Tender For Major Repair Of Road Work -Rj-11-17/Lsg Iii/Taranagar
Tender Value
1.44 Crore
Estimated cost
Bid Submission
10 Apr 2023
0 days left
EMD
2.89 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
taranagar → Rajasthan
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Major Repair Of Road Work -Rj-11-17 / Lsg Iii / Taranagar
BOQ
| Sl. No. | Item Description |
| 1 | RJ-11-17/LSG-III/Taranagar/2023-24 |
| 2 | Construction of embankment with approved materials deposited at site obtained from roadway cutting and excavation from drain and foundation or other structures graded and compacted to meet requirement of Tables 300-1 and 300-2 as per MoRTH Specification Clause 305.3 |
| 3 | Excavation for roadwork in soil with hydraulic excavator of0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross-sections, and transporting to the embankment location with a lift upto 1.5 m and lead upto 1000 m as per MoRTH Specification Clause 301.3 |
| 4 | Dismantling of flexible pavements and disposal of dismantled materials upto a lead of 100 m, stacking serviceable and unserviceable materials separately as per MoRTH Specification Clause 202 By Manual Means Bituminous Courses |
| 5 | Construction of granular sub-base by providing well graded material, spreading in uniform layers with Tractor Mount Grader on prepared surface, mixing by mix in place method with rotavatorat OMC, and compacting with smoothwheelroller to achieve thedesired density, complete as per MoRTH Specification Clause 401.For Grading III Material |
| 6 | Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 1 as per MoRTH Specification Clause 404. Using Crusher Broken Aggregate By manual means. |
| 7 | Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 2 as per MoRTH Specification Clause 404. Using Crusher Broken aggregateBy manual means. |
| 8 | Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base(WBM/WMM) including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per MoRTH Specification Clause 502. |
| 9 | Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with Hydraulic broom as per MoRTH Specification Clause 503. |
| 10 | Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A or Type B or Type C as per MoRTH Specification Clause 510. Case - II By Mechanical Means Bitumen (VG-30) |
| 11 | Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A, Type B and Type C as per MoRTH Specification Clause 511By Mechanical Means Case - II : Type B Bitumen (VG-30) |
| 12 | Constructionof Foundation / Inaugration Pedastal in 23 cm thickBrick masonry in CM 1:4ofsize1.20mx1.80mabovegroundlevelwithadequatefoundationincluding providingandfixingofGranitestoneofsize0.75mx0.60mwith engravinglettersand figures,cementplaster,whitewashingetc.completeasperdirectionofEngineerin charge |
| 13 | P&FMukhyaMantriSadakYojanalogoforroadsfundedbyStateroadfundhaving M.S.Definitionplateof1.6mmthicknessframetosteelhollowdsectionof75mmx 75mm,2.5mlongstoveenamelledpaintwithholdfastincludingpaintlogoasper approved design and colours. The logo shall be made out of 1.6mm thick circular plate fix on 1200mm x 150mm rectangular steel base plate 1.6mm thick, the base of circular shallbeplainatthejunctionofbaseplate.Thesizeofdefinitionplateshallbe 1500x600mmandembeddingthepostsbyM-15mixC.C.block300x300x600mm including lettering / writing and painting etc. complete in all respect |
| 14 | Dismantlingofcementconcretepavementsbymechanicalmeansusingpneumatictoolsbreakingto piecesnotexceeding0.02cuminvolumeandstockpilingatdesignatedlocationsanddisposalof dismantled materials upto a lead of 1000 m, stacking serviceable and unserviceable materials separately |
| 15 | Marking Centre Line and stop lines etc. on road as per IRC pattern with thermoplastic paint of approved quality and make with 8% glass beads laid on the road surface at temperature 1600C with a special applicator machine complete with a special applicator machine complete with labour material and traffic diversion arrangements. |
| 16 | Construction of granular sub-base by providing well graded material, spreading in uniform layers with Tractor Mount Grader on prepared surface, mixing by mix in place method with rotavatorat OMC, and compacting with smoothwheelroller to achieve thedesired density, complete as per MoRTH Specification Clause 401. For Grading I Material |
| 17 | Constructionof un-reinforced,doweljointedatexpansionandconstructionjointonly,plaincement concretepavement,thicknessasperdesign,overapreparedsubbase,with43gradecementorany othertypeasperClause602.2.2M30(Grade),coarseandfineaggregatesconformingtoIS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cumcapacityandappropriateweighbatcherusingapprovedmixdesign, laidinapprovedfixedside formwork(steelchannel,layingandfixingof125micronthickpolythenefilm,wedges,steelplates including levelling the formworkasper drawing),spreading the concrete with shovels,rakes, compacted usingneedle,screedandplatevibratorsandfinishedincontinuousoperationincludingprovisionof contractionandexpansion,constructionjoints,applyingdebondingstrips,primer,sealant,dowelbars, nearapproachestobridge/culvertandconstructionjoints,admixturesasapproved,curingofconcrete slabs for 14-days, using water finishing to lines and grade as per drawing and MoRTH Specification Clause 602 including vaccum dewatering process with all required equipments |
AI Tender Summary
Tender Timeline
Apr 03, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedApr 10, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedApr 11, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender