|
| 1 | Dismantling all types of masonry excepting cement concrete plain or reinforced, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m. |
| 2 | Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works |
| 3 | Reinforcement for reinforced concrete work in all sorts of structures including distribution are,stirrups, binders etc including supply ofrods,inicial straightening and removal of loose rust (if necessary ,cutting of requisite length hooking and |
| 4 | Ordinary cement concrete (mix 3:1.5:1) M20 graded stone chips (20 mm down excluding shuttering and reinforcement, if necessary in ground Floor aspre IS 456-2000).) excluding shuttering. |
| 5 | 100 mm. thick brick work with Fly Ash Bricks set in cement sand mortar (1:4) including raking out joints, curing, scaffolding etc. complete in all respect. (a) In ground floor |
| 6 | M.S. structural works in roof trusses with tubular sectionsconforming to IS: 806-1968 & IS: 1161- 1998 ............................,....... all incidental chages such as electricity charges, labourinsurance charges etc. i) For trusses spanning up to 12.00 m |
| 7 | Supplying, fitting & fixing Zn-Al alloy coated (followed by colour coated ) steel sheet work and fixed with 10 mm dia of jorlook boltd,limpet& 3 mm th.bitumeen washer etc. complete with 150 mm end lap and one corrugation minimum side lap. (Payment to be made on area of finished work)............(i) In Roof:-a) With 0.5 mm thick sheet |
| 8 | Galvanised iron sheet ridging fitted with necessary bolts, screws, washers etc complete.(225mm end lapping).......(A) 300 mm lapping each way.(b) With 0.63 mm sheet |
| 9 | Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materails (Spun Yarn, Valamoid/Bitumen/M-Seal etc) complete. A) UPVC Pipes: (iii) 160 mm. Dia. [Page-187; Item-21 from PWD building schedule] |
| 10 | Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 75m as directed. |
| 11 | Plaster (to wall, floor, ceiling etc.) with sand and cement morter including rounding off or chamfering corners as directed and raking out joints or rougheningof concrete surface including chipping and application of cement slurry where necessary etc.In Grount floor |
| 12 | Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer\"s specification and as per direction of the EIC. In Ground Floor: (a) One CoatPage-196; Item No-08 |
| 13 | Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer\"s specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer.In Ground floor (Two Coat) a) Normal Acrylic Emulsion |
| 14 | Priming one coat on timber or plastered surface with synthetic oilbound primer of approved quality including smoothening surfaces by sand papering etc. |
| 15 | Painting with best, quality synthetic enamel paint with a coat of priming of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary.a) On Timber Surface, With super gloss (hi-gloss) Two coats (with any shade except white) |
| 16 | Providing & fixing Concrete Sign Board as per IRC specification of size 900 x 750 x 37 mm. thick made with RCC 1:1½:3 with pakur variety stone chips reinforced with double layer IRC febric (75 x 75 mm.mesh) and fixed with necessary nuts & bolts on two RC precast posts 100 mm. x 150 mm. of height 2.65 m. of which top 750 mm. is of .....both faces lettering sign marks etc. as per direction of the Engineer-in-Charge. |
