 | Providing and fixing 2mm thick PVC antistatic venyl Flooring plain or colored, curbed or mosaic/ metalled finish of standard/approved quality/brand laid with approved adhesive on sub-floor as directed by the Engineer-in-Charge manual & mechnical carriage of materials inall leads and lifts and loading/unloading in all lead & lift. |
| 24 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. i/c carriage complete : ( 125mm ), heavy duty. |
| 25 | Providing and fixing 65x35mm. special quality bright finished brass cup board locks or wardrobe locks with six levers including necessary screws etc. complete i/c carriage, Godrej make. |
| 26 | Providing and fixing S.S tower bolts (berrel type) anodized trans parent or dyed to required shade and colour with screws etc. complete i/c carriage. a) 150x10mm (Heavy duty). |
| 27 | Providing and fixing bright finished hydraulic door closer heavy duty fixed with necessary screw etc. complete i/ c carriage. |
| 28 | Painting two or morecoat(excluding priming coat)on previously painted wood and wood based surfaces with enamel paint to given and even shade including cleaning of all dirt,dust and other foreign matter sand papering and stoppingas directed by the Engineer-in-Charge. including carriage of materials inall leads and lifts |
| 29 | With white enemal paint, Asian/Nerolac |
| 30 | Extra coat over on above itemfor every subsequent coat of paint |
| 31 | Polishing twoor more coats with lecquer polish on wood and wood based surfaces to give an even surface including cleaning the surface of all dirt , dust and sand papered smooth and including a coat of wood filler. Including carriage of material in all lead and lifts. |
| 32 | 75 mm (Average thickness) with cement plaster in four coats cement plaster 1:4 (1 cement : 4 coarse sand) finished with a top layer 10 mm thick cement plaster 1:6 (1 cement : 6 fine sand) i/c providing and fixing chiken wire mesh & scaffolding complete. as per the direction of the Engineer Incharge i/c manual & mechnical carriage of materails in all lead & lift and loading/unloading etc. |
| 33 | Painting one coat (excluding priming coat)on previously painted concrete/ masonry/ plastered surface with 1st quality ready mixed paint/brushing for use on floors to give an even shade Painting one coat (excluding priming coat)on previously painted concrete/masonry/ plastered surface with ready mixed paint/brushing for use on floors to give an even shade |
| 34 | Extra coat over on above itemfor every subsequent coat of paint |
| 35 | With white enemal paint |
| 36 | Repair and cleaning of existing gutters and disposal of unserveable materials by manual & mechnical means. |
| 37 | Dismantling dhajji /mud wall plaster including stackingof serviceable materials and disposal of un-serviceable materials by manual & mechnical means in all lead & lift and loading/unloading etc. complete. |
| 38 | Dismantling tile work in floors and roofs laid in cement mortar including disposal of unserviceable materials through manual & mechnical means and loading/unloading in all lead & lift. |
| 39 | Providing and fixing dual hydraulic flushing cistern with standard/approved make for existing closet such aslead valve with polygthene float for connections i/c carriage of materials in all lead & lift and as per direction of Engineer Incharge. |
| 40 | Providing and fixing C.P Brass pillar tap with Capstan head i/c carriage of materails (a) 15mm dia, Jal Make or its equivalent of approved series |
| 41 | Providing and fixingCP brass angle cock JAL make cat no.9048 of approved and series or its equivalentincluding carriage of material up to all leads and lifts and as per direction of Engineer in charge . 15 mm Dia |
| 42 | Providing and fixing CP brass bib tap Jal cat no. 9032with capstan head 15mm dia Jal make of approved series or its equivalentincluding carriage of material to all lead and lift and as per directionof Engineer incharge. |
| 43 | Short body |
| 44 | Providing and installation of CO2 extinguisher 4.5kg as per IS 15683(2006) including carriage of material through mechanical and manualtransport in all lead and lift. |
| 45 | Providing and fixinggrating JALMake Cat No. 9336 or equivalent 100x100 mm nominal size including of carriage of material upto all leads and lifts. |
| 46 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion i/c manual & mechnical carriage of materao;s and loading/unloading in all lead & lift. (i) Single socketed pipes. |
| 47 | 110 mm diameter |
| 48 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion i/c manual & mechnical carriage and loading/unloading in all lead & lift.. |
| 49 | Coupler 110 mm |
| 50 | Plain bend 110 mm |
| 51 | Collar 110 mm |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
