|
| 1 | Clearing and grubbing road land including uprooting wild vegatation ,grass, bushes,shrubs,saplins and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned upto lead of 1000 metc. as per technical specification cl 201(i) By Manual means ( B ) In area of non thorny jungle |
| 2 | Compacting original ground supporting embankment: Loosening, levelling and compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150mm, mixed with water at OMC and then compacted by rolling so as to achieve minimum dry density as given in Tables 300.1 and 300.2 for embankment construction as per technical specification clause 301.4.1 |
| 3 | Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m. as per technical specification clause 301.5 (a)From Private land |
| 4 | Construction of subgrade and earthen shoulders with approved material obtained from borrow pitrs with all lifts and leads, transporting to site,spreading,grading to required slope and compacted to meet requirement of table 300.2 with a lead upto 1000 m. as per technical specification clause 303.1 (a)From Private land |
| 5 | Granular Sub -base with Well Graded Material (Table 400.1) By Mix in place method Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavatorat OMC, and compacting with smoothwheelroller to achieve thedesired density, complete as per Technical Specification Clause 401.ii ) For Grading II Material |
| 6 | WBM Grading 3Using stone sceening Type- B 11.2mm for Gr. IIIProviding, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with threewheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405. (A) By Manual Means. |
| 7 | Interlocking concrete block pavement Providingand laying interlocking concrete block pavement (M40) having thickness 80mm as per technical specification clause 1504.A) Including Edge block/ Edge restraints |
| 8 | Providing and fixing of typical PMGSY informatory sign board with Logo as per MORD specifications and drawings. Three MS plates of 1,6mm thick, top and middle plate duly welded with MS flat iron 25mm x 5mm size on back on edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75mm of 12 SWG sheet tubes post duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. The top most diamond plate will be welded to the middle plate by 47mm x 47mm of 12 SWG steel plate tube. All MS will be stove enameled on both sides. Lettering and printing arrow, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and annexure 1700.1 |
| 9 | Providing & fixingof retro – reflectorised cautionary, mandatory and informatory sign as per IRC:67 made encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm 8 mm firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and technical specification Clause 801i) 900 mm equilateral triangle |
| 10 | Providing & fixingof retro – reflectorised cautionary, mandatory and informatory sign as per IRC:67 made encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm 8 mm firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and technical specification Clause 801ii) 600mm circular |
| 11 | Providing & fixingof retro – reflectorised cautionary, mandatory and informatory sign as per IRC:67 made encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm 8 mm firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and technical specification Clause 801ii) 800mm x 600mm rectangular |
| 12 | Reinforced cementconcrete M15 Grade Kilo Metre Stone/local stone ofstandard design as per IRC:8, fixing inposition including painting and printing etc as per drawing and Technical Specification clause 1703. (i) Ordinary Kilometer stone (Precast) |
| 13 | Reinforced cementconcrete M15 Grade Kilo Metre Stone/local stone ofstandard design as per IRC:8, fixing inposition including painting and printing etc as per drawing and Technical Specification clause 1703. (i) 200 meter stone (Precast) |
| 14 | Supplying, fitting and fixing RCC guard post150cm long erected 75cm above the groundand 75cm below the ground with M-15 grade(nominal mix 1:2:4 with broken stone aggregateup to 20mm size) of cement concrete andrequired reinforcement tied in position withannealed black wire including centering,moulding the top, curing including paintingconcrete surfaces in 23cm strips upto 0.75mfrom the top alternately in black and white andhaving 2 nos. reflective band of desired shadeetc. complete as per design and as directed. 15 cm dia. RCC guard post with reinforcement of 4nos. 12mm dia TMT mainsteel bars and 6mm TMT/ MS stirrups at 15cmc/c. |
| 15 | Turfing with Sods Furnishing and laying of the live sods of perennial turf forming grass on embankment slope, verges or other locations shown on the drawing or as directed by the Engineer including preparation of ground, fetching of sods and watering as per Technical Specification Clause 309. |
| 16 | RCC GuardWall & Saucer DrainEarth work in excavation of foundation of structures as per drawing and technical specifications Clause 305.1,including setting out,construction of shoring and bracing,removal of stumps and other deleterious material and disposal upto a lead of 50m,dressing of sides and bottom and backfilling with approved material. I. Ordinary soil upto 3 m depth |
| 17 | Providing brick soling on earthern shoulder with stone / best quality jhama brick, sand packed and laid to true line and level in panel after preparing the subgrade including earthwork in excavation as directed including all labour and material sand if necessary dewatering complete.A) Brick on flat soling. |
| 18 | Providing plain / reinforced cement concrete in open foundations complete as per drawings & technical specifications clause 802, 803, 1202 & 1203.(A) With crushed stonel.(IV) RCC Grade M-20 |
| 19 | Supplying, fitting and placing TMT (Fe-500 D) reinforcement bar(From Primary producer: TATA/ SAIL/ Esser Steel/ Jindal Steel/ Shyam steel/ RINL) in foundation complete as per drawing and technical specifications Clauses 1000 and 1202 |
| 20 | PCC 1:3:6 in Foundation (Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed,placed in foundation and compacted by vibration including curing for 14 days.) |
| 21 | Brick Masonry DrainEarth work in excavation of foundation of structures as per drawing and technical specifications Clause 305.1,including setting out,construction of shoring and bracing,removal of stumps and other deleterious material and disposal upto a lead of 50m,dressing of sides and bottom and backfilling with approved material. I. Ordinary soil upto 3 m depth |
| 22 | Laying brick soling layer on prepared subgrade with brick on end edging according to lines, graded and cross-section shown on the drawing filling joints with sand and earth, spreading 25mm thick layer of earth over brick soling, watering and rolling the same with three wheel road roller 80-100 KN as per technical specification clause 412 |
| 23 | PCC 1:3:6 in Foundation (Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed,placed in foundation and compacted by vibration including curing for 14 days.) |
| 24 | Brick msonry work in cement mortar in substructure complete excepting pointing and plastering, as per drawing and technical specification Clauses 602, 603, 604, 1202 & 1204 ii) In 1:4 cement mortar |
| 25 | Plastering with cement morter(1:4) 15 mm thick on brick work in sub structure as per technical specification. |
| 26 | Providing RCC post gate for restricting heavy vehicular trafficas per approved drawing and design in DPR and as directed by the Department. |
