Tender For Providing Additional Facilities To Kodumudi Bus Standin Kodumudi Town Panchayat.
Tender Value
14.70 Lakhs
Estimated cost
Bid Submission
05 Apr 2023
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
14.70 Lakhs
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
kodumudi → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Providing Additional Facilities To Kodumudi Bus Standin Kodumudi Town Panchayat.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work open excavation and depositing on bank with in the initial lead of 10m and a lift of 2m in hard stiff clay, stiff block cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders etc. complete. Complying with Standard Specifications as per SS 20 BMORTH 24 & 25 |
| 2 | Plain Cement Concrete 1:4:8 Mix (one part ofcement, four part of sand and eightpart of aggrigate) using 40 mm size ISS HBG metal from approved quarry including cost and conveyance of all materials to site. Loading and unloading charges and labour charges for mixing. Laying and curing etc. complete. Complying with Standard Specifications as per TNDSS No. 28 V, VI (S2) V,VI (S5A) VII |
| 3 | Supplying and errectingsteelcentering to sides and soffits including supports and struttingfor side wallsides andculvert body wall sidesusing M.S Sheets of size90cm x 60cm and B.G 10stifenedwith welded mild steel angles of size 25mm x 25mm x 3mm for boardinglaid over( silver oak joists ) of size 10cm x 6.50cm spread at about 90cm including all labour charges and cost and conveyance of all materials to site etc. complete Complying with Standard Specification as per TNDSS No.30&86 (For Drain,Deck slab & Retainingwall) |
| 4 | Plain Cement Concrete 1:2:4 (one cement, twoM Sandand four coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour chargesetc., complete as per standard specification |
| 5 | Supply and Fixing of TNEB meter Board suitable for 32A Single Phase Service connection with 32A Fuse unit (500V) 32A neutral link and earth link (1\" x 1/8\" Copper Flat) on TW Plank of Size 375mm x 300mm x 19mm with Supporting TW Reepers of 1\" thick an either side with Painting with Suitable bolt and nuts for fixing the TW Plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB Meter to Fuse Unit (SD No :125) |
| 6 | Supply and run of 4x6 sqmmpvc insulated sc unsheathedn cu.conductor of 1100V grade on 7/20 GI bear wire for service connection mains SD68 |
| 7 | Supply and run of 4x6 sqmmpvc insulated sc unsheathedn cu.conductor of 1100V grade 25mm GI Pipe suitable bent at both ends with necessary angle on upright and end supportformains SD 72 |
| 8 | Supply and fixing of 8 port PoE SWITCHES FOR CCTV IP CAMERA including all material and labour charges etc complete, as per specifications |
| 9 | ALIMINUUM FIXED WINDOWSupplying fabricating and fixing in position of Alumi,Anod natural colour matt finish fixed window with three panels using 62*38*[email protected]/m extruded box section as verticals and horizontal member and fixing 4mm thick plain/ frosted /pin headed glass approved qulatiy with necessary glazing chips rubber beading etc,.Necessary dismantling making necessary holes in RCC coloumns, Beams or masonry wherever necessary with power drill to the extent required and made good to the original conditions after fixing as drected by the departmental officers The Aluminium surfaces should be anodised with matt finish under electrically conditionin accordance withISspecification 1868/1962 of Anodic thickness of not less than 15 microns (fifteen) complete.All the materials should be got approved by the Engineer incharge before fixing as directed . |
| 10 | Aluminium Door Single leaf size 2.10mx1.00m Supplying fabricating and fixing in position of Alumi,Anod natural colour matt finish door half glazed and half PLB board using 12mm thick PLB board and 5.50mm thick glazed door using rectangular AW.Box section of following sizes for frame and shutter with necessary accessories such as rubber beading . A1 chips Best double action floor spring .Aluminium handles on both sides floor stopper , Tower bolt locks and glass including materilas labour , power consept ion charges required for fabrication if necessary chipping ,dismantling making necessary holes in RCC coloumns, Beams or masonry wherever necessary with power drill to the extent required and made good to the original conditions after foxong etc., complete . The Alimi surface must be anodised with matt finish under electrically controlled condition in accordance with is specification 1868/1962 of Anodic thickness of not less than 15 microns (fifteen) for all sections . All the materials should be got approved by the Engineer incharge before fixing as directed . |
| 11 | Supply and fixing ofARMOURED LAN & CCTV CABLE CAT-6 including all material and labour charges etc complete, as per specifications |
| 12 | Supply and fixing of Network for cctv recorderincluding all material and labour charges etc complete, as per specifications |
| 13 | Supply and fixing ofDURIAN 3 - Seater Stainless Steel Benches and With Back Rest SURFACE MOUNT STAINLESS STEEL BENCH conforming to RDSO specn including all material and labour charges etc complete, as per specifications |
| 14 | Supply and fixing of 150W LED Street Light Fitting with LED including all material and labour charges etc complete, as per specifications |
AI Tender Summary
Tender Timeline
Apr 03, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedApr 05, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedApr 05, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender